1N5221
THRU
1N5267
500 mW
Zener Diode
2.4 to 75 Volts
DO-35
Features
Wide Voltage Range Available
Glass Package
High Temp Soldering: 260°C for 10 Seconds At Terminals
Maximum Ratings
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
500 mWatt DC Power Dissipation
Power Derating: 4.0mW/°C above 50°C
Forward Voltage @ 200mA: 1.1 Volts
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A --- .166 --- 4.2
B --- .079 --- 2.00
C --- .020 --- .52
D 1.000 --- 25.40 ---
Figure 2 - Derating Curve
Power Dissipation (mW) - Versus - Temperature °C
Temperature °C
0 50 100 150
mW
200
400
A
B
C
D
D
Cathode
M
a
rk
Typical Capacitance (pf) – versus Zener voltage (VZ)
Figure 1 - Typical Capacitance
0100 200
1
10
1
00
pf
VZ
At zero volts
At –2 Volts VR
omponents
20736 Marilla Street Chatsworth

 !"#
$%  !"#
MCC
Revision: A 2011/01/01
TM
Micro Commercial Components
Marking : Cathode band and type number
www.mccsemi.com
1 of 5
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Moisture Sensitivity: Level 1
Note: 1. Lead in Glass Exemption Applied, see EU Directive Annex 5.
ELECTRICAL CHARACTERISTICS @25°C
MCC
PART
NUMBER
NOMINAL ZENER
VOLTAGE VZ @ IZT
TEST
CURRENT IZT
MAXIMUM ZENER IMPEDANCE
‘B’ SUFFIX ONLY
ZZT @ IZT ZZK @IZK = 0.25mA
MAXIMUM REVERSE
LEAKAGE CURRENT
IR @ VR
MAX. ZENER VOLTAGE
TEMP COEFFICIENT ‘B’
SUFFIX ONLY
VOLTS mA OHMS OHMS µA VOLTS % / °C
1N5221 2.4 20 30 1200 100 1.0 -0.085
1N5222 2.5 20 30 1250 100 1.0 -0.085
1N5223 2.7 20 30 1300 75 1.0 -0.080
1N5224 2.8 20 30 1400 75 1.0 -0.080
1N5225 3.0 20 29 1600 50 1.0 -0.075
1N5226 3.3 20 28 1600 25 1.0 -0.070
1N5227 3.6 20 24 1700 15 1.0 -0.065
1N5228 3.9 20 23 1900 10 1.0 -0.060
1N5229 4.3 20 22 2000 5.0 1.0 ±0.055
1N5230 4.7 20 19 1900 5.0 2.0 ±0.030
1N5231 5.1 20 17 1600 5.0 2.0 ±0.030
1N5232 5.6 20 11 1600 5.0 3.0 +0.038
1N5233 6.0 20 7.0 1600 5.0 3.5 +0.038
1N5234 6.2 20 7.0 1000 5.0 4.0 +0.045
1N5235 6.8 20 5.0 750 3.0 5.0 +0.050
1N5236 7.5 20 6.0 500 3.0 6.0 +0.058
1N5237 8.2 20 8.0 500 3.0 6.5 +0.062
1N5238 8.7 20 8.0 600 3.0 6.5 +0.065
1N5239 9.1 20 10 600 3.0 7.0 +0.068
1N5240 10 20 17 600 3.0 8.0 +0.075
1N5241 11 20 22 600 2.0 8.4 +0.076
1N5242 12 20 30 600 1.0 9.1 +0.077
1N5243 13 9.5 13 600 0.5 9.9 +0.079
1N5244 14 9.0 15 600 0.1 10 +0.082
1N5245 15 8.5 16 600 0.1 11 +0.082
1N5246 16 7.8 17 600 0.1 12 +0.083
1N5247 17 7.4 19 600 0.1 13 +0.084
1N5248 18 7.0 21 600 0.1 14 +0.085
1N5249 19 6.6 23 600 0.1 14 +0.086
1N5250 20 6.2 25 600 0.1 15 +0.086
1N5251 22 5.6 29 600 0.1 17 +0.087
1N5252 24 5.2 33 600 0.1 18 +0.088
1N5253 25 5.0 35 600 0.1 19 +0.089
1N5254 27 4.6 41 600 0.1 21 +0.090
1N5255 28 4.5 44 600 0.1 21 +0.091
1N5256 30 4.2 49 600 0.1 23 +0.091
1N5257 33 3.8 58 700 0.1 25 +0.092
1N5258 36 3.4 70 700 0.1 27 +0.093
1N5259 39 3.2 80 800 0.1 30 +0.094
1N5260 43 3.0 93 900 0.1 33 +0.095
1N5261 47 2.7 105 1000 0.1 36 +0.095
1N5262 51 2.5 125 1100 0.1 39 +0.096
1N5263 56 2.2 150 1300 0.1 43 +0.096
1N5264 60 2.1 170 1400 0.1 46 +0.097
1N5265 62 2.0 185 1400 0.1 47 +0.097
1N5266 68 1.8 230 1600 0.1 52 +0.097
1N5267 75 1.7 270 1700 0.1 56 +0.098
NOTE 1: Table as shown lists type numbers, which indicate a tolerance of ±20% with guaranteed limits on only Vz, IR, and VF. Devices with
guaranteed limits on all six parameters are indicated by suffix “A” for ±10%, “B” for ±5%, “C” for ±2% tolerance
NOTE 2: The electrical characteristics are measured after allowing the device to stabilize for 20 seconds.
NOTE 3: Temperature coefficient (áVZ). Test conditions for temperature coefficient are as follows:
a. IZT = 7.5mA, TI= 25oC T2 = 125oC (1N5221 thru 1N5242)
b. IZT = Rated IZT, TI = 25oC, T2 = 125oC (1N5243 thru 1N5267)
Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature.
1N5221 thru 1N5267
Revision: A 2011/01/01
TM
Micro Commercial Components
www.mccsemi.com
2 of 5
MCC
1
IZ, ZENER CURRENT - mA
VZ, ZENER VOLTAGE - V
Figure 1
Zener Voltage versus Zener Current – Vz =1 thru 16 Volts
14 6 7 85 9 10
0.01
1
10
mA
VOLTS
20
0.1
11 12
2 3 13 14 15 16
TA=25кIZ , ZEBER CURRENT - mA
VZ, ZENER VOLTAGE - V
Figure 2
Zener Voltage versus Zener Current – Vz =15 thru 30 Volts
15 18 20 21 2219 23 24
0.01
1
10
mA
VOLTS
20
0.1
25 26
16 17 27 28 29 30
TA=25к
MCC
Revision: A 2011/01/01
1N1N5221 thru 1N5267 TM
Micro Commercial Components
www.mccsemi.com
3 of 5
30
IZ, ZENER CURRENT - mA
VZ, ZENER VOLTAGE - V
Figure 3
Zener Voltage versus Zener Current – Vz =30 thru 75 Volts
45 55 60 6550 70 75
0.01
1
10
mA
VOLTS
20
0.1
80 85
35 40 90 95 100 105
TA=25кį=1
0.05
Figure4
Thermal resistance from
j
unction to ambient as a function of
p
ulse duration
10
Rth j-a(K/W)
tp(ms)
10
5
10
3
10
2
10
1
10
2
10-
1
1
10
10
3
0.33
0.10
0.50
0.75
0.20
0.02
0.01
Љ0.001
MCC
Revision: A 2011/01/01
1N5221 thru 1N5267 Micro Commercial Components
www.mccsemi.com
4 of 5
TM
MCC
Revision: A 2011/01/01
TM
Micro Commercial Components
www.mccsemi.com
5 of 5
3
Device Packing
Part Number-TP Tape&Reel: 10Kpcs/Reel
Part Number-AP Ammo Packing: 5Kpcs/Ammo Box
Part Number-BP Bulk: 100Kpcs/Carton
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.