MODELS LOW NOISE +5 Vdc AMPLIFIER AM-/AMC-212 100-600 MHz GAIN: 8.0 dB Low DC Power Requirements 35 mW Typical 1.5 dB Typical Midband Noise Figure Guaranteed Specifications* (From 55C to + 85C Case Temp) Frequency Range 100-600 MHz Gain (+ 25C) @300 MHz 8.0 +0.5 dB Frequency Response +0.7 dB Max . Gain Variation + 1.0 dB Max Typical Performance with Temperature Output Power 100-600 MHz 2 dBm Min (1 dB Compression) 100-300 MHz +2 dBm Min , GAIN Noise Figure 3.0 dB Max 8 oe Reverse Transmission 9 dB Max 3 fe [rate | -11.5dBT VSWR 1 Max sO 100 200 900 409500 g8 650 Intermodulation Intercept Point (for two-tone output power up to 10 dBm) Second Order 100-600 MHz +24 dBm Min VSWR Second Order 100-300 MHz +30 dBm Min 22 Third Order 100-600 MHz +10 dBm Min 48 Third Order 4100-300 MHz +15 dBm Min z ineUr py Bias Power +5 VDC @8 mA Max 10 Se Tie =T (7 mA, 35 mW Typical) BO 100 200300400 500 0 Operating Characteristics Impedance 50 Ohms Nominal g Maximum Rating 5 RF Input + 10 dBm Max Package Type Pin (TO-8-1) e Connectorized (C-6) 90 200300400 600. 850 (See pages 472 and 481 for physical dimensions.) Environmental These units are designed to meet the environmental and screening requirements of Table 1B, page 497 of the Adams-Russell catalog. INTERMODULATION - * All specifications apply when operated at +5 VDC, with 50 ohm source and load impedance This product contains elements protected by United States Patent number 3,891,934. S-Parameters: For typical S-Parameter data, see page 99. INTERCEPT GiBm) 400. 500 eae G50 . . E 1 dB COMPRESSION Ordering Information e , ce Unit Price ; : ees ho Model No. Part No. Connectors (5-9 Units) f - AM-212 6519 Pin $111 50 100. 200 300-400 S00. gop 880 AMC-212 6514 SMA 208 FREQUENCY Ml Delivery ts from stock. A N: 7, AC Make the Connection. .. Adams AURussell 80 Cambridge Street, Burlington, MA 01803 Fax (617) 273-1921 COMPONENTS GROUP For Technical Information, Call (617) 273-3333 For Ordering Information, Call (617) 273-3333 81