SCHOTTKY RECTIFIER 10 Amp
Bulletin PD-21016 05/05
1
www.irf.com
This center tap Schottky ectifier has been optimized for low
reverse leakage at high temperature. The proprietary barrier
technology allows for reliable operation up to 175° C junction
temperature. Typical applications are in switching power
supplies, converters, free-wheeling diodes, and reverse
battery protection.
175° C TJ operation
Center tap configuration
Low forward voltage drop
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Lead-Free ("PbF" suffix)
Description/ Features
Major Ratings and Characteristics
IF(AV) Rectangular 10 A
waveform
VRRM 150 V
IFSM @ tp = 5 µs sine 620 A
VF@ 5 Apk, TJ = 125°C 0.73 V
(per leg)
TJrange - 55 to 175 °C
Characteristics Values Units
IF(AV) = 10Amp
VR = 150V
10CTQ150SPbF
10CTQ150-1PbF
Case Styles
D2PAK
10CTQ150SPbF 10CTQ150-1PbF
TO-262
Anode
13
2
Base
Common
Cathode
2
A
node
Common
Cathode
Anode
13
2
Base
Common
Cathode
2
A
node
Common
Cathode
10CTQ150SPbF, 10CTQ150-1PbF
2
Bulletin PD-21016 05/05
www.irf.com
IF(AV) Max. Average Forward (Per Leg) 5 A 50% duty cycle @ TC = 155°C, rectangular wave form
Current * See Fig. 5 (Per Device) 10
IFSM Max. Peak One Cycle Non-Repetitive 620 5µs Sine or 3µs Rect. pulse
Surge Current (Per Leg) * See Fig. 7 115 10ms Sine or 6ms Rect. pulse
EAS Non-Repetitive Avalanche Energy 6.75 mJ TJ = 25 °C, IAS
= 0.30 Amps, L = 150 mH
(Per Leg)
IAR Repetitive Avalanche Current 0.30 A Current decaying linearly to zero in 1 µsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Voltage Ratings
Absolute Maximum Ratings
Parameters Values Units Conditions
A
TJMax. Junction Temperature Range -55 to 175 °C
Tstg Max. Storage Temperature Range -55 to 175 °C
RthJC Max. Thermal Resistance Junction 3.50 °C/W DC operation
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction 1.75 °C/W DC operation
to Case (Per Package)
RthCS Typical Thermal Resistance, Case 0.50 °C/W Mounting surface , smooth and greased
to Heatsink (only for TO-220)
wt Approximate Weight 2 (0.07) g (oz.)
T Mounting Torque Min. 6 (5)
Max. 12 (10)
Marking Device 10CTQ150S Case style D2Pak
10CTQ150-1 Case style TO-262
Thermal-Mechanical Specifications
Kg-cm
(Ibf-in)
Parameters Values Units Conditions
VFM Max. Forward Voltage Drop 0.93 V @ 5A
(Per Leg) * See Fig. 1 (1) 1.10 V @ 10A
0.73 V @ 5A
0.86 V @ 10A
IRM Max. Reverse Leakage Current 0.05 mA TJ = 25 °C
(Per Leg) * See Fig. 2 (1) 7 mA TJ = 125 °C
VF(TO) Threshold Voltage 0.468 V TJ = TJ max.
rtForward Slope Resistance 28 mΩ
CTMax. Junction Capacitance (Per Leg) 200 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR)
TJ = 25 °C
TJ = 125 °C
Electrical Specifications
(1) Pulse Width < 300µs, Duty Cycle <2%
VR = rated VR
Parameters Values Units Conditions
150
Parameters 10CTQ150SPbF, 10CTQ150-1PbF
Following any rated
load condition and with
rated VRRM applied
3
Bulletin PD-21016 05/05
www.irf.com
10CTQ150SPbF, 10CTQ150-1PbF
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage (Per Leg)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
Fig. 1 - Max. Forward Voltage Drop
Characteristics (Per Leg)
1
10
100
00.511.522.53
F
FM
Forward Voltage Drop - V (V)
Instantaneous Forward Current - I (A)
T = 175°C
T = 125°C
T = 2 5 ° C
J
J
J
0.0001
0.001
0.01
0.1
1
10
100
0 255075100125150
R
R
T = 175°C
150°C
125°C
100°C
75°C
50°C
25°C
J
Reverse Current - I (mA)
Reverse Voltage - V (V)
10
100
1000
0 20406080100120140160
T = 25°C
J
R
T
Junction Capacitance - C (pF)
Reverse Voltage - V (V)
0.001
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1 10 100
thJC
t , Rectangular Pulse Duration (Seconds)
Si n g l e Pu l s e
( Th e rm a l Re sist a n c e )
1
Thermal Impeda nc e Z (°C/ W)
Not es:
1. Duty factor D = t / t
2. Peak T = P x Z + T
12
JthJC C
DM
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
2
t
1
t
P
DM
10CTQ150SPbF, 10CTQ150-1PbF
4
Bulletin PD-21016 05/05
www.irf.com
Fig. 8 - Unclamped Inductive Test Circuit
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC
;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
FREE- W HEEL
DIODE
40HFL40S02
C URRENT
MONITOR
HI G H- SPEED
SWITCH
IRFP460
L
DUT
Rg = 25 ohm
Vd = 25 Volt
+
120
130
140
150
160
170
180
02468
DC
Allowable Case Temperature - (°C)
F(A V )
see note (2)
Average Forward Current - I (A)
Sq ua re w ave (D = 0.50)
80% Rated V applied
R
0
1
2
3
4
5
012345678
DC
Average Power Loss - (Watts)
F(AV)
RM S Lim it
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
Average Forward Current - I (A)
100
1000
10 100 1000 10000
FSM
p
Non-Repetitive Surge Current - I (A)
At Any Rated Load Condition
And With Rated V Applied
Following Surge
RRM
Square Wave Pulse Duration - t (microsec)
5
Bulletin PD-21016 05/05
www.irf.com
10CTQ150SPbF, 10CTQ150-1PbF
Modified JEDEC outline TO-262
Dimensions in millimeters and (inches)
Anode
13
2
Base
Common
Cathode
2
A
node
Common
Cathode
Conform to JEDEC outline D2Pak (SMD-220)
Dimensions in millimeters and (inches)
Anode
13
2
Base
Common
Cathode
2
A
node
Common
Cathode
Outline Table
10CTQ150SPbF, 10CTQ150-1PbF
6
Bulletin PD-21016 05/05
www.irf.com
ASSEMBLY
LOT CODE
INTERNATIONAL
RECTIFIER
LOGO
LOT CODE 1789
EXAMPLE:
P = LEAD-FREE
PART NUMBER
WEEK 19
DATE CODE
THIS IS A 10CTQ150-1
ASSEMBLED ON WW 19, 2002
YEAR 2 = 2002
LOT CODE 8024
ASSEMBLED ON WW 02, 2000
ASSEMBLY
LOT CODE
LOGO
INTERNATIONAL
RECTIFIER
P = LEAD-FREE
DATE CODE
YEAR 0 = 2000
WEEK 02
PART NUMBER
THIS IS A 10CTQ150S
10CTQ150S
TRR
FEED DIRECTION
TRL
FEED DIRECTION
10.90 (0.429)
10.70 (0.421) 16.10 (0.634)
15.90 (0.626)
1.75 (0.069)
1.25 (0.049)
1.85 (0.073)
1.65 (0.065)
4.10 (0.161)
3.90 (0.153)
1.60 (0.063)
1.50 (0.059)
DIA.
1.60 (0.063)
1.50 (0.059)
DIA.
11.60 (0.457)
11.40 (0.449)
15.42 (0.609)
15.22 (0.601)
4.72 (0.186)
4.52 (0.178)
24.30 (0.957)
23.90 (0.941)
0.368 (0.0145)
0.342 (0.0135)
360 (1 4.173)
DIA. MAX.
26.40 (1.039)
24.40 (0.961)
13.50 (0.532)
12.80 (0.504) DIA.
60 (2 .362)
DIA. MIN.
SMD-220 Tape & Reel
When ordering, indicate the part
number, part orientation, and the
quantity. Quantities are in multiples
of 800 p ieces per reel for both
TRL and TRR.
Dimensions in millimeters and (inches)
Tape & Reel Information
Part Marking Information
D2PAK
TO-262
7
Bulletin PD-21016 05/05
www.irf.com
10CTQ150SPbF, 10CTQ150-1PbF
Ordering Information Table
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/05
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
10 C T Q 150 S TRL PbF
Device Code
152 4
36
1- Current Rating (10A)
2- Circuit Configuration
C = Common Cathode
3- T = TO-220
4- Schottky "Q" Series
5- Voltage Rating (150 = 150V)
6-y S = D2Pak
y -1= TO-262
7-y none = Tube (50 pieces)
y TRL = Tape & Reel (Left Oriented - for D2Pak only)
y TRR = Tape & Reel (Right Oriented - for D2Pak only)
8-y none = Standard Production
y PbF = Lead-Free
7 8
