UNISONIC TECHNOLOGIES CO., LTD TIP35C NPN SILICON TRANSISTOR HIGH POWER TRANSISTORS DESCRIPTION The UTC TIP35C is a NPN Expitaxial-Base transistor, designed for using in general purpose amplifier and switching applications. Complement to TIP36C. INTERNAL SCHEMATIC DIAGRAM C (2) TO-3P (1) B *Pb-free plating product number: TIP35CL E (3) ORDERING INFORMATION Order Number Normal Lead Free Plating TIP35C-T3P-K TIP35C-T3P-K TIP35CL-T3P-K Package TO-3P Pin Assignment 1 2 3 B C E Packing Bulk (1)Packing Type (1) K: Bulk (2)Package Type (2) T3P: TO-3P (3)Lead Plating (3) L: Lead Free Plating, Blank: Pb/Sn www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd 1 of 2 QW-R214-013,A TIP35C NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS PARAMETER Collector-Base Voltage (IE = 0) Collector-Emitter Voltage (IB = 0) Emitter-Base Voltage (IC = 0) Collector Current Collector Peak Current Base Current Total Dissipation (Tc =25 ) SYMBOL RATINGS UNIT VCBO 100 V VCEO 100 V VEBO 5 V IC 25 A ICM 50 A IB 5 A PD 125 W Junction Temperature TJ +150 Storage Temperature TSTG -65 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Thermal Resistance Junction-Case SYMBOL JC MIN TYP MAX 1 UNIT /W ELECTRICAL CHARACTERISTICS (Tc =25 , unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS Collector Cut-off Current (IB = 0) ICEO VCE = 60 V Emitter Cut-off Current (IC = 0) IEBO VEB = 5 V Collector Cut-off Current (VBE = 0) ICES VCE = Rated VCEO Collector-Emitter Sustaining Voltage (IB = 0) VCEO(SUS)* IC = 30 mA IB = 1.5 A, IC = 15 A Collector-Emitter Saturation Voltage VCE(SAT)* IB = 5 A, IC = 25 A VCE = 4 V, IC = 15 A Base-Emitter Voltage VBE(ON)* VCE = 4 V, IC = 25 A VCE = 4 V, IC = 1.5 A DC Current Gain hFE* VCE = 4 V, IC = 15 A Transition Frequency fT VCE = 10 V, IC = 1 A, f = 1 MHz Small Signal Current Gain hfe VCE = 10 V, IC = 1 A, f = 1 KHz * Pulsed: Pulse Duration = 300 s, Duty Cycle 2 % MIN 100 25 10 3 25 TYP MAX UNIT 1 mA 1 mA 0.7 mA V 1.8 V 4 V 2 V 4 V 50 MHz UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R214-013,A