154BC Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0 - 100mV Output Gage and Absolute Wide Compensated Temperature Range DESCRIPTION The 154BC is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel or ASTM Grade 2 CP titanium housing. The 154BC is a low cost unit designed without a header for o-ring mounting and OEM applications where compatibility with corrosive media is required. The titanium option offers greater resistance to corrosive materials and harsh cleaning chemicals, opening the range of its application use to things such as dialysis machines and salt/brackish water measurements. The sensing package utilizes silicone oil to transfer pressure from either a 316L stainless steel or titanium diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within 1%. Please refer to the 154N uncompensated and constant voltage datasheets for more information on different features of the 154. FEATURES APPLICATIONS O-Ring Mount -20C to +85C Compensated Temperature 1.0% Interchangeable Span (provided by gain set resistor) Solid State Reliability 0.3% Pressure Non Linearity Titanium Option Medical Instruments (Dialysis Machines) Process Control Fresh, Waste, Salt and Brackish Water Measurements Refrigeration/Compressors Pressure Transmitters Hydraulic Controls STANDARD RANGES Range (psi) Gage 0 to 015 0 to 030 0 to 050 0 to 100 0 to 300 154BC Range (Bar) Absolute 0 to 007 0 to 012 0 to 018 0 to 028 www.meas-spec.com 1/4 February 2015 154BC PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Span 75 100 150 mV 1 Zero Pressure Output -1.0 0 1.0 mV 2 Pressure Non Linearity -0.30 0.30 %Span 3 Pressure Hysteresis -0.20 0.20 %Span Repeatability 0.02 Input Resistance 2.0 Output Resistance 3.5 %Span 5.8 k 3.0 6.0 k Temperature Error - Span -1.0 1.0 %Span 4 Temperature Error - Offset -1.0 1.0 %Span 4 Thermal Hysteresis - Span -0.25 0.05 0.25 %Span 4 Thermal Hysteresis - Offset -0.25 0.05 0.25 %Span 4 Long Term Stability - Span 0.10 Long Term Stability - Offset 0.25 Supply Current 0.5 1.5 3 %Span/Year %Span/Year mA 5 Output Load Resistance 5 M 6 Insulation Resistance (50Vdc) 50 M 7 Output Noise (10Hz to 1kHz) 1.0 Response Time (10% to 90%) 0.1 2.0 uV p-p ms Overload Pressure 2X Rated 8 Burst Pressure 3X Rated 9 Compensated Temperature -20 +85 C Operating Temperature -40 +125 C 10 Storage Temperature -50 +125 C 10 Media - Pressure Port Liquids and Gases compatible with 316L Stainless Steel or ASTM Grade 2 CP Titanium Notes 1. For amplified output circuits, 3.012V 1% interchangeability with gain set resistor. See application schematic. 2. Measured at vacuum for absolute (A), ambient for gage (G). 3. Best fit straight line. 4. Over the compensated temperature range with respect to 25C. 5. Guarantees output/input ratiometricity. 6. Load resistance to reduce measurement errors due to output loading. 7. Between case and sensing element. 8. 2X or 500psi, whichever is less. The maximum pressure that can be applied without changing the transducer's performance or accuracy. 9. 3X or 600psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 10. Maximum temperature range for product with standard cable and connector is -20C to +105C. 154BC www.meas-spec.com 2/4 February 2015 154BC DIMENSIONS 154BC www.meas-spec.com 3/4 February 2015 154BC APPLICATION SCHEMATIC ORDERING INFORMATION 154BC - S - 100PG - C Model - Material - Pressure Type and Range - Electrical 154BC - - P = Solder Pads R = Ribbon Cable C = Cable w/ Connector S = 316L Stainless Steel T = ASTM Grade 2 CP Ti - 015PG 030PG 050PG 100PG 300PG 007BA 012BA 018BA 028BA NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rig hts to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 154BC www.meas-spec.com 4/4 February 2015 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 154BC-S-028BA-C 154BC-S-012BA-C 154BC-T-015PG-C 154BC-T-028BA-C 154BC-S-030PG-C 154BC-T012BA-C 154BC-T-030PG-C 154BC-S-015PG-C