MMBT2369LT1, MMBT2369ALT1 MMBT2369ALT1 is a Preferred Device Switching Transistors NPN Silicon http://onsemi.com Features * Pb-Free Packages are Available COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector -Emitter Voltage VCEO 15 Vdc Collector -Emitter Voltage VCES 40 Vdc Collector -Base Voltage VCBO 40 Vdc Emitter -Base Voltage VEBO 4.5 Vdc IC 200 mAdc Symbol Max Unit 225 1.8 mW mW/C 556 C/W 300 2.4 mW mW/C RqJA 417 C/W TJ, Tstg -55 to +150 C Collector Current - Continuous 1 BASE 2 EMITTER 3 SOT-23 CASE 318 STYLE 6 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board (Note 1) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate, (Note 2) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature 1 2 PD RqJA MARKING DIAGRAMS PD Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. xxx M G G 1 xxx = M1J or 1JA M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping SOT-23 3000/Tape & Reel MMBT2369LT1G SOT-23 (Pb-Free) 3000/Tape & Reel MMBT2369ALT1 SOT-23 3000/Tape & Reel SOT-23 (Pb-Free) 3000/Tape & Reel MMBT2369LT1 MMBT2369ALT1G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2007 January, 2007 - Rev. 5 1 Publication Order Number: MMBT2369LT1/D MMBT2369LT1, MMBT2369ALT1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max 15 - - 40 - - 40 - - 4.5 - - - - - - 0.4 30 - - 0.4 40 - 40 20 30 20 20 - - - - - - - 120 120 - - - - - - - - - - - - - - - 0.25 0.20 0.30 0.25 0.50 0.7 - - - - - - - 0.85 1.02 1.15 1.60 - - 4.0 5.0 - - - 5.0 13 - 8.0 12 - 10 18 Unit OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (Note 3) (IC = 10 mAdc, IB = 0) V(BR)CEO Collector -Emitter Breakdown Voltage (IC = 10 mAdc, VBE = 0) V(BR)CES Collector -Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO Emitter -Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 20 Vdc, IE = 0) (VCB = 20 Vdc, IE = 0, TA = 150C) Vdc Vdc Vdc Vdc mAdc ICBO Collector Cutoff Current (VCE = 20 Vdc, VBE = 0) mAdc ICES MMBT2369A ON CHARACTERISTICS DC Current Gain (Note 3) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 0.35 Vdc) (IC = 10 mAdc, VCE = 0.35 Vdc, TA = -55C) (IC = 30 mAdc, VCE = 0.4 Vdc) (IC = 100 mAdc, VCE = 2.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) MMBT2369 MMBT2369A MMBT2369A MMBT2369A MMBT2369A MMBT2369 MMBT2369A hFE Collector -Emitter Saturation Voltage (Note 3) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc, TA = +125C) (IC = 30 mAdc, IB = 3.0 mAdc) (IC = 100 mAdc, IB = 10 mAdc) MMBT2369 MMBT2369A MMBT2369A MMBT2369A MMBT2369A Base -Emitter Saturation Voltage (Note 3) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc, TA = -55C) (IC = 30 mAdc, IB = 3.0 mAdc) (IC = 100 mAdc, IB = 10 mAdc) MMBT2369A MMBT2369A MMBT2369A MMBT2369A - VCE(sat) Vdc VBE(sat) Vdc SMALL- SIGNAL CHARACTERISTICS Cobo Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Small Signal Current Gain (IC = 10 mAdc, VCE = 10 Vdc, f = 100 MHz) pF hfe - SWITCHING CHARACTERISTICS Storage Time (IB1 = IB2 = IC = 10 mAdc) ts Turn-On Time (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = 3.0 mAdc) ton Turn-Off Time (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = 3.0 mAdc, IB2 = 1.5 mAdc) toff 3. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. http://onsemi.com 2 ns ns ns MMBT2369LT1, MMBT2369ALT1 t1 +10.6 V 0 -1.5 V 3V < 1 ns 270 W 0 -9.15 V Cs* < 4 pF 3.3 k 270 W t1 +10.75 V Cs* < 4 pF 3.3 k < 1 ns PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2% PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2% *Total shunt capacitance of test jig and connectors. Figure 1. ton Circuit - 10 mA t1 +10.8 V -2 V 10 V Figure 2. toff Circuit - 10 mA 95 W t1 +11.4 V 0 -8.6 V 0 < 1 ns 1k < 1 ns PULSE WIDTH (t1) BETWEEN 10 AND 500 ms DUTY CYCLE = 2% Cs* < 12 pF 1k PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2% 95 W 10 V Cs* < 12 pF 1N916 *Total shunt capacitance of test jig and connectors. Figure 3. ton Circuit - 100 mA Figure 4. toff Circuit - 100 mA TO OSCILLOSCOPE INPUT IMPEDANCE = 50 W RISE TIME = 1 ns TURN-ON WAVEFORMS Vin 0 220 W 10% Vout ton 90% PULSE GENERATOR Vin RISE TIME < 1 ns SOURCE IMPEDANCE = 50 W PW 300 ns DUTY CYCLE < 2% Vin 0.1 mF 3.3 kW 50 W VBB +- 50 W 3.3 k 0.0023 mF 0.005 mF 0.0023 mF 0.005 mF 0.1 mF 0.1 mF 3 TURN-OFF WAVEFORMS 0 10% Vin 90% Vout +V =3V - CC Figure 5. Turn-On and Turn-Off Time Test Circuit http://onsemi.com Vout toff VBB = +12 V Vin = -15 V MMBT2369LT1, MMBT2369ALT1 100 TJ = 25C 5 LIMIT TYPICAL CAPACITANCE (pF) 4 Cib 3 Cob 2 1 0.1 0.2 0.5 1.0 2.0 REVERSE BIAS (VOLTS) 5.0 F = 10 VCC = 10 V VOB = 2 V 50 SWITCHING TIMES (nsec) 6 tr 5 ts 1 2 C td 5 10 20 IC, COLLECTOR CURRENT (mA) 50 Figure 7. Typical Switching Times Figure 6. Junction Capacitance Variations C < COPT VCC = 10 V 10 2 10 tf tr (VCC = 3 V) 20 t1 +6 V C=0 10 V 980 0 -4 V COPT < 1 ns 500 Cs* < 3 pF PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2% TIME Figure 8. Turn-Off Waveform Figure 9. Storage Time Equivalent Test Circuit http://onsemi.com 4 100 VCE , MAXIMUM COLLECTOR-EMITTER VOLTAGE (VOLTS) MMBT2369LT1, MMBT2369ALT1 1.0 TJ = 25C 0.8 IC = 3 mA IC = 10 mA IC = 30 mA IC = 50 mA IC = 100 mA 0.6 0.4 0.2 0.02 0.05 0.1 0.2 0.5 1 IB, BASE CURRENT (mA) 2 5 10 20 Figure 10. Maximum Collector Saturation Voltage Characteristics TJ = 125C VCE = 1 V 75C 25C 100 TJ = 25C and 75C -15C 50 -55C 20 1 2 5 10 IC, COLLECTOR CURRENT (mA) 20 50 Figure 11. Minimum Current Gain Characteristics 1.4 V(sat) , SATURATION VOLTAGE (VOLTS) hFE , MINIMUM DC CURRENT GAIN 200 F = 10 TJ = 25C 1.2 MAX VBE(sat) 1.0 MIN VBE(sat) 0.8 0.6 0.4 0.2 MAX VCE(sat) 1 2 5 10 20 IC, COLLECTOR CURRENT (mA) 50 Figure 12. Saturation Voltage Limits http://onsemi.com 5 100 100 MMBT2369LT1, MMBT2369ALT1 PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AN NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318-01 THRU -07 AND -09 OBSOLETE, NEW STANDARD 318-08. D SEE VIEW C 3 HE E c 1 2 b DIM A A1 b c D E e L L1 HE 0.25 e q A L A1 L1 VIEW C MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT2369LT1/D