Scotch®
Box Sealing Tape
311
Product Description Scotch®Box Sealing Tape 311 is a general purpose box sealing tape designed
specifically for utility type applications on light to medium weight boxes. The
product offers good performance over broad temperature ranges; specifically in
colder and damper applications; and adheres to recycled fiberboard.
Typical Physical
Properties
Technical Data January, 2011
Note: The follo wing technical information and data should be consider ed representati v e
or typical only, and should not be used for specif ication pur poses.
ASTM Test Method
Adhesion to Steel: 22 oz./in. width (24 N/100 mm width) D-3330
Tensile Strength:
Machine Direction: 25 lbs./in. width (438 N/100 mm width) D-3759
Cross Direction: 40 lbs./in. width (700 N/100 mm width) D-3759
Elongation at Break: 125% D-3759
Thickness - Backing: 1.1 mil (0.028 mm) nominal D-3652
Total: 2.05 mil (0.052 mm) nominal D-3652
Construction Backing Adhesive Colors
Biaxially oriented Pressure sensitive acrylic. Requires no Clear and tan
polyprop ylene film moisture, heat or solv ent for activ ation.
3
Features • Adheres instantly to a v ariety of surfaces.
• Conformable backing.
• Edge tear and split resistant.
• Good aging in sunlight or fluorescent lighting.
• Reliable closures.
• Long life in use.
Standard Widths: 48 mm
Core Size (ID): 3 in.
Lengths: 50 m, 100 m, 914 m, 1500 m
Available Sizes
Scotch®Box Sealing Tape
311
A pplication Techniques An extensive line of application equipment including hand held manual dispensers
and semi-automatic and fully automatic equipment is available. Scotch®Box Sealing
Tape 311 has been applied to fiberboard boxes with good results at refrigeration
temperatures of 32°F to 50°F (0°C to 10°C). Once applied, Scotch®Tape 311
performs well on fiberboard boxes subjected to temperatures below 32°F (0°C).
Storage Conditions Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40 to 50% relative
humidity are recommended.
Scotch is a registered trademark of 3M.
Printed in U.S.A.
©3M 2011 70071002961 (1/11)
Recycled Paper
40% pre-consumer
10% post-consumer
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Technical Information
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Warranty,
Limited Remedy,
and Disclaimer
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Product Use
Shelf Life To obtain best performance, use this product within 18 months from date of
manufacture.
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2008 standards.
ISO 9001:2008
