89
OxiCap®NOM Low ESR Multianodes
Niobium Oxide Capacitor
• Multi-anode construction
• Super low ESR
• Non-burn safe technology
• CV range: 220-680μF / 1.8-6.3V
• IBM global approval received in 2004
• Electra award received in 2005
L
SAAW
1
W
H
HOW TO ORDER
Technical Data: All technical data relate to an ambient temperature of +25°C is not stated
Capacitance Range: 220 μF to 680 μF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.02CV
Rated Voltage DC (VR)
+85°C: 1.8 2.5 4 6.3
Category Voltage (VC)
+125°C: 0.9 1.3 2 3
Surge Voltage (VS)
+85°C: 2.3 3.3 5.2 8
Surge Voltage (VS)
+125°C: 1.2 1.7 2.6 4
Temperature Range: -55°C to +125°C
Reliability: 0.2% per 1000 hours at 85°C,
VR
, 0.1Ω/V series impedance, 60% confidence level
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
Code EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008)
W1
±0.20 A+0.30 (0.012) S Min.
Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
E2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
CASE DIMENSIONS: millimeters (inches)
Elektra Award
2005
For part marking see page 130
NOM
Type
E
Case Size
See table
above
227
Capacitance Code
1st two digits
represent significant
figures, 3rd digit
represents multiplier
in pF
M
Tolerance
M=±20%
006
Rated
DC Voltage
001 = 1.8Vdc
002 = 2.5Vdc
004 = 4Vdc
006 = 6.3Vdc
R
Packaging
R = Pure Tin 7" Reel
S = Pure Tin 13" Reel
004 0
ESR in mΩ
LEAD-FREE COMPATIBLE
COMPONENT
90
NON-BURN
NON-SMOKE
LEAD-FREE COMPATIBLE
COMPONENT
OxiCap®NOM Low ESR Multianodes
Niobium Oxide Capacitor
Capacitance
Rated Voltage DC (
VR
) to 85°C / 0.66 DC to 105ºC / 0.5 DC to 125ºC
μF Code 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J)
220 227 E(40)
330 337 E(35) E(23,35)
470 477 E(30) E(23,30)
680 687 E(23) E(23)
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Available Ratings, (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
*Codes under development - subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR 100kHz RMS Current (A) 100kHz RMS Voltage (V)
AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL
Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
1.8 Volt @ 85°C (1.2 Volt @ 105°C / 0.9 Volt @ 125ºC)
NOME687M001#0023 E 680 1.8 24.5 6 23 3 3.753 3.378 1.501 0.086 0.078 0.035
2.5 Volt @ 85°C (1.7 Volt @ 105°C / 1.3 Volt @ 125ºC)
NOME477M002#0030 E 470 2.5 23.5 10 30 3 3.286 2.958 1.315 0.099 0.089 0.039
NOME687M002#0023 E 680 2.5 34 6 23 3 3.753 3.378 1.501 0.086 0.078 0.035
4 Volt @ 85°C (2.6 Volt @ 105°C / 2 Volt @ 125ºC)
NOME337M004#0035 E 330 4 26.4 8 35 3 3.043 2.738 1.217 0.106 0.096 0.043
NOME477M004#0023 E 470 4 37.6 6 23 3 3.753 3.378 1.501 0.086 0.078 0.035
NOME477M004#0030 E 470 4 37.6 6 30 3 3.286 2.958 1.315 0.099 0.089 0.039
6.3 Volt @ 85°C (4 Volt @ 105°C / 3 Volt @ 125ºC)
NOME227M006#0040 E 220 6.3 26.4 12 40 3 2.846 2.561 1.138 0.114 0.102 0.046
NOME337M006#0023 E 330 6.3 39.6 6 23 3 3.753 3.378 1.501 0.086 0.078 0.035
NOME337M006#0035 E 330 6.3 39.6 6 35 3 3.043 2.738 1.217 0.106 0.096 0.043
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
ESR allowed to move up to 125 times catalog limit post mounting.
For typical weight and composition see page 123.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
