For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
1
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
General Description
Features
Functional Diagram
The HMC129LC4 is a general purpose double-
balanced MMIC mixer housed in a leadless “PB
Free” RoHS-Compliant SMT package which can
be used as an upconverter or downconverter in the
4 to 8 GHz band. The HMC129LC4 is ideally suited
for applications where small size, no DC bias, and
consistent IC performance are required. This mixer
can operate over a wide LO drive input of +9 to +15
dBm. It performs equally well as a Bi-Phase modulator
or demodulator. The HMC129LC4 eliminates the
need for wire bonding, allowing use of surface mount
manufacturing techniques.
Conversion Loss: 7 dB
LO to RF and IF Isolation: 40 dB
Input IP3: +17 dBm
RoHS Compliant 4x4 mm SMT Package
Typical Applications
The HMC129LC4 is ideal for:
Microwave & VSAT Radios
Test Equipment
• Military EW, ECM, C3I
Electrical Specications, TA = +25° C, LO Drive = +15 dBm*
Parameter Min. Typ. Max. Units
Frequency Range, RF & LO 4.0 - 8.0 GHz
Frequency Range, IF DC - 3.0 GHz
Conversion Loss 7 9 dB
Noise Figure (SSB) 7 9 dB
LO to RF Isolation 30 40 dB
LO to IF Isolation 32 40 dB
IP3 (Input) 17 dBm
IP2 (Input) 50 dBm
1 dB Gain Compression (Input) 10 dBm
* Unless otherwise noted, all measurements performed as downconverter, IF = 100 MHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
2
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Isolation @ LO = +15 dBm
Conversion Gain vs. LO Drive
-20
-15
-10
-5
0
3456789
+25C
+85C
-40C
CONVERSION GAIN (dB)
FREQUENCY (GHz)
Conversion Gain vs. Temperature
LO = +15 dBm
Upconverter Performance
Conversion Gain vs. LO Drive
Return Loss @ LO = +15 dBm
IF Bandwidth @ LO = +15 dBm
-25
-20
-15
-10
-5
0
3456789
LO Return Loss
RF Return Loss
RETURN LOSS (dB)
FREQUENCY (GHz)
-15
-10
-5
0
0 0.5 1 1.5 2 2.5 3 3.5 4
Return Loss
Conversion Gain
RESPONSE (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
3456789
+ 11 dBm
+ 13 dBm
+ 15 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
3456789
LO = + 11 dBm
LO = + 13 dBm
LO = + 15 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
3456789
RF/IF
LO/RF
LO/IF
ISOLATION (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
3
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Input IP2 vs.
Temperature @ LO = +15 dBm
Input IP2 vs. LO Drive
Input IP3 vs. LO Drive
Input P1dB vs.
Temperature @ LO = +15 dBm
Input IP3 vs.
Temperature @ LO = +15 dBm
Harmonics of LO
nLO Spur @ RF Port
LO Freq. (GHz) 1234
355 47 57 68
442 50 42 69
542 54 54 56
639 54 40 66
735 55 35 63
835 63 45 82
929 45 37 81
10 15 42 35 88
LO = +15 dBm
All values in dBc below input LO level measured at RF port
40
45
50
55
60
65
70
3456789
+25C
+85C
-40C
INPUT IP2 (dBm)
FREQUENCY (GHz)
40
45
50
55
60
65
70
3456789
LO = + 11 dBm
LO = + 13 dBm
LO = + 15 dBm
INPUT IP2 (dBm)
FREQUENCY (GHz)
8
10
12
14
16
18
3456789
+25C
+85C
-40C
INPUT P1dB (dBm)
FREQUENCY (GHz)
10
15
20
25
30
3456789
+25C
+85C
-40C
INPUT IP3 (dBm)
FREQUENCY (GHz)
10
15
20
25
30
3456789
LO = + 11 dBm
LO = + 13 dBm
LO = + 15 dBm
INPUT IP3 (dBm)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
4
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Absolute Maximum Ratings
RF/IF Input +15 dBm
LO Drive +27 dBm
IF DC Current 4 mA
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 4.957 mW/ °C above 85 °C) 124 mW
Thermal Resistance
(channel to ground paddle) 131.4 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
MxN Spurious @ IF Port
nLO
mRF 01234
0xx 10 25 13 41
19033 44 46
278 76 70 78 86
388 91 87 64 81
497 102 104 109 110
RF Freq. = 6.1 GHz @ -10 dBm
LO Freq. = 6.0 GHz @ +15 dBm
Measured as downconverter
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
5
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC129LC4 Alumina, White Gold over Nickel MSL3 [1] H129
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
6
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Pin Number Function Description Interface Schematic
1, 5 - 7, 11 - 14,
18 - 24 N/C No Connection. These pins may be connected to RF/DC ground.
Performance will not be affected.
2, 4, 8, 10,
15, 17 GND These pins and package bottom
must be connect to RF/DC ground.
3RF This pin is DC coupled
and matched to 50 Ohms.
9IF
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not source/
sink more than 2 mA of current or die non-function and possible
die failure will result.
16 LO This pin is DC coupled
and matched to 50 Ohms.
Pin Descriptions
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
7
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
List of Materials for Evaluation PCB 109728 [1]
Item Description
J1 - J3 PCB Mount SMA Connector
U1 HMC129LC4
PCB [2] 109726 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
8
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
HMC129LC4 109728-HMC129LC4 HMC129LC4TR