Product data sheet Characteristics ZB4BG412 selector switch head O22 2-position stay put Ronis 421E Range of product Harmony XB4 Product or component type Head for selector switch Device short name ZB4 Bezel material Chromium plated metal Mounting diameter 22 mm Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator Stay put Operator profile Black key switch Operator position information 2 positions 90 Type of keylock Ronis 421E Key withdrawal position In any position The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Main Complementary CAD overall width 29 mm CAD overall height 29 mm CAD overall depth 62 mm Product weight 0.098 kg Resistance to high pressure washer 7000000 Pa at 55 C,distance: 0.1 m Mechanical durability 1000000 cycles Environment Protective treatment TH Ambient air temperature for storage -40...70 C Ambient air temperature for operation -25...70 C Class of protection against electric shock Class I conforming to IEC 60536 IP degree of protection IP69 K conforming to IEC 60529 NEMA degree of protection NEMA 13 NEMA 4X IK degree of protection IK06 conforming to IEC 50102 Standards CSA C22-2 No 14 EN/IEC 60947-1 EN/IEC 60947-5-1 EN/IEC 60947-5-4 EN/IEC 60947-5-5 JIS C 4520 UL 508 Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) RINA UL listed Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn for 18 ms half sine wave acceleration conforming to IEC 60068-2-27 50 gn for 11 ms half sine wave acceleration conforming to IEC 60068-2-27 RoHS EUR status Compliant RoHS EUR conformity date 0636 26/12/2011 1 Product data sheet Dimensions Drawings ZB4BG412 Dimensions of Heads for Selector Switches Standard Handle Operator ZB4 BD* Long Handle Operator ZB4 BJ* Padlockable Long Handle Operator (6.35 mm (0.25 in.) Shank Max.) ZB4 BJ*9* Black Knurled Knob ZB4 BD*9 Key Switches ZB4 BG*, ZB4 BG0*, ZB4 BG0*M 2 Product data sheet Mounting and Clearance ZB4BG412 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) (4) (5) (6) Connection by Faston Connectors Diameter on finished panel or support 40 mm min. / 1.57 in. min. 30 mm min. / 1.18 in. min. +0.4 +0.016 O 22.5 mm / 0.89 in. recommended (O 22.3 mm 0 / 0.88 in. 0 ) 45 mm min. / 1.78 in. min. 32 mm min. / 1.26 in. min. Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30 mm min. / 1.18 in. min. 40 mm min. / 1.57 in. min. 3 Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30 mm min. 40 mm min. Dimensions in in. A: B: 1.18 in. min. 1.57 in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max. Installation Precautions Minimum thickness of circuit board: 1.6 mm / 0.06 in. Cut-out diameter: 22.4 mm 0.1 / 0.88 in. 0.004 Orientation of body/fixing collar ZB4 BZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max. Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws: every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y). with each selector switch head (ZB4 BD*, ZB4 BJ*, ZB4 BG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. 4 (1) (2) Panel Printed circuit board Mounting of Adapter (Socket) ZBZ 01* 1 2 elongated holes for ZBZ 006 screw access 2 1 hole O 2.4 mm 0.05 / 0.09 in. 0.002 for centring adapter ZBZ 01* 3 8 x O 1.2 mm / 0.05 in. holes 4 1 hole O 2.9 mm 0.05 / 0.11 in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01* Dimensions An + 18.1 relate to the O 2.4 mm 0.05 / 0.09 in. 0.002 holes for centring adapter ZBZ 01*. 5