ABCIRH Halogen Free Connectors The AB Connectors Industrial Range (H - halogen free) is based on the products covered by the American MilC5015 and the German VG95234 specifications. These connectors are used extensively throughout the mass transportation, entertainment and general industrial markets. ABCIRH connectors are interchangeable with all corresponding types and feature contact arrangements from Mil-STD-1651. Positive coupling is indicated by an audible 'snap' and by the alignment of three coloured dots on the receptacle and on the coupling nut of the plug connector. To enhance service life in applications where the connectors are likely to experience severe vibration or repeated mating, ABCIRH connectors feature stainless steel anti-wear pins at the critical point of the receptacle coupling ramps. In response to safety and environmental requirements, ABCIRH connectors have as standard, low fire hazard/halogen free rubber insulators which have been independently tested and shown to conform to the requirements of French specification NF F 16-101 classification 12 F1 and to British specification BS 6853 app. A clause A.9 and app. B clause B.5.1. Connector shells can also be supplied with cadmium free plating finishes. Protection against water and dust ingress is provided by the use of a dynamic seal ring under the coupling nut and by an individual wire seal grommet at the rear of the connector. A wavy washer assembly, also under the coupling nut and a comprehensive range of back shells and accessories, ensure excellent continuity and shielding characteristics between mated connectors where the effects of EMI and RFI must be eliminated. ABCIRH Connectors Catalogue Index Page 2 General Information............................................................................ 3 Electrical Data .................................................................................... 4 Part Number Explanation................................................................... F80 Contact arrangements.................................................................. 5 F80 Contact Arrangement Selection Chart.......................................... 18 Alternative Insert Orientations............................................................. 20 F80 Crimp Contacts - Pin ................................................................... 22 F80 Crimp Contacts - Socket.............................................................. 23 F80 Crimp Contacts - Low Insertion Force Socket .............................. 24 F80 Coaxial Contacts ......................................................................... 25 F80 Twinaxial Contacts ...................................................................... 26 Front Mounting Receptacle - ABCIRH00 ............................................ 27 Cable Mounted Receptacle - ABCIRH01 ............................................ 31 Rear Mounting Receptacle - ABCIRH03 ............................................. 34 Size 49 Front Mounting Receptacle - ABCIRH04 ............................... 38 Size 49 Rear Mounting Receptacle - ABCIRH05 ................................ 39 Plug - ABCIRH06/SE06 ...................................................................... 40 Plug, Rubber Covered Coupling Nut -ABCIRHP06.............................. 43 Size 49 Plug - ABCIRHP06 ................................................................ 46 Through Bulkhead Receptacle - ABCIRH07 ....................................... 47 Rear Mounting Single Hole Receptacle - ABCIRH09 .......................... 48 Panel Mounted Plug - ABCIRH12A .................................................... 52 Conduit Adaptor With Braid Screen Trap - Type RM (CRA) ............... 53 Non-Locking Cable Clamp - Type D (OCN) ........................................ 54 Non-Locking Grommet Nut - Type EV ................................................ 55 Locking 900 Outlet With Cable Clamp & Bushing - Type F.................. 56 Locking 900 Outlet With Sealed Cable Clamp - Type FC..................... 57 Locking 900 Outlet - Type FT .............................................................. 58 Locking 900 Outlet, RFI - Type FM ..................................................... 59 Locking Heatshrink Adaptor - Type G (HSA) ...................................... 60 Locking RFI Shielded Adaptor - Type GM (LHSA) .............................. 61 Non-Locking Heatshrink Adaptor - Type GS (HSAS) .......................... 62 Locking Armoured Conduit Adaptor - Type H (ACA) ........................... 63 Locking Cable Clamp With Bushing - Type HC .................................. 64 Locking Sealed Cable Clamp - Type HD ............................................ 65 Non-Locking Cable Clamp With Bushing - Type JE ............................ 66 Locking Screened Cable Adaptor - Type M (SCA) .............................. 67 Non-Locking Conduit Adaptor - Type R (CCA) ................................... 68 Non-Locking Sealed Cable Clamp - Type RC ..................................... 69 Long Backshell With Cable Clamp & Bushing - Type XLA................... 70 Long Backshell With Sealed Cable Clamp - Type XLC ....................... 71 Long Backshell With Grommet - Type SHE ........................................ 72 PG Threaded Adaptors (DIN 40430) .................................................. 73 Cable Clamp - Type MS3057A ........................................................... 74 Cable Clamp - Type MS3057C ........................................................... 75 Telescopic Bushing ............................................................................ 76 Panel Sealing Gaskets ....................................................................... 77 Protective Caps ................................................................................. 78 Wire Sealing Grommets ..................................................................... 79 Dummy Pins, Sockets & Grommet Filler Plugs .................................. 79 Stowage Receptacles ......................................................................... 80 Square Flange Receptacle Nut Plates ................................................ 81 Square Flange Receptacles, Panel Mounting Details ......................... 82 Single Hole Mounting Receptacles, Panel Mounting Details................ 83 Contact Insertion & Extraction Tools .................................................. 84 Socket Guide Pins ............................................................................. 84 F80 Contacts, Crimp & Tooling Data .................................................. 85 87 F80 Coax & Twinax Contacts, Crimp & Tooling Data ................... ABCIRH Connectors General Information Standard Data Materials: Coupling: 3 pin bayonet. Number of contacts: 2 to 85 Connector metalwork: Aluminium alloy Insulator, grommet & bushing: Low Fire Hazard, rubber Contact termination: Crimp or p.c. tail. Contacts: Copper alloy Sealing: Accessory hardware: Aluminium alloy Olive drab chromate over zinc cobalt or Olive drab chromate Dynamic sealing ring & individual wire seal grommet. When mated and used with appropriate sealed backshell, IP67 rated. Matings: 2000. over cadmium plate.* ABCIRH Connectors: Standard Plating Finishes: Aluminium parts: Contacts: Silver or Gold. ABCIRH connectors feature stainless steel pins at critical wear points of the cam tracks of all receptacle shells, to protect from wear inflicted by continuous mating / de-mating and vibration. * Consult factory for alternative finishes. Environmental Ratings: Temperature range: -55 C to + 200 C Shock severity: 75g Vibration: 5-500 Hz long endurance. 30 hour test at 10g. 50g. Acceleration: 0 Stainless Steel Wear Pin 0 Note. The company reserves the right and may change or vary specification without prior written notice. Mechanical Features: 2 ABCIRH Connectors Part Number Explanation ABCIR H 06 Material Variation Series Prefix F 28 Accessory Type Shell Style 21 Contact Arrangement Shell Size Series: ABCIR Material variation: H Shell style: 00 - 4 hole square flange receptacle, front panel mounted. 01 - Cable mounted receptacle. 03 - 4 hole square flange receptacle, rear panel mounted. - P C N Contact Termination Contact Type Insert Orientation - Plug. No RFI grounding. P06 - Plug, rubber covered coupling nut. No RFI grounding. SE06 - Plug with RFI grounding. 07 - Through bulkhead receptacle. 08 - Plug with 900 angled outlet. No RFI grounding SE08 - Plug with 90 angled outlet. RFI grounding. 09 - Single hole mounted receptacle. 0 4 ** Contact Style ** Contact Supply Modification Code Accessory type: See relevent catalogue pages. Shell size: 10SL to 49. Contact arrangement: See pages 5 to 17. Contact type: P pin, S socket, H pin/socket assembly for bulkhead connector style 07. Contact termination: C crimp removeable, (except for style 07 which are bonded, nonremoveable, no designation in part number). Insert orientation: N normal. WXYZ alternative insert positions. See pages 20 & 21. Contact style: F80 Modification code: Please consult factory. Contact supply: Silver plated contacts, no designation. P3 gold plated. V0 connector supplied without contacts. Low fire hazard 06 F80 F80 Contact Arrangements 2 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 10SL-4 14S-9 18-3 2 x #16S (15S) 2 x #16S (15S) 2 x #12 (25) A A D 3 Contacts A C Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating B 10SL-3 14S-7 16S-5 3 x #16S (15S) 3 x #16S (15S) 3 x #16S (15S) A A A 16-10 20-3 22-2 3 x #12 (25) 3 x #12 (25) 3 x #8 (100) A D D 3 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 500 (0) 5 F80 Contact Arrangements 4 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating D A C B 20-4 24-22 32-17 4 x #12 (25) 4 x #8 (100) 4 x #4 (160) D D D 4 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 36-5 40-E4 4 x #0 (500) 4 x #0 (500) A E 49-A4 4 x #0 (500) D 5 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 14S-5 16S-8 18-11 40-A5 5 x #16S (15S) 5 x #16S (15S) 5 x #12 (25) 5 x#0 (500) Inst. A A A 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 500 (0) 6 F80 Contact Arrangements 6 Contacts F C A D E B Contact Arrangement No. Contacts x Size AWG (Metric) 14S-6 18-12 6 # 16S (15S) 6 # 16 (15) Service Rating Inst. 28-22 3 # 16 (15), 3 # 4 (160) A D 7 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 16S-1 20-15 24-2 24-10 24-27 7 # 16S (15S) 7 # 12 (25) 7 # 12 (25) 7 # 8 (100) 7 # 16 (15) Service Rating A A D A E 8 Contacts G A B C F E Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating H D 20-7 22-18 8 x #16 (15) 8 x #16 (15) 8 x #12 (25) A,B,H,G = D, Balance = A A,B,F,G,H = D, Balance = A H = D, Balance = A Contact legend 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 500 (0) 7 22-23 F80 Contact Arrangements 9 Contacts Contact Arrangement No.Contacts x Size AWG (Metric) Service Rating 20-A9 20-16 7 x # 6 (15) 20-18 6 x #16 (15) 9 x #12 (25) 2 x #12 (25) 3 x #12 (25) J = D. Balance = Inst. A A 9 Contacts B C A E D G F H J Contact Arrangement No. Contacts x 24-11 6 x #12 (25) 28-A9 4 x #4 (160) Size AWG (Metric) 3 x #8 (100) 5 x #16 (15) Service Rating A A 10 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 18-1 18-19 10 x #16 (15) 10 x #16 (15) B,C,F,G = A. Balance = Inst. A Contact legend 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 8 500 (0) 49-10 4 x #12 (25) 6 x # 0 (500) D F80 Contact Arrangements 11 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 20-33 11 x #16 (15) A 12 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 49-A12 5 x #8 (100) 7 x #4 (160) D 13 Contacts Contact Arrangement No. contacts x Size AWG (Metric) Service Rating Contact legend 32-A13 13 x #12 (25) D 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 500 (0) 9 F80 Contact Arrangements 14 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 20-27 22-19 14 x #16 (15) 14 x #16 (15) A A 16 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 24-7 14 x #16 (15) 2 x #12 (25) A 17 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 20-29 17 x #16 (15) A 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 10 500 (0) 28-20 4 x #16 (15) 10 x #12 (25) A F80 Contact Arrangements 19 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 20-A48 22-14 24-67 19 x #16 (15) 19 x #16 (15) 19 x #12 (25) A A Inst. 20 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 28-16 20 x #16 (15) A 21 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 40-D21 20 x #12 (25) 1 x #8 (100) D 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 11 500 (0) 32-76 19 x #12 (25) A F80 Contact Arrangements 22 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 28-11 18 # 16 (15) 4 # 12 (25) Service Rating 36-A22 22 # 12 (25) A D 24 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 24-28 24 x #16 (15) Inst. 25 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 24-A25 25 x #16 (15) A 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 12 500 (0) F80 Contact Arrangements 26 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 28-12 28-13 28-12 Rotated by 1000 26 x #16 (15) 26 x #16 (15) Service Rating A A 31 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 40-A31 31 x #12 (25) Service Rating D 32 Contacts 8 1 2 4 12 5 9 13 15 19 22 6 23 16 17 20 3 10 7 14 18 24 21 27 28 25 29 26 30 11 31 32 Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 49-D32 26 x #12 (25), 2 x #8 (100) 4 x Coax D 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 13 500 (0) F80 Contact Arrangements 35 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 28-15 32-7 35 x #16 (15) 28 x #16 (15), 7 x #12 (25) 35 x #12 (25) A A,B,h & j = Inst. Balance = A D 37 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 28-21 37 # 16 (15) A 38 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 40-A38 38 # 12 (25) A 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 14 500 (0) 40-A35 F80 Contact Arrangements 39 Contacts Contact Arrangement Contacts x Size AWG (Metric) 36-54 No. 31 x #16 (15), 8 x #8 (100) Service Rating A 47 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 36-7 36-16 40 x #16 (15), 7 x #12 (25) Service Rating 36-7 Rotated by 1000 A A 36-17 36-7 Rotated by 2500 A 48 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 36-10 36-11 48 x #16 (15) Service Rating 36-10 Rotated by 1000 A Contact legend A 15/15S 25 (16/16S) (12) 100 (8) 15 160 (4) 500 (0) 36-12 36-10 Rotated by 2500 A F80 Contact Arrangements 48 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) 36-A48 48 # 16 (15) Service Rating Inst. 49 Contacts Contact Arrangement Contacts x Size AWG (Metric) 49-A49 38 x #16 (15), 4 x #12 (25) 5 x #8 (100), 2 x #4 (160) Service Rating 49-D1 44 # 16 (15) 5 # 4 (160) D D 54 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 32-22 54 x #16 (15) A 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 16 500 (0) No. F80 Contact Arrangements 55 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 32-A55 55 # 16 (15) A 60 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating 40-A60 60 # 16 (15) A 85 Contacts Contact Arrangement No. Contacts x Size AWG (Metric) Service Rating Contact legend 40-56 85 # 16 (15) A 15/15S 25 (16/16S) (12) 100 (8) 160 (4) 17 500 (0) F80 Contact Arrangements Selection Chart Contact Size AWG(Metric) & Current Rating (Derated) Amps at 850 C No. of 16/16S 12 8 4 0 Shell Cts. (15/15S) (25) (100) (160) (500) Orientation Shell Size Cont. Arr. 10SL 10SL 3 4 3 2 3x10A 2x10A N N A A 14S 14S 14S 14S 16S 16S 16S 16 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 22 22 22 22 22 24 24 24 24 24 24 24 24 24 5 6 7 9 1 5 8 10 1 3 11 12 19 3 4 7 A9 15 16 18 27 29 33 A48 2 14 18 19 23 2 7 10 11 22 27 28 67 A25 5 6 3 2 7 3 5 3 10 2 5 6 10 3 4 8 9 7 9 9 14 17 11 19 3 19 8 14 8 7 16 7 9 4 7 24 19 25 5x10A 6x10A 3x10A 2x10A 7x10A 3x10A 5x10A NX NW NWXY NWXYZ NWZ NWXYZ NXY NWXY NWXYZ NWXYZ NXY NWZ NXY NWXYZ NWXY NWXYZ NXY NWZ NWXYZ NWXYZ NWXYZ NWZ NZ NXY NWXYZ NWXYZ NWXYZ NWXYZ NWY NWZ NWXYZ NWZ NWXYZ NWXY NWZ NWXYZ NWZ NWXYZ Inst. Inst. A A A A A A *A&Inst D A A A D D *A&D *D&Inst A A A A A A Inst D A *A&D A *A&D D A A A D E Inst. A A 3x20A 10x10A 2x20A 5x20A 6x10A 10x10A 3x20A 4x20A 8x10A 7x10A 6x10A 14x10A 17x10A 11x10A 19x10A 9x20A 7x20A 2x20A 3x20A 3x42A 19x10A 8x10A 14x10A 14x10A 8x20A 7x20A 2x20A 6x20A 7x42A 3x42A 4x42A 7x10A 24x10A 19x20A 25x10A *Contact Arrangements/Service Ratings 18-1 Contacts B,C,F,G = A. Balance = Inst. 20-7 Contacts C,D,E,F = A Balance = D 22-23 Contact H = D Balance = A Service Rating 20-A9 Contact J = D Balance = Inst. 22-18 Contacts A,B,F,G,H = D Balance = A 18 F80 Contact Arrangements Selection Chart. Contact Size AWG(Metric) & Current Rating (Derated) Amps at 850 C No. of 16/16S 12 8 4 0 Shell Cts. (15/15S) (25) (60/100) (160) (500) Orientation Shell Size Cont. Arr. 28 28 28 28 28 28 28 28 28 32 32 32 32 32 32 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 49 49 49 11 12 13 15 16 20 21 22 A9 7 17 22 76 A13 A55 5 7 10 11 12 16 17 A22 A48 54 56 A5 A31 A35 A38 A60 E4 D21 A4 A10 A12 22 26 26 35 20 14 37 6 9 35 4 54 19 13 55 4 47 48 48 48 47 47 22 48 39 85 5 31 35 38 60 4 21 4 10 12 49 49 49 D32 A49 D1 32 49 49 18x10A 26x10A 26x10A 35x10A 20x10A 4x10A 37x10A 3x10A 5X10A 28x10A 4x20A NWXYZ NWXY - 5x42A 7x75A NWXYZ NWXYZ NWXYZ NWXYZ NWXYZ NWXYZ NWXYZ NWXY NWXYZ NWXYZ NWXYZ NWXYZ NXY NWXYZ NWXYZ NWXYZ NW NW NWXYZ NWZ NWXYZ NWXYZ NWXYZ NWXYZ NWX NW N N N 2x42A 5x42A 4xCoax 2xCoax 5xCoax N N N 10x20A 3x75A 4X75A 7x20A 4x75A 54x10A 19x20A 13x20A 55x10A 4x135A 40x10A 48x10A 48x10A 48x10A 40x10A 40x10A 7x20A 7x20A 7x20A 22x20A 48x10A 31x10A 85x10A 8x42A 5x135A 31x20A 35x20A 38x20A 60x10A 4x135A 20x20A 1x42A 4x135A 6x135A 4x20A 38x10A 44x10A 26x20A 4x20A *Contact Arrangements/Service Ratings 32-7 Contacts A,B,H,J = Inst Balance = A 19 Service Rating A A A A A A A D A *A&Inst D A A D A A A A A A A A D Inst A A A D D A A E D D D D D D D Alternative Insert Orientations View on Mating Face of Pin Inserts N Contact Arrangement 10SL-3 10SL-4 14S-5 14S-6 14S-7 14S-9 16S-1 16S-5 16S-8 16-10 18-1 18-3 18-11 18-12 18-19 20-3 20-4 20-7 20-A9 20-15 20-16 20-18 20-27 20-29 20-33 20-A48 22-2 22-14 22-18 22-19 22-23 24-2 24-7 24-10 24-11 24-22 24-27 24-28 24-67 24-A25 N Yellow 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 W X Y Angular Displacement Of Insert W Blue X Green Y Purple 110 90 90 180 270 70 145 215 80 70 145 215 170 265 90 180 270 70 145 215 35 110 250 170 265 80 120 240 70 145 215 45 110 250 80 110 250 110 250 80 80 110 250 35 110 250 35 110 250 80 80 280 70 145 215 80 80 110 250 80 110 250 35 250 80 80 110 250 80 35 110 250 45 110 250 80 80 110 250 80 80 110 250 20 Z Z White 290 280 290 290 325 280 290 280 280 280 325 325 280 280 290 280 280 280 280 280 280 325 280 280 335 280 Alternative Insert Orientations View on Mating Face of Pin Inserts N Contact Arrangement 28-11 28-12 28-13 28-15 28-16 28-20 28-21 28-22 28-A9 32-7 32-17 32-22 32-76 32-A13 32-A55 36-5 36-7 36-10 36-11 36-12 36-16 36-17 36-A22 36A48 36-54 40-56 40-A5 40-A31 40-A35 40-A38 40-A60 40-E4 40-D21 49-A4 49-A10 49-A12 49-D32 49-A49 49-D1 N Yellow 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 W X Y Angular Displacement Of Insert W Blue X Green Y Purple 80 110 250 90 180 270 80 110 250 80 110 250 80 110 250 80 110 250 70 145 215 110 250 260 80 125 235 45 110 250 80 110 250 80 110 250 65 130 230 80 110 250 120 240 80 110 250 80 125 235 80 110 250 65 67 72 144 216 33 80 110 250 70 130 230 37 74 285 80 110 250 45 110 80 21 Z Z White 280 280 280 280 280 290 280 280 280 280 295 280 280 280 280 288 270 280 290 322 280 - F80 Crimp Contacts Pin Metric Imperial For standard gold plating, add P3 to the end of the part number. Contact Size AWG (Metric) Part Number A B C 16S/20 ABB16S/20KPKF80 16S/18 ABB16S/18KPKF80 16S (15S) ABB16SKPKF80 16S/14 ABB16S/14KPKF80 16/22 ABB16/22KPKF80 16/20 ABB16/20KPKF80 16/18 ABB16/18KPKF80 16 (15) ABB16KPKF80 16/14 ABB1614KPKF80 16/12 ABB16/12KPKF80 12/20 ABB12/20KPKF80 12/18 ABB12/18KPKF80 12/16 (25/15) ABB12/16KPKF80 12/14 ABB12/14KPKF80 12 (25) ABB12KPKF80 12/10 ABB1210KPKF80 12/40 (25/40) ABB12/40KPKF80 8/40 (100/40) ABB8/40KPKF80 8/12 ABB8/12KPKF80 8/10 ABB8/10KPKF80 8 ABB8KPKF80 (100/60) ABB100/60KPKF80 (100) ABB100KPKF80 4/10 ABB4/10KPKF80 4 ABB4KPKF80 (160) ABB160KPKF80 0 ABB0KPKF80 (500/160) ABB500/160KPKF80 (500/250) ABB500/250KPKF80 (500/350) ABB500/350KPKF80 (500) ABB500KPKF80 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 7,80 0.307 7,80 0.307 7,80 0.307 7,80 0.307 7,80 0.307 7,80 0.307 11,00 0.433 11,00 0.433 11,00 0.433 15,00 0.591 15,00 0.591 15,00 0.591 15,00 0.591 15,00 0.591 2,65 0.104 2,30 0.091 2,75 0.108 2,90 0.114 2,30 0.091 2,65 0.104 2,30 0.091 2,75 0.108 2,90 0.114 3,80 0.150 2,65 0.104 2,30 0.091 2,75 0.108 2,90 0.114 3,80 0.150 4,40 0.173 4,00 0.157 5,20 0.205 3,80 0.150 5,20 0.205 6,80 0.268 5,50 0.217 7,00 0.276 5,20 0.205 9,55 0.376 9,45 0.372 14,35 0.565 9,45 0.372 10,00 0.394 11,90 0.468 14,35 0.565 1,10 0.043 1,25 0.049 1,75 0.069 1,80 0.071 0,90 0.035 1,10 0.043 1,25 0.049 1,75 0.069 1,80 0.071 2,50 0.098 1,10 0.043 1,25 0.049 1,75 0.069 1,80 0.071 2,50 0.098 3,00 0.118 2,70 0.106 2,90 0.114 2,50 0.098 3,30 0.130 4,55 0.179 3,40 0.134 4,40 0.173 3,30 0.130 7,10 0.280 5,70 0.224 11,50 0.453 5,70 0.224 7,00 0.276 8,00 0.315 9,80 0.386 22 Conductor CSA mm2 0,50/0,75 0,75/0,93 0,93/1,50 1,94/2,08 0,22/0,34 0,50/0,75 0,75/0,93 0,93/1,50 1,94/2,08 2,50/3,00 0,50/0,75 0,75/0,93 0,93/1,50 1,94/2,08 2,50/3,00 5,53 4,00 4,00 2,50 5,53 9,00 6,00 10,00 553 22,00 16,00 53,0 16,00 25,00 35,00 50,00 L 26,60 1.047 26,60 1.047 26,60 1.047 26,60 1.047 31,75 1.250 31,75 1.250 31,75 1.250 31,75 1.250 31,75 1,250 31,75 1.250 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 40,70 1.602 40,70 1.602 40,70 1.602 40,70 1.602 40,70 1.602 40,70 1.602 41,25 1.624 41,25 1.624 41,25 1.624 44,50 1.752 44,50 1.752 44,50 1.752 44,50 1.752 44,50 1.752 F80 Crimp Contacts Socket Metric Imperial For standard gold plating, add P3 to the end of the part number. Contact Size AWG (Metric) Part Number 16S/20 ABB16S/20KSKF80 16S/18 ABB16S/18KSKF80 16S (15S) ABB16SKSKF80 16S/14 ABB16S/14KSKF80 16/22 ABB16/22KSKF80 16/20 ABB16/20KSKF80 16/18 ABB16/18KSKF80 16 (15) ABB16KSKF80 16/14 ABB16/14KSKF80 16/12 ABB16/12KSKF80 12/20 ABB12/20KSKF80 12/18 ABB12/18KSKF80 12/16 (25/15) ABB12/16KSKF80 12/14 ABB12/14KSKF80 12 (25) ABB12KSKF80 12/10 ABB1210KSKF80 12/40 (25/40) ABB12/40KSKF80 8/40 ABB8/40KSKF80 8/12 ABB8/12KSKF80 8/10 ABB8/10KSKF80 8 ABB8KSKF80 (100/60) ABB100/60KSKF80 (100) ABB100KSKF80 4/10 ABB4/10KSKF80 4 ABB4KSKF80 (160) ABB160KSKF80 0 ABB0KSKF80 (500/160) ABB500/160KSKF80 (500/250) ABB500/250KSKF80 (500/350) ABB500/350KPKF80 (500) ABB500KPKF80 A 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 480 0.189 4,80 0.189 7,80 0.307 7,80 0.307 7,80 0.307 7,80 0.307 7,80 0.307 7,80 0.307 11,10 0.437 11,10 0.437 11,10 0.437 15,10 0.594 15,10 0.594 15,10 0.594 15,10 0.594 15,10 0.594 B 6,50 0.256 4,80 0.189 6,50 0.256 6,50 0.256 6,50 0.256 6,50 0.256 6,50 0.256 8,60 0.339 8,60 0.339 13,20 0.520 13,20 0.520 13,20 0.520 13,20 0.520 13,20 0.520 23 C D 2,65 0.104 2,30 0.091 2,75 0.108 3,90 0.114 2,30 0.091 2,65 0.104 2,30 0.091 2,75 0.108 2,90 0.114 3,80 0.150 2,65 0.104 2,30 0.091 2,75 0.108 2,90 0.114 3,80 0.150 4,40 0.173 4,00 0.157 5,20 0.204 3,80 0.150 4,40 0.173 6,80 0.268 5,50 0.217 7,00 0.276 5,20 0.205 9,55 0.376 9,45 0.372 14,35 0.565 9,45 0.372 10,00 0.394 11,90 0.469 14,35 0.565 1,10 0.049 1,25 0.069 1,75 0.069 1,80 0.071 0,90 0.035 1,10 0.049 1,25 0.049 1,75 0.07 1,80 0.071 2,50 0.098 1,10 0.049 1,25 0.049 1,75 0.069 1,80 0.071 2,50 0.098 3,00 0.118 2,70 0.106 2,90 0.114 2,50 0.098 3,00 0.118 4,55 0.179 3,40 0.134 4,40 0.173 3,30 0.130 7,10 0.280 5,70 0.224 11,50 0.453 5,70 0.224 7,00 0.276 8,00 0.315 9.80 0.386 Conductor CSA mm2 0,50/0,75 0,75/0.93 0,93/1,50 1,94/2,08 0,22/0,34 0,50/0,75 0,75/0,93 0,93/1,50 1,94/2,08 2,50/3,00 0,50/0,75 0,75/0,93 0,93/1,50 1,94/2,08 2,50/3,00 5,53 4,00 4,00 2,50/3,00 5,53 9,00 6,00 10,00 5,53 22,00 16,00 53,00 16,00 25,00 35,00 50,00 L 26,60 1.047 26,60 1..047 26,60 1.047 26,60 1.047 36,50 1.437 36,50 1.437 36,50 1.437 36,50 1.437 36,50 1.437 36,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 37,50 1.476 40,70 1.602 40,70 1.602 40,70 1.602 40,70 1.602 40,70 1.602 40,70 1.602 41,25 1.624 41,25 1.624 41,25 1.624 44,50 1.752 44,50 1.752 44,50 1.752 44,50 1.752 44,50 1.752 F80 Crimp Contacts Low Insertion Force Socket Metric Imperial Standard Finish = gold plated. Contact Size AWG (Metric) Part Number A B C Conductor CSA mm2 L 16S (15S) ABB16SKLKF80P3 3,20 0.126 2,75 0.108 1,75 0.069 1,00/1,50 26,60 1.047 16/20 ABB16/20KLKF80P3 3,20 0.126 2,65 0.104 1,10 0.043 0,50/0,75 36,50 1.437 16 (15) ABB16KLKF80P3 3,20 0.126 2,75 0.108 1,75 0.069 1,00/1,50 36,50 1.437 12/20 ABB12/20KLKF80P3 4,80 0.189 2,65 0.104 1,10 0.043 0,50/0,75 37,50 1.476 12/16 (25/15) ABB12/16KLKF80P3 4,80 0.189 2,75 0.108 1,75 0.069 1,00/1,50 37,50 1.476 12 (25) ABB12KLKF80P3 4,80 0.189 3,80 0.150 2,50 0.098 2,50/3,00 37,50 1.476 24 F80 Crimp Contacts Coaxial Pin & Socket Pin Contact Metric Imperial * Important Note. Consult factory for suitable contact arrangement details Contact Size AWG * Part Number 4 ABB 4 CKPK F80 P1 001 4 ABB 4 CKPK F80 P1 002 A B C D L 11,10 0.437 11,10 0.437 9,80 0.386 9,80 0.386 5,20 0.205 7,50 0.295 1,07 0.042 1,75 0.069 44,70 1.760 44,70 1.760 Use With Conductors 0.5 mm2 1.0 mm2 Socket Contact Metric Imperial * Important Note. Consult factory for suitable contact arrangement details Contact Size AWG * Part Number 4 ABB 4 CKSK F80 P1 001 4 ABB 4 CKSK F80 P1 002 A B C D L 11,10 0.437 11,10 0.437 9,80 0.386 9,80 0.386 5,20 0.205 7,50 0.295 1,07 0.042 1,75 0.069 43,05 1.695 43,05 1.695 25 Use With Conductors 0.5 mm2 1.0 mm2 F80 Crimp Contacts Twinaxial Pin & Socket Pin Contact Metric Imperial * Important Note. Consult factory for suitable contact arrangement details Contact Size AWG * Part Number 4 ABB 4 TKPK F80 P1 4 ABB 4 TKPK F80 P1 001 A B C D E L Use With Conductors 11,10 0.437 11,10 0.437 9,80 0.386 9,80 0.386 6,00 0.236 6,50 0.256 1,07 0.042 1,30 0.051 1,05 0.041 1,30 0.051 44,70 1.760 44,70 1.760 0.5 mm2 0.6 mm2 0.75 mm2 1.0 mm2 Socket Contact Metric Imperial * Important Note. Consult factory for suitable contact arrangement details Contact Size AWG* Part Number 4 ABB 4 TKSK F80 P1 4 ABB 4 TKSK F80 P1 001 A B C D E L Use With Conductors 11,10 0.437 11,10 0.437 9,80 0.386 9,80 0.386 6,00 0.236 6,50 0.256 1,07 0.042 1,30 0.051 1,05 0.041 1,30 0.051 43,05 1.695 43,05 1.695 0.5 mm2 0.6 mm2 0.75 mm2 1.0 mm2 26 Square Flange Receptacle Front Mounting (No Accessory Thread) Style: ABCIRH00A/ABCIRH00A...M6 See page 82 for panel mounting details Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 B Max C Max d1 +0,2 -0 +0.008-0 d2 Thread E Max M Max H Max Om Min Overlap Mated 17,60 0.693 18,00 0.709 18,00 0.709 22,80 0.898 23,60 0.929 23,60 0.929 23,60 0.929 25,20 0.992 25,20 0.992 26,80 1.055 26,80 1.055 26,80 1.055 25,70 1.012 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.764 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,70 0.146 3,70 0.146 4,30 0.169 4,30 0.169 4,30 0.169 M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M5 0,8-6H M5 0,8-6H M5 0,8-6H M5 0,8-6H 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 16,10 0.634 19,20 0.756 22,40 0.882 22,40 0.882 25,60 1.008 29,00 1.142 31,90 1.256 35,00 1.378 41,40 1.630 47,80 1.882 52,60 2.071 59,00 2.323 25,00 0.98 25,00 0.98 25,00 0.98 32,85 1.293 32,85 1.293 32,85 1.293 32,85 1.293 32,85 1.293 32,85 1.293 32,85 1.293 32,85 1.293 32,85 1.293 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 27 Square Flange Receptacle Front Mounting (With Accessory Thread) Style: ABCIRH00T/ABCIRH00T...M6 See page 82 for panel mounting details Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 B Max C Max 17,60 0.693 18,00 0.709 18,00 0.709 22,80 0.898 23,60 0.929 23,60 0.929 23,60 0.929 25,20 0.992 25,20 0.992 26,80 1.055 26,80 1.055 26,80 1.055 25,70 1.012 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.764 d1 +0,2 -0 d2 +0.008-0 Thread 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,70 0.146 3,70 0.146 4,30 0.169 4,30 0.169 4,30 0.169 M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M5 0,8-6H M5 0,8-6H M5 0,8-6H M5 0,8-6H F Thread Dia. Class 2A E Max 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 28 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN H Max P Om Min Overlap Mated 28,78 1.133 28,78 1.133 28,78 1.133 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 ABCIRH `00' Style Connector & Accessory Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 A B C D E F G H 109,00 4.291 107,00 4.213 104,00 4.094 111,00 4.370 115,00 4.528 114,00 4.488 114,00 4.488 109,00 4.291 119,00 4.685 115,00 4.528 112,00 4.409 44,00 1.732 44,00 1.732 44,00 1.732 54,00 2.126 54,00 2.126 54,00 2.126 54,00 2.126 54,00 2.126 54,00 2.126 54,00 2.126 54,00 2.126 54,00 2.126 57,00 2.244 61,00 2.402 64,00 2.520 71,00 2.795 76,00 2.992 81,00 3.189 81,00 2.189 89,00 3.504 88,00 3.465 98,00 3.858 104,00 4.094 111,00 4.370 58,00 2.283 60,00 2.362 64,00 2.520 71,00 2.795 76,00 2.992 82,00 3.228 82,00 3.228 89,00 3.504 89,00 3.504 101,00 3.976 105,00 4.134 112,00 4.409 54,00 2.126 56,00 2.205 60,00 2.362 67,00 2.638 72,00 2.835 77,00 3.031 77,00 3.031 85,00 3.346 85,00 3.346 95,00 3.740 101,00 3.976 107,00 4.213 54,00 2.126 56,00 2.205 60,00 2.362 67,00 2.638 72,00 2.835 77,00 3.031 77,00 3.031 85,00 3.346 85,00 3.346 95,00 3.740 101,00 3.976 107,00 4.213 49,00 1.929 49,00 1.929 49,00 1.929 57,00 2.244 59,00 2.323 60,00 2.362 63,00 2.480 60,00 2.362 63,00 2.480 61,00 2.402 67,00 2.638 68,00 2.677 53,00 2.087 53,00 2.087 53,00 2.087 65,00 2.559 65,00 2.559 68,00 2.677 68,00 2.677 68,00 2.677 67,00 2.638 67,00 2.638 68,00 2.677 68,00 2.677 N/A * Please consult factory for availability. 29 J * * * * 74,00 2.913 80,00 3.150 80,00 3.150 80,00 3.150 81,00 3.189 80,00 3.189 80,00 3.189 80,00 3.189 ABCIRH `00' Style Connector & Accessory cont. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 K L M N P R S T U 50,00 1.696 50,00 1.969 50,00 1.969 57,00 2.244 59,00 2.323 59,00 2.323 59,00 2.323 59,00 2.323 59,00 2.323 58,00 2.283 58,00 2.283 58,00 2.283 122,00 4.803 118,00 4.646 120,00 4.724 123,00 4.843 124,00 4.882 120,00 4.724 120,00 4.724 107,00 4.213 107,00 4.213 106,00 4.173 106,00 4.173 103,00 4.055 81,00 3.189 81,00 3.189 81,00 3.189 88,00 3.465 92,00 3.622 92,00 3.622 92,00 3.622 95,00 3.740 95,00 3.740 100,00 3.937 107,00 4.213 107,00 4.213 121,00 4.764 118,00 4.646 115,00 4.528 124,00 4.882 126,00 4.961 123,00 4.843 123,00 4.843 123,00 4.843 124,00 4.882 120,00 4.724 117,00 4.606 114,00 4.488 53,00 2.087 56,00 2.205 56,00 2.205 63,00 2.480 66,00 2.598 66,00 2.598 66,00 2.598 66,00 2.598 65,00 2.559 65,00 2.559 65,00 2.559 65,00 2.559 51,00 2.008 51,00 2.008 51,00 2.008 60,00 2.362 66,00 2.598 66,00 2.598 66,00 2.598 69,00 2.716 70,00 2.756 69,00 2.716 69,00 2.716 70,00 2.756 82,00 3.228 82,00 3.228 82,00 3.228 91,00 3.583 99,00 3.898 99,00 3.898 99,00 3.898 105,00 4.134 106,00 4.173 111,00 4.370 117,00 4.606 112,00 4.409 140,00 5.512 137,00 5.394 134,00 5.276 152,00 5.984 148,00 5.827 145,00 5.709 145,00 5.709 142,00 5.591 149,00 5.866 146,00 5.748 143,00 5.630 140,00 5.512 101,00 3.976 101,00 3.976 101,00 3.976 121,00 4.764 121,00 4.764 121,00 4.764 121,00 4.764 124,00 4.882 131,00 5.157 137,00 5.394 144,00 5.669 144,00 5.669 30 Cable Mounted Receptacle Style: ABCIRH01T Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 B Max C Max D Max E Max 17,60 0.693 18,00 0.709 18,00 0.709 22,80 0.898 23,60 0.929 23,60 0.929 23,60 0.929 25,20 0.992 25,20 0.992 26,80 1.055 26,80 1.055 26,80 1.055 25,20 0.992 29,80 1.173 32,30 1.272 32,30 1.272 34,80 1.370 37,80 1.488 41,10 1.618 44,60 1.756 50,90 2.004 57,10 2.248 63,80 2.512 70,00 2.756 20,80 0.819 25,60 1.008 28,80 1.134 28,80 1.134 31,90 1.256 35,10 1.382 38,30 1.508 41,50 1.634 47,80 1.882 54,20 2.134 60,80 2.394 66,70 2.626 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 31 F Thread Dia. Class 2A 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN H Max Om Min Overlap Mated 28,78 1.133 28,78 1.133 28,78 1.133 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 36,30 1.429 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 ABCIRH `01' Style Connector & Accessory Metric Imperial Shell Size A G 44,00 49,00 1.732 1.929 44,00 49,00 14S 1.732 1.929 44,00 49,00 16S 1.732 1.929 54,00 57,00 16 2.126 2.244 54,00 59,00 18 2.126 2.323 54,00 60,00 20 2.126 2.362 54,00 63,00 22 2.126 2.480 54,00 60,00 24 2.126 2.362 54,00 63,00 28 2.126 2.480 54,00 61,00 32 2.126 2.402 54,00 67,00 36 2.126 2.638 54,00 68,00 N/A 40 2.126 2.677 * Please consult factory for availability. 10SL 109,00 4.291 107,00 4.213 104,00 4.094 111,00 4.370 115,00 4.528 114,00 4.488 114,00 4.488 109,00 4.291 119,00 4.685 115,00 4.528 112,00 4.409 B H J 53,00 2.087 53,00 2.087 53,00 2.087 65,00 2.559 65,00 2.559 68,00 2.677 68,00 2.677 68,00 2.677 67,00 2.638 67,00 2.638 68,00 2.677 68,00 2.677 * * * * 74,00 2.913 80,00 3.150 80,00 3.150 80,00 3.150 81,00 3.189 80,00 3.189 80,00 3.189 80,00 3.189 32 K L M N 50,00 1.696 50,00 1.969 50,00 1.969 57,00 2.244 59,00 2.323 59,00 2.323 59,00 2.323 59,00 2.323 59,00 2.323 58,00 2.283 58,00 2.283 58,00 2.283 122,00 4.803 118,00 4.646 120,00 4.724 123,00 4.843 124,00 4.882 120,00 4.724 120,00 4.724 107,00 4.213 107,00 4.213 106,00 4.173 106,00 4.173 103,00 4.055 81,00 3.189 81,00 3.189 81,00 3.189 88,00 3.465 92,00 3.622 92,00 3.622 92,00 3.622 95,00 3.740 95,00 3.740 100,00 3.937 107,00 4.213 107,00 4.213 121,00 4.764 118,00 4.646 115,00 4.528 124,00 4.882 126,00 4.961 123,00 4.843 123,00 4.843 123,00 4.843 124,00 4.882 120,00 4.724 117,00 4.606 114,00 4.488 ABCIRH `01' Style Connector & Accessory cont. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 P R S T U 53,00 2.087 56,00 2.205 56,00 2.205 63,00 2.480 66,00 2.598 66,00 2.598 66,00 2.598 66,00 2.598 65,00 2.559 65,00 2.559 65,00 2.559 65,00 2.559 51,00 2.008 51,00 2.008 51,00 2.008 60,00 2.362 66,00 2.598 66,00 2.598 66,00 2.598 69,00 2.716 70,00 2.756 69,00 2.716 69,00 2.716 70,00 2.756 82,00 3.228 82,00 3.228 82,00 3.228 91,00 3.583 99,00 3.898 99,00 3.898 99,00 3.898 105,00 4.134 106,00 4.173 111,00 4.370 117,00 4.606 112,00 4.409 140,00 5.512 137,00 5.394 134,00 5.276 152,00 5.984 148,00 5.827 145,00 5.709 145,00 5.709 142,00 5.591 149,00 5.866 146,00 5.748 143,00 5.630 140,00 5.512 101,00 3.976 101,00 3.976 101,00 3.976 121,00 4.764 121,00 4.764 121,00 4.764 121,00 4.764 124,00 4.882 131,00 5.157 137,00 5.394 144,00 5.669 144,00 5.669 33 Square Flange Receptacle Rear Mounting (No Accessory Thread) Style: ABCIRH03A/ABCIRH03A...M6 Note. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Maximum panel thickness when using cap head screws. When using countersunk screws, maximum panel thickness = 7.5 mm. See page 82 for panel mounting details. B Max C Max d1 +0,2 -0 +0.008-0 d2 Thread E Max M Max H Max P See Note Om Min Overlap Mated 18,60 0.732 18,60 0.732 18,60 0.732 21,90 0.862 23,45 0.923 23,45 0.923 23,45 0.923 23,45 0.923 24,45 0.963 24,45 0.963 24,45 0.963 24,45 0.963 25,70 1.012 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.764 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,70 0.146 3,70 0.146 4,30 0.169 4,30 0.169 4,30 0.169 M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M4 0,7-6H M5 0,8-6H M5 0,8-6H M5 0,8-6H M5 0,8-6H 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 16,10 0.634 19,20 0.756 22,40 0.882 22,40 0.882 25,60 1.008 29,00 1.142 31,90 1.250 35,00 1.380 41,40 1.630 47,80 1.882 52,60 2.071 59,00 2.323 25,00 0.99 25,00 0.99 25,00 0.99 32,70 1.28 32,70 1.28 33,40 1.32 33,40 1.32 32,75 1.29 35,80 1.41 36,80 1.45 36,80 1.45 36,80 1.45 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 34 Square Flange Receptacle Rear Mounting (With Accessory Thread) AB Style: ABCIRH03T/ABCIRH03T...M6 Note. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Maximum panel thickness when using cap head screws. When using countersunk screws, maximum panel thickness = 7.5 mm. See page 82 for panel mounting details. B Max C Max d1 +0,2 -0 +0.008-0 d2 Thread E Max 18,60 0.732 18,60 0.732 18,60 0.732 21,90 0.862 23,45 0.923 23,45 0.923 23,45 0.923 23,45 0.923 24,45 0.963 24,45 0.963 24,45 0.963 24,45 0.963 25,70 1.012 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.764 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,70 0.146 3,70 0.146 4,30 0.169 4,30 0.169 4,30 0.169 M4 0.7-6H M4 0.7-6H M4 0.7-6H M4 0.7-6H M4 0.7-6H M4 0.7-6H M4 0.7-6H M4 0.7-6H M5 0.8-6H M5 0.8-6H M5 0.8-6H M5 0.8-6H 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 35 F Thread Dia. Class 2A 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN H Max 30,0 1.19 30,0 1.19 30,0 1.19 37,0 1.46 37,0 1.46 37,0 1.46 37,0 1.46 37,0 1.46 37,0 1.46 37,0 1.46 37,0 1.46 38,0 1.50 Om Min P Overlap See Note Mated 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 ABCIRH `03' Style Connector & Accessory Metric Imperial Shell Size A C 44,00 58,00 1.732 2.283 44,00 61,00 14S 1.732 2.402 44,00 65,00 16S 1.732 2.559 60,00 77,00 16 2.362 3.031 60,00 82,00 18 2.362 3.228 60,00 87,00 20 2.362 3.425 60,00 87,00 22 2.362 3.425 60,00 95,00 24 2.362 3.740 60,00 94,00 28 2.362 3.700 60,00 104,00 32 2.362 4.094 60,00 110,00 36 2.362 4.331 60,00 117,00 NA 40 2.362 4.606 * Please consult factory for availability. 10SL 109,00 4.291 108,00 4.252 105,00 4.134 117,00 4.606 121,00 4.764 120,00 4.724 120,00 4.724 114,00 4.488 124,00 4.882 121,00 4.764 118,00 4.646 B D E F G H 58,00 2.283 61,00 2.402 65,00 2.559 77,00 3.031 82,00 3.228 88,00 3.465 88,00 3.465 95,00 3.740 94,00 3.700 107,00 4.213 111,00 4.370 117,00 4.606 55,00 2.165 57,00 2.244 61,00 2.402 73,00 2.874 78,00 3.071 83,00 3.268 83,00 3.268 91,00 3.583 90,00 3.543 100,00 3.937 106,00 4.173 113,00 4.449 55,00 2.165 57,00 2.244 61,00 2.402 73,00 2.874 78,00 3.071 83,00 3.268 83,00 3.268 91,00 3.583 90,00 3.543 100,00 3.937 106,00 4.173 113,00 4.449 50,00 1.968 50,00 1.968 50,00 1.968 63,00 2.480 65,00 2.559 66,00 2.598 68,00 2.677 66,00 2.598 68,00 2.677 67,00 2.638 72,00 2.835 74,00 2.913 54,00 2.126 54,00 2.126 54,00 2.126 70,00 2.756 70,00 2.756 74,00 2.913 74,00 2.913 74,00 2.913 73,00 2.874 73,00 2.874 74,00 2.913 74,00 2.913 36 J * * * * 80,00 3.150 86,00 3.386 86,00 3.386 86,00 3.386 87,00 3.425 86,00 3.386 88,00 3.465 88,00 3.465 ABCIRH `03' Style Connector & Accessory cont. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 K L M N P R S T U 50,00 1.969 50,00 1.969 50,00 1.969 63,00 2.480 65,00 2.559 65,00 2.559 65,00 2.559 65,00 2.559 65,00 2.559 64,00 2.520 64,00 2.520 64,00 2.520 123,00 4.843 119,00 4.685 121,00 4.764 129,00 5.079 130,00 5.118 126,00 4.961 126,00 4.961 113,00 4.449 113,00 4.449 112,00 4.409 112,00 4.409 109,00 4.291 81,00 3.189 81,00 3.189 81,00 3.189 94,00 3.700 97,00 3.819 97,00 3.819 97,00 3.819 101,00 3.976 101,00 3.976 106,00 4.173 112,00 4.409 112,00 4.409 122,00 4.803 118,00 4.646 115,00 4.528 129,00 5.079 132,00 5.197 129,00 5.079 129,00 5.079 129,00 5.079 130,00 5.118 125,00 4.921 122,00 4.803 120,00 4.724 54,00 2.126 56,00 2.205 56,00 2.205 69,00 2.716 72,00 2.835 72,00 2.835 72,00 2.835 72,00 2.835 71,00 2.795 71,00 2.795 71,00 2.795 71,00 2.795 52,00 2.047 52,00 2.047 52,00 2.047 66,00 2.598 72,00 2.835 72,00 2.835 72,00 2.835 75,00 2.593 76,00 2.992 75,00 2.593 75,00 2.593 76,00 2.992 83,00 3.268 83,00 3.268 83,00 3.268 97,00 3.819 104,00 4.094 104,00 4.094 104,00 4.094 110,00 4.331 111,00 4.370 117,00 4.606 123,00 4.842 118,00 4.646 141,00 5.551 138,00 5.433 135,00 5.315 157,00 6.181 154,00 6.063 151,00 5.945 151,00 5.945 148,00 5.827 155,00 6.102 152,00 5.984 148,00 5.827 145,00 5.709 102,00 4.016 102,00 4.016 102,00 4.016 126,00 4.961 126,00 4.961 126,00 4.961 126,00 4.961 130,00 5.118 137,00 5.394 143,00 5.630 149,00 5.866 149,00 5.866 37 Size 49 Square Flange Front Mounting Receptacle No Accessory or With Grommet & Grommet Nut AB Styles: ABCIRH04T or ABCIRH04EV Metric Imperial Shell Size 49 B C D1 +0,2 -0 +0.008-0 E F Thread Dia. Class 2A G Dia. H X 56,50 2.224 110,00 4.330 8,50 0.335 8,00 0.315 27/8" x 16 UN 90,00 3.543 62,50 2.460 90,00 3.543 Metric Imperial Shell Size 49 See page 82 for panel mounting details ABCIRH04T See page 82 for panel mounting details ABCIRH04EV B C D1 +0,2 -0 +0.008-0 E G Dia. H X 56,50 2.224 110,00 4.330 8,50 0.335 8,00 0.315 90,00 3.543 81,50 3.209 90,00 3.543 38 Size 49 Square Flange Rear Mounting Receptacle No Accessory or With Grommet & Grommet Nut AB Styles: ABCIRH05T or ABCIRH05EV Metric Imperial Shell Size 49 B C D1 +0,2 -0 +0.008-0 E F Thread Dia. Class 2A G Dia. H P X 56,50 2.224 110,00 4.330 8,50 0.335 8,00 0.315 27/8" x 16 UN 90,00 3.543 62,50 2.460 15,00 0.590 90,00 3.543 Metric Imperial Shell Size 49 See page 82 for panel mounting details ABCIRH05T See page 82 for panel mounting details ABCIRH05EV B C D1 +0,2 -0 +0.008-0 E G Dia. H P X 56,50 2.224 110,00 4.330 8,50 0.335 8,00 0.315 90,00 3.543 81,50 3.209 15,00 0.590 90,00 3.543 39 Plug - Fine Knurl Coupling Nut Style: ABCIRH06T/ABCIRHSE06T ABCIRHSE06T with Screening Facility Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 C Max E Max 24,20 0.953 30,60 1.205 33,40 1.315 33,40 1.315 37,30 1.468 40,70 1.602 44,20 1.740 47,70 1.878 54,50 2.146 61,40 2.417 68,00 2.677 74,00 2.913 17,50 0.689 17,50 0.689 17,50 0.689 24,00 0.945 24,00 0.945 24,00 0.945 24,00 0.945 24,00 0.945 24,00 0.945 27,00 1.063 27,00 1.063 27,00 1.063 F Thread Dia. Class 2A 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN 40 H Max Om Min Overlap Mated 28,95 1.140 28,95 1.140 28,95 1.140 36,40 1.433 36,40 1.433 36,40 1.433 36,40 1.433 36,40 1.433 36,40 1.433 36,40 1.433 36,40 1.433 36,40 1.433 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 ABCIRH `06' Style Connector & Accessory Metric Imperial Shell Size A C 44,00 57,00 1.732 2.244 44,00 61,00 14S 1.732 2.402 44,00 64,00 16S 1.732 2.520 54,00 71,00 16 2.126 2.795 54,00 76,00 18 2.126 2.992 54,00 81,00 20 2.126 3.190 54,00 81,00 22 2.126 3.190 54,00 89,00 24 2.126 3.504 54,00 88,00 28 2.126 3.465 54,00 98,00 32 2.126 3.858 54,00 104,00 36 2.126 4.094 54,00 111,00 N/A 40 2.126 4.370 * Please consult factory for availability. 10SL 109,00 4.291 107,00 4.213 104,00 4.094 111,00 4.370 115,00 4.528 114,00 4.488 114,00 4.488 109,00 4.291 119,00 4.685 116,00 4.567 112,00 4.409 B D E F G H 58,00 2.283 60,00 2.362 64,00 2.520 71,00 2.795 76,00 2.992 82,00 3.228 119,00 4.685 90,00 3.543 89,00 3.504 101,00 3.976 105,00 4.134 112,00 4.409 54,00 2.126 56,00 2.205 60,00 2.362 68,00 2.677 72,00 2.835 77,00 3.031 78,00 3.071 86,00 3.386 85,00 3.346 95,00 3.740 101,00 3.976 107,00 4.213 54,00 2.126 57,00 2.244 60,00 2.362 68,00 2.677 72,00 2.835 78,00 3.071 78,00 3.071 86,00 3.386 85,00 3.346 95,00 3.740 101,00 3.976 107,00 4.213 50,00 1.969 50,00 1.969 50,00 1.969 57,00 2.244 59,00 2.323 60,00 2.362 63,00 2.480 60,00 2.362 63,00 2.480 62,00 2.441 67,00 2.638 68,00 2.677 54,00 2.126 54,00 2.126 54,00 2.126 65,00 2.559 65,00 2.559 68,00 2.677 68,00 2.677 68,00 2.677 67,00 2.638 67,00 2.638 68,00 2.677 68,00 2.677 41 J * * * * 74,00 2.913 80,00 3.150 80,00 3.150 80,00 3.150 81,00 3.189 80,00 3.150 80,00 3.150 80,00 3.150 ABCIRH `06' Style Connector & Accessory cont. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 K L M N P R S T U 50,00 1.969 50,00 1.969 50,00 1.969 57,00 2.244 59,00 2.323 59,00 2.323 59,00 2.323 59,00 2.323 59,00 2.323 58,00 2.283 58,00 2.283 58,00 2.283 122,00 4.803 119,00 4.685 120,00 4.724 123,00 4.843 124,00 4.882 120,00 4.724 120,00 4.724 107,00 4.213 107,00 4.213 106,00 4.173 106,00 4.173 103,00 4.055 81,00 3.189 81,00 3.189 81,00 3.189 88,00 3.465 92,00 3.622 92,00 3.622 92,00 3.622 95,00 3.740 95,00 3.740 100,00 3.937 107,00 4.213 107,00 4.213 121,00 4.764 118,00 4.646 115,00 4.528 124,00 4.882 127,00 5.000 123,00 4.843 123,00 4.843 123,00 4.843 124,00 4.882 120,00 4.724 117,00 4.606 114,00 4.488 53,00 2.087 56,00 2.205 56,00 2.205 63,00 2.480 66,00 2.598 66,00 2.598 66,00 2.598 66,00 2.598 65,00 2.559 65,00 2.559 65,00 2.559 65,00 2.559 51,00 2.008 51,00 2.008 51,00 2.008 60,00 2.362 66,00 2.598 66,00 2.598 66,00 2.598 69,00 2.717 70,00 2.756 69,00 2.717 69,00 2.717 70,00 2.756 82,00 3.228 82,00 3.228 82,00 3.228 91,00 3.583 99,00 3.898 99,00 3.898 99,00 3.898 105,00 4.134 106,00 4.173 111,00 4.370 117,00 4.606 112,00 4.409 140,00 5.512 137,00 5.394 134,00 5.276 152,00 5.984 149,00 5.866 145,00 5.709 145,00 5.709 142,00 5.591 149,00 5.866 146,00 5.748 143,00 5.630 140,00 5.512 101,00 3.976 101,00 3.976 101,00 3.976 121,00 4.764 121,00 4.764 121,00 4.764 121,00 4.764 124,00 4.882 131,00 5.157 137,00 5.394 144,00 5.669 144,00 5.669 42 Plug Rubber Covered Coupling Nut Style: ABCIRHP06T Metric Imperial Shell Size *10SL *14S *16S *16 18 20 22 24 *28 *32 36 40 B Max C Max E Max 33,50 1.319 40,20 1.583 43,88 1.726 43,88 1.726 49,00 1.929 51,50 2.026 56,00 2.205 60,00 2.362 67,00 2.638 76,00 2.992 82,30 3.240 88,00 3.465 28,50 1.122 35,20 1.386 38,90 1.531 38,90 1.531 43,50 1.713 46,00 1.811 50,50 1.988 54,00 2.126 61,00 2.402 67,60 2.661 74,30 2.925 80,00 3.150 19,40 0.764 19,40 0.764 19,40 0.764 27,10 1.067 27,10 1.067 27,10 1.067 27,10 1.067 27,10 1.067 27,10 1.067 27,10 1.067 27,10 1.067 27,10 1.067 F Thread Dia. Class 2A 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN * Please consult factory for availability. 43 H Max Om Min Overlap Mated 29,55 1.163 29,55 1.163 29,55 1.163 37,07 1.459 37,07 1.459 37,07 1.459 37,07 1.459 37,07 1.459 37,07 1.459 37,07 1.459 37,07 1.459 37,07 1.459 13,10 0.516 13,10 0.516 13,10 0.516 17,85 0.703 17,85 0.703 17,85 0.703 17,85 0.703 17,75 0.669 17,75 0.669 17,75 0.669 17,75 0.669 17,75 0.669 ABCIRH `P06' Style Connector & Accessory Metric Imperial Shell Size A 44,00 1.732 44,00 *14S 1.732 44,00 *16S 1.732 55,00 *16 2.165 55,00 18 2.165 55,00 20 2.165 55,00 22 2.165 55,00 24 2.165 55,00 *28 2.165 55,00 *32 2.165 55,00 36 2.165 55,00 NA 40 2.165 * Please consult factory for availability. *10SL 109,00 4.291 108,00 4.252 105,00 4.134 112,00 4.409 116,00 4.567 115,00 4.528 115,00 4.528 109,00 4.291 119,00 4.685 116,00 4.567 113,00 4.449 B C D E F G 58,00 2.283 61,00 2.402 65,00 2.559 72,00 2.835 77,00 3.031 82,00 3.228 82,00 3.228 90,00 3.543 89,00 3.504 99,00 3.898 105,00 4.134 112,00 4.409 58,00 2.283 61,00 2.402 65,00 2.559 72,00 2.835 77,00 3.031 83,00 3.268 83,00 3.268 90,00 3.543 89,00 3.504 102,00 4.016 106,00 4.173 112,00 4.409 55,00 2.165 57,00 2.244 61,00 2.402 68,00 2.677 73,00 2.874 78,00 3.071 78,00 3.071 86,00 3.386 85,00 3.346 95,00 3.740 101,00 3.976 108,00 4.252 55,00 2.165 57,00 2.244 61,00 2.402 68,00 2.677 73,00 2.874 78,00 3.071 78,00 3.071 86,00 3.386 85,00 3.346 95,00 3.740 101,00 3.976 108,00 4.252 50,00 1.969 50,00 1.969 50,00 1.969 58,00 2.283 60,00 2.362 61,00 2.402 64,00 2.520 61,00 2.402 64,00 2.520 62,00 2.441 67,00 2.638 69,00 2.717 44 J * * * * 75,00 2.953 81,00 3.189 81,00 3.189 81,00 3.189 82,00 3.228 81,00 3.189 81,00 3.189 81,00 3.189 ABCIRH `P06' Style Connector & Accessory cont. Metric Imperial * Please consult factory for availability. Shell Size *10SL *14S *16S *16 18 20 22 24 *28 *32 36 40 K L M N R S T U 51,00 2.008 51,00 2.008 51,00 2.008 58,00 2.283 60,00 2.362 60,00 2.362 60,00 2.362 60,00 2.362 60,00 2.362 59,00 2.323 59,00 2.323 59,00 2.323 123,00 4.843 119,00 4.685 121,00 4.764 124,00 4.882 125,00 4.921 121,00 4.764 121,00 4.764 108,00 4.252 108,00 4.252 107,00 4.213 107,00 4.213 104,00 4.094 81,00 3.189 81,00 3.189 81,00 3.189 89,00 3.504 93,00 3.661 93,00 3.661 93,00 3.661 96,00 3.780 96,00 3.780 101,00 3.976 107,00 4.213 107,00 4.213 122,00 4.803 119,00 4.685 115,00 4.528 124,00 4.882 127,00 5.000 124,00 4.882 124,00 4.882 124,00 4.882 125,00 4.921 121,00 4.764 117,00 4.606 116,00 4.567 52,00 2.047 52,00 2.047 52,00 2.047 61,00 2.402 67,00 2.638 67,00 2.638 67,00 2.638 70,00 2.756 71,00 2.795 70,00 2.756 70,00 2.756 71,00 2.795 83,00 3.268 83,00 3.268 83,00 3.268 92,00 3.622 99,00 3.898 99,00 3.898 99,00 3.898 106,00 4.173 106,00 4.173 112,00 4.409 118,00 4.646 113,00 4.449 140,00 5.512 138,00 5.433 135,00 5.315 152,00 5.984 149,00 5.866 146,00 5.748 146,00 5.748 143,00 5.630 150,00 5.906 147,00 5.787 144,00 5.669 140,00 5.512 102,00 4.016 102,00 4.016 102,00 4.016 121,00 4.764 121,00 4.764 121,00 4.764 121,00 4.764 125,00 4.921 132,00 5.197 138,00 5.433 144,00 5.669 144,00 5.669 45 ABCIRH Shell Size 49. Plug With Conduit Adaptor Rubber Covered Coupling Nut Style: ABCIRHP06GGL or GGS............ Metric Imperial Connector Style ABCIRHP06GGL....... ABCIRHP06GGS........ A Dia. Max. 43,50 1.713 29,00 1.142 46 B Thread 21/4" x 16 UN-2A 13/4" x 18 UNEF-2A Through Bulkhead Receptacle Style: ABCIRH07/ABCIRH07...M6 Pin Side Note. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Socket Side Maximum panel thickness when using cap head screws. When using countersunk screws, maximum panel thickness = 7.5 mm. See page 82 for panel mounting details. A Max B Max C Max d1 +0,2 -0 +0.008-0 38,20 1.504 38,20 1.504 38,20 1.504 52,10 2.051 52,10 2.051 52,10 2.051 52,10 2.051 52,10 2.051 52,10 2.051 52,10 2.051 52,10 2.051 52,10 2.051 17,60 0.693 18,00 0.709 18,00 0.709 22,80 0.898 23,60 0.929 23,60 0.929 23,60 0.929 25,20 0.992 25,20 0.992 26,80 1.055 26,80 1.055 26,80 1.055 25,70 1.012 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.764 3,20 0.126 3,20 0.126 3,20 0.123 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,70 0.146 3,70 0.146 4,30 0.169 4,30 0.169 4,30 0.169 47 d2 Thread M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 E Max P See Note Om Min Overlap Mated 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 3,30 0.130 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 Single Hole Mounting Receptacle Rear Mounted (No Accessory Thread) Style: ABCIRH09A Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 See page 83 for panel mounting details B 24,50 0.965 26,80 1.055 26,80 1.055 32,10 1.264 33,70 1.327 33,70 1.327 33,70 1.327 33,70 1.327 35,20 1.386 35,20 1.386 35,20 1.386 35,20 1.386 C 4,00 0.157 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 5,60 0.220 5,60 0.220 5,60 0.220 5,60 0.220 D Max E 32,05 1.262 41,55 1.636 44,65 1.758 44,65 1.758 47,85 1.884 51,05 2.034 54,45 2.144 57,45 2.262 63,75 2.510 70,05 2.758 76,45 3.010 83,75 3.297 27,00 1.063 33,00 1.299 38,10 1.500 38,10 1.500 39,70 1.563 44,00 1.732 46,00 1.811 50,80 2.000 55,00 2.165 62,00 2.441 71,00 2.795 75,00 2.953 G P Min 48 11,20 0.441 14,60 0.575 15,70 0.618 15,70 0.618 16,80 0.661 18,00 0.709 20,20 0.795 20,20 0.795 22,50 0.886 24,70 0.972 26,90 1.059 29,60 1.165 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 Max 5,20 0.205 7,50 0.295 7,50 0.295 7,50 0.295 9,00 0.354 9,00 0.354 9,10 0.358 9,10 0.358 8,50 0.335 8,50 0.335 8,30 0.327 8,30 0.327 Om Min Overlap Mated 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 Single Hole Mounting Receptacle Rear Mounted (With Accessory Thread) Style: ABCIRH09T Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 See page 83 for panel mounting details A Max B 36,45 1.435 39,15 1.541 39,15 1.541 48,75 1.919 49,55 1.951 49,55 1.951 49,55 1.951 49,55 1.951 52,15 2.053 52,15 2.053 52,15 2.053 52,15 2.053 24,50 0.965 26,80 1.055 26,80 1.055 32,10 1.264 33,70 1.327 33,70 1.327 33,70 1.327 33,70 1.327 35,20 1.386 35,20 1.386 35,20 1.386 35,20 1.386 C 4,00 0.157 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 4,80 0.189 5,60 0.220 5,60 0.220 5,60 0.220 5,60 0.220 D Max E 32,05 1.262 41,55 1.636 44,65 1.758 44,65 1.758 47,85 1.884 51,05 2.034 54,45 2.144 57,45 2.262 63,75 2.510 70,05 2.758 76,45 3.010 83,75 3.297 27,00 1.063 33,00 1.299 38,10 1.500 38,10 1.500 39,70 1.563 44,00 1.732 46,00 1.811 50,80 2.000 55,00 2.165 62,00 2.441 71,00 2.795 75,00 2.953 F Thread Dia. Class 2A 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN 49 Min Max Om Min Overlap Mated 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 2,40 0.094 5,20 0.205 7,50 0.295 7,50 0.295 7,50 0.295 9,00 0.354 9,00 0.354 9,10 0.358 9,10 0.358 8,50 0.335 8,50 0.335 8,30 0.327 8,30 0.327 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 G 11,20 0.441 14,60 0.575 15,70 0.618 15,70 0.618 16,80 0.661 18,00 0.709 20,20 0.795 20,20 0.795 22,50 0.886 24,70 0.972 26,90 1.059 29,60 1.165 P ABCIRH `09' Style Connector & Accessory Metric Imperial Shell Size A B ++C ++D ++E 51,00 65,00 65,00 61,00 61,00 2.008 2.560 2.560 2.402 2.402 54,00 70,00 71,00 67,00 67,00 14S 2.126 2.756 2.795 2.638 2.638 54,00 72,00 74,00 70,00 70,00 16S 2.126 2.835 2.913 2.756 2.756 67,00 84,00 83,00 78,00 80,00 16 3.071 2.638 3.307 3.268 3.150 68,00 89,00 89,00 85,00 85,00 18 2.677 3.504 3.504 3.346 3.346 68,00 94,00 95,00 91,00 91,00 20 2.677 3.700 3.740 3.583 3.583 68,00 94,00 96,00 91,00 91,00 22 2.677 3.700 3.780 3.583 3.583 68,00 102,00 103,00 99,00 99,00 24 2.677 4.016 4.055 3.898 3.898 70,00 104,00 105,00 101,00 101,00 28 2.756 4.094 4.134 3.976 3.976 70,00 114,00 117,00 111,00 111,00 32 2.756 4.488 4.606 4.370 4.370 70,00 120,00 121,00 117,00 117,00 36 2.756 4.724 4.764 4.606 4.606 70.00 127,00 128,00 123,00 123,00 NA 40 2.756 5.000 5.039 4.843 4.843 * Please consult factory for availability. ++ For connector with locking accessory, 10SL 116,00 4.567 117,00 4.606 114,00 4.488 124,00 4.882 128,00 5.040 127,00 5.000 127,00 5.000 122,00 4.803 135,00 5.315 131,00 5.157 128,00 5.040 ++F 50 ++G ++H J 57,00 61,00 * 2.244 2.402 60,00 64,00 * 2.362 2.520 60,00 64,00 * 2.362 2.520 69,00 77,00 * 2.717 3.031 72,00 78,00 88,00 2.835 3.071 3.465 73,00 82,00 93,00 2.875 3.228 3.661 76,00 82,00 94,00 2.992 3.228 3.700 73,00 82,00 94,00 2.875 3.228 3.700 79,00 83,00 97,00 3.110 3.268 3.700 77,00 83,00 96,00 3.031 3.268 3.780 83,00 84,00 96,00 3.268 3.307 3.780 84,00 84,00 96,00 3.307 3.307 3.780 please refer to the Sales office. ABCIRH `09' Style Connector & Accessory cont. Metric Imperial Shell Size ++K ++L ++M N ++P R 57,00 130,00 88,00 130,00 61,00 59,00 2.244 5.118 3.465 5.118 2.402 2.323 60,00 129,00 91,00 128,00 66,00 61,00 14S 2.362 5.079 3.583 5.039 2.598 2.402 60,00 131,00 91,00 125,00 66,00 61,00 16S 2.362 5.157 3.583 4.921 2.598 2.402 72,00 135,00 101,00 136,00 76,00 72,00 16 2.835 5.315 3.976 5.354 2.992 2.835 73,00 138,00 105,00 140,00 80,00 79,00 18 2.875 5.433 4.134 5.512 3.150 3.110 73,00 133,00 105,00 137,00 80,00 79,00 20 2.875 5.236 4.134 5.394 3.150 3.110 73,00 133,00 105,00 137,00 80,00 79,00 22 2.875 5.236 4.134 5.394 3.150 3.110 73,00 120,00 108,00 137,00 80,00 79,00 24 2.875 4.724 4.252 5.394 3.150 3.110 75,00 123,00 112,00 140,00 81,00 86,00 28 2.953 4.843 4.409 5.512 3.189 3.386 74,00 122,00 116,00 136,00 81,00 85,00 32 2.913 4.803 4.567 5.354 3.189 3.346 74,00 122,00 122,00 133,00 81,00 85,00 36 2.913 4.803 4.803 5.236 3.189 3.346 74,00 119,00 123,00 131,00 81,00 86,00 40 2.913 4.685 4.843 5.157 3.189 3.386 ++ For connector with locking accessory, please refer to the Sales office. 10SL 51 S ++T ++U 90,00 3.543 92,00 3.622 92,00 3.622 103,00 4.055 112,00 4.409 112,00 4.409 112,00 4.409 112,00 4.409 121,00 4.764 127,00 5.000 133,00 5.236 128,00 5.039 148,00 5.827 147,00 5.787 144,00 5.669 134,00 5.276 162,00 6.378 159,00 6.260 159,00 6.260 159,00 6.260 165,00 6.496 162,00 6.378 159,00 6.260 155,00 6.102 109,00 4.291 112,00 4.409 112,00 4.409 133,00 5.236 134,00 5.276 134,00 5.276 134,00 5.276 134,00 5.276 147,00 5.787 153,00 6.024 159,00 6.260 159,00 6.260 Panel Mounted Plug (No Accessory Thread) Style: ABCIRH12A/ABCIRH12A...M6 Metric Imperial See page 82 for panel mounting details Shell Size A Max. C Max. d1 +0.2, -0 mm d2 Thread E Max. H Max. 0m Min. Overlap, mated 10SL 24,20 0.953 25,70 1.012 3.20 0.126 M4 3,00 0.118 28,10 1.106 11,10 0.437 30,60 1.205 33,40 1.315 33,40 1.315 37,30 1.469 40,70 1.602 44,20 1.740 47,70 1.878 54,50 2.146 61,40 2.417 68,00 2.677 74,00 2.913 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.764 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 4,30 0.169 4,30 0.169 4,30 0.169 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 28,10 1.106 28,10 1.106 37,60 1.480 38,60 1.519 38,60 1.519 38,60 1.519 41,00 1.614 41,80 1.646 45,00 1.772 45,00 1.772 45,00 1.772 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 14S 16S 16 18 20 22 24 28 32 36 40 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 52 Conduit Adaptor With Braid Screen Trap - No Grommet Accessory Type `RM' Style: ABB - ** - CRA How to order: Metric Imperial ABB - ** - CRA Note. This accessory can only be used in conjunctionwith style `CCA', `H' or `FT' adaptor. * Shell size Shell Size F Thread Dia. Class 2B F1 Thread Dia. Class 2A G Max N Max S Min T Max M Max *10SL - - - - - - - 10,00 0.394 10,00 0.394 11,00 0.433 11,00 0.433 11,00 O.433 11,00 0.433 11,00 0.433 11,00 0.433 13,00 0.512 13,00 0.512 13,00 0.512 27,60 1.087 27,60 1.087 30,60 1.205 30,60 1.205 30,60 1.205 30,60 1.205 30,60 1.205 30,60 1.205 30,60 1.205 30,60 1.205 30,60 1.205 8,51 0.335 9,74 0.383 9,74 0.383 12,90 0.508 18,23 0.718 18,23 0.718 25,93 1.021 25,93 1.021 25,93 1.021 32,00 1.260 32,33 1.273 21,53 0.848 25,50 1.004 25,50 1.004 29,10 1.146 35,45 1.396 35,45 1.396 43,60 1.717 43,60 1.717 49,55 1.951 55,90 2.201 63,10 2.484 11,71 0.461 13,10 0.516 13,10 0.516 16,26 0.640 21,51 0.847 21,51 0.847 29,21 1.150 29,21 1.150 29,10 1.146 35,19 1.385 35,60 1.402 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 1" x 20 UNEF 16 7 /8" x 20 UNEF 1" x 20 UNEF 18 1" x 20 UNEF 13/16" x 18 UNEF 20 13/16" x 18 UNEF 17/16'' x 18 UNEF 22 13/16" x 18 UNEF 17/16'' x 18 UNEF 24 17/16" x 18 UNEF 13/4'' x 18 UNS 28 17/16" x 18 UNEF 13/4'' x 18 UNS 32 13/4" x 18 UNS 13/4'' x 18 UNS 36 2" x 18 UNS 2'' x 18 UNS 40 21/4" x 16 UN 21/4'' x 16 UN 7 /8" x 20 UNEF Please consult factory for availability. 53 Non-Locking Cable Clamp With Grommet & Follower Accessory Type `D' Style: ABBH - ** - ** - OCN - F80 How to order: ABBH - ** - ** - OCN - F80 Shell size Metric Imperial Contact arrangement F Thread Dia. Class 2B Shell Size 10SL 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 18 1" x 20 UNEF 20 11/8" x 18 UNEF 22 11/4" x 18 UNEF 24 13/8" x 18 UNEF 28 15/8" x 18 UNEF 32 17/8" x 16 UN 36 21/16" x 16 UNS N1 Max N2 Max S Min/Max T Max Oa Min Overlap Accessory 36,42 1.434 27,41 1.079 27,41 1.079 27,41 1.079 44,68 1.759 44,68 1.759 44,68 1.759 44,68 1.759 54,79 2.157 54,79 2.157 54,79 2.157 86,68 3.413 85,04 3.348 81,99 3.228 81,99 3.228 85,55 3.368 84,61 3.331 84,61 3.331 79,20 3.118 89,31 3.516 86,13 3.390 82,98 3.267 3,68/5,76 0.145/0.227 4,62/8,10 0.182/0.319 7,82/11,30 0.308/0.444 7,82/11,30 0.308/0.444 8,79/14,45 0.346/0.569 10,54/16,00 0.415/0.632 10,54/16,00 0.415/0.632 14,55/19,23 0.573/0.757 14,15/19,23 0.557/0.757 19,18/23,98 0.755/0.944 24,51/31,93 0.965/1.257 35,15 1.384 39,88 1.570 41,45 1.632 41,45 1.632 45,52 1.792 49,63 1.954 49,63 1.954 56,29 2.216 60,45 2.380 68,43 2.694 71,68 2.822 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 54 Non-Locking Grommet Nut With Grommet & Follower Accessory Type `EV' Style: ABBH - ** - ** - EV - F80 How to order: ABBH - ** - ** - EV - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement F Thread Dia. Class 2B T Max 21,60 0.850 24,80 0.976 28,70 1.130 28,70 1.130 31,90 1.256 34,90 1.374 38,20 1.504 41,40 1.630 47,80 1.882 54,10 2.130 58,70 2.311 63.00 2.480 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN 55 N Max S Min Oa Min Overlap Accessory 20,83 0.820 20,83 0.820 20,83 0.820 25,53 1.005 25,53 1.005 25,53 1.005 25,53 1.005 25,53 1.005 25,53 1.005 25,53 1.005 25,53 1.005 25,64 1.009 8,60 0.339 11,10 0.437 14,30 0.563 14,30 0.563 16,70 0.657 19,80 0.780 21,34 0.840 25,40 1.000 30,13 1.186 36,73 1.446 41,00 1.614 45,90 1.807 6,10 0.240 6,10 0.240 6,10 0.240 7,60 0.300 7,60 0.300 7,60 0.300 7,60 0.300 7,60 0.300 7,60 0.300 7,60 0.300 7,60 0.300 7,60 0.300 Locking 900 Outlet With Cable Clamp & Grommet Accessory Type `F' Style: ABBH - ** - ** - F - F80 How to order: ABBH - ** - ** - F - F80 Metric Imperial Shell size Contact arrangement Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 B Max C Max C1 Max 24,00 0.945 25,00 0.984 27,00 1.063 27,00 1.063 30,10 1.224 33,00 1.299 33,10 1.303 37,90 1.492 37,10 1.461 43,10 1.697 45,90 1.807 49,00 1.929 30,00 1.181 30,00 1.181 30,00 1.181 30,00 1.181 35,00 1.378 35,00 1.378 35,00 1.378 40,00 1.575 40,00 1.575 45,00 1.772 50,00 1.969 54,60 2.150 100,00 3.937 100,00 3.937 100,00 3.937 100,00 3.937 100,00 3.937 100,00 3.937 100,00 3.937 100,00 3.937 100,00 3.937 110,00 4.331 110,00 4.331 100,00 3.937 F Thread Dia. Class 2B 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN 56 N Max T Max T1 Max S Max Oa Min Overlap Accessory 42,00 1.654 42,00 1.654 45,00 1.772 45,00 1.772 53,00 2.087 53,00 2.087 53,00 2.087 58,00 2.283 58,00 2.283 66,00 2.598 69,00 2.717 85,50 3.366 22,00 0.866 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.890 54,00 2.126 61,00 2.402 67,00 2.638 22,70 0.894 27,50 1.083 30,00 1.181 30,00 1.181 33,00 1.299 37,50 1.476 37,50 1.476 43,30 1.705 43,30 1.705 51,70 2.035 58,00 2.283 65,00 2.559 5,76 0.227 8,10 0.319 11,30 0.444 11,30 0.444 14,45 0.569 16,00 0.632 16,00 0.632 19,23 0.757 19,23 0.757 23,98 0.944 31,93 1.257 35,10 1.382 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 Locking 900 Outlet, Sealed Cable Clamp & Grommet Accessory Type `FC' Style: ABBH - ** - ** - FC - F80 How to order: ABBH - ** - ** - FC - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement F Thread Dia. Class 2B B Max C Max D Max 24,00 0.945 25,00 0.984 27,00 1.063 27,00 1.063 30,10 1.224 33,00 1.299 33,10 1.303 37,90 1.492 37,10 1.461 43,10 1.697 45,90 1.807 49,00 1.929 23,80 0.937 26,97 1.062 30,18 1.188 30,18 1.188 33,32 1.312 39,67 1.562 39,67 1.562 44,45 1.750 44,45 1.750 57,15 2.250 60,33 2.375 66,68 2.625 61,00 2.402 61,00 2.402 61,00 2.402 61,00 2.402 68,00 2.677 68,00 2.677 68,00 2.677 76,00 2.992 76,00 2.992 87,00 3.425 98,00 3.858 103,00 4.055 57 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN T Max Oa Min Overlap Accessory 22,00 0.866 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.890 54,00 2.126 61,00 2.402 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 Locking 900 Outlet With Grommet Accessory Type `FT' Style: ABBH - ** - ** - FT - F80 How to order: ABBH - ** - ** - FT - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement B Max C Max 24,00 0.945 25,00 0.984 27,00 1.063 27,00 1.063 30,10 1.224 33,00 1.299 33,10 1.303 37,90 1.492 37,10 1.461 43,10 1.697 45,90 1.807 49,00 1.929 30,00 1.181 30,00 1.181 30,00 1.181 30,00 1.181 35,00 1.378 35,00 1.378 35,00 1.378 40,00 1.575 40,00 1.575 45,00 1.772 50,00 1.969 54,60 2.150 F Thread Dia. Class 2B F1 Thread Dia. Class 2A 5 /8" x 24 UNEF 5 /8'' x 24 UNEF 3 /4" x 20 UNEF 3 /4'' x 20 UNEF 7 /8" x 20 UNEF 7 /8'' x 20 UNEF 7 /8" x 20 UNEF 7 /8'' x 20 UNEF 1" x 20 UNEF 1'' x 20 UNEF 11/8" x 18 UNEF 13/16'' x 18 UNEF 11/4" x 18 UNEF 13/16'' x 18 UNEF 13/8" x 18 UNEF 17/16'' x 18 NEF 15/8" x 18 UNEF 17/16'' x 18 NEF 17/8" x 16 UN 13/4'' x 18 UNS 21/16" x 16 UNS 2'' x 18 UNS 25/16" x 16 UN 21/4'' x 16 UN 58 T Max Oa Min Overlap Accessory 22,00 0.866 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.890 54,00 2.126 61,00 2.402 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 Locking 900 Outlet RFI Shielded With Grommet Accessory Type `FM' Style: ABBH - ** - ** - FM - F80 How to order: ABBH - ** - ** - FM - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement A Max B Max C Max D Max 15,90 0.626 19,10 0.764 22,30 0.878 22,30 0.878 25,50 1.004 30,20 1.189 30,20 1.189 36,60 1.441 36,60 1.441 44,50 1.752 50,90 2.004 57,20 2.252 24,00 0.945 25,00 0.984 27,00 1.063 27,00 1.063 30,10 1.224 33,00 1.299 33,10 1.303 37,90 1.492 37,10 1.461 43,10 1.697 45,90 1.807 49,00 1.929 30,00 1.181 30,00 1.181 30,00 1.181 30,00 1.181 35,00 1.378 35,00 1.378 35,00 1.378 40,00 1.575 40,00 1.575 45,00 1.772 50,00 1.969 54,60 2.150 7,77 0.306 10,36 0.408 13,01 0.512 13,01 0.512 15,14 0.596 18,10 0.713 21,62 0.851 25,10 0.988 30,38 1.196 36,48 1.436 40,67 1.601 48,50 1.909 59 F Thread Dia. Class 2B 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN T Max Oa Min Overlap Accessory 22,00 0.866 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.890 54,00 2.126 61,00 2.402 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 Locking Heatshrink Adaptor With Grommet Accessory Type `G' Style: ABBH - ** - ** - HSA - F80 How to order: ABBH - ** - ** - HSA - F80 Shell size Metric Imperial Contact arrangement F Thread Dia. Class 2B Shell Size 10SL 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 18 1" x 20 UNEF 20 11/8" x 18 UNEF 22 11/4" x 18 UNEF 24 13/8" x 18 UNEF 28 15/8" x 18 UNEF 32 17/8" x 16 UN 36 21/16" x 16 UNS 40 25/16" x 16 UN G Max M Max N Max S Min T Max Oa Min Overlap Accessory 8,20 0.323 8,20 0.323 8,20 0.323 8,00 0.315 8,00 0.315 9,20 0.362 9,20 0.362 9,20 0.362 9,20 0.362 11,70 0.461 11,70 0.461 12,10 0.476 15,70 0.618 19,30 0.760 24,10 0.949 24,10 0.949 24,10 0.949 29,80 1.173 29,80 1.173 38,00 1.496 38,00 1.496 48,00 1.890 48,00 1.890 57,95 2.281 28.46 1.120 28.46 1.120 28.46 1.120 32.26 1.270 32.26 1.270 35.80 1.409 35.80 1.409 35.80 1.409 35.76 1.408 38.26 1.506 39.26 1.546 38.30 1.508 7,70 0.303 10.60 0.417 13,50 0.532 13,50 0.532 14,60 0.575 18,70 0.736 20,80 0.819 24,60 0.969 27,00 1.063 33,30 1.311 38,50 1.516 48,10 1.894 22,00 0.87 25,00 0.99 28,00 1.11 28,00 1.11 31,00 1.22 35,00 1.38 38,00 1.50 41,00 1.62 48,00 1.89 54,00 2.13 61,00 2.40 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 60 Locking RFI Shielded Adaptor With Grommet Accessory Type `GM' Style: ABBH - ** - ** - LHSA - F80 How to order: ABBH - ** - ** - LHSA - F80 Shell size Metric Imperial Contact arrangement F Thread Dia. Class 2B Shell Size 10SL 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 18 1" x 20 UNEF 20 11/8" x 18 UNEF 22 11/4" x 18 UNEF 24 13/8" x 18 UNEF 28 15/8" x 18 UNEF 32 17/8" x 16 UN 36 21/16" x 16 UNS 40 25/16" x 16 UN G Max M Max N Max S Min T Max Oa Min Overlap Accessory 12,40 0.488 12,40 0.488 12,40 0.488 12,40 0.488 12,40 0.488 12,40 0.488 12,40 0.488 12,40 0.488 12,40 0.488 12,10 0.476 12,10 0.476 12,10 0.476 15,70 0.618 19,30 0.760 24,10 0.949 24,10 0.949 24,10 0.949 29,80 1.173 29,80 1.173 38,00 1.496 38,00 1.496 48,00 1.890 48,00 1.890 57,95 2.281 32.26 1.270 32.26 1.270 32.26 1.270 36.06 1.420 36.06 1.420 38.60 1.520 38.60 1.520 38.60 1.520 38.56 1.518 38.26 1.506 39.26 1.546 38.30 1.508 8,60 0.339 11,10 0.437 14,30 0.563 14,30 0.563 16,70 0.657 19,80 0.780 21,34 0.840 25,40 1.000 30,13 1.186 36,73 1.446 41,00 1.614 48,10 1.894 22,00 0.87 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.22 35,00 1.38 38,00 1.50 41,00 1.62 48,00 1.89 54,00 2.13 61,00 2.40 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 61 Non-Locking Heatshrink Adaptor, Grommet & Follower Accessory Type `GS' Style: ABBH - ** - ** - HSAS - F80 How to order: ABBH - ** - ** - HSAS - F80 Shell size Metric Imperial Contact arrangement Shell Size F Thread Dia. Class 2B M Max G Max N Max S Min T Max Oa Min Overlap Accessory *10SL - - - - - - - *14S - - - - - - - *16S - - - - - - - *16 - - - - - - - 11,90 0.469 11,90 0.469 11,90 0.469 11,90 0.469 11,90 0.469 11,90 0.469 11,90 0.469 11,90 0.469 45,30 1.783 51,10 2.012 51,10 2.012 51,10 2.012 51,10 2.012 51,10 2.012 51,10 2.012 51,10 2.012 14,70 0.579 18,70 0.736 20,90 0.823 24,70 0.972 27,10 1.067 33,40 1.315 38,60 1.520 48,10 1.894 28,60 1.126 31,85 1.254 35,03 1.379 39,10 1.539 45,60 1.795 50,80 2.000 57,45 2.262 63,10 2.484 7,34 0.289 7,34 0.289 7,14 0.281 7,14 0.281 6,34 0.250 7,40 0.291 7,40 0.291 7,40 0.291 24,10 0.949 29,80 11/8" x18 UNEF 20 1.173 29,80 11/4" x 18 UNEF 22 1.173 38,00 13/8" x 18 UNEF 24 1.496 38,00 15/8" x 18 UNEF 28 1.496 48,00 7 1 /8" x 16 UN 32 1.890 48,00 21/16" x 16 UNS 36 1.890 57,95 25/16" x 16 UN 40 2.281 *Please consult factory for availability. 18 1" x 20 UNEF 62 Locking Armoured Conduit Adaptor With Grommet Accessory Type `H' Style: ABBH - ** - ** - ACA - F80 How to order: ABBH - ** - ** - ACA - F80 Shell size Metric Imperial Contact arrangement F Thread Dia. Class 2B Shell Size F1 Thread Dia. Class 2A 10SL 5 /8" x 24 UNEF 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 7 /8" x 20 UNEF 18 1" x 20 UNEF 1" x 20 UNEF 20 11/8" x18 UNEF 13/16'' x 18 NEF 22 11/4" x 18 UNEF 13/16'' x 18 NEF 24 13/8" x 18 UNEF 17/16'' x 18 NEF 28 15/8" x 18 UNEF 17/16'' x 18 NEF 32 17/8" x 16 UN 13/4'' x 18 NS 36 21/16" x 16 UNS 2'' x 18 NS 40 25/16" x 16 UN 21/4'' x 16 UN G Max N Max S Min T Max Oa Min Overlap Accessory 9,50 0.374 9,50 0.374 9,50 0.374 9,50 0.374 9,50 0.374 9,50 0.374 9,50 0.374 9,50 0.374 9,50 0.374 11,00 0.433 11,80 0.464 11,80 0.464 27,90 1.098 27,90 1.098 27,90 1.098 27,90 1.098 29,90 1.177 29,90 1.177 29,90 1.177 29,90 1.177 30,00 1.181 28,90 1.138 28,90 1.138 28,90 1.138 8,20 0.323 11,10 0.437 14,30 0.563 14,30 0.563 16,70 0.657 19,80 0.780 19,80 0.780 25,40 1.000 27,00 1.063 32,50 1.280 35,70 1.406 45,00 1.772 22,00 0.87 25,00 0.99 28,00 1.11 28,00 1.11 31,00 1.22 35,00 1.38 38,00 1.50 41,00 1.62 48,00 1.89 54,00 2.13 61,00 2.40 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 63 Locking Cable Clamp With Grommet Accessory Type `HC' Style: ABBH - ** - ** - HC - F80 How to order: ABBH - ** - ** - HC - F80 Note. Clamp & bush are available separately. See pages 74 & 76 respectively. Metric Imperial F Thread Dia. Class 2B Shell Size 10SL 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 18 1" x 20 UNEF 20 11/8" x 18 UNEF 22 11/4" x 18 UNEF 24 13/8" x 18 UNEF 28 15/8" x 18 UNEF 32 17/8" x 16 UN 36 21/16" x 16 UNS 40 25/16" x 16 UN Shell size Contact arrangement N1 Max N2 Max S T Max Oa Min Overlap Accessory 40,10 1.58 41,70 1.65 43,50 1.72 43,50 1.72 50,00 1.97 45,50 1.80 45,50 1.80 47,50 1.87 47,60 1.88 46,50 1.83 46,40 1.826 59,80 2.35 100,10 3.94 96,70 3.81 98,50 3.88 93,50 3.68 95,00 3.74 90,50 3.57 90,50 3.57 77,50 3.05 77,60 3.06 76,50 3.02 76,40 3.01 73,80 2.90 5.59 0.220 7.92 0.312 11.10 0.437 11.10 0.437 14.27 0.562 15.88 0.625 15.88 0.625 19.05 0.750 19.05 0.750 23.80 0.937 31.75 1.250 34.92 1.375 22,70 0.90 27,50 1.09 30,00 1.19 30,00 1.19 33,00 1.30 37,50 1.48 37,50 1.48 43,30 1.71 43,30 1.71 51,70 2.04 58,00 2.29 65,00 2.56 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 64 Locking Sealed Cable Clamp With Grommet Accessory Type `HD' Style: ABBH - ** - ** - HD - F80 How to order: ABBH - ** - ** - HD - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement A Max B 58,87 2.318 58,87 2.318 58,87 2.318 58,87 2.318 62,44 2.458 62,44 2.458 62,44 2.458 65,61 2.583 65,71 2.587 70,96 2.794 77,31 3.044 77,31 3.044 23,80 0.937 26,97 1.062 30,18 1.188 30,18 1.188 33,32 1.312 39,21 1.562 39,21 1.562 44,45 1.750 44,45 1.750 57,15 2.250 60,33 2.375 66,68 2.625 F Thread Dia. Class 2B C Max Min 7,93 0.312 11,12 0.438 13,48 0.531 13,48 0.531 15,87 0.625 19,00 0.748 19,00 0.748 23,80 0.937 23,80 0.937 31,75 1.250 35,00 1.378 41,25 1.624 2,38 0.094 6,35 0.250 7,92 0.312 7,92 0.312 9,53 0.375 12,70 0.500 12,70 0.500 15,09 0.594 15,09 0.594 23,83 0.938 24,61 0.969 30,18 1.188 65 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN T Max Oa Min Overlap Accessory 22,00 0.866 25,00 0.984 28,00 0.984 28,00 0.984 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.890 54,00 2.126 61,00 2.402 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 Non-Locking Cable Clamp With Grommet & Follower Accessory Type `JE' Style: ABBH - ** - ** - JE - F80 How to order: ABBH - ** - ** - JE - F80 Shell size Metric Imperial Contact arrangement F Thread dia. Class 2B Shell Size 10SL 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 18 1" x 20 UNEF 20 11/8" x18 UNEF 22 11/4" x 18 UNEF 24 13/8" x 18 UNEF 28 15/8" x 18 UNEF 32 17/8" x 16 UN 36 21/16" x 16 UNS 40 25/16" x 16 UN L Max S T Max Oa Min Overlap Accessory 99,13 3.903 95,96 3.778 92,78 6.653 94,28 3.712 97,51 3.839 94,33 3.714 94,33 3.714 94,01 3.701 94,01 3.701 90,83 3.576 87,67 3.452 84,43 3.324 5.59 0.220 7.92 0.312 11.10 0.437 11.10 0.437 14.27 0.562 15.88 0.625 15.88 0.625 19.05 0.750 19.05 0.750 23.80 0.937 31.75 1.250 34.92 1.375 19,10 0.752 22,10 0.870 25,50 1.004 25,50 1.004 28,60 1.126 31,85 1.254 35,03 1.379 39,10 1.539 45,60 1.795 50,80 2.000 57,45 2.262 63,10 2.484 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,34 0.289 7,34 0.289 7,34 0.289 7,14 0.281 6,34 0.250 7,40 0.291 7,40 0.291 6,34 0.250 66 Locking Screened Cable Adaptor With Grommet Accessory Type `M' Style: ABBH - ** - ** - SCA - F80 How to order: ABBH - ** - ** - SCA - F80 Shell size Metric Imperial Contact arrangement F Thread Dia. Class 2B Shell Size 10SL 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 18 1" x 20 UNEF 20 11/8" x 18 UNEF 22 11/4" x 18 UNEF 24 13/8" x 18 UNEF 28 15/8" x 18 UNEF 32 17/8" x 16 UN 36 21/16" x 16 UNS 40 25/16" x 16 UN M Max N Max S Min T Max Oa Min Overlap Accessory 19,00 0.748 22,50 0.886 25,50 1.004 25,50 1.004 25,50 1.004 32,50 1.280 34,50 1.358 38,50 1.516 41,50 1.634 48,50 1.910 55,50 2.185 62,50 2.461 31,30 0.812 33,90 1.335 33,90 1.335 33,90 1.335 36,90 1.453 36,90 1.453 36,90 1.453 36,90 1.453 35,90 1.413 35,90 1.413 35,90 1.413 35,90 1.413 8,60 0.339 10,60 0.417 13,50 0.532 13,50 0.532 14,60 0.575 18,50 0.728 20,80 0.819 24,60 0.969 27,00 1.063 33,30 1.311 38,50 1.516 45,00 1.772 22,00 0.87 25,00 0.99 28,00 1.11 28,00 1.11 31,00 1.22 35,00 1.38 38,00 1.50 41,00 1.62 48,00 1.89 54,00 2.13 61,00 2.40 67,00 2.638 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 67 Non-Locking Conduit Adaptor, Grommet & Follower Accessory Type `R' Style: ABBH - ** - ** - CCA - F80 How to order: ABBH - ** - ** - CCA - F80 Shell size Metric Imperial Contact arrangement F Thread Dia. Class 2B Shell Size F1 Thread Dia. Class 2A 10SL 5 /8" x 24 UNEF 5 /8" x 24 UNEF 14S 3 /4" x 20 UNEF 3 /4" x 20 UNEF 16S 7 /8" x 20 UNEF 7 /8" x 20 UNEF 16 7 /8" x 20 UNEF 7 /8" x 20 UNEF 18 1" x 20 UNEF 1" x 20 UNEF 20 11/8" x18 UNEF 13/16'' x 18 UNEF 22 11/4" x 18 UNEF 13/16'' x 18 UNEF 24 13/8" x 18 UNEF 17/16'' x 18 UNEF 28 15/8" x 18 UNEF 17/16'' x 18 UNEF 32 17/8" x 16 UN 13/4'' x 18 UNS 36 21/16" x 16 UNS 2'' x 18 UNS 40 25/16" x 16 UN 21/4'' x 16 UN G Max N Max S Min T Max Oa Min Overlap Accessory 10,10 0.398 10,10 0.398 10,10 0.398 10,10 0.398 10,10 0.398 10,10 0.398 10,10 0.398 11,10 0.437 11,10 0.437 11,10 0.437 11,10 0.437 11,10 0.437 29,10 1.146 29,10 1.146 29,10 1.146 30,60 1.205 37,00 1.457 37,00 1.457 37,00 1.457 39,85 1.569 39,85 1.569 39,85 1.569 39,85 1.569 39,85 1.569 8,80 0.346 11,30 0.445 18,54 0.730 18,54 0.730 16,70 0.657 19,80 0.780 19,80 0.780 25,40 1.000 30,13 1.186 32,50 1.280 35,70 1.406 45,00 1.772 19,10 0.752 22,10 0.870 25,50 1.004 25,50 1.004 28,60 1.126 31,85 1.254 35,03 1.379 39,10 1.539 45,60 1.795 50,80 2.000 57,45 2.262 63,10 2.484 7.00 0.276 7.00 0.276 7.00 0.276 7.00 0.276 7,34 0.289 7,34 0.289 7,34 0.289 7,14 0.281 6,34 0.250 7,40 0.291 7,40 0.291 6,34 0.250 68 Non-Locking Sealed Cable Clamp, Grommet & Follower Accessory Type `RC' Style: ABBH -** - ** - RC - F80 How to order: ABBH - ** - ** - RC - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement A Max B 59,10 2.327 59,10 2.327 59,10 2.327 60,60 2.386 70,00 2.756 70,00 2.756 70,00 2.756 75,85 2.986 75,85 2.986 81,85 3.222 88,85 3.498 88,85 3.498 23,80 0.937 26,97 1.062 30,18 1.188 30,18 1.188 33,32 1.312 39,21 1.562 39,21 1.562 44,45 1.750 44,45 1.750 57,15 2.250 60,33 2.375 66,68 2.625 F Thread Dia. Class 2B C Max Min 7,93 0.312 11,12 0.438 13,48 0.531 13,48 0.531 15,87 0.625 19,00 0.748 19,00 0.748 23,80 0.937 23,80 0.937 31,75 1.250 35,00 1.378 41,25 1.624 2,38 0.094 6,35 0.250 7,92 0.312 7,92 0.312 9,53 0.375 12,70 0.500 12,70 0.500 15,09 0.594 15,09 0.594 23,83 0.938 24,61 0.969 30,18 1.188 69 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN T Max Oa Min Overlap Accessory 19,10 0.752 22,10 0.870 25,50 1.004 25,50 1.004 28,60 1.126 31,85 1.254 35,03 1.379 39,10 1.539 45,60 1.795 50,80 2.000 57,45 2.262 63,10 2.484 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,34 0.289 7,34 0.289 7,34 0.289 7,14 0.281 6.34 0.250 7,40 0.291 7,40 0.291 6.34 0.250 Long Backshell, Grommet, Cable Clamp & Bushing Accessory Type `XLA' Style: ABBH - ** - ** - XLA - F80 How to order: ABBH - ** - ** - XLA - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement F Thread Dia. Class 2B C 5,59 0.220 7,92 0.312 11,10 0.437 11,10 0.437 14,27 0.562 15,88 0.625 15,88 0.625 19,05 0.750 19,05 0.750 23,80 0.937 31,75 1.250 34,92 1.375 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN N T Max T1 Max Oa Min Overlap Accessory 118,35 4.659 115,18 4.535 112,00 4.409 122,30 4.815 119,13 4.690 115,95 4.565 115,95 4.565 112,78 4.440 119,78 4.716 116,60 4.591 113,43 4.466 110,20 4.338 22,00 0.866 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.889 54,00 2.126 61,00 2.402 67,00 2.638 22,70 0.894 27,50 1.083 30,00 1.181 30,00 1.181 33,00 1.299 37,50 1.476 37,50 1.476 43,30 1.704 43,30 1.704 51,70 2.035 58,00 2.283 65,00 2.559 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 70 Long Backshell, Grommet & Sealed Cable Clamp Accessory Type `XLC' Style: ABBH - ** - ** - XLC - F80 How to order: ABBH - ** - ** - XLC - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement F Thread Dia. Class 2B C Max Min 7,93 0.312 11,12 0.438 13,48 0.531 13,48 0.531 15,87 0.625 19,00 0.748 19,00 0.748 23,80 0.937 23,80 0.937 31,75 1.250 35,00 1.378 41,25 1.624 2,38 0.094 6,35 0.250 7,92 0.312 7,92 0.312 9,53 0.375 12,70 0.500 12,70 0.500 15,09 0.594 15,09 0.594 23,83 0.938 24,61 0.969 30,18 1.188 5 /8" x 24 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 11/8" x 18 UNEF 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 17/8" x 16 UN 21/16" x 16 UNS 25/16" x 16 UN N T Max T1 Max Oa Min Overlap Accessory 79,47 3.129 79,47 3.129 79,47 3.129 91,33 3.596 91,33 3.596 91,33 3.596 91,33 3.596 94,51 3.721 101,51 3.996 107,86 4.246 114,21 4.496 114,21 4.496 22,00 0.866 25,00 0.984 28,00 1.102 28,00 1.102 31,00 1.220 35,00 1.378 38,00 1.496 41,00 1.614 48,00 1.889 54,00 2.126 61,00 2.402 67,00 2.638 23,80 0.937 26,97 1.062 30,18 1.188 30,18 1.188 33,32 1.312 39,67 1.562 39,67 1.562 44,45 1.750 44,45 1.750 57,15 2.250 60,33 2.375 66,68 2.625 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 7,00 0.276 71 Long Back With Grommet Accessory Type `SHE' Style: ABBH - ** - ** - SHE - F80 How to order: ABBH - ** - ** - SHE - F80 Shell size Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 Contact arrangement OT (Max.) B C 0.10 22,0 0.866 25,0 0.984 28,0 1.102 28,0 1.103 31,0 1.220 35,0 1.378 38,0 1.496 41,0 1.614 48,0 1.890 54,0 2.126 61,0 2.402 67,0 2.638 48,5 1.909 48,5 1.909 48,5 1.909 58,8 2.303 58,8 2.303 58,8 2.303 58,8 2.303 58,8 2.303 65,8 2.303 65,8 2.303 65,8 2.303 65,8 2.303 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 15,0 0.591 O D +0 / - 0.10 8,5 0.335 11,7 0.461 13,9 0.547 13,9 0.547 16,9 0.666 20,9 0.823 20,9 0.823 25,9 1.020 25,9 1.020 32,0 1.260 36,9 1.453 44,9 1.768 72 O E Thd. O F Thd. 5 /8" x 24 UNEF 5 /8" x 24 UNEF 3 /4" x 20 UNEF 3 /4" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 7 /8" x 20 UNEF 1" x 20 UNEF 1" x 20 UNEF 13/16" x 18 UNEF 3 1 /16" x 18 UNEF 17/16" x 18 UNEF 7 1 /16" x 18 UNEF 11/8" x 18 UNEF 13/4" x 18 UNS 17/8" x 16 UN 2" x 18 UNS 21/16" x 16 UNS 21/4" x 16 UN 25/16" x 16 UN 11/4" x 18 UNEF 13/8" x 18 UNEF 15/8" x 18 UNEF 0a (Min) 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 7,0 0.276 PG Threaded Adaptors (DIN 40430) Note. Metric Imperial Part Number Shell Size ABB-10SL-PGAB ABB-14S-PGA-B 10SL 14S - 14 ABB-16S-PGA-E 16S - 16 ABB-16S-PGA-F 16S - 16 ABB-18-PGA-F 18 ABB-20-PGA-E 20 - 22 ABB-20-PGA-G 20 - 22 ABB-24-PGA-F 24 - 28 ABB-24-PGA-G 24 - 28 ABB-24-PGA-H 24 - 28 ABB-32-PGA-H 32 ABB-36-PGA-H 36 ABB-40-PGA-J 40 PG threaded adaptors are used in conjunction with straight and 900 backshell styles ACA, CCA, XL & FT. For other sizes, please contact the Sales Office. OA B 20,0 0.787 23,5 0.925 28,0 1.102 34,0 1.339 34,0 1.339 37,0 1.457 43,0 1.693 43,0 1.693 43,0 1.693 54,0 2.126 54,0 2.126 57,2 2.252 65,0 2.559 35,0 1.378 35,0 1.378 35,0 1.378 40,0 1.575 40,0 1.575 35,0 1.378 40,0 1.575 40,0 1.575 40,0 1.575 46,0 1.811 38,0 1.496 50,0 1.969 51,0 2.008 73 Thread C Thread D 5 /8" x 24 UNEF PG 9 3 /4" x 20 UNEF PG 9 7 /8" x 20 UNEF PG 16 7 /8" x 20 UNEF PG 21 1" x 20 UNEF PG 21 13/16" x 18 UNEF PG 16 13/16" x 18 UNEF PG 29 17/16" x 18 UNEF PG 21 17/16" x 18 UNEF PG 29 17/16" x 18 UNEF PG 36 13/4" x 18 UNS PG 36 2" x 18 UNS PG 36 21/4" x 16 UN PG 42 Cable Clamp Style: MS 3057A Metric Imperial Shell Size MS3057 Reference AB Connectors Part Number A Thread Dia. Class 2A 10SL -4A CMSP3057A10SL 5 /8" x 24 UNEF 14S -6A CMSP3057A14S 3 /4" x 20 UNEF 16S -8A CMSP3057A16S 7 /8" x 20 UNEF 16 -8A CMSP3057A16 7 /8" x 20 UNEF 18 -10A CMSP3057A18 1" x 20 UNEF 20 -12A CMSP3057A20 13/16'' x 18 UNEF 22 -12A CMSP3057A22 13/16'' x 18 UNEF 24 -16A CMSP3057A24 17/16'' x 18 UNEF 28 -16A CMSP3057A28 17/16'' x 18 UNEF 32 -20A CMSP3057A32 13/4'' x 18 UNS 36 -24A CMSP3057A36 2'' x 18 UNS 40 -28A CMSP3057A40 21/4'' x 16 UN 74 B Max C Max D Max 21,41 0.843 25,40 1.000 28,58 1.125 28,58 1.125 30,96 1.219 35,71 1.406 35,71 1.406 42,85 1.687 42,85 1.687 52,37 2.062 57,15 2.250 64,29 2.531 7,95 0.313 11,13 0.438 14,30 0.563 14,30 0.563 15,88 0.625 19,05 0.750 19,05 0.750 23,83 0.938 23,83 0.938 31,75 1.250 34,93 1.375 41,28 1.625 21,41 0.843 23,01 0.906 24,61 0.969 24,61 0.969 24,61 0.969 24,61 0.969 24,61 0.969 26,97 1.062 26,97 1.062 28,58 1.125 30,15 1.187 43,66 1.719 Sealed Cable Clamp For Jacketed Cable Style: MS 3057C Metric Imperial Shell Size MS3057 Reference AB Connectors Part Number A Thread Dia. Class 2A 10SL -4C CMSP3057C10SL 5 /8" x 24 UNEF 14S -6C CMSP3057C14S 3 /4" x 20 UNEF 16S -8C CMSP3057C16S 7 /8" x 20 UNEF 16 -8C CMSP3057C16 7 /8" x 20 UNEF 18 -10C CMSP3057C18 1" x 20 UNEF 20 -12C CMSP3057C20 13/16'' x 18 UNEF 22 -12C CMSP3057C22 13/16'' x 18 UNEF 24 -16C CMSP3057C24 17/16'' x 18 UNEF 28 -16C CMSP3057C28 17/16'' x 18 UNEF 32 -20C CMSP3057C32 13/4'' x 18 UNS 36 -24C CMSP3057C36 2'' x 18 UNS 40 -28C CMSP3057C40 21/4'' x 16 UN 75 C Dia. Max Min 7,93 0.312 11,12 0.438 13,48 0.531 13,48 0.531 15,87 0.625 19,00 0.748 19,00 0.748 23,80 0.937 23,80 0.937 31,75 1.250 35,00 1.378 41,25 1.624 2,38 0.094 6,35 0.250 7,92 0.312 7,92 0.312 9,53 0.375 12,70 0.500 12,70 0.500 15,09 0.594 15,09 0.594 23,83 0.938 24,61 0.969 30,18 1.188 D Max E Max 34,93 1.375 34,93 1.375 34,93 1.375 34,93 1.375 36,50 1.437 36,50 1.437 36,50 1.437 39,67 1.562 39,67 1.562 46,02 1.812 52,37 2.062 52,37 2.062 23,80 0.937 26,97 1.062 30,18 1.188 30,18 1.188 33,32 1.312 39,21 1.562 39,21 1.562 44,45 1.750 44,45 1.750 57,15 2.250 60,33 2.375 66,68 2.625 Telescopic Bushing Note The bushings can fit inside one another to reduce the cable entry diameter and improving clamping and sealing. Metric Imperial Shell Size Part Number 10SL SBMSH5541 14S SBMSH5542 16S SBMSH5543 16 SBMSH5543 18 SBMSH5544 20 SBMSH5545 22 SBMSH5546 24 SBMSH5547 28 SBMSH5548 32 SBMSH5549 36 SBMSH55410 40 SBMSH55411 A B C D 12,83 0.505 15,88 0.625 19,05 0.750 19,05 0.750 22,23 0.875 25,40 1.000 28,58 1.125 31,75 1.250 38,23 1.505 44,45 1.750 47,88 1.885 52,90 2.083 69,85 2.750 66,68 2.625 63,50 2.500 63,50 2.500 60,33 2.375 57,15 2.250 57,15 2.250 53,98 2.125 53,98 2.125 50,80 2.000 47,63 1.875 44,40 1.748 5,59 0.220 7,92 0.312 11,10 0.437 11,10 0.437 14,27 0.562 15,88 0.625 15,88 0.625 19,05 0.750 19,05 0.750 23,80 0.937 31,75 1.250 34,92 1.375 7,62 0.300 10,80 0.425 13,97 0.550 13,97 0.550 15,57 0.613 18,75 0.738 18,75 0.738 23,50 0.925 23,50 0.925 31,45 1.238 34,62 1.363 40,99 1.614 76 Panel Sealing Gaskets Non-Screening, Sealing Only RFI Conductive Screening & Sealing Front Mounted Receptacle Part Number: Non-Screening- SB - ** - RPG RFI Screening- SB - ** - RPGS Rear Mounted Receptacle Part Number: Non-Screening- SB - ** - FPG RFI Screening- SB - ** - FPGS Metric Imperial Shell size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 *49 A Min B Nominal B1 Nominal d Min T Nominal 25,40 1.000 30,20 1.188 32,50 1.280 32,50 1.280 34,90 1.375 38,10 1.500 41,30 1.625 44,50 1.750 50,80 2.000 57,20 2.250 63,50 2.500 69,90 2.750 110,00 4.331 15,88 0.625 19,00 0.750 22,20 0.875 22,20 0.875 25,40 1.000 28,60 1.125 31,70 1.250 34,90 1.375 41,30 1.625 47,60 1.875 52,60 2.071 61,90 2.440 98,10 3.862 18,30 0.720 24,70 0.972 27,50 1.083 27,50 1.083 30,90 1.217 34,30 1.350 37,50 1.476 41,00 1.614 46,80 1.843 53,50 2.106 59,70 2.350 65,50 2.580 98,10 3.862 3,43 0.135 3,43 0.135 3,43 0.135 3,43 0.135 3,43 0.135 3,43 0.135 3,43 0.135 4,12 0.162 4,12 0.162 4,78 0.188 4,78 0.188 5,10 2.010 7,90 0.311 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,00 0.040 1,25 0.049 * Size 49 is available as non-screened version only. 77 Protective Caps Styles: ABBE-**-X-PCA / X-PCAK & X-PCAJ / X-PCAJK ABB-**-E-PCA / E-PCAK Caps for Single Hole Mounting Receptacle Metric Imperial Shell Size B Max C Max D Max E1 Max E2 Max F1 Max F2 Max 22,80 26,10 18,20 17,50 21,60 24,60 28,40 0.898 1.028 0.717 0.689 0.850 0.969 1.118 29,20 32,50 24,60 17,50 21,60 24,60 28,40 14S 1.150 1.280 0.969 0.689 0.850 0.969 1.118 32,40 35,30 27,40 17,50 21,60 24,60 28,40 16S 1.276 1.390 1.079 0.689 0.850 0.969 1.118 32,40 35,30 27,40 24,00 27,30 24,60 28,40 16 1.276 1.390 1.079 0.945 1.075 0.969 1.118 36,50 38,70 30,80 24,00 27,30 29,80 33,90 18 1.437 1.524 1.213 0.945 1.075 1.173 1.335 39,90 42,10 34,20 24,00 27,30 29,80 33,90 20 1.571 1.658 1.346 0.945 1.075 1.173 1.335 43,10 45,30 37,40 24,00 27,30 29,80 33,90 22 1.697 1.784 1.472 0.945 1.075 1.173 1.335 46,60 48,80 40.90 24,00 27,30 29,80 33,90 24 1.835 1.921 1.610 0.945 1.075 1.173 1.335 53,40 54,60 46,70 24,00 27,30 29,80 33,90 28 2.102 2.150 1.838 0.945 1.075 1.173 1.335 60,10 61,30 53,40 27,00 27,30 29,80 33,90 32 2.366 2.413 2.102 1.063 1.075 1.173 1.335 66,30 67,50 59,60 27,00 27,30 29,80 33,90 36 2.610 2.658 2.346 1.063 1.075 1.173 1.335 72,10 73,40 65.50 27,00 27,30 29,80 33.90 40 2.838 2.890 2.579 1.063 1.075 1.173 1.335 Note. For alternative cord or chain length, please consult the factory. 10SL 78 L approx. See note d1 Min 100,00 4.000 100,00 4.000 100,00 4.000 100,00 4.000 150,00 6.000 150,00 6.000 150,00 6.000 150,00 6.000 150,00 6.000 150,00 6.000 150,00 6.000 150,00 6.000 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 4,85 0.191 d2 Om Min +0.5, -0 Overlap +0.02, -0 Mated 4,30 0.169 4,30 0.169 4,30 0.169 4,30 0.169 4,30 0.169 4,30 0.169 4,30 0.169 4,30 0.169 4,30 0.169 5,50 0.217 5,50 0.217 5,50 0.217 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 Individual Wire Seal Grommet Dummy Pin, Socket & Grommet Filler Plug How to order: ABBH - ** - ** - GAC - F80 Shell size Metric Imperial Contact arrangement F80 Contact Sizes AWG (Metric) 16S/16 (15S/15) 12 (25) 8 (100) 4 (160) **0 (500) *Wire Insulation Min O/D *Wire Insulation Max O/D 1,52 0.060 2,44 0.096 4,90 0.193 8.18 0.322 14,00 0.551 3,20 0.126 5,12 0.202 7,20 0.283 11,00 0.433 16,00 0.630 * Please contact sales office for further detail. ** For details of grommet reducing bushes to suit 35mm2, 25mm2 & 16mm2 wire, please contact the sales office. Metric Imperial Contact Size AWG (Metric) ***16S (15S) ***16 (15) 12 (25) 8 (100) 4 (160) 0 (500) L Max d Max L1 Max d1 Max L2 Max d2 Max 12,30 0.484 12,30 0.484 12,30 0.484 12,10 0.476 12,10 0.476 12,50 0.500 3,90 0.154 3,90 0.154 3,80 0.150 7,00 0.276 10,20 0.402 15,60 0.614 20,40 0.803 20,00 0.787 20,40 0.803 22,75 0.896 3,20 0.126 3,20 0.126 4,80 0.189 7,80 0.307 26,85 1.057 36,75 1.447 37,75 1.486 40,95 1.612 3,20 0.126 3,20 0.126 4,80 0.189 7,80 0.307 * * * * Black 24,60 0.969 15,00 0.590 44,70 1.760 15,00 0.590 White 79 Colour Code Pink Brown (KDP/KDS) Orange Violet Square Flange Stowage Receptacle Style: ABCIR - ** - SX / SX - M6 Note. See page 79 for panel mounting details. Metric Imperial Part Number ABCIR-10SL-SX ABCIR-14S-SX ABCIR-16S-SX ABCIR-16-SX ABCIR-18-SX ABCIR-20-SX ABCIR-22-SX ABCIR-24-SX ABCIR-28-SX ABCIR-32-SX ABCIR-36-SX ABCIR-40-SX ABCIR-49-SX B Max C Max D1 Min 17,60 0.693 18,00 0.709 18,00 0.709 22,80 0.898 23,60 0.929 23,60 0.929 23,60 0.929 25,20 0.992 25,20 0.992 26,80 1.055 26,80 1.055 26,80 1.055 56,73 2.233 25,70 1.012 30,30 1.193 32,80 1.291 32,80 1.291 35,30 1.390 38,30 1.508 41,30 1.626 44,80 1.764 51,10 2.012 57,30 2.256 63,80 2.512 70,20 2.763 110,40 4.346 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3,20 0.126 3.70 0.146 3,70 0.146 4,30 0.169 4,30 0.169 4,30 0.169 8,50 0.335 d2 Thread M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 - 80 E Max X 3,00 0.118 3,40 0.134 3,40 0.134 3,40 0.134 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 4,20 0.165 8,20 0.323 18,20 0.717 23,10 0.909 24,60 0.969 24,60 0.969 27,00 1.063 29,40 1.157 31,80 1.252 34,90 1.374 39,70 1.563 44,50 1.752 49,20 1.937 55,50 2.185 90,00 3.543 Om min overlap mated 11,10 0.437 11,10 0.437 11,10 0.437 15,85 0.624 15,85 0.624 15,85 0.624 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 15,75 0.620 Square Fange Receptacle Nut Plates Style: ABB ** NP (Metric Thread) / NPA (UNC Thread) Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 A B Max C Dia. Max D E Max F Dia. Max 18,26 0.719 23,01 0.906 24,61 0.969 24,61 0.969 26,97 1.062 29,36 1.156 31,75 1.250 34,93 1.375 39,67 1.562 44,45 1.750 49,23 1.968 55,58 2.188 26,26 1.034 30,66 1.207 32,26 1.270 32,26 1.270 34,62 1.363 38,48 1.515 40,84 1.608 44,83 1.765 51,18 2.015 59,10 2.327 63,86 2.514 74,68 2.940 17,85 0.702 24,59 0.968 28,17 1.109 28,17 1.109 30,48 1.250 33,53 1.320 36,65 1.443 40,00 1.575 46,61 1.835 52,75 2.077 59,10 2.327 68,33 2.690 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 2,69/4,22 0.106/0.166 3,50/5,00 0.138/0.197 3,50/5,00 0.138/0.197 3,50/5,00 0.138/0.197 11,50 0.453 16,25 0.640 17,85 0.703 17,85 0.703 20,21 0.796 22,47 0.885 23,54 0.927 25,90 1.020 29,08 1.145 30,68 1.208 35,43 1.395 38,60 1.520 6,00 0.236 6,00 0.236 6,00 0.236 6,00 0.236 6,00 0.236 6,00 0.236 6,00 0.236 7,50 0.295 7,50 0.295 8,00 0.315 8,00 0.315 8,00 0.315 81 T Thread Part Number T Thread Part Number M3 x 0,5 ABB10SLNP 4 - 40 UNC ABB10SLNPA M3 x 0,5 ABB14SNP 4 - 40 UNC ABB14SNPA M3 x 0,5 ABB16SNP 4 - 40 UNC ABB16SNPA M3 x 0,5 ABB16NP 4 - 40 UNC ABB16NPA M3 x 0,5 ABB18NP 4 - 40 UNC ABB18NPA M3 x 0,5 ABB20NP 4 - 40 UNC ABB20NPA M3 x 0,5 ABB22NP 4 - 40 UNC ABB22NPA M3 x 0,5 ABB24NP 4 - 40 UNC ABB24NPA M3 x 0,5 ABB28NP 4 - 40 UNC ABB28NPA M4 x 0,7 ABB32NP 8 - 32 UNC ABB32NPA M4 x 0,7 ABB36NP 8 - 32 UNC ABB36NPA M4 x 0,7 ABB40NP 8 - 32 UNC ABB40NPA * *** Please consult factory for availability. For Grommet Filler Plugs (KFP), do not add F80 to part number. Colour Blue. Square Flange Receptacles Panel Mounting Detail Front Mounting Style: ABCIRH00 ABCIRH04 ABCIRH12A Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 49 Rear Mounting Style: ABCIRH03 ABCIRH05 & 07 Note 1. When fixed connectors are used with threaded mounting holes, refer to hole sizes in column d4. Note 2. When fixed connectors are used with plugs having rubber coupling nuts, please consult factory for panel cut-out dimensions. d3 dia. d4 dia. V W W1 X 3,40 0.134 3,40 0.134 3,40 0.134 3,40 0.134 3,40 0.134 3,40 0.134 3,40 0.134 3,90 0.154 3,90 0.154 4,50 0.177 4,50 0.177 4,50 0.177 8,50 0.315 4,50 0.177 4,50 0.177 4,50 0.177 4,50 0.177 4,50 0.177 4,50 0.177 4,50 0.177 4,50 0.177 5,50 0.217 5,50 0.217 5,50 0.217 5,50 0.217 26,60 1.047 31,60 1.244 34,40 1.354 34,40 1.354 38,30 1.508 41,70 1.642 45,20 1.780 48,70 1.917 55,50 2.185 62,40 2.475 69,00 2.717 75,00 2.953 140,00 5.512 17,00 0.670 20,00 0.780 23,00 0.906 23,00 0.906 26,00 1.024 30,00 1.181 33,00 1.300 36,00 1.417 42,00 1.654 48,50 1.909 55,00 2.165 59,10 2.327 91,00 3.583 18,58 0.732 24,98 0.984 27,78 1.094 27,78 1.094 31,18 1.228 34,58 1.361 37,78 1.487 41,28 1.625 47,08 1.854 53,78 2.117 59,98 2.361 66,4 2.614 91,00 3.583 18,20 0.717 23,00 0.906 24,60 0.969 24,60 0.969 27,00 1.063 29,40 1.157 31,80 1.252 34,90 1.374 39,70 1.563 44,50 1.752 49,20 1.937 55,50 2.186 90,00 3.543 - 82 Single Hole Mounting Receptacle Panel Mounting Detail Note. When fixed connectors are used with plugs having rubber coupling nuts, please consult factory for panel cut-out dimensions. Metric Imperial Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 40 H ctrs. J dia. K 32,55 1.281 42,05 1.656 45,15 1.776 45,15 1.776 48,85 1.923 52,05 2.049 55,45 2.183 58,45 2.301 65,25 2.569 71,55 2.817 77.95 3.069 85,25 3.356 22,53 0.887 28,88 1.137 32,08 1.263 32,08 1.263 35,23 1.387 38,43 1.513 41,56 1.636 44,78 1.763 51,13 2.013 57,48 2.263 63,83 2.513 70,18 2.763 20,83 0.820 27,23 1.072 30,78 1.212 30,78 1.212 33,58 1.322 36,68 1.444 39,88 1.570 43,18 1.700 49,37 1.944 55,78 2.196 62,18 2.448 68,38 2.692 83 F80 Crimp Contacts Insertion & Extraction Tools Socket Contact Guide Pins Insertion Tool Extraction Tool Contact Size AWG (Metric) Insertion Tool Part Number Contact Size AWG (Metric) Extraction Tool Part Number 16 (16S) ABB-IT-16 16 (16S) ABB-ET-16 16 (15) ABB-IT-16 16 (15) ABB-ET-16 12 (25) ABB-IT-12 12 (25) ABB-ET-12 8 (100) 4 (160) 8 (100) Tool Not Required 4 (160) Tool Not Required 0 (500) 0 (500) Socket Contact Guide Pin Socket Contact Size AWG (Metric) Guide Pin Part Number 16 (16S) ABB-16-SGP 16 (15) ABB-16-SGP 12 (25) ABB-12-SGP Note. For full assembly instructions, see AB Specification 514. Contact the sales office for a copy. 8 (100) 4 (160) Guide Pin Not Required 0 (500) 84 F80 Contacts Crimp & Tooling Data Contact Size & Type Contact Part Number Wire Size C.S.A. mm2 Tool Required 16S/20 Pin ABB16S/20KPKF80 0,5/0,75 AF8/WA27F Tool Pos'n Turret/ Tool If Locator Setting Applicable TP1249 3 - Insertion Extraction Tool Tool ABBIT16 Guide Pins ABBET16 - 16S/20 Skt. ABB16S/20KSKF80 0,5/0,75 AF8/WA27F TP1249 3 - ABBIT16 ABBET16 ABB16SG 16S/18 Pin ABB16S/18KPKF80 0,75/0,93 AF8/WA27F TP1249 4 - ABBIT16 ABBET16 - 16S/18 Skt. ABB16S/18KSKF80 0,75/0,93 AF8/WA27F TP1249 4 - ABBIT16 ABBET16 ABB16SG 16S/14 Pin ABB16S/14KPKf80 1,94/2,08 AF8/WA27F TP1249 5 - ABBIT16 ABBET16 - 16S/14 Skt. ABB16S/14KSKf80 1,94/2,08 AF8/WA27F TP1249 5 - ABBIT16 ABBET16 ABB16SG 16S Pin ABB16SKPKF80 0,93/1,5 AF8/WA27F TP1249 5 - ABBIT16 ABBET16 - 16S Skt. ABB16SKSKF80 0,93/1,5 AF8/WA27F TP1249 5 - ABBIT16 ABBET16 ABB16SG LIF 16S Skt. ABB16SKLKF80 0,93/1,5 AF8/WA27F TP1249 5 - ABBIT16 ABBET16 ABB16SG 16/22 Pin ABB16/22KPKF80 0,22/0,34 AF8/WA27F TH592 2/3 Red ABBIT16 ABBET16 - 16/22 Skt. ABB16/22KSKF80 0,22/0,34 AF8/WA27F TH592 2/3 Blue ABBIT16 ABBET16 ABB16SG 16/20 Pin ABB16/20KPKF80 0,5/0,75 AF8/WA27F TH592 3 Blue ABBIT16 ABBET16 - 16/20 Skt. ABB16/20KSKF80 0,5/0,75 AF8/WA27F TH592 3 Red ABBIT16 ABBET16 ABB16SG LIF16/20 Skt. ABB16/20KLKF80 0,5/0,75 AF8/WA27F TH592 3 Red ABBIT16 ABBET16 ABB16SG 16/18 Pin ABB16/18KPKF80 0,75/0,93 AF8/WA27F TH592 4 Blue ABBIT16 ABBET16 - 16/18 Skt. ABB16/18KSKF80 0,75/0,93 AF8/WA27F TH592 4 Red ABBIT16 ABBET16 ABB16SG 16 Pin ABB16KPKF80 0,93/1,5 AF8/WA27F TH592 5 Blue ABBIT16 ABBET16 - 16 Skt. ABB16KSKF80 0,93/1,5 AF8/WA27F TH592 5 Red ABBIT16 ABBET16 ABB16SG LIF 16 Skt. ABB16KLKF80 0,93/1,5 AF8/WA27F TH592 5 Red ABBIT16 ABBET16 ABB16SG 16/14 Pin ABB16/14KPKF80 1,94/2,08 AF8/WA27F TH592 5 Blue ABBIT16 ABBET16 - 16/14 Skt. ABB16/14KSKF80 1,94/2,08 AF8/WA27F TH592 5 Red ABBIT16 ABBET16 ABB16SG 16/12 Pin ABB16/12KPKF80 2,50/3,00 AF8/WA27F TH592 7 Yellow ABBIT16 ABBET16 - 16/12Skt. ABB16/12KSKF80 2,50/3,00 AF8/WA27F TH592 7 Yellow ABBIT16 ABBET16 ABB16SG 12/20 Pin ABB12/20KPKF80 0,5/0,75 AF8/WA27F TH592 3 Yellow ABBIT12 ABBET12 - 12/20 Skt. ABB12/20KSKF80 0,5/0,75 AF8/WA27F TH592 3 Yellow ABBIT12 ABBET12 ABB12SG LIF 12/20 Skt. ABB12/20KLKF80 0,5/0,75 AF8/WA27F TH592 3 Yellow ABBIT12 ABBET12 ABB12SG 12/18 Pin ABB12/18KPKF80 0,75/0,93 AF8/WA27F TH592 4 Yellow ABBIT12 ABBET12 - 12/18 Skt. ABB12/18KSKF80 0,75/0,93 AF8/WA27F TH592 4 Yellow ABBIT12 ABBET12 ABB12SG 12/16 Pin ABB12/16KPKF80 0,93/1,5 AF8/WA27F TH592 5 Yellow ABBIT12 ABBET12 - 12/16 Skt. ABB12/16KSKF80 0,93/1,5 AF8/WA27F TH592 5 Yellow ABBIT12 ABBET12 ABB12SG LIF 12/16 Skt. ABB12/16KLKF80 0,93/1,5 AF8/WA27F TH592 5 Yellow ABBIT12 ABBET12 ABB12SG 12/14 Pin ABB12/14KPKF80 1,94/2,08 AF8/WA27F TH592 5 Yellow ABBIT12 ABBET12 - 12/14 Skt. ABB12/14KSKF80 1,94/2,08 AF8/WA27F TH592 5 Yellow ABBIT12 ABBET12 ABB12SG 12 Pin ABB12KPKF80 2,50/3,00 AF8/WA27F TH592 7 Yellow ABBIT12 ABBET12 - 12 Skt. ABB12KSKF80 2,50/3,00 AF8/WA27F TH592 7 Yellow ABBIT12 ABBET12 ABB12SG LIF 12 Skt. ABB12KLKF80 2,50/3,00 AF8/WA27F TH592 7 Yellow ABBIT12 ABBET12 ABB12SG 12/10 Pin ABB12/10KPKF80 5,53 M310 TH592 5 Yellow ABBIT12 ABBET12 - 12/10 Skt. ABB12/10KSKF80 5,53 M310 TH592 5 Yellow ABBIT12 ABBET12 ABB12SG 12/40 Pin ABB12/40KPKF80 4,0 M310 TH592 5 Yellow ABBIT12 ABBET12 - 12/40 Skt. ABB12/40KSKF80 4,0 M310 TH592 5 Yellow ABBIT12 ABBET12 ABB12SG 85 F80 Contacts Crimp & Tooling Data cont. Contact Size & Type Wire Size C.S.A. mm2 Contact Part Number Tool Required Turret/ Locator Tool Tool Pos'n Insertion Extraction Guide If Setting Tool Tool Pins Applicable 8/40 Pin ABB8/40KPKF80 4,0 D55E Die Set - - - - - 8/40 Skt. ABB8/40KSKF80 4,0 D55E Die Set - - - - - 8/12 Pin ABB8/12KPKF80 2,5 M310 Consult Factory 3 - - - - 8/12 Skt. ABB8/12KSKF80 2,5 M310 Consult Factory 3 - - - - 8/10 Pin ABB8/10KPKF80 5,53 D55E Die Set - - - - - 8/10 Skt. ABB8/10KSKF80 5,53 D55E Die Set - - - - - 8 Pin ABB8KPKF80 9,0 ERMA 19600 22390 - - - - - 8 Skt. ABB8KSKF80 9,0 ERMA 19600 22390 - - - - - 100/60 Pin ABB100/60KPKF80 6,0 D55E Die Set - - - - - 100/60 Skt. ABB100/60KSKF80 6,0 D55E Die Set - - - - - 100 Pin ABB100KPKF80 10,0 D55E Die Set MRP0925 - - - - - 100 Skt. ABB100KSKF80 10,0 D55E Die Set MRP0925 - - - - - 4/10 Pin ABB4/10KPKF80 5,53 D55E Die Set - - - - - 4/10 Skt. ABB4/10KSKF80 5,53 D55E Die Set - - - - - 4 Pin ABB4KPKF80 22,0 ERMA 19600 Die set 22391 - - - - - 4 Skt. ABB4KSKF80 22,0 ERMA 19600 Die Set 22391 - - - - - 160 Pin ABB160KPKF80 16,0 D55E Die Set MRP0924 - - - - - 160 Skt. ABB160KSKF80 16,0 D55E Die Set MRP0924 - - - - - 0 Pin ABB0KPKF80 53,0 ERMA 19600 Die Set 22392 - - - - - 0 Skt ABB0KSKF80 53,0 ERMA 19600 Die Set 22392 - - - - - 500/160 Pin ABB500/160KPKF8 16,0 D55E Die Set MRP0924 - - - - - 500/160 Skt. ABB500/160KSKF8 16,0 D55E Die Set MRP0924 - - - - - 500/250 Pin ABB500/250KPKF8 25,0 D55E Die Set - - - - - 500/250 Skt. ABB500/250KSKF8 25,0 D55E Die Set - - - - - 500/350 Pin ABB500/350KPKF8 35,0 D55E Die Set - - - - - 500/350 Skt. ABB500/350KSKF8 35,0 D55E Die Set - - - - - 500 Pin ABB500KPKF80 50,0 D55E Die Set MRP0925 - - - - - 500 Skt. ABB500KSKF80 50,0 D55E Die Set MRP0925 - - - - - Note. For full assembly and wiring instructions for ABCIRH connectors, see AB Specification 514. To obtain a copy, please contact the Sales Office. 86 F80 Coax & Twinax Contacts Crimp & Tooling Data Contact Size & Type Contact Part Number Wire Size C.S.A. mm2 Contact Section Tool Required Turret/ Locator 4 Coax Pin ABB4CKPKF80P1001 0.5 Inner AF8 TH619 4 Red Screen D55E/D51 31038 - - Inner AF8 TH619 4 Blue Screen D55E/D51 31038 - - Inner AF8 TH619 4 Red Screen D55E/D51 HD51-150 - - Inner AF8 TH619 4 Blue Screen D55E/D51 HD51-150 - - Inner AF8 TH608 4 Red Intermediate HX4 Y946 - - Screen D55E/D51 HD51-150 - - Inner AF8 TH608 4 Blue Intermediate HX4 Y946 - - Screen D55E/D51 HD51-150 - - Inner AF8 TH608 4 Red Intermediate HX4 Y946 - - Screen D55E/D51 HD51-150 - - Inner AF8 TH608 4 Blue Intermediate HX4 Y946 - - Screen D55E/D51 HD51-150 - - 4 Coax Skt 4 Coax Pin 4 Coax Skt. 4 Twinax Pin 4 Twinax Skt 4 Twinax Pin 4 Twinax Skt. ABB4CKSKF80P1001 ABB4CKPKF80P1002 ABB4CKSKF80P1002 ABB4TKPKF80P1 ABB4TKSKF80P1 ABB4TKPKF80P1001 ABB4TKSKF80P1001 0.5 1.0 1.0 0.5/0.6 0.5/0.6 0.75/1.0 0.75/1.0 Note. For full assembly and wiring instructions for Coax & Twinax contacts, see AB Specification 525. To obtain a copy, please contact the Sales Office. 87 Tool Tool Position Setting If Applicable Braid Sock - 50mm Diameter AB Connectors Limited Product Safety Information Product Safety The connectors referred to in this catalogue may be safely used within the special ratings and environment for which they have been designed. However, they comprise a complex build of different materials including metals and plastics which themselves are plated and cleaned with various chemical compounds during the assembly process. It is important to understand that hazards can occur if connectors are used:1. Outside the specified design criteria and/or incorrectly integrated into equipment. 2. When damaged in use, assembly, transit or storage. 1. Ensure all conductors & wires are capable of withstanding the electrical and environmental conditions of the application. 2. Always use the correct tools for cables, contacts and connectors. 3. Make circuit resistance checks before making a circuit live. 4. Always protect line circuits and never demate a live connector. 5. Never use a damaged connector. 6. Never burn discarded connectors or cable. 7. IF IN DOUBT ASK. Electrical safety factors are the responsibility of the user. 3. Incorrectly wired or assembled. NB: 4. Where the quality of installation is below the standard required to maintain and uphold good practice. Note. 5. Where good housekeeping is not observed during use, assembly, transit or storage and allowing contamination from debris and fluids etc. This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the company in writing) is not to form part of any orderor contract or be regarded as a representation relating to the products or services concerned. The company reserves the right and may change or vary specification without prior written notice. Safety Rules U.K. Headquaters U.S.A Manufacturing & Sales AB Connectors Limited Abercynon Mountain Ash Mid Glamorgan CF45 4SF U.K. AB Connectors Division Business US 70 East Smithfield NC 27577 Tel. # 44 (0) 1443 740331 Fax. # 44 (0) 1443 741676 E-mail abconnectors@abautomotiveusa.com Internet - http://www.ttabconnectors.com E-mail - sales@ttabconnectors.com A subsidiary of TT electronics plc A subsidiary of TT electronics plc Tel. Fax. July 2001 edition 919 934 5181 919 934 0652