January 2019
MULTILAYER CERAMIC CHIP CAPACITORS
MULTILAYER CERAMIC CHIP CAPACITORS
CGA1 0603 [0201 inch]
CGA2 1005 [0402 inch]
CGA3 1608 [0603 inch]
CGA4 2012 [0805 inch]
CGA5 3216 [1206 inch]
CGA6 3225 [1210 inch]
CGA8 4532 [1812 inch]
CGA9 5750 [2220 inch]
* Dimensions code: JIS[EIA]
Automotive grade, general (Up to 75V)
CGA series
(2/23)
20190129 / mlcc_automotive_general_en.fm
MULTILAYER CERAMIC CHIP CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or
property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for
any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed
below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment (excepting Pharmaceutical Affairs Law
classification Class1,2)
(4) Power-generation control equipment
(5) Atomic energy-related equipment  
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not
prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability,
or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution
will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions.
2. We may modify products or discontinue production of a product listed in this catalog without prior notification.
3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly
recommend that you exchange these delivery specifications with customers that use one of these products.
4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and For-
eign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you
use a product listed in this catalog. We do not grant license of these rights.
7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to
products that are purchased through other third parties.
REMINDERS
Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail.
This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number
orders.
Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the
product label.
Contact your local TDK Sales representative for more information.
(Example)
Catalog issued date Catalog number Item description (on delivery label)
Prior to January 2013 C1608C0G1E103J(080AA) C1608C0G1E103JT000N
January 2013 and later C1608C0G1E103J080AA C1608C0G1E103JT000N
(3/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
CGA series
General (Up to 75V)
Type: CGA1/0603 [0201 inch], CGA2/1005 [0402 inch], CGA3/1608 [0603 inch],
CGA4/2012 [0805 inch], CGA5/3216 [1206 inch], CGA6/3225 [1210 inch],
CGA8/4532 [1812 inch], CGA9/5750 [2220 inch]
SERIES OVERVIEW
TDK multilayer ceramic chip capacitor automotive grade CGA series is a product for surface mount which multiple sheets of dielectric and conduc-
tive material are layered alternately. The monolithic structure ensures superior mechanical strength and reliability.
Also the lower ESR, ESL and better frequency characteristics are offered by the simple structure than other capacitors. The capacitance range is up
to 47µF and the line-up has been expanding to the region of the film capacitor or electrolytic capacitor.
FEATURES
The superior mechanical strength and reliability due to the monolithic
structure.
Low ESR, ESL and excellent frequency characteristics allow for a cir-
cuit design that closely conforms to theoretical values.
Low self-heating and high ripple resistance due to low ESR.
•No polarity.
AEC-Q200 compliant.
APPLICATIONS
Automotive electronic equipment (Engine control units, Sensor mod-
ules and Battery line smoothing)
LC resonance circuit (C0G).
Applications requiring higher reliability
SHAPE & DIMENSIONS PRODUCT STRUCTURE
Dimensional tolerances are typical values.
W
T
L
G
B
L
W
T
B
G
Body length
Body width
Body height
Terminal width
Terminal spacing
Sn
Ni
Cu
The structure which multiple sheets of dielectric and conductive material
are layered alternately. The superior mechanical strength and reliability
are realized by the monolithic and simple structure.
Dimensions in mm
Type L W T B G
CGA1 0.60±0.03 0.30±0.03 0.30±0.03 0.10 min. 0.20 min.
CGA2 1.00±0.05 0.50±0.05 0.50±0.05 0.10 min. 0.30 min.
CGA3 1.60±0.10 0.80±0.10 0.80±0.10 0.20 min. 0.30 min.
CGA4 2.00±0.20 1.25±0.20 1.25±0.20 0.20 min. 0.50 min.
CGA5 3.20±0.20 1.60±0.20 1.60±0.20 0.20 min. 1.00 min.
CGA6 3.20±0.40 2.50±0.30 2.50±0.30 0.20 min.
CGA8 4.50±0.40 3.20±0.40 2.50±0.30 0.20 min.
CGA9 5.70±0.40 5.00±0.40 2.50±0.30 0.20 min.
REACH
SVHC-Free
Lead
Free
RoHS
Pb
Halogen
Free
Br
Cl
(4/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
CATALOG NUMBER CONSTRUCTION
(1) Series
(2) Dimensions L x W (mm)
(3) Thickness code
(4) Voltage condition for life test
(5) Temperature characteristics
(6) Rated voltage (DC)
(7) Nominal capacitance (pF)
The capacitance is expressed in three digit codes and in units of
pico Farads (pF). The first and second digits identify the first and
second significant figures of the capacitance. The third digit identi-
fies the multiplier. R designates a decimal point.
(Example)0R5 = 0.5pF
101 = 100pF
225 = 2,200,000pF = 2.2µF
(8) Capacitance tolerance
(9) Thickness
(10) Packaging style
(11) Special reserved code
CGA 6 P 1 X7R 1N 106 M 250 A C
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
Code EIA Length Width Te r min a l w i d t h
1 CC0201 0.60 0.30 0.10
2 CC0402 1.00 0.50 0.10
3 CC0603 1.60 0.80 0.20
4 CC0805 2.00 1.25 0.20
5 CC1206 3.20 1.60 0.20
6 CC1210 3.20 2.50 0.20
8 CC1812 4.50 3.20 0.20
9 CC2220 5.70 5.00 0.20
Code Thickness
A0.30 mm
B0.50 mm
C0.60 mm
E0.80 mm
F0.85 mm
H1.15 mm
J1.25 mm
L1.60 mm
M2.00 mm
N2.30 mm
P2.50 mm
Q2.80 mm
R3.20 mm
Symbol Condition
11 × R.V.
22 × R.V.
3 1.5 × R.V.
Temperature
characteristics
Temperature coefficient
or capacitance change Temperature range
C0G 0±30 ppm/°C –55 to +125°C
X5R ±15% –55 to +85°C
X7R ±15% –55 to +125°C
X7S ±22% –55 to +125°C
Code Voltage (DC)
0J 6.3V
1A 10V
1C 16V
1E 25V
1V 35V
1H 50V
1N 75V
Code To l e r a n ce
C ±0.25pF
D ±0.50pF
5%
K ±10%
M ±20%
Code Thickness
030 0.30 mm
050 0.50 mm
060 0.60 mm
080 0.80 mm
085 0.85 mm
115 1.15 mm
125 1.25 mm
160 1.60 mm
200 2.00 mm
230 2.30 mm
250 2.50 mm
280 2.80 mm
320 3.20 mm
Code Style
A 178mm reel, 4mm pitch
B 178mm reel, 2mm pitch
K 178mm reel, 8mm pitch
Code Description
A,B,C TDK internal code
(5/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   0.30mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA1/0603 [0201 inch]
Capacitance C0G X7R
(pF) Code 1H
(50V)
1E
(25V)
1H
(50V)
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
1010
1.5 1R5
2020
2.2 2R2
3030
3.3 3R3
4040
4.7 4R7
5050
6060
6.8 6R8
7070
8080
9090
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
150 151
220 221
330 331
470 471
680 681
1,000 102
1,500 152
2,200 222
3,300 332
4,700 472
6,800 682
10,000 103
(6/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   0.50mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA2/1005 [0402 inch]
Capacitance C0G X5R X7R X7S
(pF) Code 1H
(50V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
1A
(10V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
1C
(16V)
1A
(10V)
1010
1.5 1R5
2020
2.2 2R2
3030
3.3 3R3
4040
4.7 4R7
5050
6060
6.8 6R8
7070
8080
9090
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1,000 102
1,500 152
2,200 222
3,300 332
4,700 472
6,800 682
10,000 103
15,000 153
22,000 223
33,000 333
47,000 473
68,000 683
100,000 104
150,000 154
220,000 224
330,000 334
470,000 474
Background gray: The product which is not recommended to a new design.
(7/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   0.80mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA3/1608 [0603 inch]
Capacitance C0G X5R X7R
(pF) Code 1H
(50V)
1H
(50V)
1H
(50V)
1010
1.5 1R5
2020
2.2 2R2
3030
3.3 3R3
4040
4.7 4R7
5050
6060
6.8 6R8
7070
8080
9090
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1,000 102
1,200 122
1,500 152
1,800 182
2,200 222
2,700 272
3,300 332
3,900 392
4,700 472
5,600 562
6,800 682
8,200 822
10,000 103
15,000 153
22,000 223
33,000 333
47,000 473
68,000 683
Background gray: The product which is not recommended to a new design.
(8/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   0.80mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA3/1608 [0603 inch]
Capacitance X5R X7R X7S
(pF) Code 1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
0J
(6.3V)
1C
(16V)
1A
(10V)
0G
(4V)
100,000 104
150,000 154
220,000 224
330,000 334
470,000 474
680,000 684
1,000,000 105
1,500,000 155
2,200,000 225
3,300,000 335
4,700,000 475
10,000,000 106
Background gray: The product which is not recommended to a new design.
(9/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   0.60 mm0.85 mm1.25 mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA4/2012 [0805 inch]
Capacitance C0G X5R X7R X7S
(pF) Code 1H
(50V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
1A
(10V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
1E
(25V)
1C
(16V)
1A
(10V)
1,000 102
1,200 122
1,500 152
1,800 182
2,200 222
2,700 272
3,300 332
3,900 392
4,700 472
5,600 562
6,800 682
8,200 822
10,000 103
15,000 153
22,000 223
33,000 333
100,000 104
150,000 154
220,000 224
330,000 334
470,000 474
680,000 684
1,000,000 105
1,500,000 155
2,200,000 225
3,300,000 335
4,700,000 475
6,800,000 685
10,000,000 106
Background gray: The product which is not recommended to a new design.
(10/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   0.60 mm0.85 mm1.15 mm1.60 mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Standard thickness   1.25 mm1.60 mm2.00 mm2.30 mm2.50 mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA5/3216 [1206 inch]
Capacitance C0G X5R X7R X7S
(pF) Code 1H
(50V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
0J
(6.3V)
1A
(10V)
4,700 472
5,600 562
6,800 682
8,200 822
10,000 103
15,000 153
22,000 223
33,000 333
47,000 473
68,000 683
100,000 104
470,000 474
680,000 684
1,000,000 105
1,500,000 155
2,200,000 225
3,300,000 335
4,700,000 475
6,800,000 685
10,000,000 106
15,000,000 156
22,000,000 226
Background gray: The product which is not recommended to a new design.
Capacitance range chart CGA6/3225 [1210 inch]
Capacitance C0G X7R X7S
(pF) Code 1H
(50V)
1N
(75V)
1H
(50V)
1E
(25V)
1C
(16V)
1H
(50V)
0J
(6.3V)
22,000 223
33,000 333
47,000 473
68,000 683
100,000 104
1,000,000 105
1,500,000 155
2,200,000 225
3,300,000 335
4,700,000 475
6,800,000 685
10,000,000 106
15,000,000 156
22,000,000 226
33,000,000 336
47,000,000 476
Background gray: The product which is not recommended to a new design.
(11/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Standard thickness   1.60 mm2.00 mm2.30 mm2.50 mm2.80 mm3.20 mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Standard thickness   2.00 mm2.30 mm2.50 mm
Please refer to the capacitance range table at P-12 and after for the details such as product thickness and capacitance tolerance.
Capacitance range chart CGA8/4532 [1812 inch]
Capacitance C0G X7R
(pF) Code 1H
(50V)
1H
(50V)
1E
(25V)
1C
(16V)
47,000 473
68,000 683
100,000 104
150,000 154
220,000 224
1,500,000 155
2,200,000 225
3,300,000 335
4,700,000 475
6,800,000 685
10,000,000 106
15,000,000 156
22,000,000 226
33,000,000 336
Background gray: The product which is not recommended to a new design.
Capacitance range chart CGA9/5750 [2220 inch]
Capacitance X7R
(pF) Code 1H
(50V)
1E
(25V)
1C
(16V)
4,700,000 475
6,800,000 685
10,000,000 106
15,000,000 156
22,000,000 226
47,000,000 476
Background gray: The product which is not recommended to a new design.
(12/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range table
Temperature characteristics: C0G (–55 to +125°C, 0±30ppm/°C)
Capacitance Dimensions Thickness
mm
Capacitance
tolerance
Catalog number
Rated voltage Edc: 50V Rated voltage Edc: 25V
1pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H010C030BA CGA1A2C0G1E010C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H010C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H010C080AA
1.5pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H1R5C030BA CGA1A2C0G1E1R5C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H1R5C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H1R5C080AA
2pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H020C030BA CGA1A2C0G1E020C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H020C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H020C080AA
2.2pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H2R2C030BA CGA1A2C0G1E2R2C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H2R2C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H2R2C080AA
3pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H030C030BA CGA1A2C0G1E030C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H030C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H030C080AA
3.3pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H3R3C030BA CGA1A2C0G1E3R3C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H3R3C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H3R3C080AA
4pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H040C030BA CGA1A2C0G1E040C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H040C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H040C080AA
4.7pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H4R7C030BA CGA1A2C0G1E4R7C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H4R7C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H4R7C080AA
5pF
0603 0.30±0.03 ±0.25pF CGA1A2C0G1H050C030BA CGA1A2C0G1E050C030BA
1005 0.50±0.05 ±0.25pF CGA2B2C0G1H050C050BA
1608 0.80±0.10 ±0.25pF CGA3E2C0G1H050C080AA
6pF
0603 0.30±0.03 ±0.50pF CGA1A2C0G1H060D030BA CGA1A2C0G1E060D030BA
1005 0.50±0.05 ±0.50pF CGA2B2C0G1H060D050BA
1608 0.80±0.10 ±0.50pF CGA3E2C0G1H060D080AA
6.8pF
0603 0.30±0.03 ±0.50pF CGA1A2C0G1H6R8D030BA CGA1A2C0G1E6R8D030BA
1005 0.50±0.05 ±0.50pF CGA2B2C0G1H6R8D050BA
1608 0.80±0.10 ±0.50pF CGA3E2C0G1H6R8D080AA
7pF
0603 0.30±0.03 ±0.50pF CGA1A2C0G1H070D030BA CGA1A2C0G1E070D030BA
1005 0.50±0.05 ±0.50pF CGA2B2C0G1H070D050BA
1608 0.80±0.10 ±0.50pF CGA3E2C0G1H070D080AA
8pF
0603 0.30±0.03 ±0.50pF CGA1A2C0G1H080D030BA CGA1A2C0G1E080D030BA
1005 0.50±0.05 ±0.50pF CGA2B2C0G1H080D050BA
1608 0.80±0.10 ±0.50pF CGA3E2C0G1H080D080AA
9pF
0603 0.30±0.03 ±0.50pF CGA1A2C0G1H090D030BA CGA1A2C0G1E090D030BA
1005 0.50±0.05 ±0.50pF CGA2B2C0G1H090D050BA
1608 0.80±0.10 ±0.50pF CGA3E2C0G1H090D080AA
10pF
0603 0.30±0.03 ±0.50pF CGA1A2C0G1H100D030BA CGA1A2C0G1E100D030BA
1005 0.50±0.05 ±0.50pF CGA2B2C0G1H100D050BA
1608 0.80±0.10 ±0.50pF CGA3E2C0G1H100D080AA
12pF
0603 0.30±0.03 ±5% CGA1A2C0G1H120J030BA CGA1A2C0G1E120J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H120J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H120J080AA
15pF
0603 0.30±0.03 ±5% CGA1A2C0G1H150J030BA CGA1A2C0G1E150J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H150J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H150J080AA
18pF
0603 0.30±0.03 ±5% CGA1A2C0G1H180J030BA CGA1A2C0G1E180J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H180J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H180J080AA
22pF
0603 0.30±0.03 ±5% CGA1A2C0G1H220J030BA CGA1A2C0G1E220J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H220J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H220J080AA
27pF
0603 0.30±0.03 ±5% CGA1A2C0G1H270J030BA CGA1A2C0G1E270J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H270J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H270J080AA
33pF
0603 0.30±0.03 ±5% CGA1A2C0G1H330J030BA CGA1A2C0G1E330J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H330J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H330J080AA
39pF
0603 0.30±0.03 ±5% CGA1A2C0G1H390J030BA CGA1A2C0G1E390J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H390J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H390J080AA
47pF
0603 0.30±0.03 ±5% CGA1A2C0G1H470J030BA CGA1A2C0G1E470J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H470J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H470J080AA
(13/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Gray item: The product which is not recommended to a new design.
Capacitance range table
Temperature characteristics: C0G (–55 to +125°C, 0±30ppm/°C)
Capacitance Dimensions Thickness
mm
Capacitance
tolerance
Catalog number
Rated voltage Edc: 50V Rated voltage Edc: 25V
56pF
0603 0.30±0.03 ±5% CGA1A2C0G1H560J030BA CGA1A2C0G1E560J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H560J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H560J080AA
68pF
0603 0.30±0.03 ±5% CGA1A2C0G1H680J030BA CGA1A2C0G1E680J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H680J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H680J080AA
82pF
0603 0.30±0.03 ±5% CGA1A2C0G1H820J030BA CGA1A2C0G1E820J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H820J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H820J080AA
100pF
0603 0.30±0.03 ±5% CGA1A2C0G1H101J030BA CGA1A2C0G1E101J030BA
1005 0.50±0.05 ±5% CGA2B2C0G1H101J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H101J080AA
120pF 1005 0.50±0.05 ±5% CGA2B2C0G1H121J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H121J080AA
150pF 1005 0.50±0.05 ±5% CGA2B2C0G1H151J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H151J080AA
180pF 1005 0.50±0.05 ±5% CGA2B2C0G1H181J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H181J080AA
220pF 1005 0.50±0.05 ±5% CGA2B2C0G1H221J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H221J080AA
270pF 1005 0.50±0.05 ±5% CGA2B2C0G1H271J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H271J080AA
330pF 1005 0.50±0.05 ±5% CGA2B2C0G1H331J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H331J080AA
390pF 1005 0.50±0.05 ±5% CGA2B2C0G1H391J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H391J080AA
470pF 1005 0.50±0.05 ±5% CGA2B2C0G1H471J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H471J080AA
560pF 1005 0.50±0.05 ±5% CGA2B2C0G1H561J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H561J080AA
680pF 1005 0.50±0.05 ±5% CGA2B2C0G1H681J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H681J080AA
820pF 1005 0.50±0.05 ±5% CGA2B2C0G1H821J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H821J080AA
1nF
1005 0.50±0.05 ±5% CGA2B2C0G1H102J050BA
1608 0.80±0.10 ±5% CGA3E2C0G1H102J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H102J060AA
1.2nF 1608 0.80±0.10 ±5% CGA3E2C0G1H122J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H122J060AA
1.5nF 1608 0.80±0.10 ±5% CGA3E2C0G1H152J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H152J060AA
1.8nF 1608 0.80±0.10 ±5% CGA3E2C0G1H182J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H182J060AA
2.2nF 1608 0.80±0.10 ±5% CGA3E2C0G1H222J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H222J060AA
2.7nF 1608 0.80±0.10 ±5% CGA3E2C0G1H272J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H272J060AA
3.3nF 1608 0.80±0.10 ±5% CGA3E2C0G1H332J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H332J060AA
3.9nF 1608 0.80±0.10 ±5% CGA3E2C0G1H392J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H392J060AA
4.7nF
1608 0.80±0.10 ±5% CGA3E2C0G1H472J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H472J060AA
3216 0.60±0.15 ±5% CGA5C2C0G1H472J060AA
5.6nF
1608 0.80±0.10 ±5% CGA3E2C0G1H562J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H562J060AA
3216 0.60±0.15 ±5% CGA5C2C0G1H562J060AA
6.8nF
1608 0.80±0.10 ±5% CGA3E2C0G1H682J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H682J060AA
3216 0.60±0.15 ±5% CGA5C2C0G1H682J060AA
8.2nF
1608 0.80±0.10 ±5% CGA3E2C0G1H822J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H822J060AA
3216 0.60±0.15 ±5% CGA5C2C0G1H822J060AA
10nF
1608 0.80±0.10 ±5% CGA3E2C0G1H103J080AA
2012 0.60±0.15 ±5% CGA4C2C0G1H103J060AA
3216 0.60±0.15 ±5% CGA5C2C0G1H103J060AA
15nF 2012 0.85±0.15 ±5% CGA4F2C0G1H153J085AA
3216 0.60±0.15 ±5% CGA5C2C0G1H153J060AA
22nF
2012 1.25±0.20 ±5% CGA4J2C0G1H223J125AA
3216 0.60±0.15 ±5% CGA5C2C0G1H223J060AA
3225 1.25±0.20 ±5% CGA6J2C0G1H223J125AA
(14/23)
20190129 / mlcc_automotive_general_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
Gray item: The product which is not recommended to a new design.
Capacitance range table
Temperature characteristics: C0G (–55 to +125°C, 0±30ppm/°C)
Capacitance Dimensions Thickness
mm
Capacitance
tolerance
Catalog number
Rated voltage Edc: 50V
33nF
2012 1.25±0.20 ±5% CGA4J2C0G1H333J125AA
3216 0.85±0.15 ±5% CGA5F2C0G1H333J085AA
3225 1.60±0.20 ±5% CGA6L2C0G1H333J160AA
47nF
3216 1.15±0.15 ±5% CGA5H2C0G1H473J115AA
3225 2.00±0.20 ±5% CGA6M2C0G1H473J200AA
4532 1.60±0.20 ±5% CGA8L2C0G1H473J160KA
68nF
3216 1.60±0.20 ±5% CGA5L2C0G1H683J160AA
3225 2.00±0.20 ±5% CGA6M2C0G1H683J200AA
4532 1.60±0.20 ±5% CGA8L2C0G1H683J160KA
100nF
3216 1.60±0.20 ±5% CGA5L2C0G1H104J160AA
3225 2.50±0.30 ±5% CGA6P2C0G1H104J250AA
4532 2.00±0.20 ±5% CGA8M2C0G1H104J200KA
150nF 4532 2.50±0.30 ±5% CGA8P2C0G1H154J250KA
220nF 4532 3.20±0.30 ±5% CGA8R2C0G1H224J320KA