DC/DC Converters TDR 2 Series, 2 Watt UL 60950-1 Features Compact design in SMD or DIP package Wide 2:1 input voltage range Fully regulated outputs Low ripple and noise No minimum load required Temperature range -40C to +85C without derating I/O isolation 1500 VDC Continuous short-circuit protection Remote On/Off control Fully RoHS compliant 3-year product warranty The TDR-2 series is a family of compact 2 W dc/dc-converters with 2:1 input voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to 85C without power derating, continuous short circuit protection and excellent immunity against environmental influences make these converters very reliable. A TDR-2 converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code DIP models TDR 2-0511 Order code SMD models TDR 2-0511SM TDR 2-0512 TDR 2-0512SM TDR 2-0513 TDR 2-0513SM TDR 2-0522 TDR 2-0522SM Input voltage range Output voltage 5.0 VDC 4.5 - 9.0 VDC (5 VDC nominal) 12 VDC Output current max. 400 mA 167 mA Efficiency typ. 80 % 81 % 15 VDC 134 mA 83 % 12 VDC 83 mA 81 % TDR 2-0523 TDR 2-0523SM 15 VDC 67 mA 82 % TDR 2-1211 TDR 2-1211SM 5.0 VDC 400 mA 81 % TDR 2-1212 TDR 2-1212SM 12 VDC 167 mA 81 % TDR 2-1213 TDR 2-1213SM TDR 2-1222 TDR 2-1222SM TDR 2-1223 9 - 18 VDC 15 VDC 134 mA 84 % 12 VDC 83 mA 83 % TDR 2-1223SM 15 VDC 67 mA 82 % (12 VDC nominal) TDR 2-2411 TDR 2-2411SM 5.0 VDC 400 mA 81 % TDR 2-2412 TDR 2-2412SM 12 VDC 167 mA 84 % TDR 2-2413 TDR 2-2413SM TDR 2-2422 TDR 2-2422SM TDR 2-2423 18 - 36 VDC 15 VDC 134 mA 84 % 12 VDC 83 mA 84 % TDR 2-2423SM 15 VDC 67 mA 84 % (24 VDC nominal) TDR 2-4811 TDR 2-4811SM 5.0 VDC 400 mA 81 % TDR 2-4812 TDR 2-4812SM 12 VDC 167 mA 82 % TDR 2-4813 TDR 2-4813SM 15 VDC 134 mA 82 % TDR 2-4822 TDR 2-4822SM TDR 2-4823 TDR 2-4823SM http://www.tracopower.com 36 - 75 VDC (48 VDC nominal) 12 VDC 83 mA 83 % 15 VDC 67 mA 83 % Page 1 of 4 DC/DC Converters TDR 2 Series 2 Watt Input Specifications Input current at no load (nominal input voltage) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 40 mA typ. 20 mA typ. 10 mA typ. 7 mA typ. Input current at full load (nominal input voltage) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 520 mA typ. 215 mA typ. 105 mA typ. 55 mA typ. Surge voltage (1 sec. max.) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 15 V max. 25 V max. 50 V max. 100 V max. Input filter capacitor type (see EMC considerations page 3 for compliance to EN 55022 class A/B) ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A Radiated immunity EN 61000-4-3 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 1 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 F, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reflected ripple current (measured with input filter according class A) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 80 mAp-p typ. 40 mAp-p typ. 30 mAp-p typ. 20 mAp-p typ. Output Specifications Voltage set accuracy 1 % max Regulation - Input variation Vin min. to Vin max. - Load variation 0 - 100 % single output models: dual output models: - Load variation 10 - 90 % single output models: dual output models: - Load cross regulation 25/100 % 0.2 % max. 1.0 % max. 1.0 % max. balanced load 0.5 % max. 0.8 % max. balanced load 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) 30 mVp-p typ. Start up time (constant resistive load) - Power On 5 ms typ. - Remote On 5 ms typ. Transient response setting time (25 % load step change) 250 s typ. Short circuit protection indefinite, automatic recovery Capacitive load 5 12 15 12 15 VDC VDC VDC VDC VDC models: models: models: models: models: 1680 F max. 820 F max. 680 F max. 470 F max. 330 F max. General Specifications Temperature ranges - Operating -40C to +85C (with no derating) - Storage -55C to +125C - Case temperature +100C max. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TDR 2 Series 2 Watt General Specifications Humidity (non condensing) 5 % to 90 % rel. H max. Thermal shock acc. MIL-STD-810F Vibration acc. MIL-STD-810F Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >2.8 Mio h Isolation voltage (60sec.) - Input/Output 1500 VDC Isolation capacitance - Input/Output 50 pF max. Isolation resistance - Input/Output (500 VDC) >10 GOhm Altitude during operation tba. Safety standard (designed to meet) IEC/EN 60950-1, UL 60950-1 Safety approvals - UL/cUL www.ul.com -> certifications -> File: e188913 Switching frequency 100 kHz (PWM) Remote On/Off - On: open or high impedance - Off: 2...4 mA current applied via 1KOhm resistor - Off stand by input current 2.5 mA max. Environmental compliance - Reach www.tracopower.com/products/tdr2-reach.pdf - RoHS RoHS directive 2011/65/EU EMC Consideration +Vin C1 +Vout TDR 2 dc/dc-converter Com -Vin -Vout Load L1 Recommended filter for EN 55022 class A compliance 2) 1) 1) for single output models 2) for dual output models C3 C1 5 VDC 10 F / 25 V 1812 MLCC 12 VDC 6.8 F / 50 V 1812 MLCC 24 VDC 4.7 F / 50 V 1812 MLCC 48 VDC 4.7 F / 100 V 1812 MLCC C3 220pF / 3 kV 1808 MLCC L1 Recommended filter for EN 55022 class B compliance C1 C2 L1 value order code (SMD type) datasheet 2.2 H TCK-059 www.tracopower.com/products/tck059.pdf 18 H TCK-046 www.tracopower.com/products/tck046.pdf +Vin +Vout TDR 2 dc/dc-converter Com. -Vin -Vout Load Input models 2) 1) 1) for single output models 2) for dual output models C3 Input models 5 VDC 12 VDC 24 VDC 48 VDC C1 & C2 C3 10 F / 25 V 1812 MLCC 2.2 F / 50 V 1812 MLCC 2.2 F / 100 V 1812 MLCC 220pF / 3 kV 1808 MLCC L1 value order code (SMD type) datasheet 2.2 H TCK-059 www.tracopower.com/products/tck059.pdf 18 H TCK-046 www.tracopower.com/products/tck046.pdf 27 H TCK-063 www.tracopower.com/products/tck063.pdf 18 H TCK-046 www.tracopower.com/products/tck046.pdf All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TDR 2 Series 2 Watt Pysical Specifications Casing material non-conductive plastic (UL94V-0 rated) Package weight 4.5 g (0.16 oz) Soldering profile for DIP-package models max. 265C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Environmental compliance - Reach www.tracopower.com/products/tdr2-reach.pdf - RoHS RoHS directive 2011/65/EU Packaging - Tube 10 pcs packing unit - Tape & Reel (only SMD models, add suffix -TR) 200 pcs packing unit Outline Dimensions DIP-Models Pin-Out 0.25 (0.01) 13.55 (0.533) 0-15 1.8 2.54 6 18.9 (0.74) 9 top view (0.1) 7 Dual -Vin (GND) -Vin (GND) 2 Remote On/Off Remote On/Off 6 NC Common 7 NC -Vout 8 +Vout +Vout 9 -Vout Common 14 +Vin (Vcc) +Vin (Vcc) NC = not to connect 2 14 Single 1 1 0.25 (0.01) Recommended Solder Pad Dimension: 0-4 7.4 (0.29) 18.1 (0.71) 10.16 6 1.8 2.54 7 9 1.8 (0.07) 8 18.9 (0.74) (0.1) (0.1) 12.8 (0.50) top view 2.54 (0.4) 1.8 2.54 (0.07) (0.1) 10.16 8.7 (0.35) 1.5 (0.06) 1.0 (0.04) 2.54 17.2 (0.68) 2.0 (0.08) (0.4) 1.2 (0.05) (0.07) (0.1) SMD-Models 8 (0.4) 10.16 2.54 12.8 (0.50) (0.07) (0.1) (0.15) 1.3 (0.05) 3.8 0.8 (0.03) 8.7 (0.35) Pin 2 14 1 Dimensions in [mm], () = Inch Tolerances: 0.5 (0.02) Pin pich tolerances: 0.25 (0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. June 10. 2013 Page 4 of 4