VS-ETU3006SHM3, VS-ETU3006-1HM3 www.vishay.com Vishay Semiconductors Ultrafast Rectifier, 30 A FRED Pt(R) FEATURES * Low forward voltage drop * Ultrafast recovery time * 175 C operating junction temperature 2 * Low leakage current 3 3 1 D2PAK (TO-263AB) * AEC-Q101 qualified, meets JESD 201 class 1A whisker test 2 1 TO-262AA Base cathode 2 * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2 DESCRIPTION 1 N/C VS-ETU3006SHM3 Ultralow VF, soft-switching ultrafast rectifiers optimized for discontinuous (critical) mode (DCM) power factor correction (PFC). 3 Anode 1 N/C 3 Anode The minimized conduction loss, optimized stored charge and low recovery current minimized the switching losses and reduce over dissipation in the switching element and snubbers. VS-ETU3006-1HM3 PRIMARY CHARACTERISTICS Package D2PAK (TO-263AB), TO-262AA IF(AV) 30 A The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. VR 600 V VF at IF 1.15 V APPLICATIONS AC/DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PC, TV and monitor, games units, and DVD AC/DC power supplies. trr (typ.) 30 ns TJ max. 175 C Circuit configuration Single ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 600 V Repetitive peak reverse voltage VRRM Average rectified forward current IF(AV) TC = 113 C 30 Non-repetitive peak surge current IFSM TC = 25 C 200 Operating junction and storage temperatures TJ, TStg A -65 to +175 C ELECTRICAL SPECIFICATIONS (TJ = 25 C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS IR = 100 A IF = 30 A MIN. TYP. MAX. 600 - - - 1.4 2.0 1.35 IF = 30 A, TJ = 150 C - 1.15 VR = VR rated - 0.02 30 TJ = 150 C, VR = VR rated - 30 250 UNITS V Reverse leakage current IR Junction capacitance CT VR = 600 V - 20 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH A Revision: 26-Oct-17 Document Number: 94702 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETU3006SHM3, VS-ETU3006-1HM3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 C unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. IF = 1 A, dIF/dt = 50 A/s, VR = 30 V - 30 45 TJ = 25 C - 45 - TJ = 125 C - 100 - - 5.6 - - 10 - - 127 - - 580 - MIN. TYP. MAX. UNITS TJ, TStg -65 - 175 C Thermal resistance, junction-to-case RthJC - 0.95 1.4 C/W Thermal resistance, junction-to-ambient RthJA Typical socket mount - - 70 Thermal resistance, case-to-heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2.0 - g - 0.07 - oz. 6 (5) - 12 (10) kgf * cm (lbf * in) Reverse recovery time trr Peak recovery current TJ = 25 C IRRM Reverse recovery charge TEST CONDITIONS TJ = 125 C TJ = 25 C Qrr IF = 30 A dIF/dt = 200 A/s VR = 200 V TJ = 125 C UNITS ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS Weight Mounting torque Case style D2PAK (TO-263AB) ETU3006SH Case style TO-262AA ETU3006-1H 1000 1000 100 IR - Reverse Current (A) IF - Instantaneous Forward Current (A) Marking device TJ = 175 C TJ = 150 C 10 TJ = 25 C 175C 100 150C 10 125C 100C 1 75C 0.1 50C 25C 0.01 0.001 1 0.0 0.5 1.0 1.5 2.0 2.5 0 100 200 300 400 500 600 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 26-Oct-17 Document Number: 94702 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETU3006SHM3, VS-ETU3006-1HM3 www.vishay.com Vishay Semiconductors CT - Capacitance (pF) 1000 100 10 1 0 100 200 300 400 500 600 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Thermal Impedance ZthJC (C/W) ZthJC - Thermal Impedance (C/W) 10 D = 0.5 D = 0.2 D = 0.1 1 D = 0.05 D = 0.02 D = 0.01 0.1 0.01 1E-05 Single Pulse (Thermal Resistance) 1E-04 1E-03 1E-02 1E-0 1E+00 t1 - Rectangular Pulse Duration (s) 60 180 170 Average Power Loss (W) Allowable Case Temperature (C) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics 160 150 140 130 DC 120 110 100 90 RMS Limit 50 40 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC 30 20 10 0 0 5 10 15 20 25 30 35 40 45 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 0 5 10 15 20 25 30 35 40 45 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics Revision: 26-Oct-17 Document Number: 94702 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETU3006SHM3, VS-ETU3006-1HM3 www.vishay.com Vishay Semiconductors 130 1800 120 110 1600 100 1400 IF = 30 A, 125 C 1200 80 trr (nC) trr (ns) 90 70 60 800 IF = 30 A, 25 C 50 IF = 30 A, 125 C 1000 600 40 400 30 20 IF = 30 A, 25 C 200 typical value 10 100 typical value 0 100 1000 1000 dIFdt (A/s) dIFdt (A/s) Fig. 7 - Typical Reverse Recovery vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt VR = 200 V 0.01 L = 70 H D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM di(rec)M/dt (5) 0.75 IRRM (1) diF/dt (1) diF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Revision: 26-Oct-17 Document Number: 94702 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETU3006SHM3, VS-ETU3006-1HM3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- E T U 30 06 S TRL H M3 1 2 3 4 5 6 7 8 9 10 1 - Vishay Semiconductors product 2 - 3 - Circuit configuration E = single T = TO-220 4 - U = ultrafast recovery time 5 - Current code (30 = 30 A) 6 - Voltage code (06 = 600 V) 7 - * S = D2PAK (TO-263AB) - * -1 = TO-262AA - * None = tube - * TRL = tape and reel (left oriented, for D2PAK (TO-263AB) package) - * TRR = tape and reel (right oriented, for D2PAK (TO-263AB) package) 9 - H = AEC-Q101 qualified 10 - Environmental digit: 8 -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER TUBE MINIMUM ORDER QUANTITY VS-ETU3006SHM3 50 1000 PACKAGING DESCRIPTION Antistatic plastic tube VS-ETU3006-1HM3 50 1000 Antistatic plastic tube VS-ETU3006STRRHM3 800 800 13" diameter reel VS-ETU3006STRLHM3 800 800 13" diameter reel LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information SPICE model D2PAK (TO-263AB) www.vishay.com/doc?95046 TO-262AA www.vishay.com/doc?95419 D2PAK (TO-263AB) www.vishay.com/doc?95444 TO-262AA www.vishay.com/doc?95443 D2PAK (TO-263AB) www.vishay.com/doc?95032 www.vishay.com/doc?96438 Revision: 26-Oct-17 Document Number: 94702 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-ETU3006-1HM3 VS-ETU3006SHM3 VS-ETU3006STRLHM3 VS-ETU3006STRRHM3