http://www.tracopower.com Page 1 of 4
DC/DC Converters
TDR 2 Series, 2 Watt
Features
Compact design in SMD or DIP package
Wide 2:1 input voltage range
Fully regulated outputs
Low ripple and noise
No minimum load required
Temperature range –40°C to +8C
without derating
I/O isolation 1500 VDC
Continuous short-circuit protection
Remote On/Off control
Fully RoHS compliant
3-year product warranty
The TDR-2 series is a family of compact 2 W dc/dc-converters with 2:1 input volt-
age ranges and tightly regulated output voltages even under no load conditions.
The product is available in SMD-package or in DIP-package. They work with high
efficiency over the full load range and come with a remote On/Off input.
The usability in temperature ranges of up to 85°C without power derating, continu-
ous short circuit protection and excellent immunity against environmental influences
make these converters very reliable.
A TDR-2 converter is the ideal solution for space critical high end applications in
communication equipment, instrumentation and industrial electronics.
Order code
DIP models
Order code
SMD models Input voltage range Output voltage Output current
max. Efficiency typ.
TDR 2-0511 TDR 2-0511SM 5.0 VDC 400 mA 80 %
TDR 2-0512 TDR 2-0512SM 12 VDC 167 mA 81 %
TDR 2-0513 TDR 2-0513SM 4.5 – 9.0 VDC 15 VDC 134 mA 83 %
TDR 2-0522 TDR 2-0522SM (5 VDC nominal) ±12 VDC ±83 mA 81 %
TDR 2-0523 TDR 2-0523SM ±15 VDC ±67 mA 82 %
TDR 2-1211 TDR 2-1211SM 5.0 VDC 400 mA 81 %
TDR 2-1212 TDR 2-1212SM 12 VDC 167 mA 81 %
TDR 2-1213 TDR 2-1213SM 9 – 18 VDC 15 VDC 134 mA 84 %
TDR 2-1222 TDR 2-1222SM (12 VDC nominal) ±12 VDC ±83 mA 83 %
TDR 2-1223 TDR 2-1223SM ±15 VDC ±67 mA 82 %
TDR 2-2411 TDR 2-2411SM 5.0 VDC 400 mA 81 %
TDR 2-2412 TDR 2-2412SM 12 VDC 167 mA 84 %
TDR 2-2413 TDR 2-2413SM 18 – 36 VDC 15 VDC 134 mA 84 %
TDR 2-2422 TDR 2-2422SM (24 VDC nominal) ±12 VDC ±83 mA 84 %
TDR 2-2423 TDR 2-2423SM ±15 VDC ±67 mA 84 %
TDR 2-4811 TDR 2-4811SM 5.0 VDC 400 mA 81 %
TDR 2-4812 TDR 2-4812SM 12 VDC 167 mA 82 %
TDR 2-4813 TDR 2-4813SM 36 – 75 VDC 15 VDC 134 mA 82 %
TDR 2-4822 TDR 2-4822SM (48 VDC nominal) ±12 VDC ±83 mA 83 %
TDR 2-4823 TDR 2-4823SM ±15 VDC ±67 mA 83 %
Models
UL 60950-1
http://www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TDR 2 Series 2 Watt
Input Specifications
Input current at no load (nominal input voltage) 5 Vin models: 40 mA typ.
12 Vin models: 20 mA typ.
24 Vin models: 10 mA typ.
48 Vin models: 7 mA typ.
Input current at full load (nominal input voltage) 5 Vin models: 520 mA typ.
12 Vin models: 215 mA typ.
24 Vin models: 105 mA typ.
48 Vin models: 55 mA typ.
Surge voltage (1 sec. max.) 5 Vin models: 15 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Input filter capacitor type (see EMC considerations page 3
for compliance to EN 55022 class A/B)
ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
Radiated immunity EN 61000-4-3 10 V/m, perf. criteria A
Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV perf. criteria A
with external input capacitor e.g. Nippon
chemi-con KY 220 µF, 100 V, ESR 48 mOhm
Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
Reflected ripple current 5 Vin models: 80 mAp-p typ.
(measured with input filter according class A) 12 Vin models: 40 mAp-p typ.
24 Vin models: 30 mAp-p typ.
48 Vin models: 20 mAp-p typ.
Output Specifications
Voltage set accuracy ±1 % max
Regulation – Input variation Vin min. to Vin max. 0.2 % max.
– Load variation 0 – 100 % single output models: 1.0 % max.
dual output models: 1.0 % max. balanced load
– Load variation 10 – 90 % single output models: 0.5 % max.
dual output models: 0.8 % max. balanced load
– Load cross regulation 25/100 % 5.0 % max. (dual output models)
Minimum load 0 % of rated max. load
Temperature coefficient ±0.02 %/K
Ripple and noise (20 MHz bandwidth) 30 mVp-p typ.
Start up time – Power On 5 ms typ.
(constant resistive load) – Remote On 5 ms typ.
Transient response setting time (25 % load step change) 250 µs typ.
Short circuit protection indefinite, automatic recovery
Capacitive load 5 VDC models: 1680 µF max.
12 VDC models: 820 µF max.
15 VDC models: 680 µF max.
±12 VDC models: ±470 µF max.
±15 VDC models: ±330 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C (with no derating)
– Storage –55°C to +125°C
– Case temperature +100°C max.
http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TDR 2 Series 2 Watt
EMC Consideration
Recommended filter for
EN 55022 class A compliance
Input models C1 C3 L1
value
order code
(SMD type)
datasheet
5 VDC 10 µF / 25 V 1812 MLCC 2.2 µH TCK-059 www.tracopower.com/products/tck059.pdf
12 VDC 6.8 µF / 50 V 1812 MLCC
24 VDC 4.7 µF / 50 V 1812 MLCC 220pF / 3 kV 1808 MLCC 18 µH TCK-046 www.tracopower.com/products/tck046.pdf
48 VDC 4.7 µF / 100 V 1812 MLCC
General Specifications
Humidity (non condensing) 5 % to 90 % rel. H max.
Thermal shock acc. MIL-STD-810F
Vibration acc. MIL-STD-810F
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.8 Mio h
Isolation voltage (60sec.)Input/Output 1500 VDC
Isolation capacitance Input/Output 50 pF max.
Isolation resistance Input/Output (500 VDC) >10 GOhm
Altitude during operation tba.
Safety standard (designed to meet) IEC/EN 60950-1, UL 60950-1
Safety approvals – UL/cUL www.ul.com -> certifications -> File: e188913
Switching frequency 100 kHz (PWM)
Remote On/Off On: open or high impedance
Off: 2...4 mA current applied via 1KOhm resistor
Off stand by input current 2.5 mA max.
Environmental compliance – Reach www.tracopower.com/products/tdr2-reach.pdf
– RoHS RoHS directive 2011/65/EU
TDR 2
dc/dc-converter
Load
L1
C1
C3
+Vin
-Vin
+Vout
-Vout
Com 2)
1)
Input models C1 & C2 C3 L1
value
order code
(SMD type)
datasheet
5 VDC 10 µF / 25 V 1812 MLCC 2.2 µH TCK-059 www.tracopower.com/products/tck059.pdf
12 VDC 18 µH TCK-046 www.tracopower.com/products/tck046.pdf
24 VDC 2.2 µF / 50 V 1812 MLCC 220pF / 3 kV 1808 MLCC 27 µH TCK-063 www.tracopower.com/products/tck063.pdf
48 VDC 2.2 µF / 100 V 1812 MLCC 18 µH TCK-046 www.tracopower.com/products/tck046.pdf
Recommended filter for
EN 55022 class B compliance TDR 2
dc/dc-converter
Load
L1
C1 C2
C3
+Vin
-Vin
+Vout
-Vout
2)
1)
Com.
1) for single output models
2) for dual output models
1) for single output models
2) for dual output models
Page 4 of 4
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TDR 2 Series 2 Watt
Outline Dimensions
Pin Single Dual
1–Vin (GND) –Vin (GND)
2Remote On/Off Remote On/Off
6NC Common
7NC –Vout
8+Vout +Vout
9–Vout Common
14 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. June 10. 2013
Dimensions in [mm], () = Inch
Tolerances: ±0.5 (±0.02)
Pin pich tolerances: ±0.25 (±0.01)
Pysical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Package weight 4.5 g ( 0.16 oz)
Soldering profile for DIP-package models max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Environmental compliance – Reach www.tracopower.com/products/tdr2-reach.pdf
– RoHS RoHS directive 2011/65/EU
Packaging – Tube 10 pcs packing unit
Tape & Reel (only SMD models, add suffix –TR) 200 pcs packing unit
18.9
8.7
12.8
13.55
(0.74)
(0.35)
(0.533)
(0.50)
3.8
(0.15)
0.8(0.03)
1.3(0.05)
top view
14
9
8
1
2
6
7
2.542.54 10.161.8
(0.07) (0.1) (0.4) (0.1)
0.25 (0.01)
0-15°
2.542.54 10.161.8
18.9
8.7 12.8
17.2
(0.07) (0.1) (0.4)
(0.74)
(0.35)
(0.68)
(0.50)
(0.1)
1.0 (0.04)
1.5 (0.06)
top view
14
9
8
1
2
6
7
7.4 (0.29)
0.25 (0.01)
0-4°
1.2
(0.05)
DIP-Models
SMD-Models
NC = not to connect
Recommended Solder Pad
Dimension:
18.1 (0.71)
2.542.54 10.161.8
(0.07) (0.1) (0.4) (0.1)
1.8 (0.07)
2.0 (0.08)