CSC Vishay Dale Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics FEATURES * Body height: "A" profile = 0.195" [4.95 mm]; "B" profile = 0.295" [7.50 mm] "A" profile standard in 4 thru 12 pins Thick film resistive elements Reduces total assembly costs Resistor elements protected by tough epoxy conformal coating * Wide resistance range (10 to 2.2 M) * Available in bulk pack (preferred) or tube pack * Lead (Pb)-free version is RoHS Compliant (RoHS Directive 2002/95/EC) * * * * STANDARD ELECTRICAL SPECIFICATIONS RESISTOR GLOBAL RESISTANCE TEMP. COEFFICIENT STANDARD TCR TRACKING1) OPERATING PACKAGE POWER RATING MODEL/ RANGE (- 55 C to + 125 C) TOLERANCE (- 55 C to + 125 C) VOLTAGE HEIGHT max. at 70 C1) SCHEMATIC ppm/C ppm/C VDC max. % A 0.20 W 10 - 50 250 50 100 CSCxxx01 2 (1 %)2) 50.1 - 2.2M 100 B 0.25 W A 0.30 W 10 - 50 250 CSCxxx03 2 (1 %)2) 50 100 50.1 - 2.2M 100 B 0.40 W A 0.20 W 10 - 50 250 CSCxxx05 2 (1 %)2) 150 100 50.1 - 2.2M 100 B 0.25 W Notes 1. For resistor power ratings at + 25 C see derating curves. 2. Contact factory for 1 %. * See derating curves for Package Power Rating. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGDA (preferred part number format) C S C 0 8 A 0 3 1 0 0 R G D A GLOBAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING SPECIAL CSC 04 = 4 Pin 08 = 8 Pin 12 = 12 Pin A = "A" Profile B = "B" Profile 01 = Bussed 03 = Isolated 00 = Special R = Decimal K = Thousand M = Million 10R0 = 10 680K = 680 k 1M00 = 1.0 M F=1% G=2% J=5% S = Special EK = Lead (Pb)-free, Bulk EJ = Lead (Pb)-free, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1 - 999 as applicable PA = Tin/Lead, Bulk DA = Tin/Lead, Tube Historical Part Number example: CSC08A03101G (will continue to be accepted) CSC HISTORICAL MODEL 08 A PIN COUNT PACKAGE HEIGHT 03 101 G D03 SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: CSC08A05131AGPA (preferred part number format) C S C 0 8 A 0 5 1 3 1 A G P A GLOBAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING SPECIAL CSC 04 = 4 Pin 08 = 8 Pin 12 = 12 Pin A = "A" Profile B = "B" Profile 05 = Dual Terminator 3 digit impedance code, followed by alpha modifier (see impedance codes table) F=1% G=2% J=5% EK = Lead (Pb)-free, Bulk EJ = Lead (Pb)-free, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1 - 999 as applicable PA = Tin/Lead, Bulk DA = Tin/Lead, Tube Historical Part Number example: CSC08A05221331G (will continue to be accepted) CSC 08 A 05 221 331 G P03 HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply. Lead (Pb)-free version meets EIA/ECA-CB23 Rev. G whisker test requirements for Class 1A products. www.vishay.com 1 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision: 30-Jul-07 CSC Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC SERIES Voltage Coefficient of Resistance Veff < 50 ppm typical Dielectric Strength VAC 200 Isolation Resistance (03 Schematic) > 100M Operating Temperature Range C - 55 to + 125 DIMENSIONS in inches [millimeters] A Max. 0.098 [2.49] Max. C Max. Pin #1 0.130 0.010 [3.30 0.254] 0.032 [0.813] 0.050 [1.27] Max. 0.018 0.003 [0.457 0.076] 0.100 0.010 [2.54 0.254] Non-Accumulative 01 SCHEMATIC 1 3 n-1 n 03 SCHEMATIC 1 2 4 n-1 n 05 SCHEMATIC R1 2 A (Maximum) B CSC04 3 0.390 [9.90] 0.300 [7.62] CSC05 4 0.490 [12.45] 0.400 [10.16] CSC06 5 0.590 [14.99] 0.500 [12.70] CSC07 6 0.690 [17.53] 0.600 [15.24] CSC08 7 0.790 [20.07] 0.700 [17.78] CSC09 8 0.890 [22.61] 0.800 [20.32] CSC10 9 0.990 [25.15] 0.900 [22.86] CSC11 10 1.09 [27.69] 1.00 [25.40] CSC12 11 1.19 [30.23] 1.100 [27.94] NUMBER OF RESISTORS A (Maximum) B CSC04 2 0.390 [9.90] 0.300 [7.62] CSC06 3 0.590 [14.99] 0.500 [12.70] CSC08 4 0.790 [20.07] 0.700 [17.78] CSC10 5 0.990 [25.15] 0.900 [22.86] CSC12 6 1.19 [30.23] 1.100 [27.94] NUMBER OF RESISTORS A (Maximum) B GLOBAL MODEL R2 1 NUMBER OF RESISTORS GLOBAL MODEL 3 3 Document Number: 31509 Revision: 30-Jul-07 n-1 n 0.012 0.003 [0.305 0.076] (Leads are along centerline of body) B GLOBAL MODEL 2 0.045 [1.14] CSC04 4 0.390 [9.90] 0.300 [7.62] CSC05 6 0.490 [12.45] 0.400 [10.16] CSC06 8 0.590 [14.99] 0.500 [12.70] CSC07 10 0.690 [17.53] 0.600 [15.24] CSC08 12 0.790 [20.07] 0.700 [17.78] CSC09 14 0.890 [22.61] 0.800 [20.32] CSC10 16 0.990 [25.15] 0.900 [22.86] CSC11 18 1.09 [27.69] 1.00 [25.40] CSC12 20 1.19 [30.23] 1.100 [27.94] For technical questions, contact: ff2aresistors@vishay.com C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.295 [7.50] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.295 [7.50] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.295 [7.50] www.vishay.com 2 CSC Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics Vishay Dale MECHANICAL SPECIFICATIONS STOCKED RESISTANCE VALUES IN OHMS ("G" TOLERANCE) Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215 Standard E-24 resistance values stocked. Consult factory. Solderability: Per MIL-STD-202, Method 208E, RMA flux Many dual terminator resistance values stocked. Consult factory. Body: High alumina, epoxy coated Terminals: Solder plated leads IMPEDANCE CODES R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C CODE 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Power Rating (W) "A" Profile 1.90 1.50 1.15 "A" PROFILE + 70 C PACKAGE RATINGS CSC12A 1.5 W CSC11A 1.37 W CSC10A Package CSC10A 1.25 W CSC08A Package CSC09A 1.12 W CSC06A Package CSC08A 1.00 W CSC07A 0.87 W CSC06A 0.75 W CSC05A 0.62 W CSC04A 0.40 W Single Resistor 03 Schematic 0.45 0.30 10 and 05 Schematics - 50 + 25 + 70 + 125 + 150 Ambient Temperature C Derating "B" Profile CSC12B 1.90 W CSC11B 1.75 W CSC10B 1.60 W CSC09B 1.45 W CSC08B 1.30 W Single Resistor CSC07B 1.15 W 03 Schematic CSC06B 1.00 W 01 and 05 Schematics CSC05B 0.80 W CSC04B 0.60 W CSC10B Package 2.50 Power Rating (W) "B" PROFILE + 70 C PACKAGE RATINGS CSC08B Package 2.00 CSC06B Package 1.50 0.60 0.38 - 50 Derating www.vishay.com 3 + 25 + 70 + 125 + 150 Ambient Temperature C For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision: 30-Jul-07 CSC Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics Vishay Dale CIRCUIT APPLICATIONS 01 Schematic Bussed The CSCxxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: * "Wired OR" Pull-up * Power Gate Pull-up * MOS/ROM Pull-up/Pull-down 1 2 3 n-1 n * Open Collector Pull-up * TTL Input Pull-down * TTL Unused Gate Pull-up * "A" profile standard, "B" Profile available. 03 Schematic Isolated The CSCxxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: 1 2 3 4 n-1 * "Wired OR" Pull-up * Power Driven Pull-up * Power Gate Pull-up * Line Termination n * Long-Line Impedance Balancing * LED Current Limiting * ECL Output Pull-down * TTL Input Pull-down * "A" Profile standard, "B" Profile available. 05 Schematic Dual Terminator R2 The CSCxxx05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. R1 * "A" profile standard, "B" Profile available. 1 2 3 n-1 n PERFORMANCE CONDITIONS MAX. R (Typical Test Lots) Thermal Shock 5 cycles between - 65 C and + 125 C 0.50 % R Short Time Overload 2.5 x rated working voltage, 5 seconds 0.25 % R 45 minutes at full rated working voltage at - 65 C 0.25 % R 240 hours with humidity ranging from 80 % RH to 98 % RH 1.00 % R Leads immersed in + 350 C solder to within 1/16" of body for 3 seconds 0.25 % R Total of 18 shocks at 100 g's 0.25 % R Vibration 12 hours at maximum of 20 g's between 10 and 2000 Hz 0.25 % R Load Life 1000 hours at + 70 C, rated power applied 1.5 hours "ON", 0.5 hours "OFF" for full 1000 hours period. Derated according to the curve. 1.00 % R 4.5 pound pull for 30 seconds 0.25 % R 10 000 M (minimum) - No evidence of arcing or damage (200 Vrms for 1 minute) - TEST Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Terminal Strength Insulation Resistance Dielectric Withstanding Voltage Document Number: 31509 Revision: 30-Jul-07 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 4 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1