OxiCap(R) NOM Low ESR Multianodes Niobium Oxide Capacitor * Multi-anode construction * Super low ESR * Non-burn safe technology * CV range: 220-680F / 1.8-6.3V * IBM global approval received in 2004 * Electra award received in 2005 Elektra Award 2005 LEAD-FREE COMPATIBLE COMPONENT L W CASE DIMENSIONS: millimeters (inches) H A S A W1 Code EIA Code E 2917 EIA Metric L0.20 (0.008) 7343-43 7.30 (0.287) W+0.20 (0.008) H+0.20 (0.008) -0.10 (0.004) -0.10 (0.004) 4.30 (0.169) 4.10 (0.162) W1 0.20 (0.008) A+0.30 (0.012) -0.20 (0.008) S Min. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. For part marking see page 130 HOW TO ORDER NOM E Type Case Size See table above 227 M 006 Capacitance Code 1st two digits represent significant figures, 3rd digit represents multiplier in pF Tolerance M=20% Rated DC Voltage 001 = 1.8Vdc 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc R Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel 0040 ESR in m TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage DC (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C is not stated 220 F to 680 F 20% 0.02CV 1.8 2.5 4 6.3 0.9 1.3 2 3 2.3 3.3 5.2 8 1.2 1.7 2.6 4 -55C to +125C 0.2% per 1000 hours at 85C, VR, 0.1/V series impedance, 60% confidence level Meets requirements of AEC-Q200 89 OxiCap(R) NOM Low ESR Multianodes Niobium Oxide Capacitor CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 220 227 330 337 470 477 680 687 Rated Voltage DC (VR ) to 85C / 0.66 DC to 105C / 0.5 DC to 125C 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J) E(40) E(35) E(23,35) E(30) E(23,30) E(23) E(23) LEAD-FREE COMPATIBLE COMPONENT Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. NON-BURN NON-SMOKE RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Capacitance (F) NOME687M001#0023 E 680 NOME477M002#0030 NOME687M002#0023 E E 470 680 NOME337M004#0035 NOME477M004#0023 NOME477M004#0030 E E E 330 470 470 NOME227M006#0040 NOME337M006#0023 NOME337M006#0035 E E E 220 330 330 Rated Voltage (V) DCL (A) Max. DF ESR % Max. (m) Max. @100kHz 1.8 Volt @ 85C (1.2 1.8 24.5 6 2.5 Volt @ 85C (1.7 2.5 23.5 10 2.5 34 6 4 Volt @ 85C (2.6 4 26.4 8 4 37.6 6 4 37.6 6 6.3 Volt @ 85C (4 6.3 26.4 12 6.3 39.6 6 6.3 39.6 6 Volt @ 23 Volt @ 30 23 Volt @ 35 23 30 Volt @ 40 23 35 100kHz RMS Current (A) MSL 105C 3 105C 3 3 105C 3 3 3 105C 3 3 3 25C 85C / 0.9 Volt @ 125C) 3.753 3.378 / 1.3 Volt @ 125C) 3.286 2.958 3.753 3.378 / 2 Volt @ 125C) 3.043 2.738 3.753 3.378 3.286 2.958 / 3 Volt @ 125C) 2.846 2.561 3.753 3.378 3.043 2.738 100kHz RMS Voltage (V) 125C 25C 85C 125C 1.501 0.086 0.078 0.035 1.315 1.501 0.099 0.086 0.089 0.078 0.039 0.035 1.217 1.501 1.315 0.106 0.086 0.099 0.096 0.078 0.089 0.043 0.035 0.039 1.138 1.501 1.217 0.114 0.086 0.106 0.102 0.078 0.096 0.046 0.035 0.043 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 125 times catalog limit post mounting. For typical weight and composition see page 123. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 90