16375-3 - Bussmann / Eaton

Modular Fuseholder Selection Table (8x32, 14x51, and 22x58)

Part Numbers

Max No. of

Series/ Catalog Numbers Voltage 17.5mm Box Maximum

Size W/O Indication W/Indication & Current IEC UL Phase Configuration Modules* Qty. Wire Range Torque

CH081D CH081DI • 1-pole 1 12 1-16mm2(18-6 AWG) 2.5 N•m (22in-lb)

CH081DNX - 400Vac • 1 Neutral Pole 1 12

CH081DNS CH081DNSI 25A • 1-pole + Neutral 1 12 1-10mm2(18-8 AWG) 2.0 N•m (17.5in-lb)

CH081DN CH081DNI • 1-pole + Neutral 2 6 1-16mm2 (18-8 AWG) 2.5 N•m (22in-lb)

CH082D CH082DI • 2-pole 2 6

CH083D CH083DI • 3-pole 3 4

CH083DNS CH083DNSI • 3-pole + Neutral 3 4

CH083DN CH083DNI • 3-pole + Neutral 4 3

CH084D CH084DI UL/CSA • 4-pole 4 3

CH141D

CH141DICH1

40A • † 1-pole 1.5 6

CH141DMS -14X51 (5 Watt) • 1-pole + Microswitch 1.5 6

CH141DNX - IEC • 1 Neutral Pole 1.5 6

CH141DN CH141DNI 690Vac, • 1-pole + Neutral 3 3

CH142D CH142DI 50A • † 2-pole 3 3

CH143D CH143DI • † 3-pole 4.5 2

CH143DMS - • 3-pole + Microswitch 4.5 2

CH143DN CH143DNI UL • 3-pole + Neutral 6 1

CH143DNMS - 600Vac/dc, • 3-pole + Neutral + Microswitch 6 1

CH144D CH144DI 100A • 4-pole 6 1

CH221B NotCH22 (9.5 Watt) • † 1-pole 2 6

CH221BMS Available22X58IEC • 1-pole + Microswitch 2 6

CH221BNX with 690Vac, • 1 Neutral Pole 2 6

CH221BN local 125A • 1-pole + Neutral 4 3

CH222B neon • † 2-pole 4 3

CH223B indicatio • † 3-pole 6 2

CH223BMS (remote • 3-pole + Microswitch 6 2

CH223BN microswitch • † 3-pole + Neutral 8 1

CH223BNMS only) • 3-pole + Neutral + Microswitch 8 1

CH224B • 4-pole 8 1

CH08

8X32

CH14

14X51

CH22

22X58

IEC

400Vac

25A

UL/cURus

600Vac/dc,

40A

(5 Watt)

IEC

690Vac,

50A

UL/cURus

600Vac/dc,

100A

(9.5 Watt)

IEC

690Vac,

125A

Not

Available

with

local

neon

indication

(remote

microswitch

only)

1-16mm2(18-6 AWG) 2.5 N•m (22in-lb)

2.5-16mm2(14-6 AWG) 3.0 N•m (26in-lb)

2.5-50mm2(14-1 AWG) 4.0 N•m (35in-lb)

† UL Recognized (cURus)

†† UL LIsted (cULus)

*Holder width as compared to standard, i.e., 1 = 17.5mm module 2 = 35mm.

**90V miminum required for illumination

0210 BU-SB10208 Page 2 of 6 Data Sheet 2053

Manual Multi-phase Construction (8x32, 10x38, 14x51mm)

Additional poles can be added by using the accessories shown on page 2 of this data sheet.The following components

are required for each additional pole, up to a maximum of 4-poles.

Part Number Description

JV-L Multi-pole Connector Kit (10x38)

CH810-HP 8x32 Handle Pin

CH14-HP 14x51mm Handle Pin

AL-D Multi-pole Connector Kit (8x32)

Contact Cooper Bussmann Application

Engineering for more information.

Recommended Cooper Bussmann™ Fuses:

8x32 IEC Cylindrical - C08 Series

10x38 North American Class CC Fuses - LP-CC, FNQ-R, KTK-R

Fuses - FNQ, KTK, AGU, KLM, BAF, FNM, FWA, FWC, C10 Series, PV Series

14x51 Fuses - FWX, FWH, FWP & NON, C14 Series

22x58 Fuses - FWP, C22 Series

Multi-Phase Connection Links CH08 and CH14 Series AL-D – 12

Multi-Phase Connection Kit* CHM and CHCC Series JV-L – –

Multi-Phase Handle Pins CH08 Series CH810-HP – 12

CH14 Series CH14-HP –

CH08 Series C08NL –

Neutral Links CH14 Series C14NL – 10

CH22 Series C22NL –

Operated-Fuse Micro-Switches CH141 Series CH14MS-1D 1 5

CH143 Series CH14MS-3D 3 2

PLC Module (see page 6 for details) CHM and CHCC Series CH-PLC†11

IP20 Kit CH22 Series CH22IP20 – 12

Lock Support CH22 Series CH22LS – 5

Accessories for use with the new CH Series of Modular Fuseholders

(For diagram of multi-phase construction, see page 2)

Operated-Fuse

Microswitches

Accessory For Use with Fuse Holders Part Number No. of Box Quantity

Poles

0210 BU-SB10208 Page 3 of 6 Data Sheet 2053

*Kit contains 3-Spring pins and 6-connection links

†UL Listed (cULus)

Multi-Phase

Connection Links

Programmable Logic

Controller

(PLC)

Multi-Phase

Handle Pins

Neutral Links

Lock Support IP20 Kit

Dimensions - mm (in)

14x51mm

0210 BU-SB10208 Page 4 of 6 Data Sheet 2053

8x32mm

10x38mm

70.00

2.756

17.50

0.689

35.00

1.378

52.50

2.067

71.88

2.830

42.83

1.686

52.83

2.080

60.83

2.395

10.00

0.394

45.00

1.772

82.75

3.258

Dimensions - mm (in)

22x58mm

0210 BU-SB10208 Page 5 of 6 Data Sheet 2053

High High

Speed

Maximum

Speed

Maximum

Fuse

Continuous

Fuse

Continuous

Amps Amps

FWA-5A10F 5 FWC-6A10F 6

FWA-10A10F 10 FWC-8A10F 8

FWA-15A10F 14 FWC-10A10F 10

FWA-20A10F 18 FWC-12A10F 12

FWA-25A10F 20 FWC-16A10F 15

FWA-30A10F 24 FWC-20A10F 16

- - FWC-25A10F 19

- - FWC-32A10F 21

CHM Series (10x38)

High

Speed

Maximum

Fuse

Continuous

Amps

FWP-20A22F 20

FWP-25A22F 25

FWP-32A22F 32

FWP-40A22F 40

FWP-50A22F 50

FWP-63A22F 58

FWP-80A22F 66

FWP-100A22F 78

CH22 Series (22x58)

FWX-5A14F 5 FWH-5A14F 5 FWP-5A14F 5 FWP-32A14F 27

FWX-10A14F 10 FWH-10A14F 10 FWP-10A14F 10 FWP-40A14F 32

FWX-15A14F 15 FWH-15A14F 14 FWP-15A14F 14 FWP-50A14F 38

FWX-20A14F 20 FWH-20A14F 18 FWP-20A14F 18 - -

FWX-25A14F 24 FWH-25A14F 21 FWP-25A14F 21 - -

FWX-30A14F 27 FWH-30A14F 22 FWP-30A14F 22 - -

Please contact Cooper Bussmann Application Engineering for more information regarding high speed fuse application.

High High High High

Speed

Maximum

Speed

Maximum

Speed

Maximum

Speed

Maximum

Fuse

Continuous

Fuse

Continuous

Fuse

Continuous

Fuse

Continuous

Amps Amps Amps Amps

CH14 Series (14x51)

Using High Speed Fuses (Semiconductor Protection)

The CH Series of modular fuse holders may be used in conjunction with Class gR and aR high speed fuses.

The continuous load current should not exceed that shown in the tables below for specific high speed fuse

types/amp ratings so that the watts loss of the fuse does not exceed the watts loss capability of the holder.

High speed fuses may also need to be derated based on specific application and ambient temperature.

0210 BU-SB10208 Page 6 of 6 Data Sheet 2053

Remote Fuse Monitoring Accessory – CH-PLC

UL Class CC, Midget and IEC 10x38 fuses

Description

A resetable three-phase remote fuse monitor that

integrates with a Programmable Logic Controller (PLC) or

other monitoring and control equipment.

Specifications:

•Power Input: 24Vdc / 5mA

•Sensing Voltage: 600V/30mA

•Output Signals: Digital 0Vdc (Low), 24Vdc (High)

- 0Vdc Low – Fuse is good

- 24Vdc High – Fuse has opened

When the fuse opens, the output signal is sent high and will

remain high until the unit is reset

•Rated Impulse Voltage: 8kV

•Local Indication: Two distinct LEDs indicate unit power

(green) and open fuse (red). Upon the replacement of the

fuse, the actuation of the reset switch will reset the open

fuse LED

•Flammability Rating: UL 94V0

Wiring:

• For power, signal and ground connections use 22-24AWG

(0.25mm2) 300V rated wire

Emissions and Immunity Testing:

• Electrostatic Discharge IEC 61000-4-2

• Electrical Fast Transient/Burst IEC 6100-4-4

• Surge Immunity IEC61000-4-5

Packaging:

• The CH-PLC is packaged individually

• A single unit monitors up to three phases

• Package includes 0.11” (2.8mm) quick connects for power,

signal and ground connections

Minimum Circuit Voltage:

• Minimum circuit voltage required across the CH holder is

100Vac for the remote indication device to operate

Installation Technique:

• Mounts on the left side of the fuse holder and mechanically

interlocks with the fuse holder switch handle with hardware

provided

IP20 Rating: Yes

Environmental Data:

• Storage and Operating Temperature: -20°C to 75°C

Agency Information:

• UL 508

• cULus to CSA Standard 22.2 No.14

PLC Programming:

• The CH-PLC signal line is designed to provide a digital

input to a PLC I/O card.

• Programmable Logic Control program must be written to

properly interpret the input signal to the PLC.

• The PLC program should check for consecutive high signals

before taking action on a critical process.

De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures.

St. Louis, MO 63178

www.cooperbussmann.com

The only controlled copy of this Da ta Sheet is the electronic read-only ver sion located on the Cooper Bussmann Network Drive. All other copies of

this document are by definition uncontrolled. This bulletin is intended to clear ly present comprehensive product da ta and provide technical informa-

tion that will help the end user with design applica tions. Cooper Bussmann reserves the right, without notice, to change design or construction of

any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,

any technical informa tion contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Eaton:

CHM3 16375-1 16375-3 CH221DNX CH081D CH082D FWP-2A14F CH223DNMS CH143DMS CH223DMS

CH082DI CH081DNI CH083DNS CH810-HP CH083DI CHCC3 CH14-HP CH221D FWP-5A14F CH221DMS AL-

D CH14MS-1D CH222D CH224D CH081DNS CH221DN FWP-15A14F CH081DI CHCC1DI CH084DI

CH083DNSI CH14MS-3D CH084D CH081DN CH081DNSI CH223DN CH083D CH142B JV-L CH141B CH142BI

CH143B CH143BI CH143BN CH143BMS