3 ScotchlokTM Terminals MVU18-156DM, MVU14-156DM, MVU10-156DM S Male Snap Plug, Vinyl Insulated, Butted Seam L Data Sheet Product Number Wire Range (AWG) Mating Snap Diameter S MVU18-156DM 22-18 MVU14-156DM MVU10-156DM L Barrel Length Barrel I.D. Maximum Insulation Diameter 0.156 0.85 0.19 0.070 0.145 16-14 0.156 0.85 0.19 0.090 0.170 12-10 0.156 0.94 0.22 0.155 0.250 Installation Information WARNING UNDERWRITERS LABORATORIES STANDARD NO. UL 486A 3M FILE NO. E23438 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0, 65 3M FILE NO. LR22190 Maximum Operating Temp: Maximum Current: Insulator Material: Terminal Material: Plating: UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: Barrel Seam: Maximum Voltage Rating: Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) 221F (105C) Same as Wire Vinyl Brass Tin Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical) Engineering Specification Crimp-Type Snap Plug Connectors shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire; and have a round tongue portion for mating to a Snap Receptacle in a separable, reusable manner. The vinyl insulated 0.156 Male Snap Plug shall be tinplated 0.030 thick copper, with a tongue tapered from 0.156 diameter and a butted seam barrel covered by a molded vinyl funnel entry sleeve, color coded and sized for a specified (AWG) wire range (22-18, 16-14, 12-10). The connector line shall offer tongue variations (0.156 and 0.180 diameter) and barrel variations in wire (AWG) size (22-18, 16-14, 12-10) and construction (vinyl insulated, nylon insulated with insulation grip). The separable connectors shall have regulatory agency coverage (UL Listed, CSA Certification). Insulated separable connectors shall be UL Listed and CSA Certified for 600 V building wire: 1000 V signs or lighting fixtures (luminaires) and temperature rated 221F (105C) maximum. The separable connector formed by the paired Male Snap Plug and Female Snap Receptacle may require a suitable strain relief to prevent accidental separation. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd Litho in USA. (c) 3M 2002 78-8126-0393-0-A