- 426 -
SFR201 THRU SFR207
2.0 AMPS. Soft Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
2.0 Amperes
eatures
Low forward voltage drop
High current capability
High reliability
High surge current capability
Fast switching for high efficiency
echanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Axial leads, solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260℃
/10 seconds/.375”,(9.5mm) lead lengths
at 5 lbs.,(2.3kg) tension
Weight: 0.40 gram
DO-15
Dimensions in inches and (millimeters)
aximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol
SFR
201
SFR
202
SFR
203
SFR
204
SFR
205
SFR
206
SFR
207
Unit
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage VDC 50
100
200
400
600
800
1000
V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
@TA = 55℃ I(AV) 2.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method ) IFSM
60 A
Maximum Instantaneous Forward Voltage
@ 2.0A VF 1.2 V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=75℃ IR 5.0
100 uA
uA
Maximum Reverse Recovery Time ( Note 1 )
Trr 120 200
350 nS
Typical Junction Capacitance ( Note 2 ) Cj 20 pF
Typical Thermal Resistance ( Note 3 ) R
θ
JA 60 OC/W
Operating Temperature Range TJ -65 to +150 ℃
Storage Temperature Range TSTG -65 to +150 ℃
Notes:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.