Advanced Power TOPLED Enhanced ThinFilm LED Lead (Pb) Free Product - RoHS Compliant LA G6SP, LR G6SP, LY G6SP Vorlaufige Daten / Preliminary Data Besondere Merkmale * Gehausetyp: weies P-LCC-6 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute bei geringem Platzbedarf * Wellenlange: 625 nm (rot), 617 nm (amber), 590 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP Dunnfilm * optischer Wirkungsgrad: 74 lm/W (amber), 56 lm/W (rot), 44 lm/W (gelb) * Gruppierungsparameter: Lichtstarke, Wellenlange, Durchflussspannung * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12 mm Gurt mit 1000/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 12 Features * package: white P-LCC-6 package, colorless clear resin * feature of the device: point lightsource with high luminous efficiency and low space * wavelength: 625 nm (red), 617 nm (amber), 590 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP ThinFilm(R) * optical efficiency: 74 lm/W (amber), 56 lm/W (red), 44 lm/W (yellow) * grouping parameter: luminous intensity, wavelength, forward voltage * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 1000/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 12 Anwendungen * Verkehrssignale * Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich, z. B. Instrumentenbeleuchtung, Heckleuchte * Ersatz von Kleinst-Gluhlampen * Tragbare Beleuchtung z. B. am Fahrrad * Dekorative Lichtleiter-Anwendungen * Signal- und Symbolleuchten zur Orientierung * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Fassadenbeleuchtung im Innen- und Auenbereich Applications * traffic signaling * backlighting (illuminated advertising, general lighting) * Interior and exterior automotive lighting e.g. dashboard backlighting, rear combination lamp (RCL) * substitution of micro incandescent lamps * portable light souce (e. g. bicycle) * decorative and entertainment lighting (incl. fiber optic illumination) * signal and symbol luminaire for orientation * marker lights (e.g. steps, exit ways, etc.) * indoor and outdoor commercial and residential architectural lighting 2010-09-16 1 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Bestellinformation fur Standardselektion Ordering Indormation for Standard Selection Emissionsfarbe Color of Emission Lichtstarke2) Seite 18 Lichtstrom1) Seite 18 Bestellnummer Luminous Intensity2) page 18 IF = 140 mA IV (mcd) Luminous Flux1) page 18 IF = 140 mA V (mlm) Ordering Code LA G6SP-DAEB-24-1 amber 4500 ... 11200 21200 (typ.) Q65111A0336 LR G6SP-CBEA-1-1 red 3550 ... 9000 17000 (typ.) Q65111A0536 LY G6SP-CADB-36-1 yellow 2800 ... 7100 13400 (typ.) Q65110A4721 Typ Type Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA G6SP-DAEB-24-1 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen DA, DB, EA oder EB enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA G6SP-DAEB-24-1 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3 oder -4 enthalten ist (siehe Seite 6 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LA G6SP-DEAEB-24-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3A, -3B, -4A oder -4B enthalten (siehe Seite 6 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA G6SP-DAEB-24-1 means that only one group DA, DB, EA or EB will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA G6SP-DAEB-24-1 means that only 1 wavelength group -2, -3 or -4 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 6 for explanation). In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LA G6SP-DAEB-24-1 means that only 1 forward voltage group -3A, -3B, -4A or -4B will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 6 for explanation). . 2010-09-16 2 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Bestellinformation fur Stop-Bremslicht-Selektion Ordering Information for Stop / Tail light Selection Typ Emissionsfarbe Type Color of Emission Lichtstarke2) Seite 18 Bestellnummer Luminous Intensity2) page 18 LA G6SP-S2U1-1-1 +DW-24-1 Anm.: amber IF = 10 mA V (mcd) IF = 140 mA V (mcd) 224 ... 560 4500 ... 7100 Ordering Code Q65110A7944 Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt und Gruppierungsstrom geliefert. Z.B.: LA G6SP-S2U1-1-1+DW-24-1 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen S2, T1, T2 oder U1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA G6SP-S2U1-1-1+DW-24-1 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist. (siehe Seite 6 fur nahere Information). LA G6SP-S2U1-1-1+DW-24-1 bedeutet, dass das Bauteil innerhalb der auf Seite 6 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt und Gruppierungsstrom wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LA G6SP-S2U1-1-1+DW-24-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3A, -3B, -4A oder -4B enthalten (siehe Seite 6 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel and grouping current (there will be no mixing of two groups on each reel). E.g. LA G6SP-S2U1-1-1+DW-24-1 means that only one group S2, T1, T2 or U1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA G6SP-S2U1-1-1+DW-24-1 means that only 1 wavelength group -2, -3 or -4 will be shippable. (see page 6 for explanation). LA G6SP-S2U1-1-1+DW-24-1 means that the device will be shiped within the specified limits as stated on page 6. In order to ensure availability, single wavelength groups will not be orderable. In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel and grouping current. E.g. LA G6SP-S2U1-1-1+DW-24-1 means that only 1 forward voltage group -3A, -3B, -4A or -4Bwill be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 6 for explanation) 2010-09-16 3 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Grenzwerte Maximum Ratings (TA=25C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj >150 for short term applications C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 200 mA Stostrom Surge current t 10 s, D = 0.1; TA=25C IFM 1000 mA Sperrspannung3) Seite 18 Reverse voltage3) page 18 (TA=25C) VR not designed for reverse operation V Leistungsaufnahme Power consumption (TA=25C) Ptot 560 mW Rth JA 110 K/W Rth JS 60 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 17 Junction/ambient4) page 17 Sperrschicht/Lotpad Junction/solder point * 2010-09-16 4 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 140 mA Dominantwellenlange5) Seite 18 Dominant wavelength5) page 18 IF = 140 mA Symbol Symbol Werte Values Einheit Unit red amber yellow (typ.) peak 632 624 594 nm (min.) (typ.) (max.) dom dom dom 620 625* 629 612 617* 624 583 590* 595 nm nm nm Spektrale Bandbreite bei 50 % rel max Spectral bandwidth at 50 % rel max IF = 140 mA (typ.) 18 18 18 nm Abstrahlwinkel bei 50 % V (Vollwinkel) Viewing angle at 50 % V (typ.) 2 120 120 120 Grad deg. Durchlassspannung6) Seite 18 Forward voltage6) page 18 IF = 140 mA (min.) (typ.) (max.) VF VF VF 1.90* 2.1 2.65 1.90* 2.1 2.65 2.05* 2.2 2.65 V V V Sperrstrom3) Seite 18 Reverse current3) page 18 (max.) IR IR not designed for reverse operation Temperaturkoeffizient von peak Temperature coefficient of peak IF = 140 mA; -10C T 100C (typ.) TCpeak 0.15 0.15 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 140 mA; -10C T 100C (typ.) TCdom 0.07 0.08 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 140 mA; -10C T 100C (typ.) TCV -2.5 -2.5 -2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 140 mA (typ.) opt 50 62 32 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2010-09-16 5 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Wellenlangengruppen fur Standardselektion (Dominantwellenlange)5) Seite 18 Wavelength Groups for Standard Selection (Dominant Wavelength)5) page 18) Gruppe Group amber amber min. max. 2 612 616 3 616 4 620 gelb yellow Einheit Unit min. max. 620 583 586 nm 624 586 589 nm 5 589 592 6 592 nm 595 5)Seite 18 Wellenlangengruppen fur Stop-Bremslicht-Selektion (Dominantwellenlange) Wavelength Groups for Stop / Tail light Selection (Dominant Wavelength)5) page 18 Gruppe Group Einheit Unit amber @140 mA min. max. 2 612 616 nm 3 616 620 nm 4 620 624 nm Durchlassspannungsgruppen fur Standardselektion6) Seite 18 Forward Voltage Groups for Standard Selection6) page 18 Gruppe Group rot / amber red / amber min. max. 3A 1.90 2.05 3B 2.05 4A gelb yellow Einheit Unit min. max. 2.20 2.05 2.20 V 2.20 2.35 2.20 2.35 V 4B 2.35 2.50 2.35 2.50 V 5A 2.50 2.65 2.50 2.65 V V Durchlassspannungsgruppen fur Stop-Bremslicht-Selektion6) Seite 18 Forward Voltage Groups for Stop / Tail light Selection6) page 18 Gruppe Group correlation amber @10 mA (selection for stop/tail application only) min. max. 2A 1.60 1.75 2B 1.75 1.90 amber @140 mA min. Einheit Unit max. V V 3A 1.90 2.05 V 3B 2.05 2.20 V 4A 2.20 2.35 V 4B 2.35 2.50 V 2010-09-16 6 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Helligkeits-Gruppierungsschema fur Standardselektion Brightness Groups for Standard Selection Lichtstarke2) Seite 18 Luminous Intensity2) page 18 IV (mcd) Helligkeitsgruppe Brightness Group CA CB DA DB EA EB Anm.: Note: 2800 ... 3550 ... 4500 ... 5600 ... 7100 ... 9000 ... 3550 4500 5600 7100 9000 11200 Lichtstrom1) Seite 18 Luminous Flux1) page 18 V (mlm) 9500 12000 15000 19000 24000 30300 (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a family group of 4 individual brightness groups. Individual brightness groups cannot be ordered. Helligkeits-Gruppierungsschema fur Stop-Bremslicht-Selektion Brightness Groups for Stop / Tail light Selection Helligkeitsgruppe Brightness Group Lichtstarke Lichtstrom 2) Seite 16 1) Seite 16 Luminous Intensity2) page 16 V (mcd) Luminous Flux1) Helligkeitsgruppe Brightness Group page 16 V (mlm) amber @10 mA S2 T1 T2 U1 Anm.: Note: 224 ... 280 ... 355 ... 450 ... 280 355 450 560 Lichtstarke Lichtstrom 2) Seite 16 1) Seite 16 Luminous Intensity2) page 16 V (mcd) Luminous Flux1) page 16 V (mlm) amber @140 mA 760 (typ.) 960(typ.) 1200 (typ.) 1500(typ.) DW 4500 ... 7100 17400 (typ.) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a family group of a few individual brightness groups. Individual brightness groups cannot be ordered. 2010-09-16 7 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Gruppenbezeichnung auf Etikett fur Standardselektion Group Name on Label for Standard Selection Beispiel: DA-3-4A Example: DA-3-4A Helligkeitsgruppe Brightness Group Wellenlangengruppe Wavelength Group Durchlassspannungsgruppe Forward Voltage Group DA 3 4A Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. Gruppenbezeichnung auf Etikett fur Stop-Bremslicht-Selektion Group Name on Label for Stop / Tail light Selection Beispiel: S2-2A + DW-3-3A Example: S2-2A + DW-3-3A Helligkeitsgruppe Brightness Group Durchlassspannu Helligkeitsgruppe ng Brightness Group Forward Voltage Wellenlange Wavelength amber @10 mA S2 Anm.: Note: 2A amber @140 mA DW 3 In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection. 2010-09-16 Durchlassspannung Forward Voltage 8 3A Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Relative spektrale Emission2) Seite 18 Relative Spectral Emission2) page 18 V() = spektrale Augenempfindlichkeit / Standard eye response curve rel = f (); TA = 25 C; IF = 140 mA OHL01701 100 % rel 80 V 60 yellow amber red 40 20 0 400 450 500 550 600 650 700 nm Abstrahlcharakteristik2) Seite 18 Radiation Characteristic2) page 18 rel = f (); TA=25C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2010-09-16 0.8 0.6 0.4 0 20 9 40 60 80 100 120 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Durchlassstrom2) Seite 18 Forward Current2) page 18 IF = f (VF); TA = 25 C IF Relativer Lichtfluss2)7) Seite 18 Relative Luminous Flux2) 7) page 18 V/V(grouping current) = f (IF); TA = 25 C OHL02740 10 3 mA OHL03817 10 2 5 5 10 1 IV IV (grouping current) 10 2 5 1.9 2.1 2.3 2.5 10 0 5 IV / IV (140 mA) 10 -1 yellow amber, red 10 1 1.7 IV / IV (10 mA) 5 5 10 -2 10 1 2.7 V 2.9 5 10 2 VF IF Relative Spannung2) Seite 18 Relative Voltage2) page 18 VF = f (Tj); IF = 140 mA 0.25 V mA 10 3 Relativer Lichtstrom2) Seite 18 Relative Luminous Flux2) page 18 V/V(25 C)= f (Tj); IF = 140 mA OHL02667 OHL02739 2.5 IV VF IV (25 C) 2.0 0.15 yellow 0.1 1.5 0.05 0 1.0 amber red -0.05 -0.1 0.5 -0.15 -0.2 -60 -40 -20 0 0 -60 -40 -20 0 20 40 60 C 100 Tj 2010-09-16 20 40 60 C 100 Tj 10 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T) IF Exemplarische durchschnittliche Lebensdauer fur mittlere Helligkeitsgruppe2) Seite 17 Exemplary median Lifetime2) page 17 for median Brightness Group OHL02180 250 mA 200 TA TS 150 100 50 TA temp. ambient TS temp. solder point 0 0 20 40 60 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C 1.2 IF A OHL01184 t 1.0 IF = 100 mA TA = 25C 50.000 Betriebsstunden operating hours IF = 140 mA TA = 85C 10.000 Betriebsstunden operating hours IF = 140 mA TS = 125C TJ = 150C 7.000* Betriebsstunden operating hours IF = 140 mA TS = 150C TJ = 175C 500* Betriebsstunden operating hours 1.2 IF A IF T 0.6 0.4 t D = TP tP IF T D= 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 0.8 0.6 0.4 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 0.2 0.2 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2010-09-16 OHL01185 1.0 D= 0.8 Unit Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C tP D = TP Einheit *The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures. The median lifetime depends on the application C 120 80 Bedingungen mittlere Lebensdauer Conditions median Lifetime 11 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Mazeichnung8) Seite 18 Package Outlines8) page 18 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 40 mg Gurtung / Polaritat und Lage8) Seite 18 Verpackungseinheit 1000/Rolle, o180 mm Method of Taping / Polarity and Orientation8) page 18 Packing unit 1000/reel, o180 mm 2010-09-16 12 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Empfohlenes Lotpaddesign8) 9) Seite 18 Recommended Solder Pad8) 9) page 18 Reflow Loten Reflow Soldering 0.8 (0.031) min 9 mm 2 per anode pad for improved heat dissipation 4.7 (0.185) C A 1.4 (0.055) A A A 0.8 (0.031) Package marking 0.35 (0.014) 0.35 (0.014) 0.6 (0.024) Lotstopplack Solder resist Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 2010-09-16 13 OHLPY925 Package marking Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t 9) Seite 18 Wellenloten (TTW) TTW Soldering9) page 18 (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2010-09-16 14 s 250 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT pl (6P) BATCH NO: Batch Number Bar Code (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel Additional TEXT DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 330 (13) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2010-09-16 15 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE l k, If see labe code blan bar ). (RH . RH idity hum 0% e tive d C/6 kag rela are 30 s _ < infr pac IVE RS of TO rs 90% to ak tain SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time . or 23 time at t will l with or fact entC) . MO Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el e cod , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou DE unt Afte Ind 4 uire refl is red req 2. bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo Barcode label N O TI U A C 1. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ P- Mu rs D/C : 01 to uc nd 00 (9D ) 4 co 20 NO : 23 O SR mi AM H1 Se BA TC H 3G (6P ) LO T (1T ) NO : 8 P- 1+ Q- 1 R1 lti LS TO Y T6 PL 76 DE MY (X) PR OD 5 14 2 110 0 (Q) QT Y: O pt o 998 021 210 (G) AM 99 8 D/C : 01 21 00 (9D ) 00 SR 21 : 4 20 23 O (6P ) (X) PR OD O NO : (1T ) 11 00 LO T 14 2 5 NO : 12 3G BA TC H H1 (Q) QT Y: Se SR m A ico M nd O uc pt to o rs NO 44 Mu 44 ). NO : 12 see labe N ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: TIO GR OU P: U Muster A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim h C e ThISTSE pro < tory tim . or t wit 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope se Mo see 3 istu is or . sea is Mo nk, bef istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag bla hin ingCa TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo unt DE Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic b) ned Flo or Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label 2010-09-16 16 OHA02044 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Revision History: 2010-09-16 Previous Version: 2010-08-30 Page Subjects (changes since last revision) Date of change 9 Package Outlines 2006-10-30 8 Lifetime table 2006-11-10 3 Junction temperature 2006-11-13 1, 11 Infonote OS_IN_2007-016 2007-07-31 all Dual binning for Stop/Tail Light applications added 2008-04-30 17 laser warning removed; new classification regarding CIE S009/E:2002 ("photobiological safety of lamps and lamp systems")IEC 62471 (1st edition 2006-07). 2008-04-30 10 OS-IN-2008-014 2008-09-22 12 Approx. weight updated 2009-03-26 12 Package Outlines and Method of Taping / Polarity and Orientation updated 2009-09-02 1, 12 Additional information 2010-02-25 2 Ordering code (yellow) updated 2010-06-09 2 Ordering code (amber, red) updated 2010-08-30 1 Optical efficiency updated 2010-08-30 12 Diagram Method of Taping" corrected 2010-09-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 18 may only be used in life-support devices or systems11) page 18 with the express written approval of OSRAM OS. 2010-09-16 17 Vorlaufige Daten / Preliminary Data LR G6SP, LA G6SP, LY G6SP Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische technische oder abgeleitete Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen oder abgeleiteten Werten unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board Metallkernplatine, Flache 950 mm pro LED. Fur weitere Informationen siehe Applikationsschrift im Internet www.osram-os.com. 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,05 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1. 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause halt TTW-Lothitze aus nach CECC 00802. Das Gehause ist auf Grund der Beinchengeometrie nicht fur TTW-Loten empfohlen, da sich Lotbrucken bilden konnen. 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1.) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Due to the special conditions of the manufacturing processes of LED, the typical or calculated data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical or calculated data of the typical characeristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board - metall core PCB, area of 950 mm per LED. For further information please find the application note on our web site www.osram-os.com. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.05 V. 4) 5) 6) 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802. The package is not recommended for TTW soldering because a short cut between the contacts can occure. A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2010-09-16 2) 18 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.