Ordering information AC-DC Power Supplies Configurable type ACE series ACO-OOOOOO-O O-O O 1 2 3 4 5 6 7 8 Recommended EMI/EMC Filter ACE300F NAC-06-472 ACE450F NAC-10-472 ACE650F NAC-20-472 ACE900F NAC-20-472 R High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. 9 10 1 Abbreviation type name of ACE series 2 Abbreviation power of ACE series 3 : ACE300F 4 : ACE450F 6 : ACE650F 9 : ACE900F 3 Slot 6 Output module 4 Slot 5 Output module 5 Slot 4 Output module 6 Slot 3 Output module 7 Slot 2 Output module 8 Slot 1 Output module 9 Parallel code 10 Option (series code) *8 Refer to instruction manual 5.1 Safety : UL60601-1, EN60601-1 Refer to instruction manual 7. for details. 6 5 4 3 2 1 Slot *The number of slot is different depending on the model. *Empty slot is code:0 SPECIFICATIONS INPUT ACE OUTPUT FUNCTION ISOLATION ENVIRONMENT MODEL VOLTAGE[V] FREQUENCY[Hz] AC100V *1 CURRENT[A] AC200V *1 AC100V *1 POWER FACTOR AC200V *1 INRUSH CURRENT AC100V *2 [A] AC200V *2 AC100V *1 EFFICIENCY[%] AC200V *1 AC100V *3 LEAKAGE CURRENT[mA] AC230V *3 NUMBER OF SLOT AC90 - 150V *4 TOTAL OUTPUT[W] AC170 - 264V *4 START-UP TIME[ms] *1 HOLD-UP TIME[ms] AUXILIARY POWER (AUX) ALARM (PR) INPUT-OUTPUT, RC, AUX INPUT-FG OUTPUT, RC, AUX(PR)-FG *5 OPERATING TEMP.,HUMID. AND ALTITUDE *4 STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT SAFTY AND AGENCY APPROVALS NOISE CONDUCTED NOISE REGULATIONS HARMONIC ATTENUATOR CASE SIZE OTHERS WEIGHT[kg] COOLING METHOD *6 ACE300F ACE450F ACE650F ACE900F AC85 - 264 1f / DC120 - 350 (option=-U AC70 or DC100 - refer to instruction manual 5) 47 - 63 3.7typ 5.7typ 8.0typ 11typ 2.0typ 3.1typ 4.2typ 5.7typ 0.99typ 0.95typ 15 / 30typ *7 15 / 50typ *7 30 / 30typ *7 30 / 50typ *7 74typ 75typ 77typ 77typ 78typ 78typ 80typ 80typ 0.5max 0.95max 6 4 5 5 250 400 600 800 (Peak 1k) 900 (Peak 1k) 300 450 650 500max (ACIN100V, Io=100%) 20typ (ACIN100V, Io=100%) 12V 0.1A (Only for Remote ON/OFF) (option=-J 5V0.1A) FAN alarm, LINE alarm AC3,000V 1minute, Cutoff current=10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current=10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current=100mA, DC500V 50MW min (At Room Temperature) -20 to +70C, 20 - 90%RH (Non condensing) 3,000m (10,000feet ) max -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max 19.6m/s2 (2G) , 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G) , 11ms, once each X, Y and Z axis UL60950-1, C-UL (CSA60950-1), EN60950-1, EN50178, Complies with DEN-AN (At only AC input) UL60601-1, EN60601-1 (At only AC input) (Refer to instruction manual 7) Complies with FCC-B, VCCI-B, CISPR22-B and EN55022-B Complies with IEC61000-3-2 *9 103X63.5X254mm (WXHXD) 127X63.5X254mm (WXHXD) 127X63.5X279mm (WXHXD) 177.5X63.5X254mm (WXHXD) [4.06X2.5X10 inches] [5X2.5X10 inches] [5X2.5X10.98 inches] [6.99X2.5X10 inches] 1.7max Forced cooling (built-in) *1 In case of modular power supply, the value changes by composing and load factor of installed ouput modules. The values in specifications mean each the model are composed of voluntary modules that are 5V (code : C), 12V (code : E), 24V (code : H) and the output power is total ACE-2 2.2max 2.4max ouput wattage under the prescribed conditions. *2 More than 3sec. to restart. Io=100% *3 Complies with IEC60950 and DEN-AN 60Hz and 100% load. *4 Refer to instruction manual 4.2 Derating in detail. *5 Each output module, RC and AUX are isolated. 3.0max *6 *7 *8 *9 * Case size contains neither the terminal blocks, screw nor. Primary inrush current / Secondary inrush current. Please contact us about safety approvals for the model with option. Please contact us about class C. A sound may occur from power supply at pulse loading. ACE series Output module specifications 150W suitable single output 50W suitable single output 75W dual output CODE ITEM Number of slots used VOLTAGE[V] MINIMUM CURRENT[A] CURRENT1[A] CURRENT2[A] *1 PEAK CURRENT[A] LINE REGULATION[mV]max LOAD REGULATION1[mV]max *5 LOAD REGULATION2[mV]max *6 0 to +50C *2 RIPPLE [mVp-p]max -20 to 0C *2 0 to +50C *2 RIPPLE NOISE [mVp-p]max -20 to 0C *2 TEMPERATURE 0 to +50C COEFFICIENT[mV]max *3 DRIFT[mV]max OUTPUT VOLTAGE SETTING[V] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] *4 OVERCURRENT PROTECTION[A] OVERVOLTAGE PROTECTION[V] FUNCTION F G A B C D E H J K 1 1 1 1 1 1 1 1 1 1 +2 +3.3 +5 +7.5 +12 +15 +18 +24 +34 +48 0 0 0 0 0 0 0 0 0 0 26 26 26 18 13 10 8.5 6.5 4.5 3.2 -- -- -- -- -- -- -- -- -- -- 12 10 -- -- -- -- 14 8 5.5 4 20 20 20 36 48 96 120 192 60 72 40 40 40 100 100 120 120 150 180 300 -- -- -- -- -- -- -- -- -- -- 80 80 80 120 120 120 120 120 120 150 140 140 140 160 160 160 160 160 160 300 120 120 120 150 150 150 150 150 150 350 160 160 160 180 180 180 180 180 180 400 50 50 50 90 120 150 180 240 300 480 60 72 20 20 20 36 48 96 120 192 2.00-2.20 3.25-3.45 4.99-5.30 7.20-7.80 11.5-12.5 14.4-15.6 17.3-18.7 23.0-25.0 33.0-35.0 46.0-50.0 1.60-2.60 2.60-3.60 4.00-5.50 6.00-8.20 9.00-13.2 13.2-16.5 16.5-19.2 19.2-26.4 27.2-37.4 38.4-52.8 Works over 105%min of rated current or 101%min of peak 3.00-4.80 4.00-5.25 Works at 115 - 140% of rated voltage Remotesensing, remote ON/OFF, alarm (LV) 300W suitable single output 100W insulation dual output CODE ITEM Number of slots used VOLTAGE[V] MINIMUM CURRENT[A] CURRENT1[A] CURRENT2[A] *1 PEAK CURRENT[A] LINE REGULATION[mV]max LOAD REGULATION1[mV]max *5 LOAD REGULATION2[mV]max *6 0 to +50C *2 RIPPLE [mVp-p]max -20 to 0C *2 0 to +50C *2 RIPPLE NOISE [mVp-p]max -20 to 0C *2 TEMPERATURE 0 to +50C COEFFICIENT[mV]max *3 DRIFT[mV]max OUTPUT VOLTAGE SETTING[V] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION[A] OVERVOLTAGE PROTECTION[V] FUNCTION 2B 2A 2C 2D 2E 2F 2G 2H 2J 2K 2 2 2 2 2 2 2 2 2 2 +2 +3.3 +5 +7.5 +12 +15 +18 +24 +34 +48 0 0 0 0 0 0 0 0 0 0 60 60 40 25 20 17 14 10 7 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 34 27 23 20 14 10 20 20 20 36 48 60 72 96 120 192 40 40 100 100 120 120 150 180 300 40 -- -- -- -- -- -- -- -- -- -- 80 80 80 120 120 120 120 120 120 150 140 140 140 160 160 160 160 160 160 300 120 120 120 150 150 150 150 150 150 350 160 160 160 180 180 180 180 180 180 400 50 50 50 90 120 150 180 240 300 480 20 20 20 36 48 60 72 96 120 192 2.00-2.20 3.25-3.45 4.99-5.30 7.20-7.80 11.5-12.5 14.4-15.6 17.3-18.7 23.0-25.0 33.0-35.0 46.0-50.0 1.60-2.60 2.60-3.60 4.00-5.50 6.00-8.20 9.00-13.2 13.2-16.5 16.5-19.2 19.2-26.4 27.2-37.4 38.4-52.8 Works over 105%min of rated current or 101%min of peak 3.00-4.80 4.00-5.25 Works at 115 - 140% of rated voltage Remotesensing, remote ON/OFF, alarm (LV) S *8 T *8 U *8 1 1 1 V1:+5 V2:+5 V1:+5 V2:+12 V1:+5 V2:+24 0 0 0 0 0 0 10 5 10 4.2 10 2.1 -- -- -- -- -- -- -- -- -- -- -- -- 20 20 20 48 20 96 40 40 40 100 40 150 -- -- -- -- -- -- 80 80 80 120 80 120 140 140 140 160 140 160 120 120 120 150 120 150 160 160 160 180 160 180 50 50 50 120 50 240 20 20 20 48 20 96 4.99-5.30 4.99-5.30 4.99-5.30 11.5-12.5 4.99-5.30 23.0-25.0 4.99-5.50 3.00-5.50 4.99-5.50 7.50-13.2 4.99-5.50 15.0-26.4 current. Automatic recovery. Q*7 1 12 0 6.4 8 10 48 600 750 140 200 230 350 120 48 11.5-12.5 9.60-13.2 Remote ON/OFF Same as W,Z W*7 1 12 0 3.2 4.2 5 48 600 750 120 160 150 180 120 48 11.5-12.5 9.60-13.2 Z *7 1 15 0 2.5 3.5 4 60 600 750 120 160 150 180 150 60 14.4-15.6 13.2-16.5 9 *7 1 24 0 1.6 2.5 -- 60 600 750 120 160 150 180 150 60 23.0-25.0 19.2-26.4 13.8-16.8 17.25-21.0 27.6-33.6 150W dual output V*7 1 15 0 5.5 7 8 60 600 750 140 200 230 350 150 60 14.4-15.6 13.2-16.5 = I 1 Imput module Refer to Instruction manual 6 Input. *1 Operating condition of peak current : Peak current is less than 10sec., duty is less than 35% and average current is less than rated current. (rated current2 at Module W, Z, 9, Q and V) *2 Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN : RM101). Ripple and Ripple Noise is measured by using measuring board with capacitor of 22mF within 150mm from output terminal. *3 Drift is changed in DC output for an eight hour period after half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *4 When the output voltage of module A is used less than 2.0V, keep minimum output current 2.6A. *5 It is a value from 0 to rated output current1. The current on non-measurement side is fixed. *6 It is a value from 0 to rated output current2. The current on non-measurement side is fixed. *7 The sum of +power and -power must be less than output power(Y:50W, W:76.8W, Z:75W, 9:76.8W, Q:153.6W, V:165W). L M N P R Y*7 1 1 1 1 1 1 +3.3 +5 +12 +15 +24 5 0 0 0 0 0 0 10 10 5 4 2.5 3 -- -- -- -- -- 7 -- -- -- -- -- -- 20 20 48 60 96 20 40 40 100 120 150 250 -- -- -- -- -- 500 80 80 120 120 120 80 140 140 160 160 160 140 120 120 150 150 150 120 160 160 180 180 180 160 50 50 120 150 240 50 20 20 48 60 96 20 3.25-3.45 4.99-5.30 11.5-12.5 14.4-15.6 23.0-25.0 4.99-5.30 2.60-3.60 4.00-5.50 9.00-13.2 13.2-16.5 19.2-26.4 4.99-6.00 current. Automatic recovery. 4.00-5.25 Works at 115 - 140% of rated voltage 6.90-8.40 Remote ON/OFF, alarm (LV) -- *8 Ratings of V2 can draw up to 50% of rated current at the time of 0A in load of V1. (Only module S,T,U. refer to instruction manual 4.2 for details.) * Each output of module Y-Z, 9, Q and V is a ground common type (not isolated),each output of module S,T and U is isolated. = For ACE300F,450F and 650F , input and output terminals can be set at the same side if Input module (code:I) is installed instead of the most left module. * Modules which can correspond to medical electrical equipment (UL2601-1, EN60601-1) are all modules except module S, T and U. Refer to instruction manual 7. for details. Block diagram INPUT AC85 - 264V NOISE FILTER INRUSH CURRENT LIMITING ACTIVE FILTER RECTIFIER AND FILTER OUTPUT MODULE 2-6 SLOTS DC OUTPUT REMOTE ON/OFF FG AUXILIARY POWER FUSE ACE300F : AC250V8A ACE450F : AC250V10A ACE650F : AC250V15A ACE900F : AC250V20A DETECTED OUTPUT VOLTAGE ALARM(LV) AUXILIARY POWER(AUX) FAN DETECTED LINE VOLTAGE ALARM ALARM(PR) ACE-3 ACE ACE series ACE300F external view 4-M4 Mounting hole 171.5 t0.5 [6.75] Name plate(Top) 19 [0.75] 76.2 t0.5 Connector Mating connector XHP-3 Terminal Reel : SXH-001T-P0.6 Bulk : BXH-001T-P0.6 [0.5] TB1 AIR FLOW Mating connector and terminal of CN1 CN1 S3B-XH-A 12.75 [0.57] [0.75] L N FG 4-M4 Mounting hole(Bottom) Pin connection and function of CN1 Function : Auxiliary power ground G PR : PR alarm AUX : Auxiliary power (only remote ON/OFF) 14.5 19 38 t0.5 [0.39] [0.27] [0.34] 8.6 TB1 10 M4 (Bottom) CN1 171.5 t0.5 [1.5] [10] 6.9 FG [2.5] 33 63.5 [1.3] [1.28] L N [0.45] 11.5 254 [0.69] [6.75] 13 Pin No. 1 2 3 17.5 [0.59] (Top) 32.5 15 [3] [3.1] 13.4 56.5 [2.22] 78.7 [0.53] 103 [4.06] Mfr. J.S.T. SLOT1 Tolerance : t1 [t0.04] 4-M4 Mounting hole Weight : 1.7kg max 171.5 t0.5 [6.75] TB2 19 [0.75] ]=inches 38 t0.5 Dimensions in mm, [ FG N L Mounting torque : 1.2N * m (12.8kgf * cm) max 12.75 Screw tighting torque M4 : 1.6N * m (16.9kgf * cm) max Terminal cover M3 : 0.8N * m (8.5kgf * cm) max [0.5] Chassis material : Aluminium [1.5] PCB Material/thickness : FR-4 / 1.6mm [0.06] [10] 4-M4 Mounting hole(Bottom) Pin connection and function of CN1 Function : Auxiliary power ground G PR : PR alarm AUX : Auxiliary power (only remote ON/OFF) t0.5 L N FG 171.5 t0.5 Name plate(Top) [6.75] 19 [0.75] TB1 AIR FLOW Mating connector and terminal of CN1 Connector Mating connector CN1 S3B-XH-A XHP-3 Terminal Reel : SXH-001T-P0.6 Bulk : BXH-001T-P0.6 [0.57] 38 [0.39] 6.9 10 [0.34] 8.6 M4 [0.75] [0.5] TB1 [6.75] 14.5 19 12.75 (Bottom) 171.5 t0.5 [0.27] FG [2.5] 33 [1.3] 32.5 L N [0.45] 11.5 Pin No. 1 2 3 254 [0.69] [0.59] 1 3 CN1 17.5 [1.5] 15 4-M4 Mounting hole [4] [2.5] [1.28] (Top) 92.5 [3.64] 63.5 ACE 63.5 101.5 t0.5 [5] [0.5] 127 12.75 ACE450F external view Mfr. J.S.T. SLOT1 Tolerance : t1 [t0.04] 4-M4 Mounting hole Mounting torque : 1.2N * m (12.8kgf * cm) max FG N L t0.5 ]=inches Screw tighting torque M4 : 1.6N * m (16.9kgf * cm) max M3 : 0.8N * m (8.5kgf * cm) max ACE-4 19 [0.75] Terminal cover 38 Dimensions in mm, [ [6.75] [1.5] Chassis material : Aluminium 171.5 t0.5 [0.5] PCB Material/thickness : FR-4 / 1.6mm [0.06] 12.75 Weight : 2.2kg max TB2 ACE series ACE650F external view 38 t0.5 [0.39] [0.75] L N FG 19 [0.75] AIR FLOW Mating connector and terminal of CN1 Connector Mating connector CN1 S3B-XH-A XHP-3 [4] t0.5 TB1 [0.5] 171.5 t0.5 Name plate(Top) [6.75] 12.75 4-M4 Mounting hole(Bottom) Pin connection and function of CN1 Function : Auxiliary power ground G PR : PR alarm AUX : Auxiliary power (only remote ON/OFF) [0.57] 19 [0.27] M4 TB1 (Bottom) 14.5 171.5 t0.5 [0.5] [10.98] [0.34] 8.6 FG 6.9 10 [2.5] 33 63.5 [1.3] 32.5 279 [0.69] [6.75] 1 3 Pin No. 1 2 3 17.5 [0.59] L N CN1 4-M4 Mounting hole 12.75 15 [0.45] 11.5 [2.5] 92.5 [3.64] [1.28] (Top) 63.5 101.5 [5] [1.5] 127 Mfr. Terminal Reel : SXH-001T-P0.6 Bulk : BXH-001T-P0.6 J.S.T. SLOT1 Tolerance : t1 [t0.04] 4-M4 Mounting hole Weight : 2.4kg max TB2 171.5 t0.5 19 [6.75] [0.75] PCB Material/thickness : FR-4 / 1.6mm [0.06] 38 [1.5] t0.5 FG N L ]=inches [0.5] Dimensions in mm, [ 12.75 Chassis material : Aluminium Mounting torque : 1.2N * m (12.8kgf * cm) max Screw tighting torque M4 : 1.6N * m (16.9kgf * cm) max Terminal cover M3 : 0.8N * m (8.5kgf * cm) max ACE900F external view [1.3] [0.75] L N FG [2.5] 63.5 13 Terminal Cover 21.8 19 [0.86] AIR FLOW Mating connector and terminal of CN1 Connector Mating connector CN1 S3B-XH-A XHP-3 Terminal Reel : SXH-001T-P0.6 Bulk : BXH-001T-P0.6 TB1 [0.49] 19 [0.75] [6] Pin connection and function of CN1 Function : Auxiliary power ground G PR : PR alarm AUX : Auxiliary power (only remote ON/OFF) 171.5 t0.5 Name plate(Top) [6.75] 152.4 t0.5 Pin No. 1 2 3 4-M4 Mounting hole(Bottom) (Bottom) CN1 12.55 [0.45] 11.5 33 [1.46] 171.5 t0.5 [6.75] [0.5] [0.08] 37 4-M4 Mounting hole 254 [10] 12.75 (Top) 2 38 t0.5 [6.99] 156.5 [6.16] 116.5 [4.59] [1.5] 177.5 Mfr. J.S.T. Tolerance : t1 [t0.04] Weight : 3kg max PCB Material/thickness : FR-4 / 1.6mm [0.06] 4-M4 Mounting hole 171.5 t0.5 [6.75] 19 14.5 SLOT1 TB2 [0.75] [0.57] 38 t0.5 [1.5] ]=inches [0.5] Dimensions in mm, [ 12.75 Chassis material : Aluminium Mounting torque : 1.2N * m (12.8kgf * cm) max Screw tighting torque M4 : 1.6N * m (16.9kgf * cm) max M3 : 0.8N * m (8.5kgf * cm) max ACE-5 ACE ACE series Output module and connector pin assign 1.Output side view ACE300F Output side view ACE450F/650F Output side view (Top) (Top) 8 23.8 23.8 23.8 8.2 23.8 23.8 23.8 23.8 [0.31] [0.94] [0.94] [0.94] [0.32] [0.94] [0.94] [0.94] [0.94] 3 2 3 SLOT 2 4 5 1 4 SLOT 1 ACE900F Output side view (Top) 33.6 10 8.6 [1.32] [0.39] [0.34] 6.9 [0.27] TB1 36.4 23.8 23.8 23.8 23.8 23.8 [1.43] [0.94] [0.94] [0.94] [0.94] [0.94] 6 5 4 3 2 20 M4 [0.79] 1 Tolerance : 1[0.04] Dimensions in mm, [ ]=inches SLOT 2.Output module side view and connector pin assign [0.24] CN2 12 [0.47] [2.15] 6.12 -V +V -V CN2 [1.16] CN2 COM [1.12] 28.5 [1.16] -V M4 +V [2.15] 7.62 7.62 [0.3] [0.3] +V 54.5 [0.41] 10.5 [0.47] 12 54.5 [2.15] [0.24] M3 M4 29.5 Output voltage adjustable potentiometer 6.2 54.5 ACE Output voltage adjustable potentiometer 6.2 29.5 [0.24] Output voltage adjustable potentiometer [0.24] 6.2 7.6 7.6 7.6 11.9 11.9 [0.3] [0.3] [0.3] [0.47] [0.47] Module : A-K,L,M,N,P,R 6.2 [0.24] Module : Y,W,Z,9,Q,V VR1 Output voltage adjustable potentiometer for V1 Module : 2A-2K Terminal in detail (Module S,T,U) M3 12 [2.15] 30 Module : S,T,U ACE-6 +V1 +V2 +V1 -V1 -V2 -V1 -V2 13 [1.18] [0.51] 54.5 [0.47] +V2 CN2(Remote ON/OFF) VR2 Output voltage adjustable potentiometer for V2 6.4 8.5 [0.25] [0.33] Tolerance : 1[0.04] Dimensions in mm, [ ]=inches ACE series Output module and connector pin assign CN2 connector pin assign except module S,T,U Mating connector and terminal of CN2 in Output Module Connector Mating connector Terminal Mfr. Chain : SPHD-002T-P0.5 J.S.T. S10B-PHDSS PHDR-10VS Loose : BPHD-001T-P0.5 CN2 BPHD-002T-P0.5 *1 *1 Please consult J.S.T for a non-standard crimping tool. CN2 Pin No. 1 2 3 4 5 6 1 3 579 2 4 6 8 10 7 8 9 10 The housing for the remote sensing unused is mounted on CN2 of each output module(applying module : A - K,2A - 2K). Pin connection and function of CN2 in Output Module Function Applying module : A - K,2A - 2K Applying module : L,M,N,P,R,Y,W,Z,9,Q,V RC+ : Remote ON/OFF + RC+ : Remote ON/OFF + RC- : Remote ON/OFF RC- : Remote ON/OFF N/C : N.C. N/C : N.C. N/C : N.C. N/C : N.C. LV+ : LV alarm LV+ : LV alarm LV- : LV alarm ground LV- : LV alarm ground +M : Self sensing terminal. (Do not wire for external connection.) N/C : N.C. N/C : N.C. +S : + Remote sensing -M : Self sensing terminal. (Do not wire for external connection.) N/C : N.C. N/C : N.C. -S : - Remote sensing CN2 connector pin assign of module S,T,U Mating connector and terminal of CN2 in Output Module Connector Mating connector Terminal Chain:SPH-002T-P0.5S CN2 S2B-PH-K-S PHR-2 Loose:BPH-002T-P0.5S PCB CN2 1 2 VR2 Mfr. J.S.T. ACE Pin connection and function of CN2 in Output Module Pin No. 1 2 Function Remote ON/OFF + Remote ON/OFF - ACE-7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cosel: AC3-2HET-00 AC3-2JMW-00 AC3-IZMM-00 AC3-KMZD-00 AC3-MERR-00 AC3-MMBA-00 AC9-ZNCH2H-02 AC9-ZNKKKK-00-H AC9-TK2D2H-00 AC9-TQ2J2J-00-FGW AC9-VEKKKK-00 AC9-WY2H2B-00 AC9-Z2J2JK-04-K AC9-ZDUUHH-00-01 AC9-NP2H2H-00 AC9-O2EJJJ-00 AC9-ORMW2K-00-H AC9-PPCH2H-00 AC9-PWMH2H-00 AC9-R9HVWM-00-CU AC9-HV2J2J-02 AC9-MB2D2D-02-T AC9-MH2H2H-00-02 AC9-MN2H2H-00-02 AC9MVHF2F-00 AC9-NN2H2H-00 AC9-DDDDDD-00-1B AC9-E2HHKK-04 AC9-EE2C2C-02-10 AC9-HEEKKK-03-H AC9-HHHHHH-1B AC9-HS2D2D-02 AC9-9VMH2H-02 AC9-9Z2H2H-02-W AC9-BCDDNH-00 AC9-BE2E2E-00H02K AC9-CC2C2B-08-CT AC9-CCCC2C-02-08CT AC9-2H2H2H-00-G AC9-2H2H2H-0A-H AC9-2H2H2H-0A-HK AC9-2J2J2J-00 AC9-2K2K2K-00 AC9-999999-00 AC9-2A2A2A-0A AC9-2D2D2E-08-CT AC9-2E2EEH-00 AC92EECBO-00-H AC9-2H2F2F-00 AC9-2H2H2H-00 AC6-PPNHC-00 AC6-RMF2B-00 AC6-TEC2C-02 AC6-THC2D-00 AC6-ZBC2H-00 AC6-ZFF2D-00 AC6-OGGGG-00-F AC6-OGGGG-07 AC6-OHHHH-00-F AC6-OJJJJ-00-F AC6OME2H-00-HG AC6-OZW2C-00 AC6-O2J2J-00 AC6-OEC2H-00 AC6-OEE2C-00 AC6-OEE2H-00 AC6-OFF2F-06CT AC6-OFF2J-00-EFW AC6-O2G2G-02-CT AC6-O2H2E-00 AC6-O2H2H-00 AC6-O2H2H-00-C AC6-O2H2K-00 AC6-O2H2K-00-C AC6-MZE2H-00 AC6-NEM2C-00 AC6-O2C2C-02-R AC6-O2E2E-00-02 AC6-O2E2E-00-H02 AC6-O2E2E-02 AC6-IEE2C-00 AC6-JJJJJ-00 AC6-K2H2H-00 AC6-KKKKK-00 AC6-L2K2K-00-F AC6-MEJ2H-00-C AC6-EC92H-00-EFW AC6-EEEEE-00 AC6-FFC2C-02 AC6-FFFFF-00 AC6-GGGGG-00 AC6-HHHHH-00 AC4RPP2C-00 AC4-WNCB9-00 AC6-2H2JK-00 AC6-CCCCC-00 AC6-E2E2C-08-HG AC6-E2E2C-08-HGW AC4OVE2C-00 AC4-OYE2E-02