ABFT
|||||||||||| | | |
STANDARD SPECIFICATIONS:
FEATURES: APPLICATIONS:
Pb
RoHS
Compliant
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 03.01.12
Visit
www.abracon.com
for Terms & Conditions of Sale
5x7x2 mm SMT, RoHS Compliant reflow-able package
Frequency translation to either 20MHz or 40MHz carrier @ +3.3V Supply Voltage
Industrial operating temperature range (-40ºC to +85ºC)
LVCMOS Output
Internal absolute pull range > ±100 ppm allowing for long term drift correction
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Frequency Translator / Jitter Attenuator
Frequency translation, clock smoothing and jitter attenuation of the input
10MHz reference
Datacom - DSLAM, DSLAR, Access Nodes
Cable modem head end
Base Station - GSM, CDMA
Telecom - SONET/SDH/ATM
GENERAL DESCRIPTION
The ABFT series is an Ultra Low Jitter VCXO based frequency translator; ideally suited to improve Jitter characteristics of the input signal. This device is
designed to provide input clock smoothing - while providing Phase and Frequency Locked higher frequency translated output.
Typical application will take a 10MHz reference frequency and phase & frequency lock it to either a 20MHz or a 40MHz Low Jitter VCXO. The implemented
technology significantly attenuates the jitter content of the 10MHz reference signal; while keeping the higher frequency RF Output - Frequency and Phase
Coherent with the input 10MHz reference signal.
Parameters
Minimum
Typical
Maximum
Units
Notes
Resonant Frequency
20.000
Or
40.00
MHz See options
Operating Temperature
-40
+85
°C
Storage Temperature
-40
+85
°C
Supply Voltage (Vdd)
3.135
3.3
3.465
V
3.3V±5%
Input Signal Characteristics
Frequency
Signal level
9.999800
0.300
10.000000 10.000200
3.3
MHz
Vp-p
Input signal must be
with-in ±20.00 ppm
from 10.00MHz
carrier for the ABFT
device to achieve lock
Lock Time
< 20
50
ms
Frequency Stability Over Temperature
(Note # 1)
-25.00 +25.00 ppb
Referenced to the
stable input reference
of 10.00MHz (such as
a Stratum-III TCXO
or an OCXO)
Internal Frequency Pull Range ±100.00 ppm
This is the internal
pull range of the
ABFT device
providing sufficient
correction range to
account for internal
aging, stand-alone
temperature variation,
etc.
Supply Current (I
DD
)
< 14.0
20.00
mA
Under Lock
RF output Characteristics
Output Load:
Rise Time (Tr)
Fall Time (Tf)
Symmetry
Output Voltage ( VOH)
Output Voltage ( VOL)
45
0.9*Vdd
853
526
48/52
15||10
1200
1200
55
0.1*Vdd
pF||k
ps
ps
%
V
V
@1/2Vdd
Stand alone Aging (Note # 2)
-5.0
+5.0
ppm
@+25°C First year
-12.0 +12.0
@+25°C After 10
years
(Note # 1):The frequency stability over temperature of the ABFT device is greatly dependant on the short term perturbations of the input reference signal.
(Note # 2):The Aging characteristics of the Quartz used inside the ABFT solution are such that, the stand-alone aging will not exceed ±12.00 ppm over a
10-year product life; referenced to the initial measured frequency post reflow in end application
5.00 x 7.00 x 2.0mm
Moisture Sensitivity Level (MSL)–This product is not Moisture Sensitive MSL = N/A: Not Applicable
ABFT
|||||||||||| | | |
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 03.01.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Frequency Translator / Jitter Attenuator
5.00 x 7.00 x 2.0mm
Parameters
Minimum
Typical
Maximum
Notes
Phase Noise @ 20MHz carrier
1Hz offset from the carrier
10Hz offset from the carrier
100Hz offset from the carrier
1,000Hz offset from the carrier
10,000Hz offset from the carrier
100,000Hz offset from the carrier
1,000,000Hz offset from the carrier
5,000,000Hz offset from the carrier
-56
-87
-113
-135
-151
-155
-156
-157
-130
-145
-150
-150
-155
dBc/Hz
Close to the carrier
phase noise is
dependent on the
cleanliness of the
input reference.
However, at 1kHz
offset and beyond,
ABFT phase noise is
practically
independent of the
input reference noise
PHASE NOISE
Phase Noise under lock (ABFT-20.00MHz with input connected to a
low noise,stable 10.00MHz Stratum-IIIreference signal)
Stratum-III 10.00MHz low Noise Reference
ABFT-20.00MHz Phase Noise under Lock
DetailedComparative Phase Noise Plot
(Stratum-III 10.0MHz as Reference)
Pb
RoHS
Compliant
10.00MHz Clock Crystal Oscillator Reference
ABFT-20.00MHz Phase Noise under Lock
ABFT
|||||||||||| | | |
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 03.01.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Frequency Translator / Jitter Attenuator
PHASE NOISE
Detailed Comparative Phase Noise Plot
(10.0MHz Clock Crystal Oscillator as Reference)
10.00MHz MEMS Oscillator Reference
ABFT-20.00MHz Phase Noise under Lock
Detail Comparative Phase Noise Plot
(10.0MHz MEMS Oscillator as Reference)
FREQUENCY TRACKING OVER TEMPERATURE
Pb
RoHS
Compliant 5.00 x 7.00 x 2.0mm
(5.0 ± 0.2) mm
ABFT
|||||||||||| | | |
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 03.01.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Frequency Translator / Jitter Attenuator
PART IDENTIFICATION
FREQUENCY TRACKING OVER TEMPERATURE
Pb
RoHS
Compliant
Or
40.000 MHz
ABFT - MHz -
Frequency in MHz
20.000 MHz
T= 1,000 unit Reel
T2 = (250) unit Reel
ALL Dimensions are in (mm)
(7.0 ± 0.2) mm
Top View
Bottom View
PIN #
Name
1
10.0MHz Reference Input
2 GND
3 Locked - Output
4
Vdd
Note:Abracon recommendsa0.01uF bypass capacitor between pin#2 andpin#4
Dimension : Inches
(mm)
Pin #1 Pin#2
Pin #4
(5.08 ± 0.20) mm
1.1 mm
1.4 mm
Pin#3
Side View
2.0 mm Max
5.00 x 7.00 x 2.0mm
ABFT
|||||||||||| | | |
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 03.01.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Frequency Translator / Jitter Attenuator
REFLOW PROFILE
Pb
RoHS
Compliant
T = Tape & Reel { (1,000) units / reel }
T2 = Tape & Reel { (250) units / reel }
Dimensions: mm
REFLOW PROFILE
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
5.00 x 7.00 x 2.0mm