XLG-200 200W Constant Power Mode LED Driver 110 M M SELV IP67 Except for L type Features Wide input range 100~305V AC( Class I) Full power output at 70~100% Constant power mode operation Metal case with IP67, suitable for outdoor application Surge protection with 6K V/4K V (10K V/6K V optional) 3 in 1 dimming function (Dim to off and Isolation design) India EESL version, can survive input voltage stress of 440Vac for 48 hours Protection functions: OVP/SCP/OCP/OTP Life time >50,000 hrs. and 5 years warranty Type HL series 05 Note.12 Applications Skyscraper lighting Street lighting Floodlight Lighting Stage lighting Fishing lighting Horticulture lighting Type HL for use in class I, Division 2 Description XLG -200 series is a 200W LED AC / DC driver featuring the constant power mode. XLG -200 operates from 100~305 VAC and offers models with different rated current ranging between 700mA and 16A. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for 40~+90 case temperature under free air convection. The design of metal housing and IP 67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LED s for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG-200 is designed with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming lines are also completely in accordance with the new regulations with isolation to ensure the users and luminaire system safety durng installation Model Encoding XLG - 200 I - L Function options Rated output voltage(12/24V ,or L/H types) I: for India version :For standard version Rated wattage Series name Type Blank A AB Function Io and Vo fixed.(For harsh environment) Io adjustable via built-in potentiometer Io adjustable via built-in potentiometer + 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Note By request In Stock In Stock Note: 12V and 24V models only with Blank and A type File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver series SPECIFICATION XLG-200-12- MODEL 12V DC VOLTAGE OUTPUT 4.15 ~ 8.3A 2.0% LINE REGULATION 0.5% 0.5% 2% 1% 500ms, 100ms/230VAC, 1200ms, 100ms/115VAC HOLD UP TIME (Typ.) 10ms/ 230VAC 10ms/ 115VAC Note.5 POWER FACTOR TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.) 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load THD< 10%(@load50%/115VC,230VAC; @load75%/277VAC) 94% 92% 2.2A / 115VAC 1.1A / 230VAC 0.9A/277VAC COLD START 65A(twidth=550s measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. No. of PSUs on 16A CIRCUIT BREAKER 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD POWER CONSUMPTION No load power consumption <0.5W OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE INPUT OVER VOLTAGE Note.7 OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 13.5 ~ 18V 27 ~ 34V Shut down output voltage, re-power on to recover 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage) can survive input voltage stress of 440Vac for 48 hours Shut down output voltage, recovers automatically after fault condition is removed Tcase=-40 ~ +90 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +90, 10 ~ 95% RH 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750(type"HL"), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; EAC TP TC 004;IP67 approved EMC SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF NOTE 16.8~ 24V 8.3A 199.2W 240mVp-p LOAD REGULATION SETUP, RISE TIME Note.6 FREQUENCY RANGE OTHERS 24V CONSTANT CURRENT REGION Note.2 8.4~ 12V RATED CURRENT 16A 192W RATED POWER RIPPLE & NOISE (max.) Note.3 150mVp-p Adjustable for A-Type only (via the built-in potentiometer) CURRENT ADJ. RANGE 8 ~ 16A VOLTAGE TOLERANCE Note.4 3.0% VOLTAGE RANGE INPUT XLG-200-24- I/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015,EN61000-3-2 Class C (@load50%) ; EN61000-3-3; Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)(10K/6KV option) DIMENSION 749.06K hrs min. Telcordia SR-332 (Bellcore) ; 200.67Khrs min. 199*63*35.5mm (L*W*H) PACKING 0.85Kg;16pcs /14.2Kg /0.72CUFT MIL-HDBK-217F (25) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7.Only for XLG-200 I series 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70 or less. 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 11.The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 12.Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information. 13.For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver series SPECIFICATION MODEL RATED CURRENT OUTPUT INPUT FULL POWER CURRENT RANGE 700~1050mA 3500~5550mA OPEN CIRCUIT VOLTAGE (max.) 300V 60V CURRENT ADJ. RANGE Adjustable for A/AB-Type only (via the built-in potentiometer) 350~1050mA CURRENT RIPPLE CURRENT TOLERANCE 3.0%(@ Load50% rated voltage) 5% SET UP TIME Note.4 500ms/230 VAC , 1200ms/115 VAC VOLTAGE RANGE Note.3 100 ~ 305VAC 142VDC ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" ang " DRIVING METHODS OF LED MODULE"section) 47 ~ 63Hz POWER FACTOR (Typ.) PF0.97 / 115VAC, PF0.95 / 230VAC, PF0.92 / 277VAC at full load (Please refer to "Power Factor Characteristic" section) TOTAL HARMONIC DISTORTION THD < 10% (@ load50% at 115 VAC /230 VAC ,@load75% at 277 VAC ) Please refer to " TOTAL HARMONIC DISTORTION ( THD )" section EFFICIENCY (Typ.) 94% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC COLD START 65A(twidth=550s measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. NO. of PSUs on 16A CIRCUIT BREAKER 3 unit(circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC STANDBY POWER CONSUMPTION Standby power consumption <0.5W for AB-Type(Dimming OFF) SHORT CIRCUIT Hiccup mode or Constant current limiting,recovers automatically after fault condition is removed OVER VOLTAGE 301 ~ 360V Shut down output voltage, re-power on to recovery OVER TEMPERATURE MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY 93% 61 ~ 78V 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage) can survive input voltage stress of 440Vac for 48 hours Shut down output voltage, recovers automatically after fault condition is removed Tcase=-40 ~ +90(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750(type"HL"), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; EAC TP TC 004;IP67 approved WITHSTAND VOLTAGE I/P-O/P:4.2 KVAC ISOLATION RESISTANCE I/P-O/P, I/P- FG , O/P- FG :100M Ohms / 500 VDC / 25/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (@ load50%); EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 1750~5550mA FREQUENCY RANGE WORKING TEMP. OTHERS 3500mA 200W 27 ~ 56V INPUT OVER VOLTAGE Note.5 EMC XLG-200-H- 700mA 200W RATED POWER CONSTANT CURRENT REGION Note.2 142 ~285V PROTECTION SAFETY & XLG-200-L- I/P- FG :2.1 KVAC O/P- FG :1.5 KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)(10K/6KV option) 749.06Khrs min. Telcordia SR-332(Bellcore) ; 200.67Khrs min. MIL-HDBK-217F (25) 199*63*35.5mm (L*W*H) 0.85Kg;16pcs/14.2Kg/0.72CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 5.Only for XLG-200 I series 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70 or less. 8. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 9.The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. 11.Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information. 12.For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver series BLOCK DIAGRAM PFC fosc : 50~120 KH z PWM fosc : 60~130 KH z EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM- O.C.P. (AB Type) FG O.L.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL O.T.P. O.V.P. DRIVING METHODS OF LED MODULE I - V Operating Area XLG-200-L 300V 56mA, 285V 350mA, 285V 280V 700mA, 285V 260V 240V 220V 1050mA, 190V 200V 180V 160V 140V 120V 0mA 700mA, 142V 56mA, 142V 250mA 500mA 1050mA, 142V 750mA 1000mA 1250mA Allow Operation Region Recommend Performance Region XLG-200-H XLG-200-12,24 This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 60V 280mA, 56V 55V 1750mA, 56V 3500mA, 56V 50V 100 45V Vo(%) 55 50mA, 36V 40V 35V (B) Constant Current area (A) Constant V oltage area 60 (min.) 30V 3 500mA, 28V 280mA, 28V 408mA, 27V 25V (C) Hiccup Protection 5550mA, 27V 20V 50 0mA 80 0mA 1600mA 2400mA Recommend Performance Region 3200mA 4000mA 4800mA 5600mA 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please please contact MEAN WELL. Io(%) Typical output current normalized by rated current (%) Allow Operation Region File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver series DIMMING OPERATION AC/N(Blue) AC/L(Brown) FG(Green/Yellow) Vo-(Black) Vo+(Red) XLG-200 DIM+( Blue ) DIM-(White) 3 in 1 dimming function (for AB-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.) Applying additive 0 ~ 10VDC 100% 90% Vo- + + - - DIM+ + Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% Vo- + + - - DIM+ Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input Applying additive resistance: 100% 90% Vo- + 80% + - - DIM+ Additive Resistance Output current (%) Vo+ 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to Vo-" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 230VAC 100 100 80 80 230VAC Input only 110VAC 60 LOAD (%) 60 LOAD (%) 230VAC Input only 40 20 -40 -30 -10 0 15 30 40 50 40 20 -40 70 (HORIZONTAL) -30 0 10 AMBIENT TEMPERATURE,Ta () 30 50 70 90 (HORIZONTAL) Tcase () If XLG-200 operates in Constant Power mode with the rated current the maximum workable Ta is 50 (Typ. 230VAC) or 40 (typ.110VAC) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 75 Constant Current Mode 1 100 0.9 90 0.8 0.7 PF 80 LOAD (%) 70 60 50 0.6 0.5 277V 0.4 230V 0.3 115V 0.2 0.1 40 0 50% 100 110 140 160 180 200 220 240 260 280 60% 70% INPUT VOLTAGE (V) 60Hz 90% 100% LOAD TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD XLG-200 series possess superior working efficiency that up to 94% can be reached in field applications. XLG-200-L Model, Tcase at 75 XLG-200-L Model, Tcase at 75 10% 96 9% 92 7% 6% 277V 5% 230V 4% 115V 3% EFFICIENCY(%) 8% THD 80% 305 88 84 230V 76 115V 72 2% 68 1% 64 0% 277V 80 60 50% 60% 70% 80% LOAD 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 80 90 Tcase ( ) File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver MECHANICAL SPECIFICATION Case No.:244A series Unit:mm Blank-Type 199 188 30020 85 35 tc SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 4-4.5 tc Vo-(Black) Vo+(Red) SJOW 17AWGx2C &05RN-F 2x1.0mm 2 (12V:SJOW 14AWG*2C) : Max. Case Temperature 35 35.5 45.8 63 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 30020 175 File Name:XLG-200-SPEC 2019-02-18 XLG-200 200W Constant Power Mode LED Driver MECHANICAL SPECIFICATION Case No.:244A Unit:mm 199 188 A-Type 30020 30020 45.8 175 tc 85 Vo-(Black) Vo+(Red) 35 63 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) series SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 SJOW 17AWGx2C &05RN-F 2x1.0mm 2 (12V:SJOW 14AWG*2C) 4-4.5 : Max. Case Temperature 35 35.5 tc 15 46 Io ADJ. AB-Type 199 188 30020 SJOW 17AWGx2C &05RN-F 2x1.0mm 2 63 45.8 tc 85 Vo-(Black) Vo+(Red) 35 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 30020 175 SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 DIM+( Blue ) DIM-(White) UL2517 20AWGx2C 4-4.5 32520 : Max. Case Temperature 35 35.5 tc 15 46 Io ADJ. INSTALLATION MANUAL File Name:XLG-200-SPEC 2019-02-18