GS40A48-P1J - Mean Well - Datasheet.Live

SPECIFICATION

ORDER NO.

SAFETY MODEL NO.

DC VOLTAGE Note.2

RATED CURRENT

CURRENT RANGE

RATED POWER (max.)

RIPPLE & NOISE (max.) Note.3

OUTPUT

VOLTAGE RANGE Note.7

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INPUT

ENVIRONMENT

INRUSH CURRENT (max.)

LEAKAGE CURRENT(max.)

SAFETY STANDARDS

SAFETY &

EMC

(Note. 8)

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

PROTECTION

GS40A05

GS40A05-P1J GS40A07-P1J GS40A09-P1J GS40A12-P1J GS40A15-P1J GS40A18-P1J GS40A24-P1J GS40A48-P1J

7.5V

GS40A07

GS40A09

12V

GS40A12

15V

GS40A15

18V

GS40A18

24V

GS40A24

48V

GS40A48

100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p

VOLTAGE TOLERANCE Note.4

LINE REGULATION Note.5

LOAD REGULATION

±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.5% ±2.5%

±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%

±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.5% ±2.5%

90 ~ 264VAC 127 ~ 370VDC

47 ~ 63Hz

80.5% 85.5%

7.88 ~ 10.13V

85%

9.45 ~ 12.15V

89%

12.6 ~ 16.2V

89.5%

15.75 ~ 20.25V

90%

18.9 ~ 24.3V

91%

25.2 ~ 32.4V

92%

50.4 ~ 64.8V

1A / 115VAC 0.5A / 230VAC

65A / 230VAC

0.75mA / 240VAC

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

711K hrs min. MIL-HDBK-217F(25 )℃

-30 ~ +60 (Refer to "Derating Curve")℃

20% ~ 90% RH non-condensing

-40 ~ +85 , 10 ~ 95% RH℃

±℃℃0.03% / (0 ~ 50 )

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

125*50*31.5mm (L*W*H)

0.28Kg; 40pcs/12.02Kg/1.05CUFT

CONNECTOR

PLUG

CABLE See page 2 ; Other type available by customer requested

See page 2 ; Other type available by customer requested

1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. ℃

2. DC voltage: The output voltage set at point measure by plug terminal & 50% load.

3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.

4. Tolerance: includes set up tolerance, line regulation, load regulation.

5. Line regulation is measured from low line to high line at rated load.

6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

7. Derating may be needed under low input voltages. Pleas check the derating curve for more details.

8. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the

EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.

(as available on http://www.meanwell.com)

40WAC-DC Industrial Adaptor GS40 series

■Features :

Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A

Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1

OVERLOAD

OVER VOLTAGE

105 ~ 150% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

5.25 ~ 6.75V

5A 5.34A 4.45A 3.34A 2.67A 2.22A 1.67A 0.84A

0 ~ 5A 0 ~ 5.34A 0 ~ 4.45A 0 ~ 2.67A 0 ~ 2.22A 0 ~ 1.67A

0 ~ 0.84A

25W 40W 40W 40W

0 ~ 3.34A

40W 40W 40W 40W

Protection type : Shut down o/p voltage, re-power on to recover

Universal AC input / Full range

No load power consumption<0.3W

Energy efficiency Level Ⅴ

Comply with EISA 2007, NRCan, AU/NZ MEPS and EU ErP

3 pole AC inlet IEC320-C14

Class power (with earth pin)I

Protections: Short circuit / Overload / Over voltage

Pass LPS

Fully enclosed plastic case

LED indicator for power on

2 years warranty

1000ms, 30ms / 230VAC 1000ms, 30ms / 115VAC at full load

50ms / 230VAC 15ms / 115VAC at full load

SETUP, RISE TIME Note.6

HOLD UP TIME (Typ.)

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

EMC IMMUNITY

EMC EMISSION

File Name:GS40-SPEC 2015-06-01

UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, approvedPSE J60950-1(except for 48V)

(except for 48V)