PRODUCT CATALOG Military, Space and Testing Equipment Emerson Network Power Connectivity Solutions has a wide range of cable assemblies and connectors suited for RF, Microwave and Fiber Optic signal transmission. Connectivity Solutions is a vertically integrated supplier of custom, fixed length and semi-rigid cable assemblies from DC to 50 GHz. Our product lines deliver custom-engineered products and solutions to satisfy the most demanding and complex requirements. AIM-Cambridge has a universal line of products that offer cost effective, high quality solutions for connectivity. Our connectors are available in BNC, Type N, F Type, RCA, UHF, Mini-UHF, TNC, D-Sub and Modular Plugs for Data/Telecom applications. In addition, we stock a wide variety of cables for A/V, SATV, CATV, computer and LAN applications, as well as a complete line of termination tools and structured cabling products. AIM-Cambridge promises that its product will provide you with unmatched consistency, quality, reliability and ease of use. Johnson designs and manufactures an industry leading line of RF coaxial connectors and adapters, which are available in both 50 and 75 ohm versions. Johnson connectors are designed to provide the highest quality data transmission for audio, video and data applications. The Johnson line of products can address frequency ranges from DC to 46GHz and all sizes from Ultra-miniature interfaces (UMC), Micro-miniature, (MCX, MMCX, SMP), Subminiature (SMA, SMB, SMK, kwiQMAteTM), Medium connectors (Type N connectors) through to large connectors (DIN7/16). The breadth of products available within the Johnson range includes board and cable mount connectors as well as semi-rigid, conformable, and flexible RF coaxial cables. Midwest Microwave manufacturers passive coaxial microwave components that are known for their precision performance and high quality that meets the precise requirements of the RF/Microwave industry. Our broad product portfolio includes: Attenuators, Precision Adapters, Terminations, DC Blocks, Power Dividers, Couplers, Equalizers, Phase Shifters, Connectors, Custom Cable Assemblies and Test Cables that are designed and manufactured for both military and commercial applications. Midwest also offers a wide variety of Qualified Product List (QPL) approved products in the M3933, M39030 and M39012 series, as well as many DESC/DSCC approved models. Semflex designs and manufactures low loss, flexible, microwave coaxial cable and custom cable assemblies for the military/aerospace, commercial OEM and test instrumentation markets. Semflex offers cables ranging from DC to 50 GHz, available with ultra low insertion loss, power ratings up to 21 KW, and available with all popular connectors. Stratos optical connectivity products is globally recognized as highly reliable, cost-effective, and provides optical connectivity solutions that are virtually immune to dust, mud, oil, water, and other contaminants. Our expanded beam connectivity products are ideal for harsh environment applications in the broadcast, industrial, petrochemical and military/aerospace markets where high reliability, low maintenance and quick serviceability are critical requirements. Our optical active products are used mainly in military, aerospace and industrial markets where high speed/high reliable performance is mission critical. The actives product line includes optical transceivers, optical media converters and custom devices tailored to your application. Trompeter is recognized as a global leader in delivering best in class RF connectivity products. The Trompeter line of patch jacks, RF connectors, cable assemblies, HDTV digital technology and DS3 connectivity solutions is unrivalled. Our mission is to provide products that continually deliver the highest quality signal integrity for the most demanding applications in Telecom, Central Office, Broadcast, Military Aerospace, and Instrumentation markets worldwide. Our extensive line of costeffective products are rigorously designed and tested to provide the critically engineered solutions necessary to enhance the end-user's overall experience. Vitelec provides a comprehensive range of RF coaxial interconnect products and cable assemblies. The company has a long established reputation for offering quality and innovation with a wide range of both standard and custom designed products for the electronic and communication industries. Contents twinax/triax connectors Mil-Std-1553B Data Bus General Specifications Guide 2-3 70/370 SERIES MIL-C-49142 QPL'd Connectors TRB/TRT Miniature Plugs & Jacks TRB/TRT Miniature Bulkhead Jacks Miniature Circuit Board Jacks TRB Series Pad, Paralleling Jacks, & T Adapter Twinax/Triax Terminations & RFI Caps Miniature Twinax/Triax Patching Miniature Twinax/Triax Normal-Thru Patch Jacks Subminiature Twinax/Triax Patching Standard & Subminiature Twinax/Triax Looping Plugs Hermetically Sealed Connectors Mating Twinax Size 8 Contacts 5 6 7 8 9 10 11-12 13 14 15 16 17 150/3150 SERIES TRS/TTM Subminiature Jacks and Plugs TRS/TTM Subminiature Bulkhead Jacks Subminiature Bulkhead Jacks, Adapters, & Push-on 18 19-20 20 450 SERIES Concentric Twinax Connectors 21-23 TPS/TCM Subminiature Coax Threaded Jacks & Plugs 80/380 SERIES TRC/TRN Standard Twinax/Triax Threaded 24 30/330 SERIES TWBNC/TWTNC, Two-pin Polarized Connectors 25 Coax Connectors 26 20/220 SERIES Miniature Coax BNC Plugs & Jacks Miniature Coax BNC Bulkhead Jacks Coax Circuit Board Jacks 130 Series Coax F Type Connectors Low VSWR Coax Connectors 27 28 29-31 250 SERIES Mini-BNC Coax Plugs & Jacks 32 40/240 SERIES TNC Miniature Coax Threaded TNC Bulkhead Jacks, Miniature Coax Threaded 33 34 120 SERIES BNC/TNC Miniature Push-on Jacks & Plugs 35 1.0/2.3 DIN CONNECTORS 36 1.6/5.6 DIN CONNECTORS Miniature Coax DIN Connectors Coaxial Ground Filter Bulkhead Jacks 37 37 TYPE N CONNECTORS 90 Series Coax Type N Connectors 38 39-40 41 42 Patching Products High Frequency Video Patching Coax Patch Jacks & Accessories Mini-WECo Coax Patch Plugs Mini-WECo Coax Patch Jacks Standard Coax Patching & Looping 50 Miniature Coax Patching Panel Specifications Distribution Panels Standard/Miniature Panels "D" Mounting Hole Specifications 43-44 45-46 47 48 49 50 51 52 53-54 54 CUSTOM CABLE ASSEMBLIES 55-56 TERMINATIONS & RFI CAPS Coax Terminations & RFI Caps Chain Options Stainless Steel Rope for "D" Ring Option ADAPTERS (CUSTOM AND STANDARD) Adapter Circuitry Schematics Coax to Coax Adapter Table Coax/Twinax/Triax Adapter Table 57 57 57 58 59 60-61 Tools & Accessories Cable Strippers Crimp Tools Cable Assembly Testers Tool Kit/Bulk Packaging 62 63 64 65 Appendix Trompeter Cable Specifications Twinax/Triax: Plenum/Halogen Free Cable Specs Connector Compatibility Table General Material/ Finish Specifications BNC Coax Tool/Wrench Crimp Assembly Illustrations Cable Group Table Notes Cable Group Tables 66-68 68 69-70 71 72 73 74-91 INDEX Part Number Index Terms & Conditions 93-95 96-97 1 TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Specifications Trompeter offers a broad line of connectors manufactured to meet or exceed the Mil-Specs governing twinax connectors. In fact, Mil-PRF-49142 was created from the Trompeter concentric twinax/triax connector design. The following information reflects the specification requirements for each family of connectors in both twinax and triax applications. Use this chart to determine the proper connector type to be used in your application, based on the environment and electrical requirements of your design. Trompeter's technical support team is available to answer any specification questions you may have. MIL-Spec Triax Series Trompeter Connector Series Bayonet Typical Lug Count Available Threaded Gender Equivalent Coax Series TRB 70 3 Yes Normal BNC TRC 80 2 Yes Reverse N TRS 150 3 Yes Normal M-BNC 1553 450 3 Yes Either n/a The following is the latest list from the MIL-STD-1553B supply: Trompeter Number: PL75-47 PL375C-201 PL75C-201 PL155AC-201 PL3155AC-201 PL155AC-201 PL155AC-201 PL3455ACS-201 PL455ACP-201 MIL-STD-1553B Data Bus General Specifications Guide Characteristic Requirements 70 Series TRB/TRT 80 Series TRC/TRN 150 Series TRS/TTM 450 Series TCS Nominal Impedance Non-constant Non-constant Non-constant Non-constant Frequency Range 0-500 MHz 0-500 MHz 0-500 MHz 0-2 MHz Voltage Rating (max.) @ sea level 400 VRMS 500 VRMS 400 VRMS 900 VRMS Voltage Rating (max.) @ 70,000 ft. 100 VRMS 125 VRMS 100 VRMS N/A Insulation Resistance 5000 M 5000 M 5000 M 5000 M Dielectric Withstanding Voltage (between center cond. & inter. cond.) 1200 VRMS 1500 VRMS 1200 VRMS 900 VAC Dielectric Withstanding Voltage (between inter. cond. & outer cond.) 500 VRMS 500 VRMS 500 VRMS 900 VAC RF High Potential Withstanding Voltage 800 VRMS 1000 VRMS 500 VRMS (between center cond. & inter. cond.) 900 VAC @ 60 Hz RF High Potential Withstanding Voltage (between inter. & outer cond.) N/A 200 VRMS @ 5-7.5 MHz 350 VRMS @ 5-7.5 MHz Specifications continued on page 3... * Specifications are minimum unless otherwise stated. Trompeter connectors are designed to exceed all minimum specifications. 2 125 VRMS Twinax/Triax Connectors / Specifications 3 MIL-STD-1553B Data Bus General Specifications Guide (cont'd) 70 Series TRB/TRT 80 Series TRC/TRN 150 Series TRS/TTM 450 Series TCS Corona Level (min.) 200 VRMS @ 70,000 ft. 375 VRMS @ 70,000 ft. 125 VRMS @ 70,000 ft. 250 VAC @ 50,000 ft. Rise Time Degradation (max.) 400 rs N/A 800 ps 800 ps Permeability of Nonmagnetic Material <2.0 mu except hermetic versions Hermetic Seal (Where Applicable) <1 x 10-8 cc/sec <1 x 10-6 cc/sec N/A Connector Durability 500 cycles minimum @ 12 cycles per minute max. Temperature Range -65 to +165C -65 to +165C -65 to +200C -65 to 125C Force to Engage and Disengage Longitudinal (max.) Torque (max.) 4 pounds 2.5 inch-pounds 5 pounds 4 inch-pounds 4 pounds 2.5 inch-pounds 3 pounds 2.5 inch-pounds Center Contact Retention Axial Force (min.) Plug Jack 6 pounds 6 pounds 6 pounds 6 pounds 4 pounds 2 pounds 6 pounds 6 pounds Coupling Proof Torque (Threaded types only) 15 inch-pounds 15 inch-pounds 10 inch-pounds N/A Coupling Mechanism Retention Force (min.) 100 pounds 100 pounds 70 pounds 100 pounds Cable Retention Force (min.) 40 pounds .200-.325 inch cable OD 65 pounds .242-.419 inch cable OD 40 pounds .120-.215 inch cable OD 40 pounds .120-.180 inch cable OD Characteristic Requirements Salt Spray (corrosion) N/A 48 hrs minimum exposure (Standard nickel plating) 500 hrs minimum available (Call customer service for plating types). Standard for 450 Series. Total 240 hour minimum exposure Thermal Shock (5 cycles) (No physical damage/Pass DWV) Total 5 hours 50 minutes min -65C to +85C Specified Shock (sawtooth waveform, within peak - 50g's, duration -11ms) No discontinuity allowed. Velocity-change of shock pulse 10% of ideal value Vibration, High-frequency (36 cycles) (15g peak, 10-2000 Hz-10Hz in 20 minutes) Total 12 hour minimum. No physical damage or loosening of parts. No discontinuity allowed. * Specifications are minimum unless otherwise stated. Trompeter connectors are designed to exceed all minimum specifications. -65C to +125C TWINAX/TRIAX CONNECTORS Moisture Resistance (10 cycles) TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors Built to Last Premium Quality Superior Mechanical Performance Rugged Physical Properties Extreme Reliability Signals require protection from extraneous noise through nonsignal carrying shielding. These interfacing connectors must provide contact surfaces isolated from each other, as well as from the outer shield. Trompeter twinaxial/triaxial connectors are designed with two (2) concentric contacts that are isolated from each other and the shielding connection. Features * All metallic parts are machined/formed to extremely close tolerances * All bodies are made of top quality brass with bright nickelplated non-tarnish finish * Fully enclosed, heat-treated, beryllium-copper outer conductor spring (not half hard slotted brass) * Heat-treated, beryllium-copper center socket contact with 50 millionths inch gold plating 70 Series Miniature Threaded (TRT) These concentric twinax/triax connectors are ideal for applications where weight is not a primary concern. They are commonly used in digital data bus, video pair, MIL-STD-1553B (airborne/ground, primary/redundant), base-band circuit and any application for "noise-free guarded" circuits. (70 Series shown below) Features Miniature 2, 3, 4-lug, and Push-on (TRB) 370 Series * Same size as BNC/TNC connectors. Large body versions are available to accommodate larger cables * Field serviceable, wrench crimp versions for cables with up to .475" outer diameters * Tool crimp versions for quick termination of cables with up to .250" outer diameters * 3-lug, 4-lug, and threaded versions provide different levels of mechanical stability and keying * Does not require mechanical alignment for mating. * QPL to MIL-C-49142 (see list on page 5) * Meets MIL-C-49142, 48-hour salt spray requirement * Special plating available to satisfy MIL-STD-1344, 500-hour * salt spray requirement * Push-on versions for test cable applications * Fewer pieces to assemble * Hermetically sealed versions are available (page 16) 4 Twinax/Triax Connectors / 70/370 Series Connectors Qualified Parts List (QPL) to MIL-C-49142 5 MIL-C-49142 Qualified Products List Trompeter has always been a leader in twinax connector design and development. This time we've designed a new connector style to meet the requirements of MIL-C-49142, Category G. What is Category G? It is the section of the MIL-Spec that requires tool crimping of the TRB (70) series connectors. We are also qualified to category A which is for wrench crimp TRB connectors. Below is a list of qualified Trompeter products from the Defence Electronic Supply Center (DESC). QPL parts must be ordered by the MIL-Number. Many of Trompeter's 70 Series concentric twinax connectors are QPL to MIL-C-49142. QPL versions are silver plated and can be ordered using the Government Designation part numbers listed. Corresponding standard nickel plated connectors can be ordered using the standard part numbers. Trompeter Number Mil-number Trompeter Number M49142/03-0001 M49142/03-0002 M49142/03-0005 M49142/03-0007 M49142/03-0008 M49142/03-0009 M49142/03-0011 M49142/03-0016 M49142/03-0017 M49142/03-0101 M49142/03-0102 M49142/03-0105 M49142/03-0107 M49142/03-0108 M49142/03-0109 M49142/03-0111 M49142/03-0116 M49142/03-0117 M49142/03-0201 M49142/03-0202 M49142/03-0205 M49142/03-0207 M49142/03-0208 M49142/03-0209 M49142/03-0211 M49142/03-0216 M49142/03-0217 M49142/04-0004 M49142/04-0104 M49142/04-0204 M49142/05-0001 M49142/05-0002 M49142/05-0006 M49142/05-0007 M49142/05-0008 M49142/05-0009 M49142/05-0011 M49142/05-0016 M49142/05-0017 M49142/05-0101 M49142/05-0102 M49142/05-0106 M49142/05-0107 M49142/05-0108 M49142/05-0109 M49142/05-0111 M49142/05-0116 M49142/05-0117 M49142/05-0201 M49142/05-0202 M49142/05-0206 M49142/05-0207 M49142/05-0208 M49142/05-0209 M49142/05-0211 M49142/05-0216 M49142/05-0217 PL75-7 PL75-7 305-0042-1 PL75-9 PL75-47 PL75-60 305-0811-1 PL75MC213 PL75MC-201 PL75Y-7 PL75Y-7 305-0042Y-1 PL75Y-9 PL75Y-47 PL75Y-60 305-0811Y-1 PL75MCY-213 PL75MCY-201 PL75S-7 PL75S-7 305-0042S-1 PL75S-9 PL75S-47 PL75S-60 305-0811S-1 PL75MCS-213 PL75MCS-201 BJ76 BJ76Y BJ76S BJ79-7 BJ79-7 305-0042-7 BJ79-9 BJ79-47 BJ79-60 305-0811-3 BJ79MC-213 BJ79MC-201 BJ79Y-7 BJ79Y-7 305-0042Y-7 BJ79Y-9 BJ79Y-47 BJ79Y-60 305-0811Y-3 BJ79MCY-213 BJ79MCY-201 BJ79S-7 BJ79S-7 305-0042S-7 BJ79S-9 BJ79S-47 BJ79S-60 305-0811S-3 BJ79MCS-213 BJ79MCS-201 M49142/06-0001 M49142/06-0002 M49142/06-0006 M49142/06-0007 M49142/06-0008 M49142/06-0009 M49142/06-0011 M49142/06-0016 M49142/06-0017 M49142/06-0101 M49142/06-0102 M49142/06-0106 M49142/06-0107 M49142/06-0108 M49142/06-0109 M49142/06-0111 M49142/06-0116 M49142/06-0117 M49142/06-0201 M49142/06-0202 M49142/06-0206 M49142/06-0207 M49142/06-0208 M49142/06-0209 M49142/06-0211 M49142/06-0216 M49142/06-0217 M49142/08-0001 M49142/08-0002 M49142/08-0005 M49142/08-0006 M49142/08-0008 M49142/08-0010 M49142/08-0011 M49142/08-0016 M49142/08-0017 M49142/09-0001 M49142/09-0002 M49142/09-0006 M49142/09-0007 M49142/09-0009 M49142/09-0011 M49142/09-0012 M49142/09-0016 M49142/09-0017 M49142/10-0001 M49142/11-0001 M49142/11-0002 M49142/11-0006 M49142/11-0007 M49142/11-0009 M49142/11-0011 M49142/11-0012 M49142/11-0016 M49142/11-0017 CJ70-7 CJ70-7 305-0042-4 CJ70-47 CJ70-9 CJ70-60 305-0811-2 CJ70MC-213 CJ70MC-201 CJ70Y-7 CJ70Y-7 305-0042Y-4 CJ70Y-47 CJ70Y-9 CJ70Y-60 305-0811Y-2 CJ70MCY-213 CJ70MCY-201 CJ70S-7 CJ70S-7 305-0042S-4 CJ70S-47 CJ70S-9 CJ70S-60 305-0811S-2 CJ70MCS-213 CJ70MCS-201 PL375-7 PL375-7 305-0042-9 PL375-47 PL375-60 305-0811-5 305-0486-1 PL375MC-213 PL375MC-201 BJ379-7 BJ379-7 BJ379-47 305-0042-11 BJ379-60 305-0811-7 305-0486-3 BJ379MC-213 BJ379MC-201 BJ376 CJ370-7 CJ370-7 CJ370-47 305-0042-12 CJ370-60 305-0811-6 305-0486-2 CJ370MC-213 CJ370MC-201 TWINAX/TRIAX CONNECTORS Mil-number TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Miniature Plugs & Jacks 70/370 Series, TRB/TRT Cable Plug Cable Plug Tool Crimp Military Crimp Tool 2-Lug.................................... PL74C3-Lug.................................... PL75C4-Lug.................................... PL75CFLThreaded............................... PL375C- 3-Lug.................................... PL75MC2-Lug.................................... PL74MC4-Lug.................................... PL75MCFLThreaded............................... PL375MC- * Length depends on Cable Group 1.70 1.70 OR 1.44 MAX 1.297 1.297 PL74C-202 Shown PL75MC-202 Shown For polarizations, call customer service. SEALING SLEEVE SHRINKABLE STRAIN RELIEF .593 DIA MAX .593 DIA MAX Cable Plug Cable Plug 1.135 Wrench Crimp Tool Crimp, Push-on .096 SHRINKABLE SEALING SLEEVE (LONG) SHRINKABLE STRAIN RELIEF (CLEAR, 175C) PL73C- 2-Lug............................ PL743-Lug............................ PL754-Lug............................ PL75FLThreaded....................... PL375- .500 DIA .438 HEX .500 BODY DIA .438 WRENCH FLATS .593 MAX DIA OVER KNURL 1.267 .030 1.67 PL74-9 Shown Cable Plug PL73C-202 Shown 1.110 .438 WRENCH FLATS Wrench Crimp, Push-on Cable Jack 1.314 .096 Wrench Crimp PL73- .500 DIA Order Large Body version for cables with jacket dia. greater than .323". 3-Lug........................... CJ702-Lug........................... CJ70TL4-Lug........................... CJ70FLThreaded...................... CJ370- .096 .438 WRENCH FLATS PL73-9 Shown .438HEX .500 BODY DIA .500 WRENCH FLATS .593 DIA MAX OVER KNURL CJ70-9 Shown Right Angle Cable Plug Cable Jack Tool Crimp Tool Crimp 2-Lug........................... PLR74C3-Lug........................... PLR75C4-Lug........................... PLR75CFLThreaded...................... PLR375C- 3-Lug........................... CJ70C2-Lug........................... CJ70CTL4-Lug........................... CJ70CFLThreaded...................... CJ370C- 1.76 MAX SHRINKABLE SEALING SLEEVE (LONG) 1.405 PLR74C-201 Shown 1.11 .030 SHRINKABLE STRAIN RELIEF (CLEAR, 175C) SHRINKABLE SEALING SLEEVE (LONG) For cable groups 201-223 only. Contact customer service for other cables. .546 DIA MAX 1.416 .030 SHRINKABLE STRAIN RELIEF (CLEAR, 175 C) 1.800 .593 DIA MAX Right Angle TRB Adapter CJ70C-202 Shown TRB Coupling Adapter 1.110 Barrel Connector TRB Male to Female 3-Lug......................... ADRMF70 2-Lug......................... ADRMF70TL Threaded.................... ADRMF370 4-Lug......................... ADRMF70FL .961 .711 ADRMF70 Shown Refer to Cable Group Tables, pages 74-91. 6 3-Lug........................... AD78 2-Lug........................... AD78TL 4-Lug........................... AD78FL Threaded...................... AD378 1.290 .445 DIA AD78 Shown Twinax/Triax Connectors / Miniature Bulkhead Jacks 70/370 Series, TRB/TRT Bulkhead Jack Bulkhead Jack Front Mount, Solder Pot Tool Crimp 3-Lug.................................... BJ770 2-Lug.................................... BJ77TL 4-Lug.................................... BJ77FL Threaded............................... BJ377 3-Lug.................................... BJ79C2-Lug.................................... BJ79CTL4-Lug.................................... BJ79CFLThreaded............................... BJ379C- .500 HEX NUT .500-28UNEF-2A .625 HEX NUT .4375-28UNEF-2A TYP .892 SHRINKABLE SEALING SLEEVE(LONG) .687 DIA BJ79C Shown For polarizations, contact customer service. Mounting Hole: D3.109 SOLDER POT ACCEPTS .036 DIA CONDUCTOR .380 .562 DIA DIA BJ377 Shown (Hermetically sealed version available, pg.16) Mounting Hole: D4.125 .600 DIA .062 .487 7 COLOR BAND 1.146 .030 1.80 MAX SHRINKABLE STRAIN RELIEF (CLEAR, 175C) 1.122 Feed-Thru Bulkhead Jack .562 HEX NUT .4375-28UNEF-2A TYP .500-28UNEF-2A 3-Lug................................ BJ78 2-Lug................................ BJ78TL 4-Lug................................ BJ78FL Threaded........................... BJ378 .730 DIA BJ378 Shown (Hermetically sealed version available, pg.16) Mounting Hole: D3.187 .775 1.290 Bulkhead Solder Pot 1.314 3-Lug..................... BJ792-Lug..................... BJ79TL4-Lug..................... BJ79FLThreaded................ BJ379- .800 .437 HEX ACCEPTS .036 DIA CONDUCTOR .687 .750 DIA DIA 1.065 .110 .840 1.365 .865 .090 3-Lug........................ BJ75 2-Lug........................ BJ75TL 4-Lug........................ BJ75FL Threaded................... BJ375 .414 MIN .800 DIA .625-24UNEF-2A BJ75 Shown Mounting Hole: D2.140 1.312 .437 WRENCH FLATS .687 DIA .500-28UNEF-2A .4375-28UNEF-2A .625 HEX NUT Rear Mount, Solder Pot .500-28UNEF-2A .096 .722 Insulated Bulkhead Jack .625 HEX NUT 3-Lug........................ BJ76 2-Lug........................ BJ76TL 4-Lug........................ BJ76FL Threaded................... BJ376 Wrench Crimp BJ379-7 Shown Mounting Hole: D3.160 .062 DIA Rear Mount, Solder Pot Bulkhead Cable Jack ACCEPTS .041 DIA CONDUCTOR .750 HEX NUT BJ76 Shown Mounting Holes: D3.240 w/o solder lug/D3.208 w/ solder lug Insulated Bulkhead Cable Jack Insulated Bulkhead Cable Jack Wrench Crimp Tool Crimp 3-Lug........................................... BJ74C2-Lug........................................... BJ74CTL4-Lug........................................... BJ74CFLThreaded...................................... BJ374C- 3-Lug.............................................. BJ742-Lug.............................................. BJ74TL4-Lug.............................................. BJ74FLThreaded......................................... BJ374- .414 MIN .096 BJ74-9 Shown Mounting Hole: D2.140 .866 .437 HEX .750 HEX NUT BJ74C-202 Shown .800 DIA Mounting Hole: D2.140 .414 MIN .500 WRENCH FLATS .625-24 UNEF-2A .030 1.416 1.800 Insulated Feed-Thru Jack Wrench Crimp 3-Lug............................... BJ73 2-Lug............................... BJ73TL 4-Lug............................... BJ73FL Threaded.......................... BJ373 BJ73 Shown Mounting Hole: D2.140 1.290 .414 MIN .090 Insulated Bulkhead Jack .414 MIN .515 .090 Front Mount .800 DIA .625-24UNEF-2A .750 HEX NUT Refer to Cable Group Tables, pages 74-91. "D" mounting holes see page 54. For polarizations, contact customer service. 3-Lug............................... BJ72 2-Lug............................... BJ72TL 4-Lug............................... BJ72FL Threaded.......................... BJ372 BJ72 Shown Mounting Hole: D2.140 .750 HEX NUT .625-24UNEF-2A ACCEPTS .036 DIA CONDUCTOR .414 MIN 1.365 TWINAX/TRIAX CONNECTORS .625-24UNEF-2A SHRINKABLE SEALING SLEEVE (LONG) SHRINKABLE STRAIN RELIEF (CLEAR, 175C) .750 HEX NUT 1.314 .775 TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Miniature Circuit Board Jacks 70/370 Series Twinax/Triax TRB Concentric Twinax/Triax TRB Non-Insulated Bulkhead Jack Circuit Board Jack Concentric Female 3-Lug Bulkhead Mount 3-Lug.............................................. CBJ70 2-Lug.............................................. CBJ70TL 4-Lug.............................................. CBJ70FL (TRT) Threaded................................ CBJ370 3-Lug.......................................... CBBJ79 2-Lug.......................................... CBBJ79TL 4-Lug.......................................... CBBJ79FL Threaded..................................... CBBJ379 1.388 .425 .156 TYP .557 1.000 .156 .013 .100 .100 .300 .500 DIA .425 .0625 DIA 2 PLACES .150 TYP .200 .013 .0625 DIA, 2 PLACES .100 .200 CBJ70 Shown .300 .380 DIA CBBJ79 Shown Mounting Hole: D3.109 .100 .400 TYP .0700 DIA 4 PLACES .0935 DIA 4 PLACES .128 .562 HEX NUT .109 MAXIMUM PANEL THICKNESS Twinax/Triax TRB Right Angle Concentric Twinax/Triax TRB Insulated Bulkhead Jack Circuit Board Jack Concentric Female 3-Lug, Bulkhead Mount 3-Lug.............................................. CBJR70, CBJR70A MODEL LTR A NO. CODE DIM CBJR70 .24 CBJR70A A .34 B DIM .050 .058 C DIM .090 .090 3-Lug.............................................. CBBJ74 1.388 D DIM .0625 .070 .750 HEX NUT .557 .090 .013 .425 .0625 DIA D DIA TYP .156 .200 .0625 DIA, 2 PLACES 1.216 .200 1.042 .258 A .050 .380 TYP .100 .380 DIA .100 .030 TYP .100 .258 .400 TYP .0935 DIA 4 PLACES .625-24UNEF-2A .13 TYP .258 TYP Mounting Hole: D2.109 B TYP C TYP .100 Right Angle Circuit Board Bulkhead Jack Right Angle Insulated Circuit Board Bulkhead Jack Standard Version Insulated Version 3-Lug.............................................. CBBJR79 2-Lug.............................................. CBBJR79TL 4-Lug.............................................. CBBJR79FL Threaded......................................... CBBJR379 3-Lug.............................................. CBBJR74 2-Lug.............................................. CBBJR74TL 4-Lug.............................................. CBBJR74FL Threaded......................................... CBBJR374 MODEL LTR A B C D E NO. CODE DIM DIM DIM DIM DIM CBBJR79 .24 .565 .050 .090 .0625 CBBJR79A A .34 .665 .058 .090 .070 MODEL LTR A B NO. CODE DIM DIM CBBJR74 .345 .778 CBBJR74A A .445 .878 MAX PANEL THICKNESS .140 1.216 D DIM .0625 .070 1.324 1.042 .718 C DIM .050 .058 1.153 .050 .785 .090 A A B .380 DIA .380 DIA .030 TYP B .030 TYP .500-28UNEF-2A .562 HEX NUT CBBJR79 Shown Mounting Hole: D3.125 .13 TYP .258 TYP .124 C TYP .625-24UNEF-2A .750 HEX NUT .124 C TYP D TYP .090 TYP .100 * FOR MODEL .100 E DIA TYP # 305-0789 DIA = .0410 D DIA TYP .258 TYP .0625 DIA .0625 DIA .258 .050 .050 .100 Add "A" for tall versions example: CBBJR74A "D" mounting holes see page 54. .258 TYP .258 .100 8 CBBJR74 Shown Mounting Hole: D2.140 .13 TYP .258 TYP Twinax/Triax Connectors / TRB Series Pad Paralleling/T Adapter 9 Fixed Paralleling Jacks TRB Series Pad TRB 3-Lug Plug and Jack Fixed Paralleling Jack 2.683 Two Plugs, One Jack .593 DIA MAX .593 DIA MAX PL75 R Part Number CJ70 3-Lug.............................................. TN2 2-Lug.............................................. TN2TL 4-Lug.............................................. TN2FL Threaded......................................... TN2T Circuitry Schematic 2.673 R1 TNG2-R R R2 .625 1.166 R1 R TNG3-R R2 TN2 Shown R-Resistance (1/2W 1%) Substitute resistive value for each "RN" unless all values are identical. Fixed Paralleling Jack R R1 Two Jacks, One Plug 3-Lug.............................................. TN2A 2-Lug.............................................. TN2TLA 4-Lug.............................................. TN2FLA Threaded......................................... TN2TA R2 TRB "T" Adapter 1 3-Lug.............................................. BN73 R1RR 2 2-Lug.............................................. BN73TL R2 R3 4-Lug.............................................. BN73FL TRT "T" Adapter 2.673 INTERMEDIATE R1 R2 R3R1 R2 1.166 R4 Threaded......................................... BN373 .625 R5R3 R6 .593 R1DIA R2 OVER KNURL R3 R4 R5 1.075 R6 TN2A Shown BN73 Shown .440 .425 TYP * Other options available including Random Paralleling. Contact customer service for more information. .436 1.286 Triax Parallel Network 305-0138 TWINAX/TRIAX CONNECTORS For Adapters, see pages 58-61. For Terminations, see page 57. TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / RFI Caps & Terminations Twinax/Triax Terminators and RFI (Dust Caps) Trompeter provides Terminations and RFI caps versions of many of our twinax/triax connectors. Resistors are normally 1/8 watt for subminiature connectors and 1/2 watt for miniature and standard size connectors, with 1% tolerances for all. Parts to be capped Description Terminator RFI (Dust Cap) BJ30/CJ30 Series TWBNC Jack TNGT1-(3)-R RFI25-(3) BJ70/CJ70 Series TRB, Jack TNG1-(3)-R RFI75-(3) BJ70FL/CJ70FL TRB, Jack TNGFL1-(3)-R RFI75FL-(3) BJ70TL/CJ70TL TRB, Jack TNGTL1-(3)-R RFI75TL-(3) BJ80/CJ80 TRC, Jack TNGL1-(3)-R RFI85-(3) BJ150/CJ150 TRS, Jack TNGM1-(3)-R RFI155-(3) BJ150FL/CJ150FL TRS, Jack TNGMFL1-(3)-R RFI155FL-(3) BJ375/CJ370 TRT, Jack TNT1-(3)-R RFI375-(3) BJ375/CJ370 TRT, Jack TNTS1-(3)-R (Safety Holes) RFI375-(3) BJ380/CJ380 TRN, Jack TNTL1-(3)-R RFI385-(3) BJ803/CJ803 TRC, 3-lug Jack TNG3L1-(3) RFI853-(3) BJ3150/CJ3150 TTM, Jack TNTM1-(3)-R RFI3155-(3) J72 Twinax Patch Jack TPT-(3)-R RFI70-(3) J72L Twinax Patch Jack TPTL-(3)-R RFI70-(3) J152 Twinax Submin. Patch Jack TPTWM-(3)-R RFI150-(3) PL30 TWBNC, Plug TNGBJT1-(3)-R RFI21-(3) PL74 TRB, Plug TNGBJTL1-(3)-R RFI77TL-(3) PL75 TRB, Plug TNGBJ1-(3)-R RFI77-(3) PL75FL TRB, Plug TNGBJFL1-(3)-R RFI77FL-(3) PL80 TRC, Plug TNGLF1-(3)-R RFI80-(3) PL803 TRC, Plug TNGLF3L1-(3)-R RFI80(3) PL380 TRN TNTLF1-(3)-R RFI80(3) PL150 Submin. Patch Plug TJTWM-(3)-R - PL155 TRS, Plug RFI157-(3) PL155 TRS, Plug TNGBJM1-(3)-R (Bulkhead Mount) TNGMF1-(3)-R PL155FL TRS, Plug RFI157FL-(3) PL155FL TRS, Plug TNGBJMFL1-(3) (Bulkhead Mount) TNGMFFL1-(3)-R PL3155 TTM, Plug RFI3157-(3) PL3155 TTM, Plug TNTBJM1-(3)-R (Bulkhead Mount) TNTMF1-(3)-R PL350 TCM, Plug PL375 TRT, Plug TNTBJ1-(3)-R (Bulkhead Mount) RFI377-(3) PL375 TRT, Plug TNTF1-(3)-R RFI377-(3) PL380 TRN, Plug TNTLF1-(3)-R RFI380-(3) PL803 TRC, 3-lug, Plug TNGLF3L1-(3)-R RFI803-(3) For 450/3450 Series: Concentric Twinax See pages 22-23 See pages 22-23 Notes: (3) = Chain options, see page 63. "R" = Resistance For Chain Options and Ordering Instructions, see page 57. 10 RFI157-(3) RFI157FL-(3) RFI3157-(3) RFI357-(3) Twinax/Triax Connectors / Miniature Patching & Cable Assemblies Patch Jack Patch Cord TRB 3-Lug Patch Plug to Patch Plug J72 Twinax............................................ PTW-L-Z Triax................................................ PTR-L-Z .156 DIA MTG HOLE 11 "L" LENGTH 1.268 .570 .375 .812 .281 Cable Assembly .445 DIA .380 DIA TRB 3-Lug Plug to Patch Plug Twinax......................................... PTWX-L-Z Triax............................................ PTRX-L-Z .562 "L" LENGTH Patch Jack Cable Assembly Shielded TRB 3-Lug Plugs Without Hood............................... J72D With Hood..................................... J72S- Twinax......................................... PTWY-L-Z Triax............................................ PTRY-L-Z .156 DIA MTG HOLE .4375-28UNEF-2A Bend relief available, call customer service. "L" LENGTH .375 .812 .447 DIA .281 .562 1.735 .437 WRENCH FLATS .500 HEX .570 Parallel Patch Cord Twinax......................................... PTWS-L-Z Triax............................................ PTRS-L-Z .610 .570 .445 DIA .187 2.594 .156 DIA MTG HOLE .4375-28UNEF-2A "L" Length in inches Patch Plug PL71- .375 .812 .445 DIA 1.337 .281 .575 .610 PL71-7 Shown .505 DIA 1.735 .437 WRENCH FLATS .543 DIA MAX Termination .562 .437 WRENCH FLATS 1.880 TPT-1-R RFI Cap RFI 70-1 .437 WRENCH FLATS For patch jack, no chain For other chain options see page 58. Refer to Cable Group Tables, pages 74-91. Panels are on pages 51-54. R = Resistance, 50, 75, 78 and 124 ohm standard L = Length in Inches, 6, 12, 24, 36, 48, 60 standard Z = Impedance in Ohms, 50, 75, 78 and 124 ohm standard TWINAX/TRIAX CONNECTORS .570 .374 DIA TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Miniature Patching Twinax Patch Plug Twinax Patch Cord PL71L- Twinax......................................... PTWYL-L-Z Triax............................................ PTRYL-L-Z 2.514 1.689 "L" LENGTH .500 DIA .374 .437 WRENCH FLATS .437 FLATS .513 DIA MAX Twinax Patch Jack Looping Plug TRB 3-Lug Twinax.......................................... LPTWL-Z Triax.............................................. LPTRL--Z J72L 3.969 2.660 .156 DIA MTG HOLE .374 DIA TYP .570 TROMPETER ELECTRONICS .375 .812 .445 DIA .380 DIA 2.250 1.20 .625 LPTWL-78 Shown .281 .560 Front-loading Modular Panels For use with J74MST-R Patch Jacks (pg. 13) 1.404 1.000 TYP .688 TYP STD. 2 DSI (.580 WIDE) .450 DIA THRU JSISM-60 Panel Dimensions Modules/Panels Jacks/Module Jacks/Panel Part Number 19"x3.483" 1.046 10 2 20 155-0830-1 (JSISM-60) 19"x2.34" 3.483 .750 40 JSISM-120 .625 M 10 S 4 2.650 L .420 1.404 1.000 TYP 1.404 JSISM-60.330 MAX .688 TYP .660 STD. 2 DSI (.580 WIDE) .450 DIA THRU 3.483 .625 .625 .750 .625 1.046 .750 2.077 M 1.000 M S 2.218 2.608 L 4.826 M L S .420 L .330 MAX .660 2.077 .330 MAX TYP R-Resistance (1/2W, 1%), Z-Denotes Cable Impedance. 12 .204 5.234 2.650 S JSISM-120 Standard and Sub-miniature Panels, see pages 53-54. .450 DIA THRU 120 HOLES .660 2.077 Twinax/Triax Connectors / Miniature Normal-Thru Patch Jacks J74 Series 13 Monitor-Terminated Patch Jack Use with Front Loading Modular Panels, see page 12. J74MST-R .156 DIA MTG HOLE .445 DIA TYP BNC RECEPTACLES .750 1.897 2.125 2.409 .625 TRB .487 .570 .562 2.660 J74MST-R SCHEMATIC Monitor-Terminated Plugging into the source side provides a resistive load to the monitored side. Separate 20 dB isolator jack and TRB input jacks for monitoring of the normal-thru signal. Trompeter's superior J74 Series of twinax/triax patch jacks provide a normal-thru signal path without the use of looping plugs or patch cords. Same body size as our J24 Series coax dual patch jacks. It offers a self-wiping, self-normalizing switch with gold plated beryllium copper contacts, which provides positive electrical contact with 30,000 minimum mating cycles. All metallic parts are machined, formed, or die-casted to extremely close tolerances which provide better intermateability improving EMI/RFI suppression and reduced signal loss. The TRB/ TRT patch jack bodies are made of top-quality brass with a bright nickel-plated, non-tarnish finish, which resists tarnishing and the associated reduction of conductivity. Dielectrics are made of machined PTFE for superior dielectric properties and heat resistance. When you want performance and long-life, these patch jacks are what you need. Normal-Thru Patch Jack Self-terminating J74T-R Provides a resistive load to the unused side of the jack. Insertion of a patch plug into the source side automatically terminates the load side. Plugging into the load side automatically terminates the source side. Dual Patch Jack Normally-terminated J74-2T-R Provides a resistive load. .445 DIA TYP TRB .156 DIA TYP MTG HOLE BNC RECEPTACLES 1.659 1.375 1.148 .625 2.660 J74T-R Self-Terminating Provides a resistive load to the unused side of the jack. Insertion of a patch plug into the source side automatically terminates the load side. Plugging into the load side automatically terminates the source side. J74-2T-R Normally-Terminated Provides a resistive load. R-Resistance (1/2W, 1%). For standard panels see page 51. TWINAX/TRIAX CONNECTORS .487 .570 .562 TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Subminiature Patching Subminiature Patch Plug Subminiature Normal Through Twinax/Triax Patch Jack PL150- Smallest twinax/triax patch jack 1.300 J158 .264 .377 .375 WRENCH FLATS .375 HEX .468 DIA MAX 1.090 1.340 Subminiature Patch Jack .970 .500 .347 TYP Cable Entry Mount on JSIX panels (For panels see pages 51-54) 0.129 TYP J150- TRS RECEPTACLE 1.769 .468 1.250 .264 SCHEMATIC .347 DIA Patch Cord Subminiature patch plug to subminiature patch plug .375 WRENCH FLATS Triax 50, 75................................................................ PTRM-L-Z Twinax 75, 124......................................................... PTWM-L-Z Subminiature Patch Jack "L" LENGTH TRS 3-lug J152 1.209 .128 MTG HOLE .295 Cable Assembly .264 .308 J152 Shown .638 .347 DIA .218 Subminiature patch plug to TRS 3-lug plug, 4-lug/threaded versions available Triax 50, 75.............................................................. PTRMX-L-Z Twinax 75, 124....................................................... PTWMX-L-Z "L" LENGTH .436 RFI Cap Cable Assembly For subminiature patch jack, no chain. TRS* 3-lug plug to TRS* 3-lug plug, 4-lug/threaded versions available RFI 150-1 Triax 50, 75.............................................................. PTRMY-L-Z Twinax 75, 124....................................................... PTWMY-L-Z 1.275 "L" LENGTH For other chain options see page XX. .3/8 WRENCH FLATS 3/8 HEX .443 DIA MAX -2 SHOWN Cable Assembly Metal junction, random paralleling TRS* 3-lug plugs, 4-lug/threaded versions available Termination For TRS* 3-lug jack, no chain. Twinax 78, 124, Triax 50, 75............................ TNM3-Z TNGM1-1-R 1.131 .460 DIA MAX .375 WRENCH FLATS For other chain options see page 63. *4-lug/threaded versions available 4.50" Refer to Cable Group Tables, pages 74-91. 14 For JSIX subminiature insulated panels see page 53. Other Terminations and RFI Caps, see page 57. Twinax/Triax Connectors / Standard & Subminiature Looping Plugs Standard Looping Plug Standard Looping Plug LPTW & LPTR Series LPLTW & LPLTR Series Dash # Model No -1 -2 -3 -4 LPTW-78 LPTW-124 LPTR-50 LPTR-75 Color Cable Type Blue Twinax Yellow Triax Model No -1 -3 -4 -5 LPLTW-78 LPLTW-124 LPLTR-50 LPLTR-75 .625 Color Cable Type Blue Twinax Yellow Triax DIA TYP .374 -+.005 2.825 2.250 +- .010 2.825 1.570 TROMPETER ELECTRONICS 1.200 + - .010 Dash # 78 124 50 75 Impd 78 124 50 75 2.250 TROMPETER ELECTRONICS DIA TYP .374 +.005 - Impd 15 1.000 .590 .540 .560 Standard Looping Plug with TRB Test Standard Looping Plug LPTWA, LPLTWA, LPTRA, & LPLTRA Series LPTWAL, LPLTWAL, LPTRAL, & LPLTRAL Series Dash # Model No -1 -2 -3 -4 -5 -6 -7 -8 LPTWA-78 LPLTWA-78 LPTWA-124 LPLTWA-124 LPTRA-50 LPLTRA-50 LPTRA-75 LPLTRA-75 Color Type Blue Impd Twinax 78 124 50 Yellow Triax 75 DIM A DIM B Dash # Model No .625 1.000 .625 1.000 .625 1.000 .625 1.000 1.20 1.57 1.20 1.57 1.20 1.57 1.20 1.57 -1 -2 -3 -4 -5 -6 -7 -8 LPTWAL-78 LPLTWAL-78 LPTWAL-124 LPLTWAL-124 LPTRAL-50 LPLTRAL-50 LPTRAL-75 LPLTRAL-75 Color Type Blue Impd 78 Twinax 124 50 Yellow Triax 75 DIM A DIM B .625 1.000 .625 1.000 .625 1.000 .625 1.000 1.20 1.57 1.20 1.57 1.20 1.57 1.20 1.57 3.312 + - .030 .575 + .030 - .590 .540 1.689 +.030 - BJ770 RECEPTACLE A +.030 - 2.250 .374 DIA TYP A B TRB RECEPTACLE TROMPETER ELECTRONICS TROMPETER ELECTRONICS .374 +.005 DIA THRU B 4.456 +.030 - 2.250 .56 Standard Looping Plug with Two Tip Test Points LPTW2TPL Series Standard Looping Plug LPTWL & LPTRL Series Dash # Model No Impd Color -1 LPTW2TPL-78 78 Blue -2 LPTW2TPL-124 124 Blue Dash # Model No -1 -2 -3 -4 LPTWL-78 LPTWL-124 LPTRL-50 LPTRL-75 Color Type Blue Twinax Yellow Impd Triax 78 124 50 75 3.969 +.030 3.969 .590 .540 .625 .56 Standard Looping Plug with Two Tip Test Points Standard Looping Plug LPTW2TP Series LPLTW2TP Series Dash # Model No Impd Color -1 -2 LPTW2TP-78 LPTW2TP-124 78 124 Blue Blue Dash # Model No Impd Color -1 -2 LPLTW2TP-78 LPLTW2TP-124 78 124 Blue Blue .560 .590 .540 2.250 + - .010 1.000 .625 1.570 TROMPETER ELECTRONICS 1.200 + - .010 TROMPETER ELECTRONICS 2.994 + - .010 2.250 2.994 .169 TWINAX/TRIAX CONNECTORS .625 .374 DIA TYP 1.20 TROMPETER ELECTRONICS TROMPETER ELECTRONICS 1.200 .010 2.250 2.250 .010 TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Hermetically Sealed Connectors Concentric Twinax/Triax Hermetic seals prevent leakage through the bulkhead from inside of the connector. Trompeter's miniature size hermetically sealed connectors include the feed-through BJ78HS, the front mounted BJ77HS, the rear mounted BJ79HS and BJ379HS. In the subminiature size we offer the front mounted BJ157HS and BJ157FLHS (four lug version). The BJ3150HS and BJ3150SHS offer a threaded rear mount version with a safety wire option. These connectors have leakage rates of 1x10-8 atm cc/second. The 150 Series have leakage rates of 1x10-6 atm cc/second. These connectors meet MIL-C-49142 specifications. Standard nonhermetic connector types such as the BJ78 could leak between the contacts and dielectrics. Hermetically sealed connectors are designed for bulkhead mounting in vacuum chambers or where toxic and other gases are present. Hermetic connectors are highly beneficial in reactors, gas/petro plants, oil drilling sites, liquid test and measurement, commercial, military, industrial and space applications. They are reliable under the most severe atmospheric conditions. Hermetically Sealed Bulkhead Jack .500 HEX NUT .4375-28UNEF-2A Front Mount Features BJ77HS * Standard TRB/MIL-C-49142 * Glass to Metal Seals * Sustains Extreme Temperature Ranges * Stainless Steel or Nickel Plated Brass Body * Gold Plated Contacts .892 .380 .562 DIA DIA .15 Mounting Hole: D4.125 .062 .487 .428 .765 Benefits * Mechanical and Environmentally Reliable Method * Wide Range of Application Usage * More Cost Effective than Stainless Steel * Reliable Connections Hermetically Sealed Bulkhead Jack 3-lug.......... BJ157HS 4-lug....... BJ157FLHS .093 DIA .375 HEX NUT .3125-32UNEF-2A SOLDER POT ACCEPTS .727 REF .034 MAX DIA CONDUCTOR .437 HEX .469 DIA GASKET .402 Hermetically Sealed Bulkhead Jack Mounting Hole: D6.187 1.050 Subminiature Twinax/Triax Rear Mount (A=.500)............................. BJ3150HS Solder Pot Bulkhead (A=.562)................ BJ3150SHS .4375-28UNEF-2A A HEX NUT Hermetically Sealed Miniature Twinax/Triax SOLDER POT ACCEPTS .034 DIA CONDUCTOR .140 DIA .892 WIRE HOLE ACCEPTS .027 DIAMETER CONDUCTOR .730 DIA .562 HEX NUT .500-28UNEF-2A Feed-thru Bulkhead Mount BJ78HS, BJ378HS Mounting Hole: D4.200 .600 DIA .100 (Threaded Version Not Shown) Mounting Hole: D3.187 BJ78HS Shown Insulated Version BJ73HS .750 1.050 (Not Shown) .775 1.290 Mounting Hole: D2.187 Hermetically Sealed .56 HEX NUT Miniature Twinax/Triax Rear Mount Bulkhead Jack Hermetically Sealed Bulkhead Jack Miniature Twinax/Triax TRT/Threaded BJ376HS .437 WRENCH FLATS Rear Mount, Bulkhead Mount .500-28UNEF-2A .625 HEX NUT .500-28UNEF-2A .15 BJ79HS .437 WRENCH FLATS Mounting Hole: D3.160 .800 .15 1.09 .690 DIA Mounting Hole: D3.160 .840 1.09 .690 DIA "D" mounting holes see page 54. 16 Note: Only a select few of our hermetically sealed connectors are shown here. Contact customer service for more information. Twinax/Triax Connectors / 150 Series Intro Size 8 Mating Contacts 150 Series Miniature 2, 3, 4-lug, & Push-on (TRS) 3150 Series Miniature Threaded (TTM) 150/3150 Series are concentric twinax/triax connectors for high density and weight reduction applications. They are commonly used in digital data bus, video pair, MIL-STD-1553B (primary/ redundant), baseband circuit and in any application for "noise-free guarded" circuits. TRS/TTM push-on connectors are designed for blind mate rack and panel applications. The male plug mates with any TRS/TTM jack and are ideally suited for test cable applications. Mating Twinax Size 8 Contacts for Digital Data Bus Multi-pin Connectors 17 Features * Same size as TPS/TCM connectors * Solderable Wrench Crimp versions for cables with up to .215" outer diameter * Tool Crimp versions for quick termination of cables with up to .250" outer diameter * 3-lug, 4-lug, and threaded versions provide different levels of mechanical stability and keying * Does not require mechanical alignment for mating * Meets MIL-C-49142, 48-hour salt spray requirement * Special plating available to satisfy MIL-STD-1344 500-hour salt spray requirement * Push-on versions for test cable applications * Fewer pieces to assemble * Hermetically sealed versions available (see page 16) SPC8S-201 .315/.313 DIA .90 .276/.273 DIA .288 .284 DIA Socket....................................... SPC8S-201 Pin............................................. SPC8P-201 .631/.627 1.530 This pair of scoop-proof concentric contacts fits the Size 8 cavity of MIL-C-38999 series 1, 3, & 4 and MIL-STD-1760 "External Stores" type connectors. SPC8S-201 Shown Features * Fits MIL-C-17/176-00002 and other twinax/triax cables * Heat treated beryllium copper spring members * Gold plated, Full Crimp contacts .315/.313 DIA SPC8P-201 .90 .305/296 1.173 SPC8P-201 Shown TWINAX/TRIAX CONNECTORS .218 DIA TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Subminiature Jacks & Plugs 150/3150 Series TRS/TTM Sub-miniature Jacks & Plugs Sub-miniature concentric twinax/triax connectors increase packing density up to 246%. They are designed for high density applications where digital, video pair or baseband noise-free guarded circuits are required. The 3-lug, 4-lug, and threaded versions improve mechanical stability and provide "error-free" redundant data bus capabilities. The wrench crimp version accommodates cables with other jacket diameters up to .215" and the tool crimp versions up to .250". Cable Plug Wrench Crimp Bulkhead Jack 3-Lug.......................................... PL1554-Lug....................................... PL155FLThreaded.................................. PL3155- Rear Mount, Wrench Crimp 3-Lug.......................................... BJ1594-Lug....................................... BJ159FLThreaded.................................. BJ3159- .080 .748 .790 .590 .080 PL155-29 Shown .375 HEX NUT .562 HEX .4375-28UNEF-2A .500 HEX NUT .375 HEX NUT .375 WRENCH FLATS .460 DIA MAX BJ159-29 Shown Mounting Hole: D4.125 Bulkhead Jack Cable Plug Rear Mount, Tool Crimp Tool Crimp 3-Lug...................................... BJ159AC4-Lug................................... BJ159ACFLThreaded.............................. BJ3159AC- 3-Lug..................................... PL155AC4-Lug................................. PL155ACFLThreaded............................. PL3155AC- .590 STRAIN RELIEF 1.164 1.322 BJ159AC Shown STRAIN RELIEF Mounting Hole: D4.125 PL155AC-207 Shown .600 DIA .4375-28UNEF-2A .500 HEX 1.00 .484 DIA MAX OVER KNURL Cable Jack .790 Wrench Crimp Right Angle Cable Plug .080 3-Lug.................................. CJ1504-Lug............................... CJ150FLThreaded.......................... CJ3150- Tool Crimp 3-Lug................................... PLR155AC4-Lug............................... PLR155ACFLThreaded........................... PL33155AC- .375 HEX NUT .375 WRENCH FLATS CJ150-29 Shown .484 DIA MAX 1.77 MAX SHRINKABLE SEALING SLEEVE (LONG) .030 1.317 Cable Jack Tool Crimp 3-Lug...................................... CJ150AC4-Lug................................... CJ150ACFLThreaded.............................. CJ3150AC- .933 .484 DIA MAX OVER KNURL SHRINKABLE SEALING SLEEVE (LONG) CLEAR, 175C SHRINKABLE STRAIN RELIEF PLR3155AC-201 Shown CJ150AC-207 Shown .34 1.289 .030 Refer to Cable Group Tables, pages 74-91. 18 "D" mounting holes see page 54. SHRINKABLE STRAIN RELIEF Twinax/Triax Connectors / Subminiature Bulkhead Jacks 150/3150 Series, TRS/TTM Front Mount Bulkhead Jack Bulkhead Jack Rear Mount, Solder Pot Rear Mount, Solder Pot 3-Lug................................................. BJ157 4-Lug.............................................. BJ157FL Threaded......................................... BJ3157 3-Lug................................................. BJ150 4-Lug.............................................. BJ150FL Threaded......................................... BJ3150 19 1.049 .818 .101 1.050 .402 BJ150 Shown ACCEPTS .034 MAX DIA CONDUCTOR .750 .437 HEX .3125-32UNEF-2A .375 HEX NUT BJ157 Shown (Hermetically sealed version available, pg.16) Mounting Hole: D6.187 .093 DIA HOLE Mounting Hole: D4.250 .892 SOLDER POT ACCEPTS .034 DIA CONDUCTOR .500 HEX NUT .4375-28UNEF-2A .140 DIA THRU Feed-Through Jack Bulkhead Jacks 3-Lug................................................. BJ158 4-Lug.............................................. BJ158FL Threaded......................................... BJ3158 Flange Mount, Solder Pot 3-Lug......................................... BJ157F 4-Lug...................................... BJ157FFL Threaded................................. BJ3157F 1.070 .620 Hole Configuration 2/Clear - .103" Diameter 2/Threaded - .099-56UNF-UB 4/Clear - .103" Diameter 4/Threaded - .099-56UNF-UB A Dim= .425 B Dim= .687 BJ158 Shown Mounting Hole: D5.190/D4.190 (Threaded) # of Holes/Type-Dimension -2C(S) -2T(S) -4C(S) -4T(S) .500 HEX .375-32UNEF-2A .437 HEX NUT 1.050 .485 B TYP .090 Insulated Bulkhead Jack .500 TYP Rear Mount, Tool Crimp .300 DIA MAX TYP 3-Lug...................................... BJ154AC4-Lug.................................. BJ154ACFLThreaded.............................. BJ3154AC.580 MTG HOLES SEE BELOW .688 HEX NUT SHRINKABLE SEALING SLEEVE (LONG) SOLDER POT ACCEPTS .026 DIA CONDUCTOR A .750 DIA BJ157F Shown (S) = Comes with Stainless Steel Phillips #3-56 Pan Head Screws Maximum Panel Thickness .187 BJ154AC Shown Mounting Hole: D9.116 1.289 .030 SHRINKABLE STRAIN RELIEF Insulated Feed-Through Jack Front Mount, Solder Pot 3-Lug................................................. BJ153 4-Lug.............................................. BJ153FL Threaded......................................... BJ3153 3-Lug................................................. BJ152 4-Lug.............................................. BJ152FL Threaded......................................... BJ3152 BJ152 Shown Mounting Hole: D9.208 1.070 .580 .155 .5625-28UN-2A .687 HEX NUT BJ153 Shown Mounting Hole: D9.116 SOLDER POT ACCEPTS .034 MAX DIA CONDUCTOR .295 DIA .760 .5625-28UNEF-2A .688 HEX .308 1.055 Refer to Cable Group Tables, pages 74-91. "D" mounting holes see page 54. TWINAX/TRIAX CONNECTORS Insulated Bulkhead Jack TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Subminiature 150/3150 Series Circuit Board Jack Push-on Cable Plug 3-Lug............................................... CBJ157 4-Lug........................................... CBJ157FL Threaded....................................... CBJ3157 Wrench Crimp PL153.080 .686 .400 TYP .308 .049/.045 DIA 6 HOLES .722 .013 .200 TYP .100" CBJ157 Shown Max Board Thickness .125 .437 DIA .375 WRENCH FLATS PL153-29 Shown .375 HEX NUT .170 Right Angle Circuit Board Jack Twinax/Triax TRS Subminiature 3-Lug............................................. CBJR157 4-Lug......................................... CBJR157FL Threaded..................................... CBJR3157 CBBJR159 Right Angle Bulkhead Rear Mount 3-Lug .590 .562 HEX .665 .030 O.062.001 TYP .778 .062 DIA TYP .413 .100 .070 DIA 4 PLACES .125 .660 .030 .300 .100 .200 .4375-28UNEF-2A .500 HEX NUT .125 .120 Max Panel Thickness: .125 D-Hole: D4 3-Lug............................................... BN153 4-Lug............................................ BN153FL Threaded........................................ BN3153 1.156 1.034 BN153 Shown .375 WRENCH FLATS TRS/TTM Coupling Adapter Barrel Connector 3-Lug............................................... AD158 4-Lug............................................ AD158FL Threaded....................................... AD3158 1.070 AD158 Shown .400 DIA MAX OVER KNURL Refer to Cable Group Tables, pages 74-91. 20 "D" mounting holes see page 54. .100.003 O.070 .001 4 PLACES CBJR157 Shown "T" Adapter .300 .003 .200 .003 .100 .003 O.443 .439 .190 .187 Twinax/Triax Connectors / Series Instructions 21 450 Series Subminiature Twinax 3-lug & 4-lug 3450 Series Subminiature Twinax Threaded Concentric connectors designed for MIL-STD-1553B airborne digital databus weight reduction applications. Features * 3-lug, 4-lug & threaded versions * Field installation full crimp design. No soldering required * Fully inspectable assembly process (no blind or questionable solder connections) * Total of ten polarized & keyed combinations * Three different keyings for 3-lug versions * Two interchangeable pin & socket arrangements * Fewer pieces to assemble * Meets MIL-C-49142, 48-hour salt spray requirement * Standard plating to satisfy MIL-STD-1344, 500-hour salt-spray requirement * Weatherproof designs utilize sealing gaskets and heat shrink tubing * Fits MIL-C-17/176-00002 & other twinax/triax cables * Compatible with Raychem designs utilizing military crimp style connectors 80 Series Standard 2-lug & 3-lug (TRC) 380 Series Standard Threaded (TRN) Used in digital data bus, video pair, MIL-STD-1553B (primary/redundant data bus), MIL-STD-1397 (shipboard data bus), baseband circuit and any application for noise-free guarded circuits. Features * Standard "C" sized concentric connectors * Used with larger twinax/triax cables with outer diameters of .250"-615" * Does not require mechanical alignment for mating Miniature 2-Pin Polarized, 2-lug (TWBNC) Used in digital data bus, video pair, MIL-STD 1553B (airborne/ ground primary/redundant), baseband circuit and any application for "noise-free guarded" circuits. They are not recommended for new designs. MIL-STD-1553B permits designer discretion for use of concentric designs in lieu of the two-pin connector. Features * Same size as BNC/TNC connectors * Fully enclosed beryllium copper spring fingers * Stepped Dielectric TWINAX/TRIAX CONNECTORS 30 Series TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Concentric Twinax 450 Series Concentric Twinax 450 Series 3-lug & 4-lug Keyings .080"110 125 P R 125 W .067" .062" TYP The 450 Series was designed for airborne digital data bus applications utilizing the MIL-STD-1553B data bus. The 450 Series will fit most twinax cables. Connectors are available in five FL .067" .062" TYP 110 125 .067" .062" TYP 90 TYP .080" 125 125 125 .067" .062" TYP different coupling configurations which include 3-lug versions with three (3) separate keyings, a 4-lug, and a threaded version with safety wire holes. Diagrams shown above are for plugs. Refer to page 23 for photo of intermediate contacts. Bulkhead Jack Rear mount, Solder pot .438 HEX NUT .3125-32UNEF-2A .750 MAX SOLDER POT ACCEPTS .026 DIA CONDUCTOR .240 DIA .075 .795 .047 DIA SAFETY WIRE HOLES 2 PLACES .438 HEX NUT SOLDER POT ACCEPTS .750 .026 MAX MAX DIA COND. .437 HEX NUT .240 DIA Mounting Holes: DD8.250 DD8.125 (Threaded) .075 .456 .3125-32UNEF-2A .795 1.03 Intermediate Contact Pin Socket BJ450PP BJ450RP BJ450WP BJ450FLP BJ3450P BJ450PS BJ450RS BJ450WS BJ450FLS BJ3450S Intermediate Contact Pin Socket P R W FL - BJ457PP BJ457RP BJ457WP BJ457FLP BJ3457P BJ457PS BJ457RS BJ457WS BJ457FLS BJ3457S Key Code Intermediate Contact Pin Socket PLR455ACPPPLR455ACRPPLR455ACWPPLR455ACFLPPLR3455ACP- PLR455ACPSPLR455ACRSPLR455ACWSPLR455ACFLSPLR3455ACS- P R W FL - Coupling Type 3-lug 3-lug 3-lug 4-lug Threaded Key Code BJ457FLP-1 SHOWN Right Angle Cable Plug Coupling Type .030 All Crimp SEALING SLEEVE 1.46 Mounting Holes: DD8.130 DD8.125 (Threaded) 3-lug 3-lug 3-lug 4-lug Threaded Key Code 1.03 Bulkhead Jack Front mount, Solder pot Coupling Type .438 HEX NUT Mounting Holes: .047 DIA SAFETY WIRE HOLES DD8.130 2 PLACES DD8.125 (Threaded) 1.10 MAX (1.25) .500 DIA OVER KNURL 3-lug 3-lug 3-lug 4-lug Threaded P R W FL - PLR455ACPP-201 RFI Jack Caps & Bulkhead Jack Terminations For use with 450 Series Plugs Rear Mount Refer to Cable Group Tables, pages 74-91. 22 .080" 110 Chain options see page 57. "D" mounting holes see page 54. Coupling Type 3-lug 3-lug 3-lug 4-lug Threaded RFI Caps RFI457RFI457RFI457RFI457FLRFI3457- Intermediate Contact Pin Socket TBJ451P- -R TBJ451P- -R TBJ451P- -R TBJ451FLP- -R TBJ3451P- -R TBJ451S- -R TBJ451S- -R TBJ451S- -R TBJ451FLS- -R TBJ3451S- -R Twinax/Triax Connectors / Concentric Twinax 450 Series 23 450 Series Intermediate Contact Assemblies Pin/Socket . . . . . PS450AC- Socket/Pin . . . . . SP450ACContact customer service for exact specifications. For Trompeter connectors which meet outgassing requirements, contact our technical support staff for more information. Compatible with Raychem DK-621 Series. Refer to page 22 for Keyings. The 450 Series includes cable jacks and plugs with interchangeable contact assemblies. The contact and body assemblies may be ordered separately (see the facing page). Cable connectors accept cables with a maximum outer diameter of .180" and conductors to .025". Bulkhead Cable Jack Rear mount, All Crimp .047 SAFETY WIRE HOLES-2 PLACES .4375 HEX NUT .43 HEX .3125-32UNEF-2A .2400 DIA .334 .707 SEALING SLEEVE (LONG) 1.365 Coupling Key Body Type Code Assembly Only Assembly Intermediate Contact Pin Socket 3-lug 3-lug 3-lug 4-lug Threaded BJ459ACPPBJ459ACRPBJ459ACWPBJ459ACFLPBJ3459ACP- BJ459ACPSBJ459ACRSBJ459ACWSBJ459ACFLSBJ3459ACS- Coupling Key Body Type Code Assembly Only Assembly Intermediate Contact Pin Socket 3-lug 3-lug 3-lug 4-lug Threaded CJ450ACPPCJ450ACRPCJ450ACWPCJ450ACFLPCJ3450ACP- CJ450ACPSCJ450ACRSCJ450ACWSCJ450ACFLSCJ3450ACS- Coupling Key Body Type Code Assembly Only Assembly Intermediate Contact Pin Socket 3-lug 3-lug 3-lug 4-lug Threaded PL455ACPPPL455ACRPPL455ACWPPL455ACFLPPL3455ACP- PL455ACPSPL455ACRSPL455ACWSPL455ACFLSPL3455ACS- P R W FL - BJ459ACPBJ459ACRBJ459ACWBJ459ACFLBJ3459AC- .030 (1.25) BJ459ACFL-202 Mounting Holes: DD8.156, DD8.125 (Threaded) Cable Jack All Crimp .030 SEALING SLEEVE 1.365 .334 DIA .2400 DIA (1.25) CJ450ACFLP-202 Cable Plug All Crimp .500 DIA OVER KNURL 1.25 1.43 PL455ACR-221 .030 SEALING SLEEVE RFI Plug Caps & Terminations Plugs for use with 450 Series Jacks Chain options see page 57. "D" mounting holes see page 54. P R W FL - CJ450ACPCJ450ACRCJ450ACWCJ450ACFLCJ3450AC- PL455ACPPL455ACRPL455ACWPL455ACFLPL3455AC- Intermediate Coupling RFI Contact Pin to Type Caps mate with Sockets Sockets to mate with Pins 3-lug 3-lug 3-lug 4-lug Threaded TNG451S- -R TNG451S- -R TNG451S- -R TNG451FLS- -R TNG3451S- -R RFI455RFI455RFI455RFI455FLRFI3455- TNG451P- -R TNG451P- -R TNG451P- -R TNG451FLP- -R TNG3451P- -R TWINAX/TRIAX CONNECTORS .334 P R W FL - TWINAX/TRIAX CONNECTORS Twinax/Triax Connectors / Standard Threaded 80/380 Series, TRC/TRN Cable Plug Bulkhead Cable Jacks 2-lug............................................. PL803-lug........................................... PL803Threaded.....................................PL380- Wrench Crimp, Flange Mount 2-lug........................................... BJ89F3-lug......................................... BJ893FThreaded.................................. BJ389F- .687 WRENCH FLAT 1.773 Wrench Crimp, D Hole Mount PL80 Shown Larger bodies available to accommodate cable sizes, contact customer service. .750 DIA 2-lug............................................ BJ893-lug.......................................... BJ893Threaded................................... BJ389.844 TYP .625 WRENCH FLAT .130 .625 WRENCH FLATS .781 DIA MAX .685 .535 DIA DIA 1.125 TYP .750 Cable Jack Wrench Crimp MAX PANEL THK .250 2-lug............................................. CJ803-lug........................................... CJ803Threaded.................................... CJ380- .120 DIA 4 MTG HOLES .130 CABLE ENTRY 1.590 Top Drawing: BJ89F Shown 1.790 1.000 HEX TYP 1.790 1.590 .500 .094 .761 .625 WRENCH FLATS Bottom Drawing: BJ89 Shown .130 Mounting Holes: DD6.250 / D11.250 - Cable Groups: -14A, -16, -61, -62 CJ80 Shown .535 DIA .500 WRENCH FLATS .130 .919 1.590 WRENCH FLATS Bulkhead Jack Solder Pot 2-lug................ BJ80 3-lug.............. BJ803 Threaded........ BJ380 TRC "T" Adapter 1.312 .500 .095 2-lug............ BN83-1 3-lug.......... BN833-1 Threaded... BN383-1 .065 DIA .535 DIA BJ80 Shown Mounting Hole: D1.156 1.750 .750 SQ. .375 .535 DIA TYP ACCEPTS .065 DIA CONDUCTOR JACK JACK 1.619 .773 DIA MAX .750-32UNEF-2A BN83-1 Shown 1.000 HEX .730 DIA .140 DIA MTG HOLE Feed-thru Jack 2-lug................ BJ88 3-lug.............. BJ883 Threaded....... BJ388 BJ88 Shown Mounting Hole: D1.343 Refer to Cable Group Tables, pages 74-91. 24 "D" mounting holes see page 54. .200 DIA 1.650 TYP .90 1.060 DIA 1.000 HEX NUT .750-32UNEF-2A PLUG .406 For other chain options see page 63. Twinax/Triax Connectors / Two-Pin Polarized 30 Series, TWBNC/TWTNC Mil-C-3655 Interface 25 Circuit Board Bulkhead Jack Right Angle-Two-pin Polarized Twinax (TWBNC) CBBJR39A Cable Plug 1.216 Wrench Crimp, Two-pin Polarized 1.046 .946 2-lug............................................ PL30- .718 .050 .096 .931 .34 .380 DIA PL30 Shown .665 .030 TYP .437 HEX NUT .437 WRENCH FLATS .593 DIA MAX .500-28UNEF-2A .562 HEX NUT .13 TYP .124 Mounting Hole: D3.125 .258 TYP .058 TYP .090 TYP .100 Bulkhead Jack Front Mount, Solder Pot, Two-pin Polarized 2-lug................................................... BJ30 .0625 DIA 1.070 .258 .050 .046 .468 .258 TYP .070 DIA TYP .040 DIA CONDUCTORS BJ30 Shown Mounting Hole: D5.130 .100 Bulkhead Jack .375-32UNEF-2A .437 HEX NUT .468 HEX NUT Rear Mount, Solder Pot Two-pin Polarized 2-lug.................................................... BJ31 Feed-Through Jack Two-pin Polarized .837 2-lug.................................................... BJ38 .310 .093 .562 HEX NUT .131 1.308 .783 BJ38 Shown Mounting Hole: D3.160 .794 SOLDER POT ACCEPTS .040 DIA CONDUCTORS .380 DIA BJ31 SHOWN .500-28UNEF-2A BJ31 Shown Mounting Hole: D3.280 .730 DIA .500-28UNEF-2A .525 .625 HEX .687HEX Bulkhead Cable Jack Rear Mount, Wrench Crimp Two-pin Polarized 2-lug............................................. BJ391.000 .096 BJ39 Shown Mounting Hole: D3.218 .437 HEX NUT .687 HEX NUT .500-28UNEF-2A .625 HEX NUT Refer to Cable Group Tables, pages 74-91. "D" mounting holes are on page 54. Note: Only 30 Series have two-pin polarizations. Note: These connectors are still available, although we recommend using concentric (70 series) twinax for all new applications. TWINAX/TRIAX CONNECTORS .806 COAX CONNECTORS Coax Connectors / BNC Coax Connector Introduction Trompeter's BNC Coax Tool Crimp Connector 19 reasons why our BNC connectors outperform the competition every time! Tested and 2 1 approved to NEBS Level 3 Type 2. Stepped crimp sleeve grips the outer jacket, increasing connector-tocable pull strength reliability. Unique plating flow hole 3 ensures uniform interior plating. Captive center contact provides 6 positive tactile installer feedback for error-free assembly. Tapered ferrule facilitates connector 5 insertion under the braid. Foil, if any, is positioned inside the ferrule. Exterior ferrule surface delivers superior cable 4 retention without braid breakage. 7 Also prevents pin movement 360 ferrule improves 9 connector-to-cable tensile strength when cable is flexed. 10 Generous capture cone design ensures 8 easy insertion of center conductor. Unique locking center contact design for high contact retention. 50-millionths gold plating 13 improves durability over Spring-loaded coupling ring uses a beryllium-copper crescent washer to assure 11 positive electrical mating. thousands of mating cycles. 14 This coupling ring also 12 avoids compression set Nickel, non-tarnish issues over time. finish adds to the endurance and 15 reliability of this rugged connector. 16 Fully enclosed metal outer conductor is an 18 integral part of a rugged construction, important for handling the stress of cable weight over time. 17 Also provides superior electrical conductivity for exceptional signal quality (true 75-ohm). Beryllium Copper spring fingers for high mating cycle life and repeatability. Machined solid PTFE insulator for superior RF electrical performance. 19 Spring fingers are plated with nickel for superior wear properties over repeated matings. BNC Coax Wrench Crimp Connector Wrench Crimp Features * 3-piece construction * Captive center contact pin in cone assembly * Spring-loaded coupling ring using a beryllium-copper crescent washer * Freely rotating captured insert inside the clamp-nut assembly * Stepped captured insert inside the clamp-nut assembly * 360 metal-to-metal, sandwich braid capture of the outerbraid-to-cone assembly. (No insulation between the clamping surfaces) * Machined barb on the end of the cone assembly Hermetically Sealed Coax Connectors available, contact customer service. 26 SureNotchTM BNC The UPL220 Series and the UPL250 Series feature SureNotchTM, Trompeter's innovative solution for incomplete connector mating. SureNotchTM provides immediate and reliable visual confirmation of secure mating. The UPL250 Series Mini-BNC Series allow higher interconnect density, enabling 40% more interconnects in the same area, with all the positive characteristics of the full size BNC. * Telco BNC * SureNotchTM BNC provides visual indicator that every BNC is locked onto the mating jack * Black spring water highlights the notch * Standard feature on all Trompeter Telco 75 Ohm BNC's Coax Connectors / Miniature Coax 20/220 Series BNC Plugs & Jacks Cable Plug Cable Jack 1.132 Tool Crimp .632 50........ PL22075...... UPL220- .997 .096 Wrench Crimp CONTACT PIN 27 50................................. CJ2075............................... UCJ20CRIMP SLEEVE .500 FLATS .600 DIA MAX .593 DIA MAX Cable Plug .437 HEX Cable Jack .931 .096 Wrench Crimp 1.208 Tool Crimp 50........... PL2075......... UPL20- .708 50................................ CJ22075.............,................ UCJ220- .593 DIA MAX .437 HEX NUT .437 WRENCH FLATS .606 DIA MAX Bulkhead Plug Bulkhead Cable Jack Front Mount, Solder Pot Rear Tool Crimp 50.................................................... PL21 75.................................................. UPL21 50................................. BJ22075............................... UBJ220- .642 .420 CRIMP SLEEVE .380 DIA .4375-28UNEF-2A 1.020 1.220 Mounting Hole: D3.100 1.089 .078 .687 HEX NUT .400 .250 BNC Adapter .987 Male to Female Right Angle ACCEPTS .064 DIA CONDUCTOR Mounting Hole: C2.085 75 BNC..................... UADRMF220 1.100 .500 HEX .375-32UNEF-2A .437 WRENCH FLAT Cable Plug BNC "T" Adapter 90 Right Angle, Full Crimp 50.................................... BN23 75.................................. UBN23 75....................................... UPLR22045 Angle, Full Crimp .890 1.080 75...................................... UPLFF2201.100 1.300 BNC Coupling Adapter 1.100 .593 MAX 1.600 Barrel connector 50.................................. AD228 75................................ UAD228 .444 DIA 1.900 MAX 1.284 .848 .430 .808 .433 MAX .424 CONTACT PIN 45 .380 CRIMP SLEEVE .593 MAX .444 DIA CONTACT PIN CRIMP SLEEVE Refer to Cable Group Tables, pages 74-91. "D" mounting holes are on page 54. COAX CONNECTORS 1.325 MAX COAX CONNECTORS Coax Connectors / Miniature Coax 20/220 Series BNC Bulkhead Jacks Insulated Bulkhead Cable Jack Non-insulated Bulkhead Jack Wrench Crimp, Rear Mount Feed-through 50............................................... BJ2675............................................. UBJ26- 50................................................... BJ224 75................................................. UBJ224 .500-28UNEF-2A 1.000 .790 .562 HEX NUT .096 .510 .505 O.380 TYP Mounting Hole: D2.187 GF-Ground filter version page 35 .437 HEX .830 DIA MAX .625-24UNEF-2A .750 HEX NUT .448 .443 .060 .584 RECOMMENDED PANEL CUTOUT 1.284 .015 Mounting Hole: DD3.156 Insulated Bulkhead Jack Insulated Bulkhead Jack Front Mount, Solder Pot Recessed Insulated Adapter (RIA) Feed-through 50................................................... BJ227 75................................................. UBJ227 75.......................................... UBJ224-RIA .096 .562 HEX NUT 2X 1.060 O.180 .050 .471 .750 2X O.380 ACCEPTS .060 DIA CONDUCTOR .710 .99 Mounting Hole: D3.147 .500-28UNEF-2A .562 HEX NUT .562 HEX NUT 2X O.108 THRU 1.304 1.000 .806 Bulkhead Cable Jack .096 .884 1.19 Bulkhead Jack 1.058 Front Mount, Solder Pot Rear Mount, Wrench Crimp .425 .046 50.......................... BJ20 75........................ UBJ20 50.......................... BJ2975........................ UBJ29- ACCEPTS .060 DIA CONDUCTOR w/Solder Lug .437HEX Mounting Holes: D3.218 (D2.218-Cable Groups 6, 6E,51,52) .687 HEX .500-28UNEF-2A .625 HEX 50....................... BJ20SL 75..................... UBJ20SL .468 HEX Mounting Hole: D5.125 Bulkhead Jack Insulated Bulkhead Jack Non-insulated Feed-through 1.060 50.......................... BJ23 75........................ UBJ23 2X O.380 SOLDER POT ACCEPTS .060 DIA CONDUCTOR .380 DIA Mounting Hole: DD3.156 .060 Rear Mount, Solder Pot 50.......................... BJ21 75........................ UBJ21 .562 HEX .500-28UNEF-2A O.562 50.......................... BJ228 75........................ UBJ228 .757 Mounting Hole: D3.147 Insulated Bulkhead Cable Jack .500 HEX .375-32UNEF-2A .562 HEX .562 HEX NUT .500-28UNEF-2A .42 1.284 Mounting Hole: D3.147 Bulkhead Jack .562 HEX .500-28UNEF-2A 50.......................... BJ24 75........................ UBJ24 Refer to Cable Group Tables, pages 74-91. "D" mounting holes are on page 54. 50.......................... BJ28 75........................ UBJ28 .380 DIA TYP Mounting Hole: DD3.100, (Hermetically sealed version available, call customer service). 28 Insulated Bulkhead Jack Feed-through Feed-through Non-insulated .700 1.280 .584 1.284 .046 .505 .380 DIA TYP .562 HEX Mounting Hole: D3.156 (Hermetically sealed version available, call customer service). GF-Ground Filter version available page 370c . .562 HEX NUT .500-28UNEF-2A Coax Connectors / Coax 20/220 Series Circuit Board Jacks 29 Edge Mount Circuit Board Jacks Trompeter manufacturers a wide selection of circuit board jacks. Decibels (dB) 10 dB/ Ref 0 dB 50 MARKERS: 40 1: -30.906 dB @ 1.000 GHz 30 2: -33.549 dB @ 1.5 GHz 20 3: -31.237 dB @ 2 GHz 10 4: -19.657 dB @ 2.960 GHz 0 -10 -20 4 1 -30 -40 3 2 -50 STOP 2.999973 MHz G START 14.925373 MHz Frequency in MHz Circuit Board Edge Mount Coax "BNC" Style Receptacle 75 Part Number UCBJE20-1 UCBJE20-2 1.003 .723 BOARD THICKNESS Board Thickness .060-.064 .028-.033 O.400 .250 Circuit Board Bulkhead Edge Mount Max Panel Thickness: .179 Board Thickness .060-.064 .028-.033 .084 .120 RINSE NOTCH O.412 Coax "BNC" Style Receptacle 75 Part Number UCBBJE20-1 UCBBJE20-2 UCBBJE20-3 UCBBJ320-4 (.021) .500-28UNEF-2A 1.003 (.021) .713 .430 BOARD THICKNESS .562 HEX NUT .500 O.510 O.505 .447 .443 RINSE NOTCH .250 COAX CONNECTORS COAX CONNECTORS Coax Connectors / Coax 20/220 Series Circuit Board Jacks Trompeter manufacturers a wide selection of circuit board jacks, Shown below are the most commonly requested designs. For custom designs, contact customer service. Circuit Board Jack Circuit Board Jack Straight, 4-leg Straight, 3-leg 75............................................... UCBJ20F 75............................................... UCBJ223 (.850) .055 .047 DIA 5 HOLES .500 .591 TYP TYP O.062 DIA 3 HOLES .815 .043 DIA 4 PLACES .013 TYP .045 DIA .502 .498 TYP .090 .156 TYP 120 TYP O.340 DIA BC .380 DIA TYP O.047 DIA .013 .560 .200 TYP Circuit Board Jack Right Angle Coax BNC Straight, 3-leg Circuit Board Jack 50................................................... CBJ20 50.............................................. CBJR220 75............................................ UCBJR220 1.090 .885 O.062 DIA 3 HOLES .722 .129 .380 DIA .156 TYP 120 TYP .030 .131 .040 TYP .129 O.047 DIA Circuit Board Jack .258 .258 O.340 DIA BC .380 DIA TYP .029 .062 .430 Circuit Board Jack Straight, 4-leg Right Angle, Tall Version 50................................................... CBJ22 50.............................................. CBJR20A 75............................................ UCBJR20A .722 .188 TYP .380 DIA TYP .156 TYP .047 DIA MODEL NO. CBJR20 UCBJR20 LTR OHM A B C D E CODE DIM DIM DIM DIM DIM 50 .046 .24 .090 .050 .0625 75 .029 .24 .090 .050 .0625 .062 DIA 4 HOLES MODEL NO. CBJR20A UCBJR20A LTR OHM A B C D E CODE DIM DIM DIM DIM DIM A 50 .046 .34 .090 .058 .070 A 75 .029 .34 .090 .058 .070 .030 TYP .380 DIA B TYP C TYP 1.054 .030 .890 .030 MODEL NO. CBJR20 UCBJR20 Circuit Board Jack Straight, 4-leg MODEL LTR OHM A B C D E CODE DIM DIM DIM DIM DIM 50 .046 .24 .090 .050 .0625 75 .029 .24 .090 .050 .0625 LTR OHM NO. CODE 75............................................... UCBJ224 CBJR20A A UCBJR20A .188 TYP .047 DIA .380 DIA TYP 30 .156 .062 DIA 4 HOLES .258 TYP .13 TYP D TYP .030 TYP .258 B TYP A B C D E DIM DIM DIM DIM DIM .046 .34 .090 .058 .070 .029 .34 .090 .058 .070 .258 TYP .040 E TYP .380 DIA .258 C TYP .815 .013 TYP A 50 75 1.054 .030 .890 .030 .258 TYP .13 TYP D TYP .258 TYP .040 TYP A Coax Connectors / Coax 20/220 Series Circuit Board Jacks Non-insulated Circuit Board Bulkhead Jack Insulated Circuit Board Bulkhead Jack Straight, 4-leg Straight 75............................................... UCBBJ29 50................................................. CBBJ26 .156 TYP 1.388 .425 .557 1.332 .013 .380 DIA .414 MIN .200 .0390 DIA .557 .013 TYP .177 .047 .0935 DIA 4 PLACES .200 .400 TYP .687 DIA .562 HEX NUT .0935 DIA 4 PLACES .128 .354 TYP .158 TYP .500-28UNEF-2A .564 HEX NUT Mounting Hole: D3.109 .630 DIA MAX WASHER Mounting Hole: D3.156 .562 DIA Right Angle Circuit Board Bulkhead Jack Non-insulated Insulated 50.............................................. CBBJR26 75............................................ UCBBJR26 50.............................................. CBBJR29 75............................................ UCBBJR29 CBBJR29 UCBBJR29 CBBJR29A UCBBJR29A LTR CODE ----- A IMPD A DIA 50 .046 75 .029 50 .046 75 .029 B DIM C DIM D DIM E DIA MODEL # LTR CODE CBBJR26 .24 .090 .050 .0625 .24 .090 .058 .070 ----- UCBBJR26 CBBJR26A A UCBBJR26A RoHS Compliant RoHS Compliant Non-insulated Insulated 6-0001-1 6-0001-2 6-0001-3 6-0001-4 LTR CODE ----- A IMPD A DIA 50 .046 75 .029 50 .046 75 .029 B DIM IMPD A DIA 50 .046 75 .029 50 .046 75 .029 B DIM C DIM D DIM E DIA .24 .090 .050 .0625 .34 .090 .058 .070 B DIM C DIM D DIM E DIA .24 .090 .050 .0625 .34 .090 .058 .070 50......................................... CBBJR26-RC 75....................................... UCBBJR26-RC 50............................................. 6-0001-1 75............................................. 6-0001-4 MODEL # .177 .562 HEX Right Angle Circuit Board Bulkhead Jack MODEL # 31 C DIM D DIM E DIA MODEL # LTR CODE CBBJR26- RC .24 .090 .050 .0625 .24 .090 .058 .070 ----- UCBBJR26- RC CBBJR26A-RC A UCBBJR26A-RC IMPD A DIA 50 .046 75 .029 50 .046 75 .029 1.237 Mounting Holes: D3.156 (Insulated) Maximum Panel Thickness: .179 D-Hole: D3 1.074 .773 .046 .649 ACROSS POINTS .593 DIA .258 E DIA TYP B TYP .380 DIA .258 .030 TYP A DIA .500-28UNEF-2A .13 TYP .562 HEX NUT .040 TYP .258 TYP .124 D TYP .258 TYP C TYP Mounting Holes: D3.156 (Insulated) Circuit Board Jacks Circuit Board Mounting Mini-WECo Patch Jack 75 Right Angle......... CBJR12 1.76 .44 DIA 1.46 MODEL NO. CBJR12 CBJR12A .0625 DIA .030 TYP LTR B CODE DIM .24 A .34 .070 DIA TYP .397 TYP B B=.24 .058 TYP .120 TYP .050 DIA .600 TYP .156 TYP .1985 .040 TYP .397 TYP .400 .200 COAX CONNECTORS Coax Connectors / Mini-WECo Coax COAX CONNECTORS Coax Connectors / Miniature Coax 250 Series Mini-BNC Plugs & Jacks The mini-BNC 250 RF connector series from Trompeter was designed specifically for DS3 telco coaxial central office applications to allow higher interconnect density while preserving the positive characteristics of the Trompeter full size BNC. In fact, the 250 series provides for higher density of interconnects in a given area. Miniature BNC (M-BNC) Coaxial Plug Miniature BNC (M-BNC) Coaxial Bulkhead Jack Straight Straight 75......................................... UPL250- 75.......................................... UBJ250- .643 .010 O.507 .500 .500 .530 O.437 NOTE: All UPL250 plugs come with our SureNotchTM feature. O.300 Miniature BNC (M-BNC) Coaxial Circuit Board Jack Miniature BNC (M-BNC) Circuit Board Jack Straight Right Angle 75........................................... UCBJ250-N 75........................................... UCBJ250-G 75......................................... UCBJR250-N 75......................................... UCBJR250-G .608 .308 .355 .365 .157 .295 .424 O.295 .295 .409 .259 .015 .308 .015 .157 Part Number Description Plating UPL250UPLR250UBJ250UCBJ250-G UCBJ250-N UCBBJ250-G UCBBJ250-N UCBJR250-G UCBJR250-N UCBBJR250-G UCBBJR250-N UCBJE250-1 UCBJE250-2 UCBBJE250-1 UCBBJE250-2 UAD258 Straight plug M-BNC series Right angle plug M-BNC series Bulkhead cable jack Straight PCB-mounted jack Straight PCB-mounted jack Straight PCB-mounted jack Straight PCB-mounted jack Right angle PCB-mounted jack Right angle PCB-mounted jack Right angle PCB-mounted jack Right angle PCB-mounted jack PCB-edge mounted SMT jack PCB-edge mounted SMT jack PCB-edge mounted SMT jack PCB-edge mounted SMT jack M-BNC jack to M-BNC jack adapter, Barrel adapter Terminators Terminators BNC to MBNC adapters M to F BNC to MBNC adapters M to F BNC to MBNC adapters M to F ni ni ni au ni au ni au ni au ni au au au au ni Bulkhead Mount n/a n/a yes no no yes yes no no yes yes no no yes yes yes ni ni ni ni ni no no no no no UTNAF250 UTNAM250 UADF20M250 UADF20F250 UADF250M20 Refer to Cable Group Tables, pages 74-91. 32 "D" mounting holes are on page 54. PCB OA Thickness 4"x4" 0.032 0.064 0.032 0.064 Coax Connectors / Miniature Coax Threaded 40/240 Series TNC Cable Plug Cable Jack Wrench Crimp Wrench Crimp 50.............................................. PL4075........................................... UPL40- 50.............................................. CJ4075........................................... UCJ40- .437 OR .500 WRENCH FLATS AND NUT .997 33 .437 HEX .4375-28UNEF-2A .645 DIA MAX .096 .960/1.001 .096 Cable Plug Cable Jack Tool Crimp 50........................................... PL24075......................................... UPL240- Tool Crimp 50............................................ CJ24075.......................................... UCJ240- 1.140 1.208 .708 .640 CRIMP SLEEVE .593 DIA MAX .650 DIA MAX CJ240-001 SHOWN .4375-28UNEF-2A Insulated Bulkhead Jack TNC Coupling Adapter Feed-Through Barrel Connector 50.................................................... BJ48 75.................................................. UBJ48 50................................................... AD48 75................................................. UAD48 1.280 1.282 .505 .046 .381 .4375.28UNEF-2A TYP .500-28UNEF-2A .562 HEX NUT .562 HEX Mounting Hole: D3.156 GF-Ground filter version page 41 COAX CONNECTORS Refer to Cable Group Tables, pages 74-91. "D" mounting holes are on page 54. COAX CONNECTORS Coax Connectors / Miniature Coax Threaded 40/240 Series TNC Bulkhead Jacks Insulated Bulkhead Jack Bulkhead Jack Rear Mount, Solder Pot Solder Pot 50..................................................... BJ41 75................................................... UBJ41 50..................................................... BJ40 75................................................... UBJ40 1.060 1.058 .046 .425 .757 SOLDER POT ACCEPTS .060 DIA CONDUCTOR SOLDER POT ACCEPTS .060 DIA CONDUCTOR .382 .378 DIA .380 DIA Mounting Hole: D5.125 .375-32UNEF-2A .4375-28UNEF-2A .500-28UNEF-2A .562 HEX NUT .562 HEX NUT .4375-28UNEF-2A .500 HEX NUT Mounting Hole: D3.147 Insulated Bulkhead Jack Rear Mount, Wrench Crimp 1.000 .471 Front Mount, Solder Pot 50............................................... BJ4675............................................ UBJ46- 50................................. BJ47 75................................. UBJ47 .830 .790 1.060 Insulated Bulkhead Jack SOLDER POT ACCEPTS .060 DIA CONDUCTOR Mounting Hole: D3.147 .096 Mounting Hole: D2.187 GF-Ground filter version page 40. .437 HEX .687 HEX .625-24UNEF-2A .750 HEX NUT .4375-28UNEF-2A .500-28UNEF-2A .562 HEX NUT .562 HEX NUT Bulkhead Cable Jack 1.000 Wrench Crimp .806 50................................... BJ4975................................. UBJ49- Insulated Circuit Board Jack .437 HEX Mounting Hole: D3.218 / D2.218 (Cable Groups 6, 6E,51,52) Right Angle 50............................................... CBBJR46 75............................................ UCBBJR46 50............................................ CBBJR46A 75.......................................... UCBBJR46A .687 HEX .500-28UNEF-2A .625 HEX .4375-28UNEF-2A 1.625 Bulkhead Cable Jack "A" refers to tall versions 1.000 Tool Crimp MODEL LTR NO. CODE CBBJR46 UCBBJR46 CBBJR46A A UCBBJR46A A OHM 50 75 50 75 A DIM .046 .029 .046 .029 .096 B DIM .24 .24 .34 .34 C DIM .090 .090 .090 .090 D DIM .050 .050 .058 .058 .806 .437 HEX 50................................. BJ249- E DIM .0625 .0625 .070 .070 .750 DIA Mounting Hole: D3.218 D2.218 (Cable Groups 6,6E,51,52) 1.237 1.074 .773 .649 ACROSS POINTS B TYP .380 DIA .258 TYP 50............................................... CBBJR49 75............................................ UCBBJR49 .13 TYP .258 TYP .124 .258 D TYP C TYP Circuit Board Jack Bulkhead Mount Right Angle .030 TYP .4375-28UNEF-2A .500-28UNEF-2A .562 HEX NUT E DIA TYP .625 HEX NUT .4375-28UNEF-2A .593 DIA .046 .040 TYP MODEL LTR OHM A B C D E NO. CODE DIM DIM DIM DIM DIM CBBJR49 50 .046 .24 .090 .050 .0625 UCBBJR49 75 .029 .24 .090 .050 .0625 CBBJR49A A 50 .046 .34 .090 .058 .070 UCBBJR49A A 75 .029 .34 .090 .058 .070 .258 TYP Mounting Hole: D3.156 1.237 1.074 A DIA .773 .380 DIA .258 TYP E DIA TYP .258 A DIA .593 DIA .046 .649 ACROSS POINTS B .030 TYP .4375-28UNEF-2A .500-28UNEF-2A .562 HEX NUT CBBJR49 SHOWN 34 "D" mounting holes are on page 54. .13 TYP .258 TYP .124 D C .040 TYP Add "A" for tall versions Mounting Hole: D3.230 .258 TYP Coax Connectors / Push-on Coax 120 Series 35 These BNC/TNC push-on jacks and plugs are designed for (U)PL123 blind mate rack and panel applications. The male plugs mate (U)PL122 with any BNC/TNC jack and are ideally suited for test/cable applications. Panel Plug Bulkhead Jack Front Mount, Solder Pot Front Mount, Solder Lug 50................................................... PL121 75................................................. UPL121 50................................................... BJ120 75................................................. UBJ120 W/Solder Lug W/Solder Lug 50............................................... PL121SL 75............................................. UPL121SL 50............................................... BJ120SL 75............................................. UBJ120SL 1.060 .875 .628 .150 SOLDER CUP ACCEPTS .068 DIA CONDUCTOR Mounting Hole: C2.093 .450 SOLDER POT ACCEPTS .055 DIA CONDUCTOR; (.025 DIA FOR UBJ120) .550 DIA Mounting Hole: C1.120 .437 HEX .437 WRENCH FLATS .3125-32UNEF-2A 3/8 WRENCH FLATS .375 WRENCHFLATS .500 HEX Panel Plug Cable Plug Rear Mount, Cable Entry Wrench Crimp 50............................................ PL12275.......................................... UPL122- 50............................................ PL12375.......................................... UPL123- .906 .906 .115 .437 HEX .096 Mounting Hole: DD5.187 .500 HEX .468-32 SPECIAL .562 HEX NUT .437 WRENCH FLATS BODY .500 DIA .096 Cable Plug Tool Crimp 50............................................ PL22375.......................................... UPL2231.107 .607 .349 DIA COAX CONNECTORS "D" mounting holes are on page 54. COAX CONNECTORS Coax Connectors / 1023 Series 1.0/2.3 DIN Connectors - 75 Trompeter's DIN connector series, is manufactured to the DIN 47297 (75 ) interface specification. This range of Trompeter's DIN 1.0/2.3 connector are 45% smaller than the DIN 1.6/5.6 and is ideal for higher density patching requirements. With this space savings, significantly more ports can be placed in the same 1RU panels. The Trompeter 1.0/2.3 series includes cable plugs, cable jack and Type N to DIN adapters. Trompeter's 1.0/2.3 series works with all of the most popular cables used in the video distribution and telecom central office environments and can rapidly be adapted to suit any coaxial cable developments. This line of 1.0/2.3 connectors delivers the same superior quality performance of the industry leading Trompeter 220 Series BNC range. Employing the same tooling and termination as the 220 series BNCs ensures a minimal deployment cost and disruption for our customers. Right Angle Crimp Plug Straight PC Bulkhead Mount Jack UPLR1023- UCBBJ1023 21 17.5 4X 0.9 0.5 20 12 M5.5X0.5 5.1 O 0.9 O 7.3 Dimensions are in mm 15 12.7 2.3 Dimensions are in mm O 5.40 Adapter 75 Ohm Type N Plug to DIN 1.0/2.3 Jack Straight Crimp Plug UADF1023M95 UPL1023- 21 32 24 12.7 11.4 O 8 O 1 Dimensions are in mm Dimensions are in mm DIN 1.0/2.3 Bulkhead Jack UBJ102324 12.7 DIN 1.0/2.3 Right Angle PCB Bulkhead Mount Jack UCBBJR1023 13.25 O 7.3 O 5.4 O 1 21 17 M 5.5 X 0.5 7.4 3.7 3.0 4X O 7.3 O 0.80 0.81 5.08 Dimensions are in mm Refer to Cable Group Tables, pages 74-91. 36 Dimensions are in mm Coax Connectors / 110 Series 1.6/5.6 DIN Connectors Trompeter's 110 series connectors are 30% smaller than the standard BNC currently used for the Coax Central Office termination. With this space savings, 72 interconnects can be placed in the same 1 rack unit panels as 52 BNCs. The 110 series of connectors is available in the following: cable plug, cable jack, a U-Link for connecting two jacks, a right angle circuit board jack, and BNC to DIN adapters. RF Coaxial 75 Ohm DIN Dual Coaxial DIN Connector "U-Link" 75 Ohm With Two Plugs Threaded Full Crimp Cable Plug 37 Trompeter's 110 series works with all the cables currently in use in the central office environment and like all Trompeter connectors, can be made to accommodate any coax cable changes. Based on 169-13 Specification UPL110- 105-1496 .939 .015 C R IMP S LE E V E .590 .010 O.410 .300 .488 .580 P IN C ONTAC T .500 .634 .380 1.084 RF Coaxial 75 ohm DIN .450 Jack Threaded Connector MEETS REQ OF IEC 169-13 UBJ110- .375 INS ULATOR WAS HE R S .990 1.003 .010 .573 B ODY AS S Y S OC K E T C ONTAC T M9 X 0.50 LOC K NUT .500 .579 C R IMP S LE E V E S UP P OR T R ING Adapter 75 ohm BNC Jack to 75 ohm DIN Plug Adapter 75 ohm BNC Plug to 75 ohm DIN Jack UADF20M110 UADM20F110 O.410 O.593 MAX B NC P LUG DIN J AC K O.380 O.322 B NC J AC K DIN P LUG .580 .471 (1.530) Refer to Cable Group Tables, pages 74-91. COAX CONNECTORS 1.263 COAX CONNECTORS Coax Connectors / Coax Type N Connectors 90 Series Trompeter's 90 Series incorporates many of the features of our BNC lines including 3-piece wrench crimp configuration, gold plated captive center contacts, beryllium copper female contacts, and PTFE dielectrics. The 90 Series will also accommodate non-flammable plenum coax cables. Cable Plug Bulkhead Cable Jack Wrench Crimp Wrench Crimp 50.............................................. PL9575............................................ UPL95- 50.............................................. BJ9575............................................ UBJ951.392 .500 OR .688 WRENCH FLATS .828 DIA MAX .462 .438 OR .625 FLATS Large body versions are available, contact customer service. Size depends on cable group. .094 .250 .800 DIA .312 FLATS .096 OR .130 Mounting Holes: DD4.310 (Standard body) DD1.310 (Cable Groups -6A/6B/6E, -48, -50) .437 HEX NUT 1.274 OR 1.336 .625-24 UNEF-2A .750 HEX NUT Adapter Bulkhead Jack BNC Female to N Female Solder Pot 50................................................... AD95 75................................................. UAD95 50....................................................... J95 75..................................................... UJ95 .625-24UNEF-2A 1.287 3/4 HEX NUT .587 .406 SOLDER POT ACCEPTS .064 DIA WIRE Mounting Hole: DD4.310 Mounting Hole: D5.310 3/4 HEX 1.863 .375-32UNEF-2A .625-24UNEF-2A .500 HEX NUT Insulated Adapter Feed-thru Jack BNC Female to N Mail 50.................................................. BJ98-2 75............................................... UBJ98-2 50.................................................. ADI95 75................................................ UADI95 .875 MAX 1.860 .833 BJ98-2 Shown Mounting Hole: DD4.50 Options available for panels up to 2.25" thick. Call customer service. Mounting Hole: DD4.203 .562 WRENCH FLATS .625-24UNEF-2A .750 HEX NUT Refer to Cable Group Tables, pages 74-91. 38 .625-24UNEF-2A .750 HEX NUT TYP "D" mounting holes are on page 54. .50 1.75 Coax Connectors / Coax F Type Connectors 130 Series Type F Adapter Between Series Coaxial Female AD131 BNC to Male F Type Adapter 39 75............................................... AD1300 1.290 .662 1.06 .03 F Type Jack .371 AD1300 75 OHM Coaxial Female BNC to Male F Type Adapter .312 WRENCH FLATS .375-32-2A TYP .437 HEX O.50 BNC Plug .437 HEX AD1300 BNC to F Type Adapter AD133 BNC MALE TO F TYPE FEMALE ADAPTER Circuit Board Edge Mount F Type Style Female Jack CBJE130-1, -2, or -3 1.000 .650 PART NO BOARD THICKNESS CBJE130-1 CBJE130-2 CBJE130-3 .060 - .064 .028 - .033 .090 - .094 BOARD THICKNESS O.045 .384 .380 .316 .312 .304 RECOMMENDED CUT-OUT .250 .375-32UNEF-2A O.400 "D" mounting holes are on page 54. COAX CONNECTORS Note: This circuit board jack meets SCTE IPS-SP-401 and has a Return Loss of <-221B at 2 GHz. COAX CONNECTORS Coax Connectors / Coax F Type Connectors 130 Series Trompeter's 130 Series Coax F Type Connectors meet SCTE-IPS-SP-4-1 and have a Return Loss of <-22 dB at 2 GHz. 75 Ohm Male Type F Type Coaxial Cable Plug PL130C-(see dash number from chart on right) 1.604 .030 7/16 HEX -F1 SHOWN 75 Ohm F Type Tool Crimp Plug PL130SC-(see dash number from chart on right) .856 .018 .556 .015 7/16 (.4375) HEX NUT DASH NO CABLES ACCOMMODATED A HEX -001 -002 RG-178, -196 HEWLETT PACKARD 8120 - 1107 .178 .197 -003 -004 -005 RG-174, 316 RG-179, 187 NORTHERN ELECTRIC .178 .178 .197 -006 DBL - SHLD RG-187 GC875GPI, GRUMMAN DBL - SHLD RG-188 .197 -007 -008 275-3991, MICRODOT RG-195, -180 .178 .178 421-111, ESSEX -009 75 Ohm Right Angle F Type Style Full Crimp Cable Plug PLR130SC-(see dash number from chart on right) 1.054 .030 1.030 .030 40 .500 8218, BELDEN YR23023 BELDEN .178 21-597, ESSEX -011 .213 -013 RG-58, RG-141, RG-303, TCC-50-2 RG-59 -013A -013B -014 TCC-75-2 RG-62 8212, BELDEN .255 .255 .255 -015 -015A -016 730A, LUCENT RG-71 724, LUCENT .290 .290 .324 -017 -018 -019 -020 -021 -022 -023 -024 -025 -026 -027 8281, BELDEN RG-6 9268, BELDEN 8279, BELDEN 9248, BELDEN 88240, BELDEN 88241, 88269, BELDEN 89108, BELDEN 89120, BELDEN 734A, LUCENT 735A, LUCENT KS19224L2, LUCENT .344 .255 .255 .290 .213 .255 .255 .290 .255 .178 .178 .255 Coax Connectors / Low VSWR Connectors Type N Plug Patch Jack Patch Plug Patch Plug 41 Trompeter's 50 low VSWR (1.11:1) patching system has been developed for use at frequencies up to 3 GHz and at power levels up to 500 watts. J94 jack accepts a Type N male plug in back and the PL93 or PL94 in the front of the panels shown, or a custom panel of your own design. Patch plugs incorporate a push-fit design that snap into position in the jack and are available with, or without a bayonet locking feature. Normal jack spacing is 3" center-to-center. For a minimum bend radius when patching adjacent jacks, use Trompeter standard patch cords made with RG8 cable with a minimum length of 14". Otherwise the minimum length is 18". Panels loaded at no additional cost. Patch Plug 50, without Locking Sleeve 50, with Locking Sleeve PL93- PL94.687 WRENCH FLAT .625 WRENCH FLAT .625 WRENCH FLAT .687 WRENCH FLAT .760 DIA .750 DIA .81 .81 2.12 2.12 .130 .130 Patch Cords Patch Cords 50, Patch Plug without Locking Sleeve 50, Patch Plug with Locking Sleeve PCH-L-50 PCHY-L-50 "L" LENGTH "L" LENGTH Patch Jack to Type N Jack Panels for J94 50 Threaded .62524UNEF-2A J94 .625-24UNEF-2A 1.000 DIA 3/4 HEX .140/.036 DIA HOLE .380/.370 .535 Notching Panel Type Height Part# 12 Open Common Ground A= 1.75" JSH-12 12 Closed Insulated A= 1.75" JSHI-12 24 Open Common Ground B= 5.25" JSH-24 24 Closed Insulated B= 5.25" JSHI-24 .640/.630 Mounting Hole: CC1.312 .92 .100 # of Holes 1.82 A Looping Plug 50 - Green Handle .852 3.250 4.000 3.000 B 2.000 HOLE 4.402 "L" replace with length in inches. "D" mounting holes, page 54. For standard panels see page 53. COAX CONNECTORS LPH-50 COAX CONNECTORS Coax Connectors / 50 Subminiature Coax 50 Series TPS/TCM Jacks & Plugs Cable Plug Bulkhead Jack Wrench Crimp Front Mount, Solder Pot 50 3-Lug..................................... PL50- 50 3-Lug............................................ BJ50 1.000 .080 .748 .402 SOLDER POT ACCEPTS .039 DIA CONDUCTOR PL50-1 Shown Mounting Hole: D6.218 .375 HEX NUT .375 WRENCH FLATS .460 DIA MAX 7/16 HEX 3/8 HEX NUT .3125-32UNEF-2A Cable Plug Bulkhead Jack Wrench Crimp Front Mount, Solder Pot 50 3-Lug................................... PL50C75 3-Lug................................... PL50C- 50 3-Lug........................................... BJ57 .140 DIA .500 HEX NUT 1.143 .560 DIA .643 PL50C-001 Shown .485 DIA MAX .892 SOLDER POT ACCEPTS .039 DIA CONDUCTOR BJ57 Shown Mounting Hole: D4.187 .600 DIA .407 .4375-28UNEF-2A 1.000 Cable Plug Feed-thru Jack Wrench Crimp 50 3-Lug........................................... BJ58 50 3-Lug..................................... CJ5050 4-Lug.................................. CJ50FL50 Threaded............................. CJ350- 1.070 .620 BJ58 Shown Mounting Hole: D5.190 / D4.190 (Threaded) .790 .080 .500 HEX .375-32UNEF-2A 7/16 HEX NUT CJ50-1 Shown .375 HEX NUT .375 WRENCH FLATS .468 DIA MAX Bulkhead Jack Wrench Crimp 50 3-Lug..................................... BJ59.790 .590 .600 DIA Refer to Cable Group Tables, pages 74-91. 42 "D" mounting holes are on page 54. .080 .375 HEX NUT .562 HEX .4375-28UNEF-2A .500 HEX NUT BJ59-1 Shown Mounting Hole: D4.187 Patching Products / High Frequency Video Patching Trompeter's HDVDP and HDVDPM Patch Jacks are designed and engineered to exceed SMPTE 292M specifications for high definition video transmission and connectivity. 43 Full Size Patch-Jack 75 Terminated & Non-Terminated The normal-thru contact interface design of HDVDP/HDVDPM consists of a self-aligning normal-thru U-slot, two redundant points of contact, an independent applied normal force at each contact point, and a mechanical wipe region at each contact interface location. These design attributes provide reliable and repeatable patching/un-patching, resulting in low-level contact resistance stability. HDVDPT Full-size WECo Format Terminated HDVDP Full-size WECo Format Non-terminated HDVDPMT Mini WECo Format Terminated Mini Patch-Jack 75 Terminated & Non-Terminated HDVDPM Mini WECo Format Non-terminated HDVDP/HDVDPM Key Features * Light weight design: * HDVDPT (full size): 48.05 grams * HDVDPMT (mini): 32.1 grams * High-reliability normal-thru contact design * Self-wiping normal thru contact design * Streamlined design for repeatable manufacturability PATCHING PRODUCTS Top View of Normal-Thru Contact Interface (2x) PATCHING PRODUCTS Patching Products / High Frequency Video Patching The HDVDPMN is superior quality, high bandwidth, dual video patch jack. This low profile, high performance component is designed for HDTV digital applications where space allocation is critical, such as in video truck application. It is ideal for situations where self-normalling is not practical, usually due to environmental considerations such as high ambient airborne particles or high vibration. HDTV Ready High Frequency 75 Ohm Dual Coaxial Mini-WECo Patch Jack with BNC Receptacles HDVDPMN 3.295 [ 83,69 ] 1.295 [ 32,89 ] When used in conjunction with the LPMWHF looping plug, a "normal-thru" circuit is achieved, which will pass the full 1.485 Gbps of uncompressed data (2.25GHz of frequency) needed for HDTV, with return loss performance which exceeds SMPTE292M requirements. This high performance is maintained when patching from one location to another, using the PCMWB-L patch cord (call customer service). .450 [ 11,43 ] .500 [ 12,7 ] 1.494 [ 37,95 ] .375 [ 9,53 ] 2X O.347 [ 8,81 ] 1.994 [ 50,65 ] 2X .375 [ 9,53 ] HDTV Ready High Frequency 75 Ohm Dual Coaxial WECo Patch Jack with BNC Receptacles HDVDPN 2X O.447 [ 11,35 ] 2X O.156 [ 3,96 ] 2X .075 [ 1,91 ] 1.375 [ 34,93 ] 1.177 [ 29,9 ] 1.635 [ 41,53 ] .625 [ 15,88 ] .600 [ 15,24 ] 2X .570 [ 14,48 ] 2.59 [ 65,9 ] Note: uses the LPW-75 to normalize the circuit 44 BNC RECEPTACLES Patching Products / Coax Patch Jacks & Accessories Patch Jacks J15, J24, J314, and HDVDP can be mounted vertically or horizontally on 5/8" centers. Mounting tabs are normally "backto-back" (as shown below). 45 Adapter Fixed Paralleling 50 BNC - Two Jacks, One Plug PN2C Features * J24 is a high frequency jack w/signals monitoring cabilities 30 BNC JACKS ADAPTER CIRCUIT SCHEMATIC High Frequency Normal-Thru with Monitor Dual Coax Patch Jack J24WMSTHF-75 2.09 To be used with grey aluminum insulated panel..JSIS-72 (see page 57). BNC PLUG .750 2.125 Adapter 2.409 Fixed Paralleling 50 BNC - One Jack, Two Plugs .625 1.600 .500 PN2 BNC RECEPTACLES .156 DIA TYP .592 .487 .570 .562 .625 2.660 1.185 Adapter Fixed Paralleling 50 BNC - Two Jacks, One Plug 1.600 .500 PN2A .592 .625 1.185 SCHEMATIC PATCHING PRODUCTS Standard Panels see pages 51. R-Resistance (1/2W, 1%) PATCHING PRODUCTS Patching Products / Coax Patch Jacks Patch Jack Patch Jack BNC Rear Interface Type N 50 RCA Center Pin - .070"..................... J3 75 WE Center Pin - .090"................... J3W 50 RCA Center Pin - .070"..................... J9 75 WE Center Pin - .090"................ UJ9W .156 DIA MTG HOLE .156 DIA MTG HOLE .570 N TYPE RECEPTACLE .797 Minimum vertical/ .447 .447 DIA horizontal centers .875" J3W Shown .570 2.590 2.366 Patch Jack Patch Jack TNC Solder Pot 50 RCA Center Pin - .070"..................... J5 75 WE Center Pin - .090"................... J5W 50 RCA Center Pin - .070".................. J3D 75 WE Center Pin - .090"................ J3WD .156 DIA MTG HOLE SOLDER POT ACCEPTS .063 DIA WIRE .081 DIA HOLE IN SOLDER LUG (WECo 468 type) .500 DIA TNC RECEPTACLE .500 DIA .164 .200 2.420 2.366 Patch Jack Patch Jack Cable Entry Self-terminating 50 RCA Center Pin - .070"............. J3E75 WE Center Pin - .090"........... J3WE- BNC 50 RCA Center Pin - .070"........ J13-R 75 WE Center Pin - .090".............. J13W-R .156 MTG HOLE .447 DIA .570 WECo 477B Type 1.892 .562 DIA .500 WRENCH FLATS .156 DIA MOUNTING HOLE .375 .812 BNC RECEPTACLE .570 .281 CABLE ENTRY (WECo 447 type) Microswitch not available J3E-1 Shown 46 TNC 50.......................................... J13H-R TNC 75...................................... J13WH-R .560 Standard Panels see pages 51. R-Resistance (1/2W, 1%) .447 DIA 2.866 -30 TYP Patching Products / Standard & Mini-WECo Coax Patch Plugs PL1MWLT-(DASH NO) DASH NO -009 Patch Plug CABLE ACCOMMODATED 8218, BELDEN 21-597, ESSEX YR23023, BELDEN TCC-75-2, TROMPETER 8241F, BELDEN 8212, BELDEN 734A TYPE 735A TYPE KS19224L2 LUCENT Patch Plug -013A Shield Crimp 50 RCA Center Pin - .070" A=2.73" B=1.50"................... PL1C75 WE Center Pin - .090" A=2.45" B=1.22"................. PL1WC- A HEX .178 47 .255 Standard Crimp Plug with Locking Tab -014 .255 -025 PL11SCLT-026 -027 .255 .178 .178 1.876 .437 WRENCH FLATS .312 WRENCH FLATS .375 DIA (WECo 440 type) 1.610 (WECo 358 type) B .299 .297 DIA .508 A .312 HEX .375 HEX Termination Plug Patch Plug No Chain Solder Contact, Crimp Shield CABLE ENTRY 50 RCA Center Pin - .070" A=2.81" B=1.58"...................... TP-1-R PL11CNo Chain 75 WE Center Pin - .090" A=2.45" B=1.25".................... TPW-1-R .437 WRENCH FLATS .312 WRENCH FLATS .375 DIA B 2.099 .299 .297 DIA For other chain options, see page 63. (WECo 340C type) (WECo 440 type) .946 .375 HEX .375 WRENCH FLATS .460 OR .590 DIA MAX A Adapters Adapter Patch Plug to BNC/TNC 75 Miniature Patch Plug to 75 BNC 50 RCA Plug Center Pin .070" 50 BNC A= 2.774"................ AD1 ADMW12 50 RCA Plug Center Pin .070" 50 TNC A= 2.774".............. ADH1 .570 DIA KNURL .500 WRENCH FLATS 75 WE Center Pin .090" 75 BNC A= 2.83"........................ AD1W .946 75 WE Center Pin .090" 75 BNC A= 1.93"................... AD1WHD 75 WE Center Pin .090" 75 TNC A= 2.83"...................... ADH1W .298 BNC (Mini-WECo type) A .471 .375 HEX (WECo 358 type) .375 DIA 2.142 Patch Plug Standard BNC Strip Dimension Crimp Contact, Crimp Shield PL11SC- 1.818 .946 (WECo 440 Type) .298 PATCHING PRODUCTS Refer to Cable Group Tables, pages 74-91. R = Resistance PATCHING PRODUCTS Patching Products / 75 Mini-WECo Coax Patch Jacks Miniature Patch Jack BNC Rear Interface B J11MW C O.347 O.380 .238 Mini-WECo Type A .476 2.210 Miniature Patch Jack B BNC Rear Interface J11MWL .218 C O.347 Mini-WECo Type O.380 A .436 3.280 Patch Plug Miniature Patch Jack Mini-WECo Crimp Plug with Locking Tab Cable Entry, Field Serviceable Mini-WECo Type Centers PL1MWLT- J12- PL1MWLT-(DASH NO) DASH NO -009 -013A -014 -025 -026 -027 O.347 1.828 CABLE ACCOMMODATED 8218, BELDEN 21-597, ESSEX YR23023, BELDEN TCC-75-2, TROMPETER 8241F, BELDEN 8212, BELDEN 734A TYPE 735A TYPE KS19224L2 LUCENT A HEX .178 .128 MTG HOLE .264 .295 .255 .638 .218 .255 .255 .178 .178 .436 .347 DIA .375 WRENCH FLATS Minimum .64" 1.876 1.610 Miniature Patch Jack .299 .297 DIA Solder Pot, Mini-WECo Type .508 J11D 1.761 .312 HEX .375 HEX SOLDER POT ACCEPTS .040 DIA CONDUCTOR CABLE ENTRY .400 MAX 1.403 Patch Plug Mini-WECo BNC Strip Dimension Crimp Contact, Crimp Shield PL1MW1.876 .030 1.568 .030 O.299 O.297 .312 HEX 48 .375 HEX CABLE ENTRY Patching Products / Standard Coax Patching & Looping Plugs Test Point Pinch BNC Monitor 49 Standard Coax Looping Plugs Handle: B=1.51" C=.625" D=1.20" Center Pin 50 RCA Plain .070" LP-Z Pinch .070" LPP-Z Test Point Single .070" LPTP-Z Test Point Dual .070" LP2TP-Z BNC Monitor .070" LPA-Z 2.250 B C TROMPETER ELECTRONICS D Plain Handle Shown Handle: B=1.51" C=1.00" D=1.57" Center Pin 50 RCA Plain .070" LPL-Z Test Point Single .070" LPLTP-Z BNC Monitor .070" LPLA-Z Handle: B=1.25" C=.625" D=1.20" Center Pin 75 WE Plain .090" LPW-Z Pinch .090" LPPW-Z Test Point Single .090" LPWTP-Z Test Point Dual .090" LPW2TP-Z BNC Monitor .090" LPWA-Z Handle: B=1.25" C=1.00" D=1.57" Center Pin 75 WE Plain .090" LPLW-Z Test Point Single .090" LPLWTP-Z BNC Monitor .090" LPLWA-Z Handles are color coded: Green = 50 Violet = 75 PATCHING PRODUCTS Z = denotes impedance of connecting cable in ohms. Audio Patch Cords also available, please call customer service. PATCHING PRODUCTS Coax Connectors / 50 Miniature Coax Patching Miniature Patch Jack Patch Cord TPS Jack 50 Miniature Patch Plugs 3-Lug...................................................... J8 4-Lug.................................................... J8FL 50............................................. PCM-L-50 75............................................. PCM-L-75 TCM Jack 50 Threaded (not shown)......................... J308 TPS RECEPTACLE .343 HEX "L" LENGTH 3125-32-UNEF-2A PER DOD-HDBK-H28 .375 DIA .295 DIA .165 .300 1.362 Miniature Patch Jack Patch Cord Solder Pot 50 50 Miniature Patch Plug to TPS Plug J8D PCMX-L-50 .078 DIA HOLE "L" LENGTH SOLDER POT ACCEPTS .042 DIA CONDUCTOR .3125-32-UNEF-2A .375 DIA .165 1.049 1.366 Miniature Looping Plug Adapter Handle Color: Green = 50............. LPM-50 Handle Color: Violet = 75............. LPM-75 50 Miniature Patch Plug to 50 TPS Jack ADM1 2.800 1.940 2.000 1/4 WRENCH FLATS 11/32 HEX .950 .500 TROMPETER ELECTRONICS .227 DIA Adapter 50 Miniature Patch Plug to 50 BNC Jack ADM2 2.116 1.096 .562 PL3 PATCH PLUG .437 HEX 50 BNC Z = denotes impedance of connecting cable in ohms. L= denotes length in inches. Call customer service for other miniature coax products. Patching Products / Standard Panel Specifications 51 Ordering Loaded Panels Panels can be ordered pre-loaded with any compatible jacks without additional labor charge by using the following part number format (provided the mechanical restrictions are recognized). Example: JSI-48A/HDVDP: Standard 48-hole, Insulated Panel (JSI-48A), loaded with twenty four (24) Standard 75 Patch Jacks (HDVDPT) Trompeter Patch Products Trompeter offers a wide selection of patching products for Military Databus, Telemetry, Telecom, Broadcast, CATV, and Testing. We offer these products for Twinax, Triax, and Coax cabling and in sizes to meet your space restrictions and environmental requirements. Standard 19" Panels Panel Part Number JS: Aluminum (Gray).................................................................... JS JSI: Insulated (Gray).................................................................... (I) JSIB: Insulated (Black)............................................................... (IB) JSIX: Miniature Triax Insulated (Black)....................................... (IX) JSMW: Miniature Coax Insulated (Black)................................ (MW) Jack Part Number............................................................. JACK In popular sizes and configurations Available in insulated black phenolic, and insulated or noninsulated aluminum. Aluminum panels are painted standard gray and come with either a phenolic back bar (insulated type), or an iridited aluminum back bar (non-insulated type). Aluminum panels can be painted to suit, or color matched (special order). Phenolic panels are available in black only. .1875 x .375 Panel Specifications Notching Metal panels (EIA-310-C): Open Phenolic (EIA-310-C): Closed Materials JS Series, Common Ground Panels Non-insulated Aluminum Panel: 6061-T6 Grade Aluminum Backbar: 6061-T6 Grade Aluminum Insulated Phenolic JSI Series, Insulated Panels Nylon Bushing Panels available in heights of 1.75" (1 RU) or 3.5" (2 RU). JSIB Series, Insulated Panels Custom Panels & Marking Panel: Black Arboron Custom panels can be configured to meet your specifications, including special wiring, colors, engraving, or silk-screening (custom marking). Patch jack locations can also be marked on the rear of the panel for easy location of jacks. Please contact your local representative. Hole Plugs For Jacks and Panels Hole Diameter Part Number Miniature Patch Panel (J8) .250" HP250 Miniature Patch Jack (HDVDPM, .304" HP304 .375" HP375 Standard Patch Panel (JS, JSI) .437" HP437 Standard Patch Panel .500" HP500 J11) HP304 HP375 Front Loading Modular Panels are on page 12. HP437 JSMW Series, Insulated Panel Panel: Black Arboron Finishes Standard Finish FED-STD-595-26307, Light Gray Customer Supplied FED-STD-595# or Paint Chip Chemical Film Finish MIL-C-5541, Class 1a (Gold Tone) MIL-C-5541, Class 3 (Clear) Indentification Designation Strip: Passivated Steel Standard Patch Panels: DS1 .580" x 16.6" Standard Patch Panels: DS2 .870" x 16.6" High Density Patch Panels: DS4 .240" x 16.6" Card: Opaque Vinyl Window: Clear Vinyl PATCHING PRODUCTS Hole Plugs For: Standard Patch Jack (HDVDP) Panel: 6061-T6 Grade Aluminum Backbar: XXX Non-hydroscopic Phenolic Jack Insulation: Nylon Sleeves PATCHING PRODUCTS Patching Products / Cable Distribution Panels Distribution Panels Table B: Jack/Panel Compatibility Ordering Loaded Distribution Panels Example: *JS - 52 D3SF7 / (U)BJ28 Panel Type - Table A, Col 2 75 Jacks: 2/3/4 Lug Threaded Mtg Hole 75 Jacks: 2/3/4 Lug Threaded DD4 U AD 95 DD4 U ADI 95 D11 BJ 89 BJ389 DD6 BJ 89, BJ893 D 5SF 5 U BJ 20 DD1 U BJ 95 Large Body BJ389 D 3SF 6 U BJ 21 DD4 U BJ 95 D 2SF 3 U BJ 26 DD4 U BJ 96 D 8SF 12 U BJ 26GF DD4 U BJ 98 D 3SF 7 U BJ 27 D 2SF 3 BJ 101 D 3SF 7 U BJ 28/BJ 24 D 2SF 3 BJ 102 D 8SF 11 U BJ 28GF DD2SF14 BJ 130 D 2SF 3 U BJ 29-6 Large body DD2SF30 BJ 138 D3 UBJ 29 DD2SF30 BJ 139 D 5SF 5 BJ 30 BJ330 D4 BJ 150/FL BJ3150 Mounting Hole - Table B, Col. 1 D3 BJ 31 BJ331 D9 BJ 152/FL BJ3152 Jack Type - Table B, Col. 3/4 ("U" designates 75) D3 BJ 32 BJ332 D 9SF 12 BJ 153/FL BJ3153 *JS- Non-Insulated Panel (Open notch) *JSI- Insulated panel (Closed notch) D 3SF 8 BJ 38 BJ388 D 9SF 12 BJ 154/FL BJ3154 D3 BJ 39 BJ339 D 9SF 12 BJ 154AC/FL BJ3154AC The 19" panels listed in Table A below accommodate the bulkhead jacks designated by a "*" in Panel Columns A- M of Table B to the right. For panel specifications: See page 51-54. D 5SF 5 U BJ 40 D6 BJ 157/FL BJ3157 D 3SF 6 U BJ 41 D 5SF 9 BJ 158/FL D 2SF 3 U BJ 46 D 4SF 4 BJ 159/FL BJ3159 D 8SF 12 U BJ 46GF D 4SF 4 BJ 159AC/FL BJ3159AC D 3SF 7 U BJ 47 D 2SF 3 U BJ 226 D 3SF 7 U BJ 48 D 8SF 12 U BJ 226GF D 8SF 11 U BJ 48GF D3 U BJ 229 D 2SF 3 U BJ 49-6 Large body D 2SF 3 U BJ 246 D 8SF 12 U BJ 246GF 19.00 HORIZONTAL HOLE SPACING D MOUNTING HOLES HEIGHT D3 UBJ 49 D6 BJ 50/FL BJ350 D3 BJ 249 D 4SF 2 BJ 57/FL BJ357 D 4SF 9 - BJ358 D 5SF 9 BJ 58/FL DD8 BJ 450 BJ3450 D 4SF 4 BJ 59/FL BJ359 DD8 BJ 457 BJ3457 D 2SF 8 BJ 72/TL/FL BJ372 DD8SF31 BJ 459 BJ3459 D 2SF 8 BJ 73/TL/FL BJ373 D11 D 2SF24 BJ 74/TL/FL BJ374 D 3SF 7 D 2SF24 BJ 74C/TL/FL BJ374C D 4SF 9 -- D 2SF24 BJ 75/TL/FL BJ375 D 3SF 7 BJ 77/TL/FL BJ377 D 9SF12 GENERIC DISTRIBUTION PANEL VERTICAL HOLE SPACING NUMBER OF HOLES Table A: Panels Panel Type # of Holes Panel Height Hole Spacing - Horiz. JS(I)-12 12 1.75" 1.430" Hole Spacing - Vert. BJ 893 Large body U U BJ2848 Rear mount - BJ3158 BJ4828 Rear mount CBJ155/FL / BJ155 BJ3155 JS(I)-16 16 1.75" 1.000" -- D 4SF25 JS(I)-20 20 1.75" 0.830" -- D 3SF13 BJ 78/TL/FL BJ378 D 5SF10 D 3SF15 BJ 79/TL/FL BJ379 D 4SF25 J 152FLFT D 3SF15 BJ 79C/TL/FL BJ379C D 4SF25 J152FT -- U J 95 JS(I)-24S 24 1.75" 0.723" JS(I)-24W 24 3.50" 1.430" 1.000" D 1SF 1 BJ 80, BJ803 BJ380 DD5SF6 PL 122 JS(I)-32 32 3.50" 1.000" 1.000" D1 BJ 83, BJ833 BJ383 DD8SF31 TBJ 451/FL JS(I)-40 40 3.50" 0.875" 0.875" D1 BJ 88, BJ883 BJ388 JS(I)-40W 40 3.50" 0.830" 1.000" JS(I)-52 52 3.50" 0.675" 1.000" JS(I)-24 24 5.20" 1.450" 2.250" Note: Panels are 19" Insulated or Non-Insulated Standard Gray Aluminum. See chart on the right for loaded panel ordering. "D" hole specifications are on page 54. 52 Mtg Hole J3152FT Patching Products / Standard 19" Panels 1.218 .375 C B .450 DIA THRU C B 53 .450 DIA THRU A FIG A FIG B C B .450 DIA THRU B C .450 DIA THRU .750 A A FIG C FIG D C C B B .358 DIA THRU .358 DIA THRU 128 HOLES A A Miniature 1.25 FIG E C C B B .358 DIA THRU 36 HOLES FIG H .358 DIA THRU 96 HOLES A A FIG I FIG J 19" Miniature Patch panels for: 50 J8 Series, J8D, and 75 Mini-WECo Jacks # of Patch Locations Panel Height Hole Spacing Non-Insulated Part Number Insulated Part Number Jack Type 32 1.75" N/A .500 56 1.75" .500 .500 .500 A JS-32 JSI-32 J8 Series .625 E JSIX-56S Mini-WECo 56 1.75" .500 64 1.75" .500 .500 .625 E JSIX-56SF Mini-WECo .500 .500 E JSIX-64S Mini-WECo 64 1.75" 64 1.75" .500 .500 .500 E JSIX-64SF Mini-WECo N/A .500 .500 A JS-64 JSI-64S J8 Series 64 3.50" .500 .500 .500 E JS-64L JSI-64L J8 Series 64 3.50" .500 .500 .500 E 96 3.50" .500 .500 .500 J 96 3.50" 128 3.50" .500 H A B C Not Shown .500 .500 JSIX-64L Mini-WECo JS-96A JSI-96A J8 Series JS-96B JSI-96B J8 Series JSIX-128 Mini-WECo Miniature 75 Coax Patch Panels ... for high density, low VSWR, 75 coaxial applications (microwave, sub-carrier telephone systems, etc.). Trompeter's J12 jack/ PL11C plug combination has a VSWR of 1:04:1 in the 60-80 MHz range. Miniature 50 Coax Patch Panels... for high density 50 patching. 19" panels tapped .312-32-2A to accept J8 and J8D jacks. .50" center-to-center vertical and horizontal hole spacing (unless otherwise noted), insulated and non-insulated panels have stiffener bars. Note: For Front Loading Modular Panels, see page 12. "D" mounting hole specifications, see page 54. Many other panel configurations are available, contact customer service. PATCHING PRODUCTS Fig PATCHING PRODUCTS Patching Products / Standard 19" Panels D Hole Specifications # of Holes Panel Height Hole Spacing Foot Note A B C 12 1.75" - 1.43" 1.43" 16 1.75" - 1.00" 1.00" Fig Non-insulated Part # Insulated Part # 1 A JS-12 JSI-12 1 A JS-16 JSI-16 20 1.75" - .830" .830" 1 A JS-20 JSI-20 24 1.75" - .625" .750" 1 A JS-24S JSI-24S 26 1.75" - .625" .625" 1 A JS-26 JSI-26 Insulated Phenolic Part # 28 1.75" - .625" .625" 1 A JS-28 JSI-28 32 1.75" .625" 1.00" 1.00" 2 B JS-32S JSI-32S JSIB-32S 40 1.75" .625" .830" .830" 2 B JS-40S JSI-40S JSIB-40S 48 1.75" .625" .625" .750" 2 B JS-48S JSI-48S JSIB-48S 52 1.75" .625" .625" .625" 2 B JS-52S JSI-52S JSIB-52S 24 3.50" .625 1.43" 1.43" 2 C JS-24L JSI-24L 24 3.50" 1.00" 1.43" 1.43" 1 C JS-24W JSI-24W 28 3.50" .625" 1.21" 1.21" 2 C JS-28A JSI-28A 28 3.50" 1.00" 1.21" 1.21" C JS-28W JSI-28W 32 3.50" .625" 1.00" 1.00" 2 C JS-32A JSI-32A 36 3.50 .625" .625" .750" 2 I JS-36 JSI-36 JSIB-32A 36 3.50" .625" .830" .830" 2 C JS-36A JSI-36A 40 3.50" .625" .830" .830" 2 C JS-40 JSI-40 JSIB-40 40 3.50" 1.00" .830" .830" 1 C JS-40W JSI-40W JSIB-40W 48 3.50" .625" .625" .750" 2 C JS-48 JSI-48 JSIB-48 48 3.50" .625" .625" .625" 2 C JS-48A JSI-48A JSIB-48A 52 3.50" 1.00" .625" .625" C JS-52W JSI-52W JSIB-52W 52 3.50" .625" .625" .625" 2 C JS-52 JSI-52 JSIB-52 56 3.50" .625" .625" .625" 2 C JS-56 JSI-56 JSIB-56 72 3.50" .625" .680" .680" 3 D JSS-72 JSIS-72 1 Will not accept dual jacks (e.g. J14, J214, J314, J74, HDVDP) 2 Will not accept jacks requiring hole spacing (A) larger than .625" 3 Will accept 3 barrel jack only Note: JSIB (Fig. B and C) panels have .459 dia typ. See page 59 for panel figure diagrams. "D" Holes Double "D" Holes "D" Hole Specifications Throughout the catalog you will find "D" holes called out for bulkhead jacks. The "D" hole is the cutout pattern designated for the proper fit of bulkhead jacks into distribution panels. A A B B "D" Hole Type Maximum panel thickness Example: D3.148 Circular Hole "D" Hole Type A B A 54 B D1 .755" .343" DD1 .630" .532" D2 .630" .281" DD2 .380" .312" D3 .505" .218" DD3 .505" .443" D4 .439" .187" DD4 .630" .562" D5 .380" .156" DD5 .475" .436" D6 .317" .128" DD6 .755" .690" D7 .281" .125" DD7 1.140" 1.060" D8 .605" .280" DD8 .330" .274" D9 .567" .257" D10 .192" .079" D11 1.005" .470" Many other panel hole configurations available, contact customer service. Double Circular Hole A Double "D" Hole C1 .317"-321" CC1 C2 .380"-.385" A .630" C3 .442"-.447" B .370" C4 .474"-.480" C .136"-.140" C5 .505"-.510" C6 .755"-.760" Circular Holes A A B C Patching Products / Custom Cable Assemblies 55 Custom Cable Assembly Lines Trompeter's coax patch cords and cable assemblies are of the highest quality and can be ordered in any length. Trompeter normally stocks popular lengths of 6", 12", 18", 24", 36", 48", 60", and 72". Standard coax patch cords and cable assemblies are made with the following cables: Patch Cords and Cable Assemblies are available in 50 RCA Standard or 75 Western Electric (WECo) Standard. The two standards are not intermateable. Trompeter stocks many other connector types for quick turnaround of custom cable assemblies including: D-Subs & Backshells: Male & Female 9, 15, 25, 37 pin and more SMA/SMB/SMCs: Straight and Right Angles for RG-58, RG-142, RG-174, RG-188, RG-316, and RG-400 Impedance Cable Type Trompeter Cabl Part # 50 RG-58 TCC-50-2 75 RG-59 TCC-75-2 93 RG-62 N/A Patch Cords (see p/n below) Patch Plug to Patch Plug Cable Assembly BNC Plug to BNC Plug 50 RCA Plug Center Pin .070"......... PC-L-Z 75 WE Center Pin .090".............. PCW-L-Z 75 Mini-WECo......................... PCMW-L-Z Tool Crimp BNC 50.............................................. PCYC-L-Z 75............................................ UPCYC-L-Z "L" LENGTH "L" LENGTH Cable Assembly Patch Plug to Push-on Plug Cable Assembly BNC Plug to BNC Plug Wrench Crimp 50 RCA Plug Center Pin .070" to 50 Push-on............... PCPX-L-Z 50 BNC......................................... PCY-L-Z 50 RCA Plug Center Pin .070" to 75 Push-on............. UPCPX-L-Z 75 BNC...................................... UPCY-L-Z 75 WE Center Pin .090" to 50 Push-on..................... PCPWX-L-Z 75 WE Center Pin .090" to 75 Push-on.................. UPCPWX-L-Z "L" LENGTH "L" LENGTH Cable Assembly Patch Plug to BNC Plug 50 RCA Plug Center Pin .070" to 50 BNC....................... PCX-L-Z 50 RCA Plug Center Pin .070" to 75 BNC..................... UPCX-L-Z 75 We Center Pin .090" to 50 BNC............................. PCWX-L-Z 75 We Center Pin .090" to 75 BNC........................... UPCWX-L-Z Z = denotes impedance of connecting cable in ohms. L= denotes length in inches. PATCHING PRODUCTS "L" LENGTH PATCHING PRODUCTS Patching Products / Custom Cable Assemblies Custom Cable Assemblies Trompeter has been producing high quality cable assemblies, and currently provides over 500,000 different configurations using a broad range of RF connectors and cable types. We stock a variety of components for camera, RGB, S-Video, Audio, and many other applications. Capabilities Trompeter can provide coax, twinax, and triax cable assemblies using any cable attached connector. This includes panel mount, data bus, multi-pin , D-Subs, SMA connectors, and patching products. Special marking (ID sleeves/tags, hot stamping, colored cable jacket, etc.) is available. Trompeter offers 24-48 hour turnaround on many standard products with full capabilities for sustained volume delivery. Deliveries can be adjusted to meet your specific needs. Quality Assurance... ISO 9001 Registered Trompeter's assemblies are 100% electrically tested for continuity, shorts, and Hi-Pot. Photo: Twinax/Triax connectors on ruggedized dual twinax/triax test cable (fire retardant cables). (VSWR, IR, Insertion / Return Loss test capabilities, SPC data available on request). Request For Quote... Please refer to the following guideline when requesting a quote: 1 2345 Conn 1 / Cable / Conn 2 / Length / Special Requirements 12 UPL220 / 735A / PL11C / 60" / Bend relief on Conn 1 / / // / / // 1 2 3 4 5 6 6 Qty Quantity............................................................................Select quantity Conn1 .............................................. Select connector type from catalog Cable ....................................................... Select cable from pages 74-91 Conn2 ............................................... Select connector type from catalog Length ........................................................................................In inches Write out any special marking, testing, bend relief, packaging, or other requirements. Example Shown:. 60 inch coax cable assembly using AT&T 735A, BNC plug, and Mini-WECo patch plug with bend relief on BNC plug. 56 Patching Products / Coax RFI Caps & Terminations Coax Terminations and RFI (Dust Caps) Trompeter provides termination and RFI cap for all our connectors. Resistors are normally 1/4 watt for subminiature connectors and 1/2 watt for miniature and standard size connectors (1% tolerances for all). Ordering Instructions For Terminations Example: PL75 Termination for TRB jacks with 78 resistance and no chain. Order part number: TNG1-6-78-D3 Part number from list Chain options R-Resistance D Ring option (see below) 57 Chain Options Length Chain Type Chain Numbers N/A No Chain -1 3.0" Brass Chain -4 6.0" Brass Chain -6 10.0" Brass Chain -10 3.0" Jacketed Stainless-steel rope -13 6.0" Jacketed Stainless-steel rope -14 Stainless-steel rope Stainless Steel Rope with Mounting Rings For RFI Caps Example: Patch plug cap for a J74 twinax/triax jack with no chain. Order part number: Part number from list Chain options D Ring option (see below) RFI70-6-D3 We now provide stainless steel rope with "D" rings. To order mounting ring for jacks with the "D" mounting hole numbers listed on the right, add the "D" ring number to the part number. For Example: RFI20-12-D2 D Ring Options Inside Diameter DRing# Inside Diameter DRing# .755" -D1 .281" -D7 .630"-.635" -D2 .610" -D8 .505"-.510" -D3 .567" -D9 .439"-.443" -D4 .380"-.384" -D5 Coax Terminations & RFI Caps Description Terminator RFI (Dust Caps) BNC, Jack (U)TNASP1-(3)-R (Push on) RFI25-(3) BJ20/CJ20 Series BNC, Jack (U)TNAS1-(3)-R (Short) RFI25-(3) BJ20/CJ20 Series BNC, Jack (U)TNA1-(3)-R RFI25-(3) BJ20/CJ20 BNC, Jack (U)TNAP1-(3)-R RFI25-(3) BJ40/CJ40 Series TNC, Jack (U)TNH1-(3)-R RFI45-(3) BJ50/CJ50 Series TPS, Jack TNB1-(3)-R (Push on) RFI55-(3) BJ50FL Series TPS, Jack TNBP1-(3)-R (Push on) RFI55FL-(3) BJ50/BJ350 TPS/TCM, Jack TNBP1-(3)-R (Push on) RFI355-(3) BJ95 N, Jack (U)TNN1-(3)-R RFI95-(3) BJ130 F, Jack TNF1-(3)-R RFI130-(3) J3 RCA, Patch Jack TP-(3)-R RFI20-(3) J3W WECo Patch Jack TPW-(3)-R RFI20-(3) J8 Mini-WECo Coax Patch Jack TPM-(3)-R RFI50-(3) J11 Mini-WECo Patch Jack TPMW-(3)-R RFI150-(3) J94 (90 Series) Patch Jack TNP1-(3)-R RFI94-(3) J94 (90 Series) Patch Jack TPP-(3)-50 (Push-on) RFI94-(3) PL20 Series BNC, Plug (U)TNAF1-(3)-R RFI21-(3) PL50 TPS, Plug PL220 Series BNC, Plug (U)TNAF1-(3)-R RFI21-(3) PL40 Series TNC, Plug (U)TNHF1-(3)-R RFI41-(3) PL95 N, Plug (U)TNNBJ1-(3)-R (Bulkhead Mount) RFI97-(3)/ RFIS97-(3)Safety wire RFI57-(3) Notes: (3) See Chain options. "U: Designates 75 ohm version available. "R" Resistance. If you cannot find the RFI cap or termination, contact customer service. PATCHING PRODUCTS Parts to be capped BJ20/CJ20 Series PATCHING PRODUCTS Patching Products / Adapters Circuitry Schematics Custom Adapters Ordering Format Adapters indexed with a designated number are standard adapters, refer to page 46 for identifications. Adapters index with a "*" are custom adapters and may be ordered using the example below. For adapters not referenced contact customer service. Schematic Conn #1 Conn #2 Ordering Example: Conn #1 BJ20 Bnc Jack Schematic E1 Circuit Code Conn # 2 PL75 TRB Plug ADBJ20 - E1 - PL75 Adapter Circuitry Schematics Concentric Twinax/Triax to Concentric Twinax/Triax 2-Pin Twinax to 2-Pin Twinax Coax 2-Pin Twinax Coax to Concentric Twinax/Triax 2-Pin Twinax to Concentric Twinax/Triax A1 C1 D1 E1 G1 K1 A2 C2 D2 E2 G2 K2 A3 C3 D3 E3 G3 K3 A4 C4 D4 E4 G4 A5 C5 D5 E5 A6 C6 D6 BLUE CENTER COND A7 C7 D7 D8 A8 BLUE CENTER COND 58 Coax to Coax BLUE CENTER COND Patching Products / Adapter Table Coax to Coax 59 Coax to Coax Adapters Adapter Table Notes: Adapters indexed with a number are Standard Adapters. BJ59 CJ50 CJ50FL PL50 PL50FL PL53 BJ20 BJ26 BJ29 CJ20 PL20 PL21 BJ120 PL121 PL122 PL123 BJ40 BJ46 BJ49 CJ40 PL40 PL41 BJ130 BJ139 PL130 PL93 PL94 BJ95 BJ96 J95 PL95 PL195 RCA J3 J12 PL1 PL11 PL1W PL1WC J3W PL2W PL3 50 Ohm Min. BJ350 CJ350 Adapters indexed with "*" are Custom Adapters. TPS - Insulated Bulkhead Mount 75 Ohm Available Female Male TPS TCM BNC U U U U U BJ50 BJ59 BJ59FL CJ50 CJ50FL PL50 PL50FL BJ350 BJ359 CJ350 PL350 PL350S BJ20 BJ26 BJ29 CJ20 PL20 U BJ49 U BJ40 TNC U BJ46 U CJ40 U PL40 U PL122 PUSH-ON U PL123 BJ130 F BJ139 PL93 LVSWR PL94 U BJ95 U BJ96 N U J95 U PL95 J3 RCA PL1 PL11 J3W J3WC WECo J3WE J9W TNC F LVSWR N Mini-WECo WECo TCM F F F M M M F F F F M M F M M M F F F F M M F F M M M F F F M M F F M M M M F M M F F BB BBBB BBB BB III 17 17 17 B B 48 * * * * * * * 42 17 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 51 48 * * * B * B B * * * * I * * * * * * * * 1 14 * 1 * * 14 14 14 14 * * 14 30 30 * 1 14 30 1 * * * * * 7 * * * * 7 * * * * * * * * * 13 27 * 13 * * * * * * * 27 * 13 * 27 27 * * 27 13 * * * * * * * 8 * * * 10 8 * * 5 6 5 6 * * * * * * 24 24 24 * * 56 56 4 50 45 49 * 57 * 56 52 4 50 45 49 57 * F B * * * * * 16 * * * F * * * * * * 13 27 * 13 * 11 * 2 16 * 2 * * * * * * 62 46 47 63 F B I 27 27 27 * * * 16 16 16 16 * * * F 13 27 13 * 11 2 16 2 * * 62 46 47 63 M * * * * * * * * * * * * * * * * * * * * M B 7 7 * * * 11 11 * * 4 M * * * * * * * * * * * * * * * * * * * * * F * * * 10 * * * * * * 9 43 * * * * 61 F B * * * * * * 43 43 M * * * M * * * F B * 5 5 * * * * * 20 20 * F B I 6 6 * * * * * * * F * * * * * * * * * * 4 * * * * * * * * 20 * * M * * * * * * * * * * * * * * * * F * 56 56 62 62 60 64 M 4 4 46 46 M 50 50 F 57 57 63 63 61 65 * F 57 57 63 63 61 65 F 57 57 63 63 61 65 F F B M M 51 52 * 45 45 47 47 * * * * * * * * * * * * F 6658 58 M 48 49 49 For adapters not listed, call customer service. "D" mounting holes are on page 54. PATCHING PRODUCTS J12 PL2W PL1W J8D 50 Ohm Min. PL3C MiniWECo F F F F F M M F F F M M F F F F M PUSH-ON U U U U U U U U U U U U U U U U U U U U I B U F M BNC Coax/Twinax/Triax Coax/Twinax/Triax Adapters TPS I B U F M - TRS TTM TRB TRT TWBNC TWTNC TRC/ TRN PATCH 60 Insulated Bulkhead Mount 75 Ohm Available Female Male BNC PUSH ON TNC N TRS TTM TRB TRC/TRN F BJ50 M PL50 F BJ350 TCM F U BJ20 F U BJ26 F U BJ29 F U CJ20 M U PL20 M U PL21 M U PL122 M U PL123 F U BJ40 F U BJ49 F U CJ40 M U PL40 M U PL41 F U BJ46 F U BJ95 F U BJ96 F U J95 M U PL95 F BJ157 F BJ157FL F BJ159 F BJ159FL F CJ150 F CJ150FL M PL155 F BJ3157 F BJ3159 F CJ3150 M PL3155 F BJ74 F BJ74FL F BJ74TL F CJ80 F CJ380 M PL80 M PL380 PATCHING PRODUCTS Patching Products / Adapter Table B BBBB B BB BBB IIII BJ154 F B I * * * * * * * * * * BJ154FL F B I * * * * * * * * * * BJ157 F 32 2232 BJ157FL F59 2359 BJ159 F B * * * * * * * * * * 22 22 22 BJ159FL F B * * * * * * * * * * 23 23 CJ150 F * * * * * * * * * * 32 22 32 CJ150FL F * * * * * * * * * * 59 59 PL150 M * * * * * * * * 23 PL153 M * * * * * * * * * * PL155 M * * * * * * * * * * PL155FL M * * * * * * * * * * BJ3154 F B I * * * * * * * * * * 68 68 68 BJ3159 F B * * * * * * * * * * 31 31 31 CJ3150 F * * * * * * * * * * 33 31 33 PL3155 M * * * * * * * * * * * BJ74 F B I * * * * * * * * * * 18 BJ74TL F B I * * * * * * * * * * BJ74FL F B I * * * * * * * * * * BJ77 F * * * * * * * * * * * * * * * * * * * * * 18 BJ77TL F * * * * * * * * * * * * * * * * * * * * * BJ77FL F * * * * * * * * * * * * * * * * * * * * * BJ79 F B * * * * * * * * * * * * * * BJ79TL F B * * * * * * * * * * * 18 BJ79FL F B * * * * * * * * * * * BJ79TLRG F B * * * CJ70 F * * * 18 CJ70TL F * * * CJ70FL F * * * PL71 M * * * * * * PL73 M * * * * * * * * * * * * * PL74 M * * * * * * * * * * * * * * * * * PL75 M * * * * * * * * * * * * * * * * * * * PL75FL M * * * * * * * * * * * * * * * * * PL375 M * * * * * * * * * * * * * * * * * * BJ374 F B I * * * * * * * * * * BJ377 F * * * * * * * * * * * * * * * * * * * * * * BJ379 F B * * * * * * * * * * * BJ379RG F B * CJ370 F * * * * BJ30 F * * * * BJ39 F B * CJ30 F * PL30 M * * * * * * * * * * * * BJ330 F * * * * BJ339 F B * PL330 M * * * * * * * * * * * BJ89 F B * * * * * * * BJ89F F B * * * * * * * BJ893 F B * * * * * * BJ893F F B * * * * * * CJ80 F * * * * * * * * CJ380 F * * * * * * * CJ803 F * * * * * * * PL80 M * * * * * * * PL380 M * * * * * * * PL803 M * * * * * * * BJ389 F B * * * * * * * * BJ389F F B * * * * * * J72D F B * J150 F B53 545555 PL150 M * * * * * * * * * * B B I I 39 40 * * * * 39 * 40 * * * * * * 39 * * * * 40 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 19 41 * * * * * * * * * * * * 38 Patching Products / Adapter Table Coax/Twinax/Triax & Indentifications 61 Coax/Twinax/Triax Adapters Continued... TRB - TRS TTM TRB TRT TWBNC TWTNC TRC/ TRN BJ154 BJ154FL BJ157 BJ157FL BJ159 BJ159FL CJ150 CJ150FL PL150 PL153 PL155 PL155FL F F F F F F F F M M M M B B BJ3154 BJ3159 CJ3150 PL3155 BJ74 BJ74TL BJ74FL BJ77 BJ77TL BJ77FL BJ79 BJ79TL BJ79FL BJ79TLRG CJ70 CJ70TL CJ70FL PL71 PL73 PL74 PL75 PL75FL F F F M F B F F F F F F F F F F F M M M M M B B PL375 BJ374 * BJ377 BJ379 BJ379RG CJ370 BJ30 BJ39 CJ30 PL30 BJ330 BJ339 PL330 BJ89 BJ89F BJ893 BJ893F CJ80 CJ380 CJ803 PL80 PL380 PL803 BJ389 BJ389F M F B F F F F F F F M F F M F F F F F F F M M M F F J72D J150 PL150 F B F B M I I B B B B B I TWBNC * * * * * 18 39 * * 34 29 * 28 * 34 * * 34 * * 35 * 36 * 3 * * * * 28 * * I 18 39 40 3 * * * * 29 * 28 * 34 35 36 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 34 3 29 29 * 28 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 25 25 25 25 * * * * * * * * * 25 12 26 12 * * 25 26 26 26 * * * * * * * * * * * * * * * * * * * * 25 12 26 12 B * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * B * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * B B B B TWTNC B BB BB I * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * I 18 * I * * I * 40 3 B B B B B B TRT * * * * * * * B B 67 67 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 37 37 * * * * * * * * * * * * * 15 * * * 15 15 15 * * * 15 * * * * * * * * * * 37 * * * * * * * * * * * * * * * * * 37 Adapters indexed with a designated number are standard adapters, use the table below to determine the part number. Adapters indexed with a "*" are custom adapters, see page 59. Standard Adapters Identification numbers: ID# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Part Number (U)AD28 (U)AD48 AD78 (Note 2) AD1 (U)AD95 (U)ADI95 ADI22 AD130 AD131 AD133 (U)AD142 AD378 (U)AD2848 (U)BJ28 BJ38 (Note 3) (U)BJ48 BJ58 BJ73 (Note 2) BJ88 (U)BJ98 BJ158 (Note 4) BJ158FL (Note 5) BJ358 BJ373 BJ378 (Note 1) AD78FL AD78TL BJ24 BJ3158 (Note 6) AD158 AD3158 BJ78 BJ78TL BJ78FL BJ338 BJ388 (Note 7) BJ73TL BJ73FL ID# 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 Part Number BJ883 BJ58FL BJ138 AD192 AD1W ADH1 ADH1W ADM1 (Note 8) ADM2 (Note 8) ADMW12 (Note 9) J11 (Note 9) J11B (Note 9) J152 (Note 11) J152FL (Note 12) J3152 (Note 13) J3 J3W (Note 10) AD158FL J3F J3WF J5 J5W (U)J9 (U)J9W J8 J72 BJ3153 (U) = 75 ohm version available (Note) = See below Standard Adapter notes: Note: Bulkhead Mounted BNC Side (U)BJ4828 Bulkhead Mounted TNC Side (U)BJ2848 2 Polarization Table (Callcustomer service) 3 Insulated Version BJ33 4 Insulated Version BJ153 5 Insulated Version BJ153FL 7 Insulated Version BJ383 8 50 Ohm Version Only 9 75 Ohm Version Only J308 50 Ohm TCM Jack Threaded 10 Panel Mount J8D J311 75 Ohm TCM Jack to J8D 11 Threaded Panel Mount J152 12 Threaded Panel Mount J152FLFT 13 Threaded Panel Mount J3152FT 1 PATCHING PRODUCTS PATCH Insulated Bulkhead Mount 75 Ohm Available Female Male F BJ77 F BJ77FL F BJ77TL F BJ79 F CJ70 F CJ70FL F CJ70TL M PL74 M PL75 M PL75FL F BJ374 F BJ377 F BJ379 F CJ370 M PL375 F BJ30 F BJ39 F CJ30 M PL30 F BJ330 F BJ339 F CJ330 M PL330 I B U F M TOOLS & ACCESSORIES Tools & Accessories Cable Strippers Powered Cable Stripper This powerful, low-cost, portable hand-held (less than 2.25 lbs) cable stripper delivers, production quality performance, and gives you up to 250 strips per charge (7.2 V Ni-cad battery without memory effect). The replaceable, 3-level cutter head, is preset to strip your coax cable for Trompeter's 220 Series, Tool Crimp BNC connectors. The cutter head has adjustable depth cutter blades for precision tuning. Precision ground, tool steel blades (hardens to Rockwell 64) give you up to 15,000 strips! Rapid Charger/ Reconditioner recharges your Ni-Cad in only 1.5 hours! Fast charge: 1.5 hrs/Recondition in 3.1 hrs. Cutter Head Guide Cable Outside Diameter 2-Blade Cut 3-Blade Cut D-Ring# .070-.110 C24T2A C24T3A -D7 .160-.215 C24T2B C24T3B -D8 .190-.230 C24T2C C24T3C -D9 .235-.270 C24T2D C24T3D -DD8 .300-.430 C24T2E C24T3E .110-.160 C24T2I C24T3I .271-.305 C24T2U C24T3U Important Note: The 3-level cutter heads included in the kits are set to the same stripping dimensions as our STC-F (see below) stripping cassette for Trompeter "Tool Crimp" BNC cable connectors. Use 2-level cutter heads for Trompeter "Wrench Crimp" BNC cable connectors. Additional Accessories Extra Cutter heads See guide above DC Driver Battery: Requires cutter head from above BCS Powered Cable Stripper Kits (1-year Warranty) Includes: 1 Driver, 1 Ni-Cad Battery Pack, 1 Cutter Head, 1 Rapid Charger/Reconditioner Station, and 1 Carrying Case. Cable Type Stripper/Cutter head For RG-59 BCS/C24T3D For 8281 BCS/C24T3U Manual Cable Stripping Tools AC Driver and AC Base Unit: Requires cutter head from above ACS Rapid Charger/Reconditioner BRCC Ni-Cad Battery Pack ABP-NSA AC Power Converter ACC-NSA Manual Cable Stripping Tool Tool (only) - Requires blade cassette listed ST1 Cassette (For Tool Crimp BNC Connectors) STC-F Cassette (For Wrench Crimp BNC Connectors) STC-W 3.525 Cable Cutting Tool 1.3 1.175 TROMPETER ELECTRONICS INC. Designed to cut Coax cable without compressing dielectric or damaging center conductor. Cutting Tool 700-0024 1.405 STC-W GRAY .625 .156 .330 STC-F LT GREEN 62 .625 .108 Tools & Accessories 63 Crimp Tools Crimp Tool Die not included, for crimp dies see below Frame CT 5 .50 .236 D Crimp C Crimp 8-Point Crimp Tool BNC/Pl11 Patch Plugs (Red/Blue)................................... 010-0097 BNC Jack and plug (Blue)............................................... 010-0088 CD3-1 .175 DIA 2PL 75 Center Contact Pin (Handle Color) 1.260 B Closure 12-Point Crimp Tool A Closure 75 Center Contact Pin (Handle color) BNC/TNC/Pl11 Patch Plug .697 Max (Green/yellow).............................................................. 010-0098 For crimp dies not listed or for special embossing, call customer service. Outer Sleeve A Embosses B Embosses CD3-1 .213 1A .178 1B CD3-19 .178 178 .255 255 Outer Sleeve A Embosses B Embosses CD3-1 .213 1A .178 1B CD3-2 .324 2A .255 2B CD3-3 .344 3A .290 3B CD3-5 - - .197 5B CD3-19 - - CD3-21 .290 290 .255 255 CD3-22 .404 404 .068 - For crimp dies not listed, call customer service. .344 HEX CRIMP CD5-8 CD5-8 .263 SHEILD CRIMP Twinax/Triax Crimp Tool For Bushing/Shield Crimp Tool Only....................................................... M22520/5-01 Crimp Tool with Die..................................... M22520/5-01/CD5-# CD5-8 SHOWN (1.000) .527 For Standard and Miniature Twinax/Triax patching: 70 Series: TRB/TRT, 150 Series: TRS/TTM, 450 Series: 2-lug/3-lug/threaded connectors. Cable Type Cable Group # Bushing/Shield Crimp Die Center Contact Crimp Tool Part # Center Contact Positioner Part # 70C Twinax 201-225 CD5-8 M22520/1-01 PLR70C PLR155AC Triax 301-309 CD5-10 010-0044 Pin (TP837) 010-0045 Socket (TP838) Small Body 150AC Twinax 201-206, 208, 209, 217-223 CD5-9 M22520/2-01 010-0041 Triax 301-304, 309 CD5-11 Twinax 207, 210, 211-216, 224-225 CD5-8 M22520/2-01 010-0043 Triax 305-306, 308 CD5-13 Triax 307 CD5-10 M22520/1-01 010-0044 Pin (TP837) 010-0045 Socket (TP838) Large Body 150AC PL75MC Twinax 201-225 CD5-14 M22520/2-01 010-0096 226 CD5-15 M22520/2-01 010-0096 450AC Twinax 201-206, 208, 209, 212, 217-223 CD5-9 M22520/2-01 010-0041 PLR450 Twinax 201-206, 208, 209, 212, 217-223 CD5-120 M22520/2-01 010-0041 SPC8P Twinax 201-205, 217, 218, 221, 222 CD5-4 M22520/2-01 Daniels K709 SPC8S Triax 301-303 CD5-7 * Note: Dies imprint either cavity (A/B) or hex size onto crimp sleeve. Custom dies are available for special imprints. TOOLS & ACCESSORIES Connector Series TOOLS & ACCESSORIES Tools & Accessories Cable Assembly Testers Twinax/Triax Cable Assembly Tester BNC Coax Tester Coax Cable Assembly Connector Test Set 75 BNC Plug................................................................. 010-0133 75 MBNC Plug.............................................................. 010-0208 Mini-WECo Adapter (Continuity Only) Twinax/Triax Cable Assembly Connector Test Set 010-0123-1 The Twinax/Triax Cable Assembly Tester is designed to test for opens, shorts, and cross wired connectors. The tester comes complete with terminators and testing instructions. This tool is designed to provide quick verification of TRB cable assemblies in the palm of your hands. The compact hand held unit measures 2 3/4" x 4 1/2" and provides versatility for testing connectors in the field. The unit comes in a soft zipper case which includes a 9v battery and terminators for standard TRB plugs. It can also be used for other connector families with an adapter, or short jumper cable when used with the proper termination. * 3 Conductors which test for opens, shorts, and cross connects * Concentric TRB Interface, which tests both Twinax and Triax * Pass/Open/Short LED indicators * Easy to follow testing instructions * Complete with terminators, carrying case, and a 9V battery 64 Sold Separately 105-1885 Designed to test for the proper assembly of BNC plugs with coax cables. Tests for center contact pin height and continuity (short or open). The new BNC tester is the same size as the twinax/triax tester but exclusively tests only BNC plugs. Mini-WECo continuity test adapter now available (sold separately). * Compact design * Pass/Open/Short LED indicators * One test required for testing remote cable runs * Easy to follow instructions * Complete with terminators, case, and 9V battery * On/Off switch Tools & Accessories 65 Tool Kit & Bulk Packaging Tool Kits Tool Kit Part Number Pin Height Indicator Crimp Tool 8-Point Indentor Crimp Tool 12-Point Indentor BNC/Mini-WECo Electrical Gauge Crimp Die Center Contact Gauge TK4NL-1 UPLCG-1 010-0097 Not Included Not Included CD3-19 Not Included TK4NL-1A UPLCG-1 010-0097 Not Included Not Included CD3-19 Not Included TK4NL-2 UPLCG-1 Not Included 010-0098 Not Included CD3-19 Not Included TK4NL-3 UPLCG-1 010-0097 010-0098 Not Included CD3-19 Not Included TK4NL-4 Not Included 010-0097 Not Included 010-0108 CD3-19 Not Included TK4NL-5 Not Included Not Included 010-0080 010-0108 CD3-19 010-0101 All Tool Kits Include: Case, BCS Cable Stripper with BCS Cutter heads (one C24T3D and one C24T3I), Cable Cutter (part number 700-0024), and Ergonomic Crimp Tool w/long handle CT4L with Crimp Die CD3-19 embosses the die cavity size on the crimp sleeve either .178 or .255. Contact customer service for custom tool kits. LENGTH BNC/TRB Cable Plug Type Length RT1XL straight 22.00" RT1L straight 12.00" RTR-1L right angle 12.00" RTR-1XL right angle 22.00" RT1S straight 6.00" RT1SS straight 3.75" RTC-1L (insulated) straight 12.00" TPS, TCM, TRS, TTM, MBNC Type Length RT4L straight 12.00" RT4S straight 6.00" RTC-4L (insulated) straight 12.00" BNC Coax Assembly Training Video For additional information or for a free demonstration, contact your local Sales Representative log on to our web site at www.EmersonConnectivity.com and locate the rep nearest you. Bulk packaging for UPL220 Series BNC plugs ... Trompeter offers Tool Crimp BNC's bulk packed in convenient vacuum-formed plastic trays. Bulk packaging is perfect for OEM and high-volume, on-site installations. Includes: (50) Body Assemblies (51) Crimp Sleeves (52) Center Contact Pins Assembly Instructions Example: UPL220-026/T50 BNC part number, Vacuum Tray part number For cable groups see pages 78-120. (Not available for cable groups -017) TOOLS & ACCESSORIES Trompeter has produced a video which outlines the major features of our BNC design, describes the tools for reliable installation, and gives step-by-step assembly instructions. The BNC Assembly Video CD is available at no cost to Trompeter Customers. BNC Bulk Packaging APPENDIX Appendix Trompeter Cable Specifications Trompeter cables are manufactured to the listed specifications and offer optimum flexibility, shielding, and performance. Cables with stranded center conductors have greater flexibility and are recommended for short runs at low frequency where constant cable movement might fatigue a single copper-weld center conductor. Trompeter's M17/176-00002 and TWAC-78-1F2 are 200C, Hi-Temp Cables for MIL-STD-1553B data bus applications. Dielectric and fillers made of PTFE (TeflonTM) and outer jackets are PFA (Perfluoroalkoxy). All dimensions are in inches. All values without tolerances are nominal unless otherwise stated. TWCH-78-2 has jacket constructed of flame retardant halogen free polyolefin with temperature range of -30C to +80C. Exploded Detail of Coax, Twinax, & Triax Cable CENTER CONDUCTOR JACKET DIELECTRIC Coax BRAID FILLER OUTER SHIELD INNER CONDUCTORS TWCP = Twinax Plenum Cable TWCH = Twinax Blue Flame Retardant Halogen Free Polyolefin Cable TRCH = Triax Yellow Flame Retardant Halogen Free Polyolefin Cable Cable Designation TCC-50-2 TCC-75-2 RG62 A/U Impedance (Ohms) 502 753 935 Nominal outer dia. 0.195 0.242 0.242 PVC outer Green Violet Black Braid outer dia. 0.150 Max 0.191 Max 0.191 Max Braid AWG#/Mat'l 36/Tinned Cu 34/Bare Cu 34/Bare Cu Dielectric outer dia. 0.116 0.146 0.146 Dielectric mat'l Solid PE Foamed PE PE Conductor outer dia. 0.0355 0.031 0.0253 Conductor strands/Mat'l 19/.0071 Tinned Cu 7/.010 Tinned Cu Solid/CCS Operating temperature range -40C to 90C -40C to 85C -40C to 80C Minimum bend radius 1.00 1.00 Max. Opr. VAC (RMS) 1.4 KV 800 V 750 V Capacitance pf/ft (Max) 30.8 17.3 14.5 17.6 Atten. dB/100 ft: 1 MHz 0.380 0.335 0.250 10 MHz 1.400 1.070 0.900 50 MHz 3.40 2.40 1.90 100 MHz 4.90 3.40 2.80 200 MHz 7.30 4.85 3.70 9.00 5.20 12.00 8.50 400 MHz 1 GHz 28.80 3 GHz Shielded Coverage 30.00 93% For high temperature cables, see chart on the next page. 66 Twinax CENTER CONDUCTOR Coax Cable Specs Cond. Loop Res. (Ohms/M ft.) DIELECTRIC 93% 94.3% Min DIELECTRIC Triax OUTER BRAID JACKET DIELECTRIC INNER BRAID JACKET Appendix 67 Trompeter Cable Specifications Twinax/Triax Cable Specs Twinax Triax High Temperature: Cable Designation TWC-78-1 TWC-78-2 M17/17600002 TWAC-781F2 TWC-1241A TWC-124-2 TRC-50-1 TRC-50-2 TRC-75-1 TRC-75-2 Impedance (Ohms) 783 783 777 777 1244 1244 502 502 755 755 Nominal outer dia. 0.150 0.242 0.129 0.095 0.150 0.245 0.156 0.245 0.189 0.245 Outer braid dia. 0.108 0.195 Max 0.102 0.070 0.105 0.195 Max 0.121 0.210 Max 0.150 0.205 Core outer dia. 0.085 0.154 0.084 0.052 0.085 0.162 Dielectric outer dia. 0.043 0.076 0.042 0.026 0.043 0.080 0.047 0.116 0.073 0.116 Inner braid outer dia. 0.069 Max 0.146 Max 0.093 0.146 Max Inner jacket outer dia. 0.101 0.175 0.130 0.175 Conductor outer dia. .022 0.0370 0.0230 Min. 0.0149 0.0120 0.0220 0.0150 0.0370 0.0120 .0185 Operating temperature Range -40C to 80C -40C to 80C -55C to 200C -55C to 200C -40C to 80C -40C to 80C -40C to 75C -40C to 80C -40C to 80C -40C to 80C Minimum bend radius (in.) 1.50 Max 1.25 1.50 1.25 1.50 1.25 0.75 1.25 1.00 1.25 Max. Opr. VDC 0.6 KV Max 2.0 KV 0.6 KV 2.0 KV 2.0 KV 6.0 KV 2.0 KV 6.0 KV Max Max. Opr. VAC (RMS) 0.3 KV Max 1.0 KV 750 KV Max 250 0.3 KV 1.0 KV 1.0 KV 2.0 KV 1.0 KV 2.0 KV Max Capacitance pf/ft. (Max) 20.30 Max (2) 21.20 (3) 24.00 23.00 12.40 12.30 (3) 29.50 32.00 (1) 20.00 20.50 (1) Cond. loop res.(Ohms/M ft.) 179 Max 19.00 Max 48.00 146.00 570.60 56.80 Max 0.700 1.400 2.000 3.250 0.540 2.800 0.500 0.900 0.480 Atten. dB/100 ft.: 1 MHz 2.000 3 MHz 3.000 1.100 2.100 4.400 0.920 3.100 0.800 1.300 0.880 4 MHz 3.500 1.400 2.400 4.800 1.060 3.300 0.900 1.500 1.010 5 MHz 4.000 1.550 2.800 5.200 1.180 3.400 1.100 1.700 1.100 7 MHz 4.500 1.800 3.500 10 MHz 5.300 2.200 4.50 Max 20 MHz 7.50 3.10 6.500 5.600 1.400 3.700 1.300 1.900 1.300 5.900 1.650 4.100 1.500 2.400 1.500 8.30 2.30 5.50 2.30 3.60 2.30 30 MHz 9.20 3.90 10.20 2.80 7.00 2.90 4.50 2.90 40 MHz 10.60 4.50 11.80 3.20 7.50 3.40 5.40 3.30 50 MHz 11.90 5.10 13.20 3.60 9.10 3.90 6.10 3.60 100 MHz 16.80 7.50 18.70 5.10 14.00 5.80 9.70 5.20 200 MHz 23.70 10.50 26.40 7.20 22.00 8.80 16.50 7.60 500 MHz 37.50 16.00 41.70 11.40 40.00 15.30 28.50 10.80 44.30 18.60 49.40 13.50 50.00 18.00 36.00 14.70 53.00 22.50 59.00 16.20 63.00 23.00 45.00 17.60 Shielded coverage 93% 93% 93.3% 90% Min. 93% 93% 93% Min. 93% 93% Min. 93% Twist per ft. 8.00 4.00 11-14 16.00 8.00 4.00 APPENDIX 700 MHz 1 GHz APPENDIX Appendix Twinax/Triax: Plenum/Halogen Free Cable Specs Twinax Triax Cable Designation TWCP-78-1 TWCP-78-2 TWCH-78-2 TWCP-124-2 TWCP-124-3 TWCP-124-5 TRCH-50-2 Description Plenum Plenum Halogen Free Plenum Plenum Plenum Halogen Free Impedance (Ohms) 783 783 783 1244 1244 1245 502 Nominal outer dia. 0.150 0.242 0.242 0.245 0.205 0.325 0.245 Outer braid dia. 0.102 0.165 0.183 0.295 0.210 0.062 0.134 0.116 0.043 0.146 Core outer dia. Dielectric outer dia. 0.041 0.072 0.195 0.183 0.154 0.163 .076 0.080 Inner braid outer dia. Inner jacket outer dia. 0.175 Conductor outer dia. 0.021 0.037 0.037 0.024 0.024 0.048 0.037 Operating temperature range +125C +125C -30C to +80C +125C -10C to +75C -10C to +125C -30C to +80C Minimum bend radius (in/ft.) 1.50 2.50 1.25 2.5 2.0 3.25 1.25 Max. Opr. VDC 2KV 2500 2500 6 KV Max. Opr. VAC (RMS) 1KV 1KV 1800 1800 2 KV Capacitance pf/ft. (Max) 19.6 (3) 18.6(3) Cond. loop res. (Ohms/M ft.) 21.2(3) 11.5 12.0(3) 11.0(3) 19.0 47.0 28.4 6.5(3) 10.5 Atten. dB/100 ft.: 1 MHz 2.00 .60 0.70 .50 0.60 .30 0.50 3 MHz 3.00 1.00 1.10 .85 0.90 .47 0.80 4 MHz 3.50 1.20 1.40 1.10 .64 0.90 5 MHz 4.00 1.40 1.55 1.10 1.20 .69 1.10 7 MHz 4.50 1.60 1.80 1.30 1.40 .79 1.30 10 MHz 5.30 2.00 2.20 1.60 1.60 .94 1.50 20 MHz 7.50 2.80 3.10 2.30 2.20 1.20 2.30 30 MHz 9.20 3.50 3.90 2.80 1.50 2.90 40 MHz 10.60 4.10 4.50 3.20 1.70 3.40 50 MHz 11.90 4.60 5.10 3.70 3.60 2.00 3.90 100 MHz 16.80 6.90 7.50 5.30 5.20 3.00 5.80 200 MHz 23.70 9.90 10.50 7.20 4.50 8.80 500 MHz 37.50 15.40 16.00 11.40 7.00 15.30 700 MHz 44.30 18.30 18.60 13.50 8.40 18.00 1 GHz 53.00 21.80 22.50 16.20 11.00 23.00 Shielded coverage 97% 95% 93% 93% 93% 93% 93% Twist per ft. 8.0 4.0 4.0 4.0 6.0 6.0 Notes: (1) = Center Conductor to Inner Braid (2) = Conductor to Shield (3) = Conductor to Conductor 68 Appendix 69 Connector Compatibility Tables Twinax/Triax Wrench/Tool Crimp Connectors Twinax/Triax Wrench Crimp Connectors Wrench Crimp Cable Groups Connector 7 7A 8 9 10 11 12 13 13A 14 14A 15 16 17 23 24 24A 25 25A 26 27 28 29 30 32 33 35 38 39 40 42 43 45 46 47 49 54 55 56 57 58 59 60 61 62 64 BR BJ39 N BJ74(FL/TL) Y BJ79(FL/TL) Y BJ89/BJ89F N BJ154(FL) N BJ159(FL) N BJ374 Y Y BJ379 BJ389(F) N BJ893(F) N N BJ3154 N BJ3159 CJ70(FL/TL) Y CJ80 N CJ150(FL) Y CJ370 N CJ380 N N N CJ803 CJ3150 J72S N J72SM N J150 N PL30 Y PL71 PL71L Y PL73 Y PL74 Y PL75(FL) N PL80 N PL101 N PL151 N PL153 N PL155 PL155FL Y PL375 N PL380 N N PL803 PL3155 Select your connector and read across to find available cable group numbers. = Available, = Not Available BR = Column denotes Bend Relief Springs (Wrench Crimp), "Y" = Available, "N" = Not Available APPENDIX APPENDIX Appendix Connector Compatibility Tables Twinax/Triax Wrench/Tool Crimp Connectors Twinax/Triax Wrench Crimp Connectors Wrench Crimp Cable Groups Connector 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 301 302 303 305 306 307 308 309 BJ154AC BJ154ACFL BJ159AC BJ159ACFL CJ150AC(FL) BJ3154AC BJ3159AC CJ3150AC CJ70C(TL)(FL) CJ370C BJ74C(TL)(FL) BJ374C BJ79C(TL)(FL) BJ379C PL73C PL74C PL75C PL75CFL PL153AC PL155AC PL155ACFL PL375C PLR375C PL3155AC PLR74C PLR75CFL PLR75C PLR155AC(FL) PLR3155AC(FL) SPC8P SPC8S BJ459AC/GROUP CJ450AC/GROUP PL455AC/GROUP PLR455AC/GROUP Select your connector and read across to find available cable group numbers. = Available, 70 = Not Available Appendix 71 Trompeter General Material/Finish Specifications TFS-1: Finish Specifications TFS-1A .0001- .0003 max thk Bright Nickel per QQ-N-290, Class1, Form SB (over) .000080-.000150 thk Bright Copper per MIL-C-14550 (over) .0005 max Electroless Nickel per AMS-2404C, Class 1 (On Aluminum Only) TFS-1B .000020 - .000030 thk Bright Gold2 per MIL-G-45204, Type II, Grade C, Class3 (over) .000050-.000180 thk Bright Nickel3 per QQ-N-290, Class1 (over) .000080-.000150 thk Bright Copper3 per MIL-C-14550 TFS-1D .0001min - .000120 max thk Electroless Nickel per AMS 2404C (over) .000080 min - .000150 max thk Bright Copper per MIL-C-14550 TFS-1E .0002 min -.0003 max thk Bright Electro Tin per MIL-T-10727, Type 1 and solder test per Para. 4.6.3.1 TFS-1M4 .000200 min - .000300 max thk Silver per QQ-S-365, Type II (Semi-bright) Grade A (Chromate post treatment) (over) .000080 min - .000150 max thk Bright Copper per MIL-C-14550 TFS-1T5 .000050 -.000100 Bright Tin per MIL-T-10727, Type I (Electro Deposited) (over) .000150-.00020 Sulfamate Nickel per MIL-P-27418 (over) .00010-.00150 Copper per MIL-C-14550, Class 4 TFS-1U5 .00020-.00030 thk Sulfamate Nickel per MIL-P-27418 (over) .000080-.000150 max thk Copper per MIL-C-14550 Trompeter Finish Specification -1 (TFS-1) Notes: (2) Bright Gold plate on all connector center contacts, pins, sockets, shall be .000050 min - .000070 max thk, Class 1 (3) Thickness is in accordance with MIL-G-45204B, Para 6.3 "Strikes and Underplating" (4) Copper Alloy articles on which a nickel undercoat is not used shall not be used for continuous service at temperatures above 149C (300F) QQ-S-365, Para. 3.3.5. (5) For use on Brass and Beryllium Copper body (shell) and accessory components when 500 hour salt spray test is specified. (For test conditions, refer to MIL-C-38999, Para. 3.16 and 4.7.12.2, [Method 1001.1 of MIL-STD-1344]) (6) Plating thickness variations, critical and noncritical areas must be plated to within specified lower limits, except where surfaces cannot be contacted by A .75 inch dia ball, noncritical areas total plating thickness may exceed the specified upper limits by .000150 maximum. Materials Alloy or Type FED/MIL Spec. Usage ABS Moldings Type 2 MIL-STD-1803 L-P-1883B Looping plug handles, lock pins Acetal Dupont Delrin L-P-392 Insulators, cases, bushings Aluminum 2024-T351 QQ-A255/6 Backbars, cases 6061-T6 QQ-A200/8 Stiffener bars 6061-T6 QQ-A250/11 Patch panels 6061-T6511 QQ-A200/8 Backbars, cases 17200 (Bar) ASTM-B-194 Contact & crescent springs 17300 (Flat) ASTM-B-196 &197 Contact sockets, fingersprings, washers C26000 ASTM-B-36 Ground lugs, washers C36000 ASTM-B-16 Connector bodies, coupling sleeves, clamp nuts, hex mtg. nuts, ctr. contact pins, cases Beryllium Copper Brass TFS-1V3 .000200-.000300 max thk Silver per QQ-S-365, Type I (Matte), Grade A (over) .000050-.000180 max thk Sulfamate Nickel per MIL-P-27418, (over) .000080 min-.000150 max thk Bright Copper per MIL-C-14550 Dupont Acetal Resin #500TL Homopolymer General Purpose w/ 1.5% Teflon Micropower Moldings Fluorinated Ethylene Propylene (FEP) Hyflon MFA Grade 640 Loctite 495 (Zinc Iridite per ASTM-B633) QQ-2-325 Type 2 Class 2 Finish Nylon 6/6 or 6/12 L-P-410A Insulating bushings Perfluoroalkoxy (PFA) ASTM-D-3307 Cable jackets Phenolic XXX L-P-513 PBE Patch panels, backbars Phosphor Bronze Alloy 544 ASTM-B-139 Contact springs, lockwashers Polytetrafluoroethylene (PTFE) ASTM-D-1710 Dielectrics, insulators MIL-I-23053/8 Sealing Sleeves Gaskets, O-rings, sealing members ASTM-D-2116 Insulators Alternate material dielectric Polyvinylidene Flouride Rubber Silicone ZZ-R-765 Solder Sn60, 62, 63, or 96 QQ-S-571 Steel C1010-1018 QQ-S-636 MPN cases Music Wire ASTM-A228 SAE J178 Tension springs Steel CRS Type 17-4PH AMS-5643 Tubing Corrosion Resistant Steel 303 QQ-S-763 Connector bodies, coupling sleeves, hex mtg. nuts 302 QQ-S-766 Designation strips 301 ASTM-484, A582 Thermo-plastic Polyester Glass Filled MIL-M-24519 Heat resistant molded insulators Vinyl Clear Rigid-Self ext. ASTM-D-635 Designation strip window Opaque Rigid-Self ext. ASTM-D-635 Designation strip marking strip Alloy #3 ASTM-B-240/B-86 Selected non-functional parts Zinc TFS = Trompeter Finish Specifications Connectors Frequency Range VSWR Voltage Rating TNC 70 Series 150 Series 450 Series WE Standard WE Miniature RCA Standard 0-4 GHz 0-11 GHz 0-500 MHz 0-500 MHz 0-2 MHz 0-1 GHz 0-1 GHz 0-200 MHz 1.04 @ 75 MHz 1.06 Max. 1.05 @ 50 MHz 1.12 @ 100 MHz - 1.09 @ 100 MHz 1.18 @ 500 MHz - 1.33 @ 500 MHz 250 VRMS @ Sea Level 500 VRMS @ Sea Level 1.30 Max. Not Rated 500 VRMS@ Sea Level 500 VRMS @ Sea Level 400 VRMS @ Sea Level 250 VRMS @ Sea Level 150 VRMS @ Sea Level 500 VRMS @ Sea Level 125 VRMS @ 70,000 ft. 125 VRMS @ 70,000 ft. 100 VRMS @ 70,000 ft. 62.5 VRMS @ 70,000 ft. Not Rated Not Rated -65C to 200C -65C to 165C -65C to165C -65C to 165C APPENDIX Temperature Range Patching BNC APPENDIX Appendix BNC Tool/Wrench Crimp Assembly Illustrations BNC Coax Tool Crimp Assembly Illustration 1.132 .632 CONTACT PIN Step 1 1. Place crimp sleeve onto cable with the step located away from the cut end as shown. CRIMP SLEEVE FILLER SLEEVE & BUSHING .593 DIA MAX (USED ONLY ON CONNECTORS -001 THRU -007 & -027) CRIMP SLEEVE 2. Strip cable as shown and flare braid. .250 .344 .156 3. On connectors with cable group number -001 thru -007, and -027 only, slide filler sleeve fully under braid, then bushing under cable dielectric. CABLE STRIPPING 4. Crimp contact pin in position shown. FLARE PIN CONTACT Step 2 1. Push cable assembly into the body until the contact pin snaps into place. CRIMP SLEEVE FILLER SLEEVE (SEE STEP 1, LINE 3) 2. Slide crimp sleeve forward over braid, up against the body assembly and crimp in place. BODY ASSY BNC Coax Wrench Crimp Assembly Illustration Step 1 1. Place clamp nut onto cable. .312 3. Lightly tin center conductor (optional). Step 2 1. Push edge of cone between cable dielectric and braid (or between foil and braid, if foil is present, and cone I.D. will accept it). Continue to push cable into cone until cable dielectric bottoms against cone dielectric. Center conductor should be visible in pin inspection hole. PIN/CONE ASSY BODY ASSY 2. Strip cable as shown and flare braid to allow free entry of cone (Lateral slits 180 apart may be required for very inflexible jacket materials). .158 CABLE STRIPPING 1 CENTER CONDUCTOR CABLE DIELECTRIC FLARE PIN/CONE ASSY 2. Solder center conductor into pin. Step 3 SOLDER 1. Bring clamp nut up onto tapered portion of cable. 2. Assemble body and engage with clamp nut. 3. Wrench tighten to 25-30 inch-pounds torque. Notes: For Illustration purposes only. Not intended to replace actual installation instructions. 72 CLAMP NUT BODY ASSY Appendix 73 Cable Group Table Notes If your cable group is not listed, contact customer service for assistance. Trompeter provides cable connectors with configurations designed to provide tough, durable terminations on specific cables. Cable connector part numbers reference a specific cable group number for a specific cable type, model, and/or manufacturer. This ensures that the connector fits your cable and provides the toughest termination available in the industry. If you know the part number and manufacturer of your cable, you can locate the cable's assigned cable group number using the cable group table in the following pages. If you have a Trompeter connector, you can determine the cable group number by the last hyphenated suffix, (usually 1 to 3 digits). Example: UPL220-026 = cable group number -026 Note: All dimensions in the proceeding Cable Group Table are in thousandths of an inch. If you cannot satisfy your connector requirements with the standard cable group number, or have a special requirement, contact your local Trompeter representative listed on the back inside cover of this catalog, or you can visit our website at www. EmersonConnectivity.com to find the sales rep nearest you. Contact customer service for more information. Note: Cables of the same type and specification may vary from manufacturer to manufacturer. Always verify the cable group number for your connector type and manufacturer. The symbol after the part numbers listed in this catalog indicates that you should refer to the cable group table in the proceeding pages. Wrench style = Wrench Crimp Crimp style = Tool Crimp APPENDIX For a complete listing please refer to the online catalog. APPENDIX 74 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE ALCATEL 0960 WL COAX _ -004 0.093 0.011 75 ALCATEL ASNE 0690 WL COAX _ -004 0.093 0.011 75 ALCATEL CDE 003 TWINAX * -204 0.140 0.024 77 ALPHA 8620 COAX -41 -020 0.270 0.041 75 ALPHA 9059 COAX -2 -013 0.242 0.026 75 ALPHA 9102 COAX * -023 0.212 0.032 75 ALPHA 9108 TWINAX -55 * 0.210 0.038 78 ALPHA 9109 TWINAX _ -213 0.252 0.037 100 ALPHA 9158 COAX -21 * 0.165 0.035 53 ALPHA 9174 COAX -5 -003 0.100 0.021 50 ALPHA 9316 COAX -5 -003 0.098 0.021 50 ALPHA 9807 COAX -51 -016 0.304 0.032 75 ALPHA 9817 TWINAX -8 _ 0.327 0.038 100 ALPHA 9830 COAX -2 -013 0.242 0.025 75 ALPHA 9840 COAX -2 -013 0.240 0.025 80 ALPHA 9847 COAX _ -053 0.405 0.064 75 ALPHA 9850 TRIAX -13 TOO LARGE 0.314 0.032 75 ALPHA 9858 COAX -1 -011 0.193 0.036 50 ALPHA 2834/2 TWINAX -45 _ 0.137 0.032 600V ALPHA 9058C COAX -1 -011 0.194 0.038 50 ALPHA 9179B COAX -5 -004 0.101 0.012 75 ALPHA 9180B COAX -4 * 0.140 0.038 95 ALPHA 9187A COAX -36 -004 0.105 0.010 75 ALPHA 9196A COAX -44 -1 0.070 0.011 50 ALPHA 9804C COAX -41 -020 0.275 0.040 75 ALPHA 9814C TWINAX * -213 0.244 0.038 75 ALPHA 9818C TWINAX -8 _ 0.330 0.037 100 ALPHA 9825C COAX -6A _ 0.400 0.064 75 ALPHA 9861C COAX -1 -011 0.192 0.038 _ ALPHA 9871F COAX * -011 0.182 0.037 50 ALPHA WIRE 2821/2 TWINAX -27 _ 0.138 0.024 600V AMPHENOL 82-5588 TWINAX -8 _ 0.330 00.39 _ AMPHENOL CNDA 21-1060 COAX -6 -016 _ _ _ AT&T (LUCENT) 733 COAX _ -027 _ _ 75 AT&T (LUCENT) 1735A COAX _ -026 0.128 0.016 75 AT&T (LUCENT) 2735A COAX -22 -026 0.140 0.015 75 AT&T (LUCENT) 734D COAX -63 -025 0.236 0.031 75 AT&T (LUCENT) 735A COAX * -026 0.125 0.016 75 AT&T (LUCENT) NSI 4609 805 13019 COAX -37 * 0.166 0.016 _ AT&T (LUCENT) 724 COAX -6 -016 0.304 0.033 _ AT&T (LUCENT) 728 COAX -6 -016 0.304 0.033 75 AT&T (LUCENT) 731 COAX -2 -015 0.248 0.023 75 AT&T (LUCENT) 730A COAX -2B -015 0.255 0.025 AT&T (LUCENT) 734A COAX -63 -025 0.236 0.031 75 AT&T (LUCENT) KS-19224L2 COAX -31 * 0.116 0.011 _ AT&T (W.E.CO) 16PEVL TWINAX -12 _ 0.460 0.051 _ AT&T (W.E.CO) 754E TWINAX -10 _ 0.420 0.040 _ AT&T (W.E.CO) 760A TWINAX -11 TOO LARGE 0.308 0.025 _ AT&T (W.E.CO) 761A TWINAX -30 0.215 0.021 _ BELDEN 8208 TWINAX -25 _ 0.257 0.047 300V BELDEN 8212 COAX -2 -014 0.242 0.032 75 BELDEN 8213 COAX -6A -053 0.405 0.064 75 BELDEN 8215 COAX -6E -017 0.332 0.028 75 BELDEN 8216 COAX -5 -003 0.103 0.020 50 Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE BELDEN 8218 COAX -22 -009 0.150 0.017 75 BELDEN 8219 COAX -1 -011 0.195 0.037 52 BELDEN 8221 COAX -2 -013 0.242 0.025 80 BELDEN 8227 TWINAX -8 _ 0.330 0.039 _ BELDEN 8232 TRIAX -13A TOO LARGE 0.312 0.032 75 BELDEN 8233 TRIAX -14 _ 0.475 0.064 75 BELDEN 8237 COAX -6A _ 0.405 0.085 50 BELDEN 8238 COAX -6A _ 0.405 0.048 75 BELDEN 8240 COAX -1 -021 0.195 0.032 51.5 BELDEN 8241 COAX -2 -013 0.242 0.025 75 BELDEN 8259 COAX -1 -011 0.195 0.040 50 BELDEN 8261 COAX -6A _ 0.405 0.049 75 BELDEN 8262 COAX -1 -011 0.192 0.038 50 BELDEN 8263 COAX -2 -013 0.242 0.023 75 BELDEN 8267 COAX -6A _ 0.405 0.086 50 BELDEN 8268 COAX -6B TOO LARGE 0.425 0.089 50 BELDEN 8279 COAX -2A -022 0.220 0.025 75 BELDEN 8281 COAX -6 -016 0.307 0.030 75 BELDEN 8422 TWINAX -9 _ 0.231 0.025 1000V BELDEN 8441 TWP 30 _ 0.210 0.025 300V BELDEN 8450 TWINAX -27 _ 0.121 0.025 200V BELDEN 8451 TWINAX -23 -210 0.140 0.031 300V BELDEN 9011 COAX -6A -053 0.405 0.064 75 BELDEN 9054 COAX -2 -014 0.242 0.032 75 BELDEN 9060 COAX -41 * 0.284 0.040 75 BELDEN 9064 COAX -6A _ 0.400 0.064 75 BELDEN 9066 COAX -41 -020 0.275 0.041 75 BELDEN 9068 COAX -22 -009 0.146 0.016 75 BELDEN 9100 COAX -2 -014 0.237 0.032 75 BELDEN 9104 COAX -2A * 0.243 0.032 75 BELDEN 9108 COAX * -014 0.237 0.032 75 BELDEN 9110 COAX -2 -014 0.242 0.032 75 BELDEN 9112 COAX -2 0.242 0.032 _ BELDEN 9114 COAX -41 -020 0.270 0.040 75 BELDEN 9116 COAX -41 -020 0.278 0.038 75 BELDEN 9141 COAX -6 -016 0.304 0.033 75 BELDEN 9146 COAX 4 _ _ _ _ BELDEN 9165 COAX -2 -013A 0.242 0.030 75 BELDEN 9167 COAX -2 -014 0.243 0.032 75 BELDEN 9168 COAX -41 -020 0.275 0.040 75 BELDEN 9169 COAX -2B -015 0.249 0.025 93 BELDEN 9170 COAX -4 * 0.140 0.022 75 BELDEN 9171 COAX -2 -013A 0.242 0.030 75 BELDEN 9201 COAX -1 -021 0.193 0.033 52 BELDEN 9203 COAX -1 -021 0.195 0.035 50 BELDEN 9204 COAX _ -013 0.241 0.025 75 BELDEN 9207 TWINAX -8 _ 0.330 0.039 100 BELDEN 9209 COAX -63 -019 0.226 0.022 75 BELDEN 9212 COAX -6A _ 0.405 0.048 75 BELDEN 9221 COAX -5 -004 0.102 0.012 75 BELDEN 9222 TRIAX -7 -306 0.239 0.040 50 BELDEN 9223 COAX -1 * 0.195 0.030 50 BELDEN 9228 COAX -2 -013 0.242 0.025 93 BELDEN 9231 COAX -6 -016 0.304 0.032 75 Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX CABLE MANUFACTURER 75 APPENDIX 76 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE BELDEN 9239 COAX -5 -003 0.104 0.019 50 BELDEN 9240 COAX -2 -014 0.241 0.032 75 BELDEN 9243 COAX -2 -014 0.242 0.032 _ BELDEN 9244 COAX -2 -013 0.242 0.025 73 BELDEN 9248 COAX -41 -020 0.270 0.036 75 BELDEN 9250 TWINAX -10 _ 0.420 0.046 95 BELDEN 9251 COAX -6A _ 0.405 0.085 52 BELDEN 9252 COAX * -010 0.160 0.030 50 BELDEN 9254 COAX -22 -009 0.142 0.019 75 BELDEN 9259 COAX -2A -023 0.234 0.030 75 BELDEN 9265 COAX -2 -014 0.242 0.031 75 BELDEN 9266 COAX -2 -013A 0.245 0.031 _ BELDEN 9268 COAX * -018 0.260 0.025 93 BELDEN 9272 TWINAX -9 -213 0.242 0.037 78 BELDEN 9273 COAX -3 -012 0.216 0.035 50 BELDEN 9274 COAX -2 -014 0.242 0.032 75 BELDEN 9275 COAX -2 -14 0.242 0.032 75 BELDEN 9284 COAX -41 -020 0.275 0.040 _ BELDEN 9291 COAX -2 -013 0.242 0.025 80 BELDEN 9292 COAX -6A -053 0.405 0.064 75 BELDEN 9310 COAX * -011 0.194 0.035 50 BELDEN 9311 COAX -1 -011 0.193 0.037 52 BELDEN 9386 COAX -41 -020 0.275 0.040 _ BELDEN 9448 COAX -2 -013 0.242 0.025 _ BELDEN 9463 TWINAX -9 -213 0.240 0.037 78 BELDEN 9555 COAX -2 -013 0.242 0.023 75 BELDEN 9587 COAX -41 -020 0.275 0.040 75 BELDEN 9589 COAX -2 _ 0.242 0.032 _ BELDEN 9659 COAX -2 -013A 0.242 0.030 75 BELDEN 9764 COAX -6A _ 0.405 0.064 75 BELDEN 9815 TWINAX -8 _ 0.330 0.037 100 BELDEN 9841 TWINAX -9 -215 0.256 0.025 120 BELDEN 9850 COAX -6B _ 0.425 0.048 75 BELDEN 9857 COAX -6A _ 0.405 0.025 125 BELDEN 9859 TWINAX * -213 0.243 0.038 78 BELDEN 9860 TWINAX -46 _ 0.440 0.051 124 BELDEN 9861 COAX -6E _ 0.332 0.057 50 BELDEN 9880 COAX -48 _ 0.405 0.086 50 BELDEN 9907 COAX -1 -011 0.185 0.037 50 BELDEN 46899 COAX -1 * 0.199 0.024 75 BELDEN 81553 TWINAX -47 -201 0.129 0.024 77 BELDEN 82120 COAX -34 -024 0.244 0.040 75 BELDEN 82121 COAX -52 -024 0.240 0.040 75 BELDEN 82907 COAX -21 * 0.163 0.036 50 BELDEN 83241 COAX * -011 0.187 0.037 50 BELDEN 83242 COAX -1 -012 0.193 0.039 50 BELDEN 83264 COAX -5 -004 0.100 0.012 75 BELDEN 83265 COAX -5A -001 0.071 0.010 50 BELDEN 83266 COAX -22 -008 0.141 0.012 95 BELDEN 83267 COAX -36 -004 0.110 0.012 75 BELDEN 83269 COAX -5 -003 0.100 0.018 50 BELDEN 83284 COAX -5 -003 0.100 0.021 50 BELDEN 83303 COAX -44 _ 0.075 0.019 600V BELDEN 83310 TWINAX -29 -207 0.120 0.031 Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Tables CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE BELDEN 83317 TWINAX * -223 0.112 0.019 600V BELDEN 83318 TWINAX -29 -204 0.132 0.025 600V BELDEN 83319 TWINAX * -221 0.139 0.032 NC BELDEN 84142 COAX -1 -021 0.195 0.037 50 BELDEN 84303 COAX -21 -011 0.170 0.037 50 BELDEN 86262 COAX -2A -022 0.220 0.025 93 BELDEN 87108 COAX -2A -023 _ _ _ BELDEN 87120 COAX -52 -024 0.256 0.040 75 BELDEN 88281 COAX -41 * 0.270 0.031 75 BELDEN 89108 COAX -2A -023 0.218 0.032 75 BELDEN 89120 COAX -52 * 0.235 0.041 75 BELDEN 89162 COAX -2A -019 _ _ 75 BELDEN 89182 TWINAX -54 0.307 0.031 150 BELDEN 89248 COAX -52 * 0.222 0.040 75 BELDEN 89269 COAX -2A -022 0.222 0.025 93 BELDEN 89272 TWINAX -55 * 0.220 0.039 78 BELDEN 89292 COAX * -052 0.348 0.064 75 BELDEN 89555 COAX -53 -019 0.230 0.023 75 BELDEN 89880 COAX -50 _ 0.375 0.086 50 BELDEN 89907 COAX -21 (20/90) * 0.160 0.037 50 BELDEN 513945 COAX _ -052 0.405 0.064 75 BELDEN 533945 COAX -41 -020 0.266 0.041 75 BELDEN 549945 COAX _ -023 0.232 0.032 75 BELDEN 551945 COAX _ -023 0.232 0.030 75 BELDEN 568937 COAX -36 -027 0.123 0.016 75 BELDEN 573945 COAX -22 -009 0.146 0.018 75 BELDEN 613948 COAX _ -025 0.348 0.064 75 BELDEN 1151A COAX -2 -013A 0.247 0.032 75 BELDEN 1152A COAX -41 * 0.280 0.040 75 BELDEN 1162A TWINAX -8 _ 0.330 0.037 100 BELDEN 1163A COAX -6 -016 _ _ 100 BELDEN 1164B COAX -22 -009 0.145 0.019 75 BELDEN 1167A COAX -22 -009 0.152 0.020 75 BELDEN 1167B COAX -22 -009 0.146 0.019 75 BELDEN 1168A COAX -141 0.141 0.037 _ BELDEN 1223A COAX -41 -020 0.275 0.040 75 BELDEN 1263A COAX * -009 0.160 0.021 75 BELDEN 1406B COAX -22 -009 0.146 0.019 75 BELDEN 1407B COAX -22 -009 0.146 0.019 75 BELDEN 1417B COAX _ -009 0.150 0.018 75 BELDEN 1418B COAX -22 -009 0.150 0.015 75 BELDEN 1426A COAX -2 -014 0.242 0.032 75 BELDEN 1505A COAX -2 -025 0.234 0.032 75 BELDEN 1505F COAX -2 _ 0.242 0.034 75 BELDEN 1520A COAX -5 -004 0.102 0.012 75 BELDEN 1521A COAX _ -004 0.560 0.012 75 BELDEN 1522A COAX -36 -004 0.107 0.012 75 BELDEN 1523A COAX -6A -053 0.400 0.064 75 BELDEN 1525A COAX -6A TOO LARGE 0.404 0.064 75 BELDEN 1530A COAX -41 -020 0.270 0.040 75 BELDEN 1547A COAX -41 -020 0.275 0.040 75 BELDEN 1617A COAX -6B TOO LARGE 0.407 0.064 75 BELDEN 1671A COAX -86 -003 0.087 0.020 50 BELDEN 1671J COAX -31 _ 0.127 0.020 50 Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX CABLE MANUFACTURER 77 APPENDIX 78 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE BELDEN 1672A COAX -86 -004 0.087 0.011 75 BELDEN 1672J COAX -31 -027 0.127 0.011 75 BELDEN 1694A COAX -41 -020 0.282 0.040 75 BELDEN 1696A TWINAX * -215 0.240 0.031 110 BELDEN 1800A TWINAX * -212 0.184 0.024 110 BELDEN 1800B TWINAX * -212 0.180 0.024 110 BELDEN 1800F TWINAX -30 _ 0.216 0.024 110 BELDEN 1807A COAX -5 -004 0.110 0.012 75 BELDEN 1808A COAX -5 -004 0.110 0.012 75 BELDEN 1809A COAX -63 -025 0.234 0.032 75 BELDEN 1829A COAX -41 -020 0.270 0.040 75 BELDEN 1865A COAX -22 -09 0.152 0.020 75 BELDEN 1880A TWINAX * -212 0.184 0.024 _ BELDEN 3092A COAX -51 * 0.298 0.040 75 BELDEN 4-27046-3265 TWINAX * _ 0.200 0.023 _ BELDEN 5339b5 COAX _ -020 0.266 0.040 75 BELDEN 5339Q5 COAX _ -016 0.298 0.040 75 BELDEN 5399B5 COAX _ -020 0.270 0.040 75 BELDEN 5539Y5 COAX _ -022 0.232 0.025 93 BELDEN 6139B8 COAX _ -052 0.348 0.064 75 BELDEN 6339Q8 COAX _ -024 0.248 0.040 75 BELDEN 6439Q8 COAX _ -023 0.230 0.032 75 BELDEN 734D() COAX _ -025 _ _ 75 BELDEN 734D()T COAX _ -025 _ _ 75 BELDEN 734D1 COAX _ -025 0.235 0.032 75 BELDEN 735A() COAX * -026 _ _ 75 BELDEN 735A()T COAX * -026 _ _ 75 BELDEN 735A1 COAX * -026 0.129 0.016 75 BELDEN 7700A COAX -5 -004 0.107 0.012 75 BELDEN 7710A COAX -41 -020 0.275 0.040 75 BELDEN 7713A COAX -41 -020 0.275 0.040 75 BELDEN 7731A COAX -6A -053 0.405 0.064 75 BELDEN 7788A COAX -4 -009 0.159 0.023 75 BELDEN 7794A COAX -023 0.235 0.032 75 BELDEN 7805A COAX -5 -003 0.105 0.018 50 BELDEN 7806A COAX -1 -011 0.195 0.037 50 BELDEN 7807A COAX -1 _ 0.195 0.044 50 BELDEN 8232A TRIAX -13A TOO LARGE 0.315 0.032 75 BELDEN 8233A TRIAX -14 _ 0.475 0.048 75 BELDEN 8241A COAX -2 -013 0.242 0.025 75 BELDEN 8241B COAX -2 -013 0.242 0.023 75 BELDEN 8241F COAX -2 -013A 0.242 0.030 75 BELDEN 8281B COAX -6 -016 0.307 0.030 75 BELDEN 8281F COAX -51 -016 0.300 0.033 75 BELDEN 9062A COAX -2 -013 0.242 0.025 93 BELDEN 9269_ COAX -2 -013 0.242 0.025 93 BELDEN 97300 2802 TWINAX * -050 0.94 0.012 _ BELDEN 9913F COAX * -050 0.408 0.108 50 BELDEN M9100 COAX -2 -014 0.240 0.032 _ BELDEN M9815 TWINAX -8 _ _ _ _ BELDEN PD7163 COAX -004 0.100 0.010 75 BELDEN SS895 COAX -36 -027 0.123 0.016 75 BELDEN YM23969 COAX -34 * 0.244 0.033 _ BELDEN YQ10474 TWINAX -25 _ 0.268 0.032 _ Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE BELDEN YQ28763 TWINAX -55 _ 0.200 _ _ BELDEN YQ40343 COAX -5 -004 0.95 0.012 75 BELDEN YQ41416 TRIAX -10 TOO LARGE 0.410 0.063 75 BELDEN YQ44343 COAX _ -009 0.142 0.019 75 BELDEN YR-14910 TWINAX -29 -202 0.150 0.024 78 BELDEN YR-15161 TWINAX -29 _ _ _ _ BELDEN YR16411 TWINAX -9 _ 0.247 0.023 _ BELDEN YR-19218 TWINAX -29 -203 0.150 0.012 124 BELDEN YR23023 COAX * -009 0.160 0.020 75 BELDEN YR23930 COAX -2 -014 0.242 0.032 75 BELDEN YR27110 COAX -22 -009 0.162 0.021 75 BELDEN YR27543 TWINAX -27 * 0.117 0.012 _ BELDEN YR28296 TWINAX _ -203 0.162 0.012 _ BELDEN YR28314 COAX * -009 0.162 0.019 75 BELDEN YR28365 COAX -2 -013 0.245 0.025 100 BELDEN YR39667 COAX -22 -009 0.152 0.020 75 BELDEN YR40974 COAX -36 -007 0.113 0.012 75 BELDEN YR41007 COAX -63 -025 0.235 0.032 75 BELDEN YR41039 COAX -22 -009 0.155 0.020 75 BELDEN YR41679 COAX _ -014 0.242 0.032 75 BELDEN YR45056 COAX * -026 0.131 0.017 75 BELDEN YR45301 COAX * -026 0.131 0.017 75 BELDEN YR46359 COAX _ -023 0.235 0.034 75 BELDEN YR46400 COAX -2A -014 0.242 0.033 75 BELDEN YR46844 COAX _ -009 0.155 0.020 75 BRAND REX T-14670 TWINAX * -215 0.237 0.030 _ BRAND REX T18-11222-24-2/G-0 TWINAX -27 -223 0.112 0.023 _ BRAND-REX A-779 COAX -5 -004 0.090 0.010 _ BRAND-REX B-749 COAX -44 105-1940 (220) 0.080 0.012 _ BRAND-REX M17/183-00001 COAX -1 -011 0.195 0.035 50 BRAND-REX T- 378 COAX -6 -016 0.312 0.031 _ BRAND-REX T-10971 TWINAX -24 -221 0.161 0.024 _ BRAND-REX T-14018 TRIAX -25A _ 0.250 0.030 _ BRAND-REX T-2948 TRIAX -26 _ 0.165 0.012 _ BRAND-REX T-385 COAX -44 * 0.80 0.012 _ CANFORD PSF 1/3 COAX -2B -015 0.250 0.024 75 COMMSCOPE 5905 COAX -6A -051 0.405 0.048 75 COMMSCOPE 222 COAX -4 -009 0.155 0.024 75 COMMSCOPE 232 COAX -4 -009 0.155 0.024 75 COMMSCOPE 242 COAX -6A 0.415 0.064 75 COMMSCOPE 322 COAX * -009 0.160 0.020 _ COMMSCOPE 332 COAX -4 -009 0.155 0.024 75 COMMSCOPE 356 COAX -6A _ 0.415 0.064 75 COMMSCOPE 357 COAX -024 0.260 0.040 75 COMMSCOPE 358 COAX -41 -020 0.280 0.040 75 COMMSCOPE 401 COAX -22 -009 0.155 0.020 75 COMMSCOPE 2035 COAX * -026 0.127 0.016 75 COMMSCOPE 3104 COAX -1 -011 0.188 0.037 50 COMMSCOPE 3130 COAX -1 -021 0.201 0.032 50 COMMSCOPE 3135 COAX -1 -021 0.199 0.035 50 COMMSCOPE 3136 COAX -1 -011 0.199 0.037 50 COMMSCOPE 3139 COAX -1 -021 0.202 0.031 50 3140 COAX -1 -021 0.195 0.033 50 3141 COAX -41 -020 0.272 0.040 75 Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX COMMSCOPE COMMSCOPE 79 APPENDIX 80 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE COMMSCOPE 3222 COAX * TOO LARGE 0.412 0.106 50 COMMSCOPE 3226 COAX * TOO LARGE 0.412 0.106 50 COMMSCOPE 3246 COAX -6B _ 0.418 0.086 50 COMMSCOPE 3247 COAX -6B _ 0.418 0.086 50 COMMSCOPE 3249 COAX -6B _ 0.413 0.086 50 COMMSCOPE 3250 COAX -48 TOO LARGE 0.413 0.086 50 COMMSCOPE 5060 COAX -6 * 0.308 0.040 75 COMMSCOPE 5061 COAX -41 * 0.264 0.040 75 COMMSCOPE 5065 COAX _ -009 0.160 0.020 92 COMMSCOPE 5535 COAX * -026 0.128 0.017 75 COMMSCOPE 5550 COAX -2 -013 0.242 0.025 75 COMMSCOPE 5551 COAX -2 -015 0.250 0.025 75 COMMSCOPE 5553 COAX -2 -014 0.250 0.032 75 COMMSCOPE 5554 COAX -2 -014 0.250 0.032 75 COMMSCOPE 5555 COAX -2 -015 0.250 0.025 80 COMMSCOPE 5559 COAX -2 -013 0.242 0.025 75 COMMSCOPE 5560 COAX -2 -015 0.250 0.025 73 COMMSCOPE 5563 COAX -2 -013 0.250 0.023 75 COMMSCOPE 5565 COAX -2 -014 0.242 0.032 75 COMMSCOPE 5567 COAX -2 -014 0.250 0.032 75 COMMSCOPE 5569 COAX -2 -014 0.250 0.032 75 COMMSCOPE 5571 COAX -2 -014 0.248 0.032 75 COMMSCOPE 5572 COAX -2 -014 0.248 0.032 75 COMMSCOPE 5573 COAX -2 -014 0.246 0.032 75 COMMSCOPE 5574 COAX -2 -014 0.248 0.032 75 COMMSCOPE 5575 COAX -2 -014 0.246 0.032 75 COMMSCOPE 5585 COAX -2 -014 0.242 0.032 75 COMMSCOPE 5586 COAX -2 -014 0.247 0.032 75 COMMSCOPE 5589 COAX -2A -022 0.235 0.025 75 COMMSCOPE 5700 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5701 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5702 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5714 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5715 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5720 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5721 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5723 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5725 COAX -41 -020 0.276 0.040 75 COMMSCOPE 5727 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5728 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5729 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5730 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5731 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5737 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5738 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5740 COAX -6 * 0.308 0.040 75 COMMSCOPE 5742 COAX -6 * 0.308 0.040 75 COMMSCOPE 5750 COAX -6 * 0.308 0.040 75 COMMSCOPE 5765 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5781 COAX -6 * 0.306 0.040 75 COMMSCOPE 5782 COAX -6 * 0.308 0.040 75 COMMSCOPE 5786 COAX -41 -020 0.280 0.040 75 COMMSCOPE 5787 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5788 COAX -41 -020 0.280 0.40 75 Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE COMMSCOPE 5789 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5790 COAX -41 -020 0.272 0.040 75 COMMSCOPE 5901 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5902 COAX -6A _ 0.415 0.064 75 COMMSCOPE 5903 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5904 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5906 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5908 COAX -6A -051 0.405 0.048 75 COMMSCOPE 5909 COAX -6A -051 0.405 0.048 75 COMMSCOPE 5910 COAX -6A -052 0.395 0.064 75 COMMSCOPE 5912 COAX -6A -052 0.395 0.064 75 COMMSCOPE 5913 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5914 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5914 COAX -6A _ 0.415 0.064 75 COMMSCOPE 5915 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5916 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5917 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5918 COAX -6A _ 0.412 0.064 75 COMMSCOPE 5920 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5920 COAX -6A _ 0.415 0.064 75 COMMSCOPE 5940 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5950 COAX -6A -053 0.415 0.064 75 COMMSCOPE 5950 COAX -6A -053 0.405 0.064 75 COMMSCOPE 5951 COAX -6A _ 0.405 0.064 75 COMMSCOPE 5952 COAX -6A _ 0.415 0.064 75 COMMSCOPE 5953 COAX -6A _ 0.415 0.064 75 COMMSCOPE 6200 COAX -2 -015 0.242 0.025 92 COMMSCOPE 6201 COAX -2 -013 0.242 0.025 93 COMMSCOPE 6205 COAX * -018 0.260 0.025 93 COMMSCOPE 6605 COAX * -018 0.267 0.025 93 COMMSCOPE 6608 COAX -2 -015A 0.249 0.025 93 COMMSCOPE 6609 COAX -2 -015A 0.249 0.025 93 COMMSCOPE 6611 COAX -2 -015A 0.242 0.025 93 COMMSCOPE 6612 COAX -2 -015A 0.242 0.025 93 COMMSCOPE 6615 COAX -2 -015A 0.249 0.025 93 COMMSCOPE 7500 COAX -6 -016 0.304 0.032 75 COMMSCOPE 7501 COAX -6 -016 0.304 0.032 75 COMMSCOPE 7503 COAX -6 -016 0.304 0.032 75 COMMSCOPE 7505 COAX -6 -016 0.305 0.032 75 COMMSCOPE 7506 COAX -6 -016 0.304 0.033 75 COMMSCOPE 7510 COAX -6 -016 0.304 0.031 75 COMMSCOPE 7530 COAX _ -054 0.318 0.051 75 COMMSCOPE 7536 COAX -4 -009 0.150 0.023 75 COMMSCOPE 7537 COAX -4 -009 0.154 0.023 75 COMMSCOPE 7538 COAX -37 -009 0.159 0.022 75 COMMSCOPE 7551 COAX -41 -020 0.272 0.040 75 COMMSCOPE 7573 COAX -2A -022 0.220 0.027 75 COMMSCOPE 7713 COAX -6A _ 0.413 0.086 50 COMMSCOPE 7714 COAX -6B TOO LARGE 0.425 0.089 75 COMMSCOPE 7714 COAX -6B _ 0.432 0.088 50 COMMSCOPE 7715 COAX -6B _ 0.432 0.088 50 COMMSCOPE 7723 COAX -3 -012 0.212 0.036 50 COMMSCOPE 7725 COAX * -023 0.220 0.036 50 COMMSCOPE 7726 COAX -3 -012 0.220 0.036 50 Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX CABLE MANUFACTURER 81 APPENDIX 82 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE COMMSCOPE 7810 TRIAX * TOO LARGE 0.325 0.032 75 COMMSCOPE 9012 TWINAX -9 _ 0.241 0.037 78 COMMSCOPE 57603 COAX -41 -020 0.272 0.040 75 COMMSCOPE 57604 COAX -41 -020 0.272 0.040 75 COMMSCOPE 57605 COAX -41 -020 0.272 0.040 75 COMMSCOPE 72001 COAX -22 -009 0.155 0.020 75 COMMSCOPE 72012 COAX -22 -009 0.155 0.020 75 COMMSCOPE 72312 COAX * -026 0.127 0.016 75 COMMSCOPE 73501 COAX * -026 0.130 0.016 75 COMMSCOPE 73502 COAX * -026 0.130 0.016 75 COMMSCOPE 73503 COAX * -026 0.130 0.016 75 COMMSCOPE 73506 COAX * -026 0.127 0.016 75 COMMSCOPE 73508 COAX * -026 0.127 0.016 75 COMMSCOPE 73509 COAX * -026 0.127 0.016 75 COMMSCOPE 73512 COAX * -026 0.126 0.015 75 COMMSCOPE 75603 COAX _ -009 0.150 0.022 75 COMMSCOPE 75604 COAX _ -009 0.150 0.022 75 COMMSCOPE 556510 COAX -2 -014 0.242 0.032 75 COMMSCOPE 576503 COAX -41 -020 0.272 0.040 75 COMMSCOPE 576504 COAX -41 -020 0.272 0.040 75 COMMSCOPE 576505 COAX -41 -020 0.272 0.040 75 COMMSCOPE 753603 COAX -4 -009 0.150 0.022 75 COMMSCOPE 753604 COAX -4 -009 0.150 0.022 75 COMMSCOPE 753605 COAX -4 -009 0.150 0.022 75 COMMSCOPE 0132K COAX * -024 0.242 0.040 75 COMMSCOPE 0132V COAX * -024 0.242 0.040 75 COMMSCOPE 0219K COAX -1 -012 0.200 0.036 50 COMMSCOPE 0247K COAX -41 -020 0.268 0.040 75 COMMSCOPE 0247V COAX -41 -020 0.268 0.040 75 COMMSCOPE 0359K COAX * -024 0.241 0.041 75 COMMSCOPE 0359K COAX * -024 0.241 0.041 75 COMMSCOPE 2022K COAX -2 -023 0.239 0.032 75 COMMSCOPE 2022V COAX -2 -23 0.239 0.032 75 COMMSCOPE 2068K COAX -63 -025 0.219 0.032 _ COMMSCOPE 2100K COAX -21 * 0.169 0.032 50 COMMSCOPE 2100V COAX -21 * 0.169 0.032 53 COMMSCOPE 2125K COAX -1 -012 0.200 0.036 50 COMMSCOPE 2227K COAX -41 -020 0.264 0.040 75 COMMSCOPE 2227V COAX -41 * 0.264 0.040 75 COMMSCOPE 2229V COAX -41 -020 0.268 0.040 75 COMMSCOPE 2274V COAX * -024 0.241 0.040 75 COMMSCOPE 2275K COAX * -024 0.241 0.040 75 COMMSCOPE 2275V COAX * -024 0.241 0.040 75 COMMSCOPE 2276V COAX * -024 0.241 0.040 75 COMMSCOPE 2278K COAX * -024 0.242 0.040 75 COMMSCOPE 2291K TWINAX -25 _ 0.260 0.039 100 COMMSCOPE 2525K COAX * -016 0.290 0.031 75 COMMSCOPE 2527K COAX -41 * 0.279 0.032 75 COMMSCOPE 425-0256 COAX _ -025 0.240 0.033 75 COMMSCOPE 5060F COAX -6 * 0.308 0.040 75 COMMSCOPE 5060R COAX -6 * 0.308 0.040 75 COMMSCOPE 5550M COAX -2 -013A 0.242 0.030 75 COMMSCOPE 5568M COAX * -025 0.240 0.033 _ COMMSCOPE 5726R COAX -41 -020 0.276 0.041 75 Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE COMMSCOPE 5740F COAX -6 * 0.308 0.038 75 COMMSCOPE 5740H1 COAX -6 * 0.308 0.040 75 COMMSCOPE 5740R COAX -6 * 0.308 0.040 75 COMMSCOPE 5913R COAX -6A _ 0.415 0.064 75 COMMSCOPE 5916R COAX -6A TOO LARGE 0.415 0.064 75 COMMSCOPE 720T1 COAX -22 -009 0.155 0.020 75 COMMSCOPE 720T2 COAX -22 -009 0.155 0.020 75 COMMSCOPE 734C() COAX -63 -025 0.236 0.032 75 COMMSCOPE 734C1H COAX -63 -025 0.236 0.032 75 COMMSCOPE 734C1P COAX -63 * 0.219 0.032 75 COMMSCOPE 734S( ) COAX -63 -025 0.236 0.032 75 COMMSCOPE 734S1H COAX -63 -025 0.236 0.032 75 COMMSCOPE 734ST COAX -63 -025 0.236 0.032 75 COMMSCOPE 734STH COAX -63 -025 0.236 0.032 75 COMMSCOPE 735(#) COAX * -026 0.130 0.016 75 COMMSCOPE 735()H COAX * -026 0.129 0.016 75 COMMSCOPE 735()P COAX * -026 0.127 0.016 75 COMMSCOPE 73501B COAX _ -026 0.137 0.016 75 COMMSCOPE 73501H COAX * -026 0.127 0.016 75 COMMSCOPE 73502H COAX * -026 0.127 0.016 75 COMMSCOPE 735T()H COAX * -026 0.129 0.016 75 COMMSCOPE 735T2 COAX * -026 0.126 0.016 75 COMMSCOPE F1160BV COAX -6A * 0.395 0.064 75 COMMSCOPE F1160BVV COAX -6A * 0.395 0.064 75 COMMSCOPE F11SSEF COAX -6A _ 0.405 0.064 75 COMMSCOPE F11SSVV COAX -6A TOO LARGE 0.395 0.064 _ COMMSCOPE F5967BVM COAX -2 -014 0.240 0.032 75 COMMSCOPE F5967BVV COAX -2 -014 0.240 0.032 75 COMMSCOPE F660BVV COAX -41 -020 0.272 0.040 75 COMMSCOPE F6SSEF COAX -6 * 0.300 0.040 75 COMMSCOPE F6SSVM-APDI-22-APD COAX _ -020 0.281 0.040 75 COMMSCOPE OP73801DB COAX -6 * 0.290 0.040 75 COMMSCOPE VDM230 COAX _ -009 0.171 0.023 75 COMMSCOPE WBC-300(R) COAX -6 * 0.070 0.070 50 COMMSCOPE 5726 COAX -41 -020 0.272 0.040 74 COMPOSITE VIDEO VA-2/2 COAX _ -009 _ _ 75 COMPREHENSIVE VIDEO CVC-59STXF COAX -2 -023 0.236 0.031 75 CONSOLIDATED 4459 COAX -5 -003 0.105 0.019 50 CONSOLIDATED 4462 TRIAX * _ 0.485 0.091 50 DRAKA 0.6/3.7 COAX _ -022 0.237 0.024 75 DRAKA IMAGE720 COAX _ -019 0.232 0.031 75 DRAKA-HELEX 32448A COAX _ -030 _ _ 75 DRAKE IMAGE1000 COAX _ -020 0.268 0.039 75 ESSEX 1000 COAX -6A _ 0.405 0.085 _ ESSEX 21-004 COAX -6A _ 0.405 0.085 _ ESSEX 21-025 COAX -2 _ 0.242 0.025 _ ESSEX 21-204 TRIAX -42 _ 0.285 0.036 _ ESSEX 21-529 TRIAX -14 _ 0.460 0.049 _ ESSEX 21-537 COAX -1 -011 0.195 0.036 _ ESSEX 21-541 COAX -2 -013 0.242 0.025 _ ESSEX 21-583 TRIAX -15 TOO LARGE 0.490 0.085 53 ESSEX 21-597 COAX -22 -009 0.150 0.017 _ ESSEX 21-780 COAX -6B _ 0.420 0.087 _ ESSEX 21-795 COAX -2 _ 0.242 0.023 _ Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX CABLE MANUFACTURER 83 APPENDIX 84 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE ESSEX 421-098 COAX -22 -008 0.145 0.012 _ ESSEX 421-111 COAX -22 -008 0.155 0.012 _ ESSEX 421-176 COAX -1 _ 0.195 0.039 _ ESSEX 621-100 COAX -6A _ 0.405 0.064 _ ESSEX 621-106 TRIAX -7 _ 0.242 0.025 _ ESSEX 621-243 COAX -41 _ 0.270 0.040 _ ESSEX 621-284 COAX -41 _ 0.270 0.040 _ ESSEX 621-715 COAX -1 * 0.195 0.025 _ FILOTEX 63247 TWINAX _ -212 0.179 0.025 _ FILOTEX 96770 TWINAX -47 _ 0.142 0.024 _ FILOTEX 374693 COAX -22 -009 0.149 0.020 _ FILOTEX ET39110ED2 TRIAX -15 TOO LARGE 0.490 0.064 _ FILOTEX L910/39 COAX -22 -009 0.155 0.020 _ FILOTEX L910-42 COAX -22 -009 0.155 0.020 _ FILOTEX SP714 TRIAX -23 _ 0.138 0.012 75 GEPCO 7174 COAX -5 -003 0.101 0.019 50 GEPCO 7537 COAX -4 -009 0.160 0.023 75 GEPCO 7538 COAX -37 -009 0.159 0.023 75 GEPCO LVT61811 TRIAX -15 TOO LARGE 0.516 0.068 75 GEPCO RGB6000 COAX -6 -016 0.304 0.032 75 GEPCO RGB809 COAX -22 -009 0.150 0.021 75 GEPCO RGBS809 COAX -22 -009 0.150 0.021 75 GEPCO RGBSC809 COAX -22 -009 0.150 0.021 75 GEPCO V61859M COAX -2 _ 0.242 0.030 75 GEPCO V618J59 COAX -2 -013 0.242 0.023 75 GEPCO V618M59 COAX -2 -013 0.242 0.023 75 GEPCO VDFM809 COAX -22 -009 0.150 0.021 75 GEPCO VE61859 COAX -2 -013A 0.242 0.030 75 GEPCO VE61859M COAX -2 -013A 0.242 0.030 75 GEPCO VFM809 COAX -22 -009 0.150 0.022 75 GEPCO VP6000 COAX -6 -016 0.304 0.032 75 GEPCO VP618PE/AP COAX -6 -016 0.304 0.032 75 GEPCO VP618PE01 COAX -6 -016 0.304 0.031 75 GEPCO VP618PVC COAX -6 -016 0.304 0.032 75 GEPCO VP618TK COAX -41 * 0.276 0.032 75 GEPCO VPM1000 COAX -2 -013 0.242 0.023 75 GEPCO VPM2000 COAX -2 -014 0.242 0.032 75 GEPCO VPM618 COAX -2A -022 0.220 0.027 75 GEPCO VS102000 COAX -2 -014 0.243 0.032 75 GEPCO VSD2001 COAX -41 -020 0.273 0.040 75 GEPCO VSM618 COAX -22 -009 0.150 0.017 75 GEPCO VT61811 TRIAX -14 TOO LARGE 0.474 0.065 75 GORE 03352/CX TRIAX _ -303 0.150 0.012 _ GORE C06C032 COAX -5A -001 0.075 0.019 _ GORE CXA-8220 TRIAX -60 -305 0.187 0.025 _ GORE CXN-1352B COAX -44 * 0.078 0.016 _ GORE CXN-1362 COAX -36 _ 0.101 0.031 _ GORE CXN-1388 COAX -5 -003 0.110 0.020 _ GORE CXN-1456 COAX -44 _ 0.74 0.019 _ GORE CXN-1722 COAX -86 * 0.086 0.012 _ GORE CXN-1939 COAX -44 * 0.78 0.010 93 GORE CXN-2223 TWINAX -24 _ 0.141 0.025 _ GORE CXN-2268 TWINAX _ -204 0.135 0.025 _ GORE CXN-2363 TWINAX _ -221 0.166 0.025 _ Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE GORE CXN-2702 TWINAX _ -221 0.166 0.025 100 GORE CXN-3101 COAX -5 -004 0.93 0.012 75 GORE CXN-3162 TWINAX * -223 0.112 0.021 100 GORE CXN-3194 TWINAX _ -204 0.138 0.024 80 GORE CXN3268 TRIAX -27 (150) _ 0.100 0.012 50 GORE DXSN-1747 COAX -44 -001 0.080 0.011 _ GORE DXSN-1888 TWINAX _ -203 0.148 0.015 150 GORE DXSN1892 COAX -36 * 0.103 0.018 _ GORE GBL-075-024 TWINAX -29 -204 0.132 0.025 _ GORE GCX-075-26-REV A COAX -36 * 0.099 0.019 _ GORE GSC 03-2236-00 COAX _ -004 0.092 0.012 75 GORE GSC-01-81457-00 TWINAX -27 -209 0.118 0.016 120 GORE GSC-05-80583-00 TWINAX _ -202 0.145 0.021 _ GORE GSC-12-1381-01 TWINAX -45 _ 0.160 0.024 _ GRUMMAN GC875ACH1 TWINAX * -224 0.190 0.024 98 GRUMMAN GC875GBI TRIAX -57 -302 0.164 0.033 _ GRUMMAN GC875GC1 TRIAX -56 -301 0.164 0.012 _ GRUMMAN GC875GP1 COAX -31 -006 0.128 0.020 _ GRUMMAN GC875LNI TWINAX 59 _ 0.167 0.020 _ GRUMMAN GC875PD1 COAX -5A _ 0.063 0.012 _ GRUMMAN GC875RM1 TWINAX -45 -204 0.144 0.025 _ GRUMMAN GC875RR1 QUADRAX -33 -220 0.179 0.025 _ GRUMMAN GC875TM24H TRIAX -58 -221 0.160 0.025 _ GRUMMAN GC875TMH TWINAX -45 -204 0.146 0.025 _ H.P. TXA114-P TRIAX * * 0.217 0.021 _ HEWLETT PACKARD 8120-0049 COAX -4 -008 0.155 0.010 _ HEWLETT PACKARD 8120-0552-1 COAX -5B * 0.110 0.015 50 HEWLETT PACKARD 8120-0789 COAX -5B _ 0.110 0.015 _ HEWLETT PACKARD 8120-1105 COAX -5B -002 0.110 0.015 _ HEWLETT PACKARD 8120-1289 COAX -2B -015 0.255 0.025 _ HEWLETT PACKARD 8120-4461 COAX -5 -003 0.093 0.018 50 HEWLETT PACKARD 8120-9026 COAX -5B _ 0.110 0.015 _ HEWLETT PACKARD A-8120-9077-1 COAX -5 * 0.110 0.015 _ HITACHI HCM-39441/1 COAX * -027 0.128 0.016 75 HITACHI HCM-9441/12 COAX * -026 0.133 0.016 75 HITEMP 117P80660 COAX -50 _ 0.375 0.086 _ HITEMP RD1152 COAX * -026 0.132 0.016 75 HITEMP RD1152-2 COAX -22 * 0.143 0.016 75 JUDD 740 COAX _ -004 0.080 0.010 75 JUDD 735S01 COAX * -026 0.134 0.018 75 JUDD C1401053 COAX -63 -025 0.232 0.031 75 JUDD C1401064 COAX * -026 0.132 0.016 75 JUDD C1401741 COAX _ -004 0.099 0.010 75 JUDD WIRE INC SS502401 COAX -5 -003 _ _ _ KEITHLEY SC-22 TRIAX -23 * 0.145 0.024 40 KEITHLEY SC-9 COAX -1 -021 0.195 0.035 50 LUCENT 407529262 COAX -5 -004 0.106 0.010 75 LUCENT 848068607 COAX -37 * 0.166 0.016 75 LUCENT 106 309 206 (2734A) COAX _ -025 0.225 0.031 75 LUCENT 1928 001A 1C/36 COAX * -026 0.133 0.015 75 LUCENT 735C COAX * -026 0.139 0.016 75 LUCENT KS23918 L2 COAX _ -004 0.089 0.013 75 LUCENT WP91681 L2 COAX _ -004 0.089 0.013 75 M/A-COM 2250-E82832 COAX -53 -022 _ _ _ Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX CABLE MANUFACTURER 85 APPENDIX 86 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE MADISON 022H22BZID TWINAX -9 _ 0.250 0.038 100 MADISON 12CFE00002 COAX _ -009 0.158 0.020 75 MADISON 12EEK00001 COAX _ -026 0.132 0.016 75 MADISON CABLE CORP 6096 COAX -21 * 0.158 0.037 _ MICRODOT 202-3927-0000 TWINAX -27 -208 0.110 0.011 117 MICRODOT 202-3934-0000 TWINAX -24 -211 0.145 0.013 160 MICRODOT 202-3942-0000 TWINAX -27 -209 0.207 0.025 110 MICRODOT 202-4547 TWINAX -24 -211 0.098 0.020 160 MICRODOT 250-3833-0000 TRIAX * -303 0.270 0.030 _ MICRODOT 250-3834-0000 COAX -5A -001 0.400 0.095 50 MICRODOT 250-3902-0000 COAX -5A -001 0.141 0.036 50 MICRODOT 250-3908-0000 COAX -5A -001 0.128 0.012 50 MICRODOT 250-3909-0000 COAX -44 * 0.087 0.021 50 MICRODOT 250-3920-0000 COAX -5A -001 0.087 0.021 50 MICRODOT 250-3967-0000 COAX -5 -003 0.087 0.021 50 MICRODOT 250-4021-0000 COAX -31 * 0.245 0.035 50 MICRODOT 250-4044-0000 TRIAX -43 _ 0.245 0.033 50 MICRODOT 250-4045-0000 TRIAX -43 -302 0.500 0.089 50 MICRODOT 250-4070-0000 TRIAX -56 -302 0.500 0.081 50 MICRODOT 250-4172-0000 COAX * _ 0.500 0.089 50 MICRODOT 250-4180-0000 COAX -5 -003 0.500 0.081 50 MICRODOT 250-4804-0000 TRIAX -32 -203 0.105 0.012 50 MICRODOT 250-4816-0009 TRIAX -27 _ 0.145 0.013 50 MICRODOT 275-3930-000 TRIAX _ _ 0.102 0.021 75 MICRODOT 275-3933-0000 COAX -4 -009 0.120 0.021 75 MICRODOT 275-3991 COAX -36 * 0.200 0.038 75 MICRODOT 293-3902 COAX * -026 0.160 0.031 93 MICRODOT 293-3922-0000 TRIAX -60 -305 0.200 0.039 93 MICRODOT 293-3930-0000 TRIAX -43 _ 0.336 0.057 100 MICRODOT 293-3968-0000 COAX -22 -008 0.412 0.090 93 MICRODOT 295-3801-0000 COAX -22 -008 0.432 0.090 95 MICRODOT 295-3802-0000 COAX -22 * 0.432 0.090 95 MICRODOT 295-3950-0000 TRIAX -43 _ 0.216 0.036 95 MICRODOT 295-3952-0000 TRIAX -43 _ 0.075 0.013 95 MICRODOT 295-3992-000 COAX -36 -007 0.288 0.060 95 MICRODOT 295-3993-0000 TRIAX -64 -303 0.102 0.021 95 MILESTEK 30-01010 COAX -2 -013 0.195 0.013 75 MIL-SPEC 2C2219EXJ TWINAX -47 -206 0.336 0.029 _ MIL-SPEC M17/015-RG022 TWINAX -10 _ 0.475 0.048 95 MIL-SPEC M17/094-RG179 COAX -5 -004 0.105 0.013 75 MIL-SPEC M17/095-RG180 COAX -22 -008 0.145 0.013 95 MIL-SPEC M17/113-RG316 COAX -5 -003 0.098 0.020 50 0.141 0.036 50 * 0.087 0.021 50 MIL-SPEC M17/130-RG402 COAX -141 MIL-SPEC M17/133-00002 COAX -86 MIL-SPEC M17/133-RG405 COAX -86 * 0.087 0.021 50 MIL-SPEC M17/134-00001 TRIAX -7 -306 0.245 0.035 50 MIL-SPEC M17/134-00002 TRIAX -7 -306 0.245 0.033 50 MIL-SPEC M17/135-00001 TRIAX -14A TOO LARGE 0.500 0.089 50 MIL-SPEC M17/135-00003 TRIAX -14A _ 0.500 0.081 50 MIL-SPEC M17/135-00004 TRIAX -14A TOO LARGE 0.500 0.089 50 MIL-SPEC M17/135-00005 TRIAX -14A TOO LARGE 0.500 0.081 50 MIL-SPEC M17/135-00006 TRIAX -14A TOO LARGE 0.500 0.081 50 MIL-SPEC M17/136-00001 COAX -5 -004 0.105 0.012 75 MIL-SPEC M17/137-00001 COAX -22 -008 0.145 0.013 95 Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE MIL-SPEC M17/138-00001 COAX -5 -003 0.102 0.021 50 MIL-SPEC M17/152-00001 COAX -5 -006 0.120 0.021 50 MIL-SPEC M17/155-00001 COAX -1 -011 0.200 0.038 50 MIL-SPEC M17/157-00001 COAX -4 -010 0.160 0.031 50 MIL-SPEC M17/158-00001 COAX -1 -012 0.200 0.039 50 MIL-SPEC M17/162-00001 COAX -6E _ 0.336 0.057 50 MIL-SPEC M17/163-00001 COAX -6A _ 0.412 0.090 50 MIL-SPEC M17/164-00001 COAX -6B _ 0.432 0.090 50 MIL-SPEC M17/164-00002 COAX -6B _ 0.432 0.090 50 MIL-SPEC M17/167-00001 COAX -3 -012 0.216 0.036 50 MIL-SPEC M17/169-00001 COAX -5A -001 0.075 0.013 50 MIL-SPEC M17/170-00001 COAX -21 -011 0.175 0.038 50 MIL-SPEC M17/171-00001 COAX -41 _ 0.288 0.060 50 MIL-SPEC M17/172-00001 COAX -5 -003 0.102 0.021 50 MIL-SPEC M17/173-00001 COAX -5 -003 0.100 0.019 50 MIL-SPEC M17/174-00001 COAX -6A _ 0.400 0.090 50 MIL-SPEC M17/175-00001 COAX -1 -012 0.200 0.039 50 MIL-SPEC M17/176-00002 TWINAX -47 -201 0.134 0.024 77 MIL-SPEC M17/177-00001 TRIAX -60 -305 0.189 0.013 95 MIL-SPEC M17/179-00001 TRIAX * -305 0.195 0.013 75 MIL-SPEC M17/180-00001 COAX -6E -017 0.336 0.029 75 MIL-SPEC M17/181-00001 COAX -6A _ 0.412 0.050 75.E MIL-SPEC M17/184-00001 COAX -2 -013 0.246 0.024 75 MIL-SPEC M17/186-00001 TWINAX -9 *** -213 0.245 0.040 78 MIL-SPEC M17/187-00001 COAX -4 * 0.160 0.031 50 MIL-SPEC M17/189-00001 COAX -6A _ 0.412 0.090 50 MIL-SPEC M17/190-00001 COAX -6B TOO LARGE 0.432 0.089 50 MIL-SPEC M17/196-00001 COAX -5 * 0.115 0.019 50 MIL-SPEC M17/200-00001 COAX -3 -012 0.216 0.036 50 MIL-SPEC M17/29-RG59 COAX -2 -013 0.245 0.023 75 MIL-SPEC M17/2-RG6 COAX -6E -017 0.336 0.029 75 MIL-SPEC M17/30-RG062 COAX -2B -013 0.250 0.025 93 MIL-SPEC M17/31-RG63 COAX -6A _ 0.415 0.026 125 MIL-SPEC M17/45-RG108 TWINAX -9 -213 0.235 0.038 78 MIL-SPEC M17/47-RG114 COAX -6A _ 0.415 0.08 185 MIL-SPEC M17/60-RG142 COAX -1 -012 0.200 0.040 50 MIL-SPEC M17/62-RG144 COAX -6B TOO LARGE 0.412 0.0525 75 MIL-SPEC M17/6-RG11 COAX -6A -053 0.412 0.050 75 MIL-SPEC M17/77-RG216 COAX -6B _ 0.432 0.050 75 MIL-SPEC M17/84-RG223 COAX -3 -012 0.216 0.035 50 MIL-SPEC M17/86-00001 COAX -6B _ 0.440 0.094 50 MIL-SPEC M17/90-RG71 COAX -2B -015A 0.250 0.025 93 MIL-SPEC M17/97-RG210 COAX -2B -013B 0.250 0.026 93 MIL-SPEC M27500-22TE2T14 TWINAX -45 -210 0.137 0.032 _ MIL-SPEC M27500-22TN2N06 TWINAX -29 -201 0.134 0.029 _ MIL-SPEC M27500-24S82T23 TWINAX _ -208 0.101 0.021 78 MONTROSE 9835-735 COAX * -026 0.135 0.015 75 MONTROSE CDT 735A COAX _ -026 0.129 0.016 75 MONTROSE IFX4385 COAX _ -004 0.100 0.013 75 MONTROSE/CDT CBL 1225 TWINAX _ -225 0.200 0.022 124 MONTROSE/CDT CBL 1233 COAX -2A -025 0.225 0.033 75 CBL 1235 COAX -2A -025 0.235 0.031 75 CBL 1288-() COAX _ -026 0.129 0.016 75 MONTROSE/CDT CBL 2108 COAX -2A -025 0.235 0.031 75 APPENDIX MONTROSE/CDT MONTROSE/CDT Note: * = Special contact customer service For a complete listing please refer to the online catalog. 87 APPENDIX 88 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE MONTROSE/CDT CBL 2109 COAX -2A -025 0.241 0.034 75 MONTROSE/CDT CBL 2721 TRIAX -7 -306 0.250 0.037 50 MONTROSE/CDT CBL 2726 COAX * -026 0.133 0.016 75 MONTROSE/CDT CBL 7820 COAX -21 * 0.165 0.035 _ MONTROSE/CDT CBL 9835-735 COAX * -026 0.136 0.014 75 MONTROSE/CDT CBL 9956 TWINAX -56 * 0.170 0.037 78 MONTROSE/CDT CBL3340 COAX _ -004 0.077 0.011 75 NATIONAL WIRE & CABLE S10-9723 TWINAX -55 -214 0.226 0.021 _ NAVAIR 67A37A130 COAX -4 * 0.140 0.031 _ NAVSEA 6322369 TRIAX -60 _ 0.188 0.029 50 NORTHERN TELECOM NT-734 COAX _ -025 _ _ _ NORTHERN TELECOM NT-735 COAX * -026 0.130 0.016 75 PIC WIRE L8620TX TRIAX -60 _ 0.178 0.035 _ PIC WIRE & CABLE L2201TX TRIAX -25A -306 0.250 0.038 50 PIC WIRE & CABLE S33141 COAX -41 _ 0.272 0.067 _ RAYCHEM EPD49311Q COAX -1 -021 0.197 0.035 50 RAYCHEM 10584 TRIAX -24A _ 0.148 0.012 _ RAYCHEM 10586 TRIAX -24A _ 0.148 0.012 _ RAYCHEM 10595 TWINAX * -204 0.133 0.025 _ RAYCHEM 10599 TWINAX -24 -210 0.145 0.031 _ RAYCHEM 10600 TWINAX * -213 0.216 0.032 _ RAYCHEM 10602 TWINAX -45 -204 0.144 0.025 _ RAYCHEM 10606 TWINAX * -223 0.117 0.021 75 RAYCHEM 10612 TWINAX * -204 0.128 0.025 77 RAYCHEM 10613 TWINAX * -222 0.154 0.025 77 RAYCHEM 10614 TWINAX -24 -221 0.161 0.025 77 RAYCHEM 0024A0024 TWINAX -24 -217 0.152 0.025 100 RAYCHEM 0528A0424 TWINAX -47 _ 0.116 0.015 105 RAYCHEM 10598-30-9X TRIAX * -303 0.148 0.012 _ RAYCHEM 10612-24-9 TWINAX * -204 0.132 0.027 77 RAYCHEM 1301-TZD 101 06 UX TWINAX -55 -204 0.217 0.024 _ RAYCHEM 2524A0424 TWINAX * -212 0.172 0.025 125 RAYCHEM 2524E0311-9 TWINAX * -224 0.201 0.025 125 RAYCHEM 2524F0524 TWINAX * -218 0.148 0.025 125 RAYCHEM 2524K0524 TWINAX -55 -224 0.194 0.025 125 RAYCHEM 2526D1114 TWINAX * -219 0.144 0.019 125 RAYCHEM 2526E1114 TWINAX -24 -219 0.147 0.019 125 RAYCHEM 2530A0314 TWINAX -27 -208 0.105 0.012 125 RAYCHEM 2530A1317 COAX -63 _ 0.203 0.013 125 RAYCHEM 44M9996-20-2/6-0 TWINAX -24 * 0.157 0.039 _ RAYCHEM 5012A3311 COAX -50 _ 0.350 0.088 50 RAYCHEM 5012W5812 TRIAX -61 * 0.437 0.089 50 RAYCHEM 5020A1311 COAX -4 * 0.155 0.040 50 RAYCHEM 5020A1811 COAX -21 * 0.165 0.039 50 RAYCHEM 5021D1331 COAX * -021 0.188 0.035 50 RAYCHEM 5021H5331 TRIAX -25A _ 0.258 0.035 50 RAYCHEM 5022D5112 TRIAX -43 _ 0.175 0.032 50 RAYCHEM 5022D5311 TRIAX -43 _ 0.175 0.032 50 RAYCHEM 5022E5111 TRIAX -57 -302 0.164 0.033 50 RAYCHEM 5024A1311 COAX -36 * 0.104 0.025 50 RAYCHEM 5024A1661 TWINAX -27 * 0.108 0.025 50 RAYCHEM 5024A3111 COAX -5 -003 0.113 0.019 50 RAYCHEM 5026A1111 COAX -44 _ 0.080 0.019 50 RAYCHEM 5026A1614 COAX -44 _ 0.080 0.019 50 Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE 5026A1664 TWINAX -49 * 0.085 0.019 50 5026D5314 TRIAX -23 _ 0.132 0.019 50 RAYCHEM 5028A2211-9 COAX -44 _ _ 0.013 50 RAYCHEM 5028A3318 COAX -5B -004 0.090 0.014 50 RAYCHEM 5030A1114 COAX -5A -001 0.061 0.012 50 RAYCHEM 5030A1214 COAX -5A _ 0.061 0.012 50 RAYCHEM 5030A1314 COAX -5A _ 0.063 0.012 50 RAYCHEM 5030A1318 COAX -5A _ 0.063 0.012 _ RAYCHEM 5030A1411 COAX -5A _ 0.066 0.012 50 RAYCHEM 5030A1511 COAX -5A _ 0.066 0.012 50 RAYCHEM 55A1121-24 TWINAX -27 -223 0.107 0.025 _ RAYCHEM 55A1122-26 TWINAX * -223 0.102 0.021 _ RAYCHEM 7028A5518 TRIAX -26 _ 0.143 0.015 70 RAYCHEM 7520A1311 COAX -52 -024 0.241 0.040 75 RAYCHEM 7522A1311 COAX _ -023 _ _ 75 RAYCHEM 7522D5311 TRIAX -25A _ 0.269 0.031 75 RAYCHEM 7523D1331 COAX -2 -013 0.246 0.023 75 RAYCHEM 7524A1311 COAX -21 _ 0.160 0.025 75 RAYCHEM 7524A1312 COAX -22 _ 0.152 0.025 75 RAYCHEM 7524A1811 COAX -37 _ 0.152 0.025 75 RAYCHEM 7524D5811 TRIAX _ -306 0.243 0.025 _ RAYCHEM 7526A5311 TRIAX -60 _ 0.215 0.019 75 RAYCHEM 7526D5318 TWINAX -59 _ 0.167 0.020 75 RAYCHEM 7526J1660 TWINAX -47 _ 0.115 0.019 75 RAYCHEM 7528A1114 COAX -36 -004 0.100 0.015 75 RAYCHEM 7528A1317 COAX -5 -004 0.102 0.015 75 RAYCHEM 7528A5314 TRIAX -64 -303 0.148 0.015 75 RAYCHEM 7528F5614 TRIAX * -303 0.141 0.015 75 RAYCHEM 7528G1312-7 COAX -36 * 0.110 0.015 _ RAYCHEM 7720C8662 TWINAX -213 _ 0.020 77 RAYCHEM 7722C2664 TWINAX -24 -210 0.143 0.032 77 RAYCHEM 7722C3661 TWINAX -24 * 0.178 0.032 77 RAYCHEM 7722C3861 TWINAX * -215 0.232 0.031 77 RAYCHEM 7724C1664-9 TWINAX * -204 0.127 0.023 77 RAYCHEM 7724C3864 TWINAX * -212 0.200 0.024 77 RAYCHEM 7724C8664 TWINAX * -221 0.155 0.025 _ RAYCHEM 7724G3664 TWINAX -45 -222 0.154 0.025 77 RAYCHEM 7724N0664 TWINAX -45 -204 0.144 0.025 78 RAYCHEM 7726D066A TWINAX -27 -223 0.112 0.020 77 RAYCHEM 7824E0422 TWINAX -29 -204 0.135 0.025 78 RAYCHEM 7826D0130 TWINAX -29 -206 0.120 0.025 78 RAYCHEM 9324D0130 TWINAX * 212 0.167 0.025 93 RAYCHEM 9528A1317 COAX * -026 0.137 0.015 95 RAYCHEM 9528A1417 COAX * -026 0.137 0.015 95 RAYCHEM 9528A1517 COAX * -026 0.137 0.015 95 RAYCHEM 9528D5114 TRIAX -60 -305 0.177 0.015 95 RAYCHEM 9530A5117 TRIAX -24A _ 0.149 0.012 _ RAYCHEM 9530D5117 TRIAX -56 -301 0.164 0.013 95 RAYCHEM 9530D5317 TRIAX -59 _ 0.170 0.012 95 RAYCHEM 9530H1118 COAX -36 _ 0.108 0.013 95 RAYCHEM 9532A5114 TRIAX -23 _ 0.140 0.008 95 RAYCHEM 9532A5314 TRIAX -23 _ 0.130 0.008 95 RAYCHEM EPC29116C TRIAX -32 -309 0.152 0.017 _ RAYCHEM EPD 60441 TRIAX -25A TOO LARGE 0.256 0.035 50 Note: * = Special contact customer service For a complete listing please refer to the online catalog. APPENDIX RAYCHEM RAYCHEM 89 APPENDIX 90 Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE RAYCHEM EPD22030E TWINAX * -224 0.209 0.026 _ RAYCHEM EPD22030F TWINAX _ -215 0.251 0.025 _ RAYCHEM EPD22188B TWINAX _ -218 0.150 0.025 _ RAYCHEM EPD26467Q TRIAX -23 -303 0.136 0.012 _ RAYCHEM EPD27364A TWINAX -11 TOO LARGE 0.311 0.038 77 RAYCHEM EPD29102A COAX -2 -013 0.243 0.023 75 RAYCHEM EPD30653Q TWINAX * -217 0.150 0.025 _ RAYCHEM EPD33017Q COAX -5 -003 0.106 0.020 _ RAYCHEM EPD33698Q TRIAX -32 _ 0.142 0.015 _ RAYCHEM EPD33727Q TRIAX -33 _ 0.185 0.012 _ RAYCHEM EPD38474Q TRIAX -13 TOO LARGE 0.330 0.022 _ RAYCHEM EPD44692 TWINAX -29 -217 0.146 0.025 77 RAYCHEM EPD46270Q TRIAX -9 -306 0.260 0.037 _ RAYCHEM EPD49317Q COAX -63 _ 0.228 0.025 75 RAYCHEM EPD49334Q TRIAX -8 TOO LARGE 0.322 0.023 75 RAYCHEM EPD49336Q TRIAX -13A TOO LARGE 0.322 0.023 _ RAYCHEM EPD49338Q TWINAX -9 _ _ _ _ RAYCHEM EPD60947Q TRIAX -7 _ 0.260 0.042 _ RAYCHEM EPD6314 TWINAX -29 -201 0.136 0.025 77 RAYCHEM EPD647100-01 COAX -6B TOO LARGE 0.433 0.088 50 RAYCHEM EPD7246Q COAX -6A TOO LARGE 0.406 0.048 75 RAYCHEM EPD76761 TWINAX _ -212 0.177 0.024 77 RAYCHEM EPD8274-1 TRIAX -13 TOO LARGE 0.314 _ _ RAYCHEM M27500-22ML2TO8 TWINAX -45 -204 0.134 0.028 _ RAYCHEM M27500-22RC2S06 TWINAX * -217 0.145 0.025 _ RAYCHEM M27500-26RC2S06 TWINAX -47 -223 0.110 0.019 _ RAYCHEM M27500-26RC2S09 TWINAX -27 _ 0.110 0.018 _ RAYCHEM URM54 TRIAX -13 _ 0.327 0.023 _ SEIMENS 2YCYCY 0.63/3.7-75 TRIAX -13A TOO LARGE 0.307 0.025 75 SUHNER G 04233 D-10 COAX -2B * 0.256 0.023 75 SUHNER G01330HT TRIAX -56 _ 0.177 0.016 _ SUHNER G02262 COAX -5 -003 0.110 0.019 _ SUHNER G02332 TRIAX -26 _ 0.167 0.035 _ SUHNER G02333 TRIAX -59 _ 0.169 0.010 _ SUHNER G03233D COAX -3 _ 0.212 0.017 _ SUHNER GX03272D-06 COAX -3 -012 0.213 0.035 _ SUHNER S02223 COAX _ -004 0.100 0.04 75 SUHNER S04233 COAX -2B -014 0.243 0.034 75 SUMIRE 4C-HEB-NL COAX _ -25 0.236 0.035 75 SUMITOMO 2.5C COAX -22 -008 0.154 0.015 _ SUMITOMO 2C COAX * -008 0.147 0.012 _ SUPERIOR FVP224 TWINAX -9 -214 0.242 0.021 _ SUPERIOR ESSEX SERIES 11 COAX -6A -052 0.400 0.060 75 TENSOLITE 8712812 TWINAX -47 -201 _ _ _ TENSOLITE 10047-9219-01 TRIAX -32 -302 0.166 0.031 _ TENSOLITE 1936-TX-10C2SW TWINAX -47 -201 0.129 0.024 _ TENSOLITE 24453/42810 Q-2 QUADRAX -58 -217 0.145 0.025 _ TENSOLITE 24499/898X2 TWINAX -24 -204 0.125 0.025 _ TENSOLITE 26433/9P175T-2 TWINAX -27 -205 0.090 0.019 _ TENSOLITE 26840/9D099LV-2 TWINAX * -223 0.110 0.019 _ TENSOLITE 28883/31169Q-1 TRAIX -23 _ 0.135 0.015 75 TENSOLITE 28883/T290TX-1 TRIAX -23 _ 0.135 0.015 75 TENSOLITE 30852/9B2581V-1 28GA COAX -5A -001 0.079 0.010 _ TENSOLITE 30880/4119X-1 COAX -44 * 0.073 0.011 _ Note: * = Special contact customer service For a complete listing please refer to the online catalog. Cable Group Table CABLE MANUFACTURER CABLE NUMBER CABLE TYPE WRENCH STYLE CRIMP STYLE JACKET SIZE CONDUCTOR IMPEDANCE TENSOLITE 30895/25L-1 TRIAX 60 _ _ _ _ TENSOLITE 5M2397-002 TRIAX -23 -303 0.136 0.014 _ TENSOLITE S280W502 TWINAX -24 -218 0.154 0.023 _ TENSOLITE ST5M1284-001 TWINAX * -212 0.180 0.024 96 TENSOLITE STME637-2 TWINAX _ -206 _ _ _ TEXAS INSTRUMENTS 417889-2 TRIAX * -307 0.185 0.012 93 TEXAS INSTRUMENTS 802857-1 TWINAX -24 * 0.162 0.031 70 THERMATICS 11079 TWINAX -29 -204 0.130 0.025 _ THERMATICS 11421 TWINAX _ -223 0.104 0.019 _ THERMATICS 11421 TWINAX _ -223 _ _ _ THERMATICS 425-1680-030VW-1 COAX _ -013 _ _ _ THERMATICS 5M2022-003 TWINAX * -204 0.130 0.024 _ THERMATICS 8712812 (A/F DWG) TWINAX -47 -201 0.125 0.023 _ THERMATICS NEC725-2(G) COAX 53 _ _ _ _ THERMAX 68-1938TF(2)SXE TWINAX _ -223 0.104 0.019 _ THERMAX 77-1936TF(2)TFPA TWINAX -47 -201 0.125 0.024 77 THERMAX 983-495 COAX -4 * 0.144 0.024 75 THERMAX 985-495 COAX -4 * 0.144 0.024 75 THERMAX M27500-22TG2T14 TWINAX -29 _ 0.132 0.031 _ THERMAX RG58/BLACK COAX -1 -011 _ _ 50 THERMAX RGS-316 COAX -5 -003 0.102 0.020 50 THERMAX RGS-316 COAX -5 -003 0.102 0.020 50 TIMES 2382 COAX -6A _ 0.400 0.064 75 TIMES 2391 COAX -41 -020 0.273 0.041 75 TIMES 2560 COAX -41 _ 0.271 0.040 _ TIMES 8712812 TWINAX -47 -201 _ _ _ TIMES 100A COAX -5 -003 0.105 0.018 50 TIMES 2260V COAX -6 * 0.296 0.040 75 TIMES 2360V COAX -41 -020 0.273 0.040 75 TIMES 25B3M COAX -2 -014 0.242 0.031 _ TIMES 65555-RD316 COAX -5 -003 0.113 0.021 _ TIMES AA-2317 TRIAX -24A * 0.169 0.025 50 TIMES AA-2325 TRIAX * -308 0.215 0.020 95 TIMES AA-2511 COAX -2A _ 0.220 0.020 _ TROMPETER TWCH-78-1 TWINAX -29 -202 0.155 0.022 78 TROMPETER TWCH-78-2 TWINAX -9 -213 0.247 0.037 78 TROMPETER TWCN-124-1A TWINAX -29 -203 _ _ _ TROMPETER TWCP-124-2 TWINAX -9 -214 0.250 0.024 124 TROMPETER TWCP-124-3 TWINAX -55 -224 0.215 0.024 124 TROMPETER TWCP-124-5 TWINAX * -226 (70MC) 0.335 0.048 124 TROMPETER TWCP-78-1 TWINAX -47 _ 0.155 0.019 78 TROMPETER TWCP-78-2 TWINAX -9 -213 0.247 0.037 78 APPENDIX Note: * = Special contact customer service For a complete listing please refer to the online catalog. 91 Notes 92 Index Part Number Page Part Number AD1(W)................................................. 47 (U)AD48................................................ 33 (U)AD95................................................ 38 AD131................................................... 39 AD1300................................................. 39 ADAPTERS............................................. 58 ADAPTER TABLE................................ 58-61 AD1WHD............................................... 47 ADH1(W)............................................... 47 ADM1.................................................... 50 ADM2.................................................... 50 (U)AD228.............................................. 27 (U)AD48................................................. 33 AD78 (TL/FL)............................................ 6 (U)AD95................................................ 38 AD158(FL).............................................. 20 (U)ADI95................................................ 38 AD378...................................................... 6 AD3158.................................................. 20 ADMW12............................................... 47 ADRMF70(TL/FL)..................................... 6 ADRMF370.............................................. 6 (U)ADRMF220........................................ 27 APPENDIX......................................... 66-91 BCS/C24T3D.......................................... 62 BCS/C24T3W.......................................... 62 (U)BJ20.................................................. 28 (U)BJ20SL............................................... 28 (U)BJ21.................................................. 28 (U)BJ23.................................................. 28 (U)BJ24.................................................. 28 (U)BJ26.................................................. 28 (U)BJ27.................................................. 28 (U)BJ28.................................................. 28 (U)BJ29.................................................. 28 BJ30....................................................... 25 BJ31....................................................... 25 BJ38 ...................................................... 25 BJ39....................................................... 25 (U)BJ40.................................................. 34 (U)BJ41.................................................. 34 (U)BJ46.................................................. 34 (U)BJ47.................................................. 34 (U)BJ48.................................................. 33 (U)BJ49................................................... 34 BJ50........................................................ 42 BJ57........................................................ 42 BJ58....................................................... 42 BJ59........................................................ 42 BJ72(TL/FL) .............................................. 7 BJ73HS................................................... 16 BJ73(TL/FL)............................................... 7 BJ74(TL/FL)............................................... 7 BJ74C....................................................... 7 BJ74C(TL/FL)............................................. 7 BJ75(TL/FL)............................................... 7 BJ76(TL/FL)............................................... 7 BJ77(TL/FL) .............................................. 7 BJ77HS................................................... 16 BJ78(TL/FL)............................................... 7 BJ78HS................................................... 16 BJ79(TL/FL)............................................... 7 Page Part Number BJ79C(TL/FL)............................................. 7 BJ79HS................................................... 16 BJ80....................................................... 24 BJ88....................................................... 24 BJ89....................................................... 24 BJ89F...................................................... 24 (U)BJ95................................................... 38 (U)BJ98-2............................................... 38 (U)BJ120................................................ 35 (U)BJ120SL............................................. 35 BJ150(FL).................................................19 BJ152(FL).................................................19 BJ153(FL).................................................19 BJ154AC(FL)............................................ 19 BJ157(FL).................................................19 BJ157F(FL)...............................................19 BJ157FLHS...............................................16 BJ157HS.................................................. 16 BJ158(FL)................................................ 19 BJ159..................................................... 18 BJ159AC................................................. 18 BJ159ACFL.............................................. 18 BJ159FL.................................................. 18 (U)BJ220................................................. 27 (U)BJ224................................................. 28 (U)BJ224-RIA.......................................... 28 (U) BJ227................................................ 28 (U)BJ228................................................. 28 BJ249..................................................... 34 BJ3459AC (P/S)....................................... 23 BJ372........................................................ 7 BJ373........................................................ 7 BJ73HS.................................................... 16 BJ374........................................................ 7 BJ374C..................................................... 7 BJ375....................................................... 7 BJ376....................................................... 7 BJ376HS................................................. 16 BJ377........................................................ 7 BJ378....................................................... 7 BJ378HS................................................. 16 BJ379....................................................... 7 BJ379C..................................................... 7 BJ380...................................................... 24 BJ388...................................................... 24 BJ389(F)................................................. 24 BJ450P(P/S)............................................ 22 BJ450R(P/S)............................................ 22 BJ450W(P/S)........................................... 22 BJ450FL(P/S)........................................... 22 BJ457P(P/S)............................................ 22 BJ457R(P/S)............................................ 22 BJ457W(P/S)........................................... 22 BJ457FL(P/S)........................................... 22 BJ459ACFL(P/S)...................................... 23 BJ459ACP (P/S)....................................... 23 BJ459ACR (P/S)....................................... 23 BJ459ACW (P/S)...................................... 23 BJ770(GL)................................................. 7 BJ803..................................................... 24 BJ833..................................................... 24 BJ88....................................................... 24 Page BJ883...................................................... 24 BJ893...................................................... 24 BJ893F..................................................... 24 BJ3150.................................................... 19 BJ3150HS................................................ 16 BJ3150SHS.............................................. 16 BJ3152.................................................... 19 BJ3153.................................................... 19 BJ3154AC............................................... 19 BJ3157................................................... 19 BJ3157F.................................................. 19 BJ3158.................................................... 19 BJ3159................................................... 18 BJ3159AC............................................... 18 BJ3450.................................................... 22 BJ3457.................................................... 22 BJ3459AC(P/S)........................................ 23 (U)BN23................................................. 27 BN73(TL/FL)............................................. 9 BN83...................................................... 24 BN153(FL).............................................. 20 BN373..................................................... 9 BN383.................................................... 24 BN833................................................... 24 BN3153................................................. 20 BNC Coax Connector.............................. 26 BNC Coax Tester..................................... 64 BNC TOOL/WRENCH CRIMP ASSEMBLY ILLUSTRATIONS...................................... 72 CABLE ASSEMBLY TESTER....................... 64 CABLE CUTTING TOOL............................ 62 CABLE DISTRIBUTION PANELS................. 52 CABLE GROUP TABLE.......................... 74-91 CABLE STRIPPERS................................... 62 CBBJ26................................................... 31 (U)CBBJ29.............................................. 31 CBBJ74..................................................... 8 CBBJ79..................................................... 8 CBBJ79 (TL/FL).......................................... 8 CBBJ379................................................... 8 (U)CBBJR26(RC)...................................... 31 (U)CBBJR29(RC)...................................... 31 CBBJR39A............................................... 25 (U)CBBJR46(A)........................................ 34 (U)CBBJR49............................................ 34 CBBJR74................................................... 8 CBBJR74 (TL/FL)....................................... 8 CBBJR79................................................... 8 CBBJR79 (TL/FL)........................................ 8 CBBJR159................................................ 20 CBBJR374................................................. 8 CBBJR379................................................. 8 (U)CBJR20A............................................ 30 (U)CBJR220............................................ 30 CBJ157(FL)............................................. 20 CBJ20..................................................... 30 CBJ22..................................................... 30 CBJ70(TL/FL)............................................. 8 CBJ70A..................................................... 8 CBJ370..................................................... 8 CBJ3157................................................. 20 CBJE130-1, -2, -3.................................... 39 93 INDEX Index Part Number Page Part Number CBJR12.................................................... 31 CBJR157 (FL)........................................... 20 CBJR3157............................................... 20 CBJR70(A)................................................. 8 (U)CJ20................................................... 27 (U)CJ40.................................................. 33 (U)CJ50.................................................. 42 CJ50FL.................................................... 42 CJ70(TL/FL).............................................. 6 CJ70C(TL/FL)........................................... 6 CJ80....................................................... 24 CJ150..................................................... 18 CJ150AC................................................ 18 CJ150ACFL............................................. 18 CJ150FL...................................................18 (U)CJ220................................................. 27 (U)CJ240................................................. 33 CJ350...................................................... 42 CJ370........................................................ 6 CJ370C..................................................... 6 CJ380...................................................... 24 CJ450ACP(P/S)....................................... 23 CJ450ACR(P/S)....................................... 23 CJ450ACW(P/S)...................................... 23 CJ450ACFL(P/S)...................................... 23 CJ803..................................................... 24 CJ3150.................................................... 18 CJ3150AC............................................... 18 CJ3450AC(P/S)....................................... 23 COAX 20/220 SERIES......................... 30-31 COAX PATCH JACKS................................ 45 COAX RFI CAPS & TERMINATIONS........... 57 CONCENTRIC TWINAX 450 SERIES..... 22-23 CONNECTOR COMPATABILITY TABLES... 69-70 CRIMP TOOLS......................................... 63 CT5........................................................ 63 CUSTOM CABLE ASSEMBLIES.................. 56 D HOLES................................................. 54 DIN CONNECTORS............................ 36-37 DISTRIBUTION PANELS........................... 52 F CONNECTORS................................. 39-40 HDVDP/HDVDPM SERIES........................ 43 HDVDPT................................................. 43 HDVDP................................................... 43 HDVDPMT.............................................. 43 HDVDPM................................................ 43 HDVDPMN............................................. 44 HDVDPN................................................ 43 HERMETICALLY SEALED CONNECTORS... 16 HIGH FREQUENCY VIDEO PATCHING...... 44 HP250.................................................... 51 HP304.................................................... 51 HP375.................................................... 51 HP500.................................................... 51 IMPEDANCE MATCHING ADAPTER.......... 59 J3D(WD)................................................. 46 J3E(WE).................................................. 46 J3(W)...................................................... 46 J5(W)...................................................... 46 J8(FL)...................................................... 50 J8D......................................................... 50 J9............................................................ 46 94 Page Part Number J11MW................................................... 48 J11MWL................................................. 48 J11D....................................................... 48 J12.......................................................... 48 J13-R...................................................... 46 J13H-R................................................... 46 J13W-R................................................... 46 J13WH-R................................................ 46 J24WMSTHF-75..................................... 45 J72.......................................................... 11 J72D....................................................... 11 J72L........................................................ 12 J72S........................................................ 11 J74-2T-R.................................................. 13 J74MST-R................................................ 13 J74T-R..................................................... 13 J94.......................................................... 41 (U)J95..................................................... 38 J150........................................................ 14 J152(FL).................................................. 14 J158........................................................ 14 J308........................................................ 50 J74 SERIES............................................... 13 JSISM-120............................................... 12 LOW VSWR CONNECTORS...................... 41 LPH-50................................................... 41 LPLTR-50................................................. 15 LPLTR-75................................................. 15 LPLTRA-50.............................................. 15 LPLTRA-75.............................................. 15 LPLTRAL-50............................................. 15 LPLTRAL-75............................................. 15 LPLTW-124............................................. 15 LPLTW2TP-124....................................... 15 LPLTW2TP-78......................................... 15 LPLTW-78............................................... 15 LPLTWA-124........................................... 15 LPLTWA-78............................................. 15 LPLTWAL-124.......................................... 15 LPLTWAL-78............................................ 15 LPM-50................................................... 50 LPM-75................................................... 50 LPTR-50.................................................. 15 LPTR-75.................................................. 15 LPTRA-50................................................ 15 LPTRA-75................................................ 15 LPTRAL-50.............................................. 15 LPTRAL-75.............................................. 15 LPTRL....................................................... 2 LPTRL-50................................................ 15 LPTRL-75................................................ 15 LPTW-124.............................................. 15 LPTW2TP-78.......................................... 15 LPTW2TP-124........................................ 15 LPTW2TPL-78......................................... 15 LPTW2TPL-124....................................... 15 LPTW-78................................................ 15 LPTWA-124............................................ 15 LPTWA-78.............................................. 15 LPTWAL-124........................................... 15 LPTWAL-78............................................. 15 LPTWL-124............................................. 15 Page LPTWL-78............................................... 15 M22520/5-01......................................... 63 M22520/5-01/CD5#............................... 63 MIL-C-49142 QPL...................................... 5 MINIATURE COAX 20/220 SERIES....... 27-31 MINIATURE COAX 250 SERIES................. 32 MINI WECO COAX CIRCUIT BOARDS JACKS.. 31 MINI-WECO COAX PATCH JACKS............. 48 MINI-WECO COAX PATCH PLUGS............ 47 MINIATURE COAX THREADED 40-240 SERIES................................... 33-34 MINIATURE PATCHING & CABLE ASSEMBLIES....................................... 11,12 MINIATURE NORMAL-THRU PATCH JACKS.......................................... 13 N CONNECTORS..................................... 38 PATCH PLUGS......................................... 49 PATCHING PRODUCTS....................... 45-60 PCHY-L-50.............................................. 41 PCH-L-50................................................ 41 PC-L-Z..................................................... 55 PCM-L-50................................................ 50 PCM-L-75................................................ 50 PCMW-L-Z.............................................. 55 PCMX-L-50............................................. 50 (U)PCPX-L-Z........................................... 55 (U)PCPWX-L-Z........................................ 55 PCW-L-Z................................................. 55 (U)PCWX-L-Z.......................................... 55 (U)PCX-L-Z............................................. 55 (U)PCYC-L-Z............................................ 55 (U)PCY-L-Z.............................................. 55 PHENOLIC PANELS............................ 51-53 PL1C....................................................... 47 PL1MW................................................... 48 PL1MWLT................................................ 48 PL1WC................................................... 47 PL11C.................................................... 47 PL11SC.................................................. 47 PL11SCLT............................................... 47 (U)PL20.................................................. 27 (U)PL21.................................................. 27 PL30....................................................... 25 (U)PL40.................................................. 33 PL50....................................................... 42 PL50C..................................................... 42 PL71....................................................... 11 PL71L..................................................... 12 PL73......................................................... 6 PL73C...................................................... 6 PL74........................................................ 6 PL74C...................................................... 6 PL74MC(FL)............................................. 6 PL75(FL)................................................... 6 PL75C...................................................... 6 PL75CFL................................................... 6 PL75MC................................................... 6 PL80....................................................... 24 PL93....................................................... 41 PL94....................................................... 41 (U)PL95.................................................. 38 (U)PL121................................................ 35 Index Part Number Page Part Number (U)PL121SL............................................ 35 (U)PL122................................................ 35 (U)PL123................................................ 35 PL130C................................................... 39 PL130SC................................................. 39 PL150.................................................10,14 PL153..................................................... 20 PL153AC................................................ 20 PL155..................................................... 18 PL155AC................................................ 18 PL155ACFL............................................. 18 PL155FL.................................................. 18 (U)PL220................................................ 27 (U)PL223................................................ 35 (U)PL240................................................ 33 (U)PL250................................................ 32 PL375....................................................... 6 PL375C..................................................... 6 PL375MC................................................. 6 PL380..................................................... 24 PL803..................................................... 24 PL3155................................................... 18 PL3155AC.............................................. 18 PL3455AC.............................................. 23 PL455ACP(P/S)....................................... 23 PL455ACR(P/S)....................................... 23 PL455ACW(P/S)..................................... 23 PL4455ACF(P/S)..................................... 23 PLR74C.................................................... 6 PLR75C.................................................... 6 PLR75CFL................................................. 6 PLR130SC............................................... 40 PLR155AC............................................... 18 PLR155ACFL ........................................... 18 (U)PLR220.............................................. 27 PLR375C................................................... 6 PLR455ACP(P/S)..................................... 22 PLR455ACR(P/S)..................................... 22 PLR455ACW(P/S).................................... 22 PLR455ACFL(P/S).................................... 22 PLR3155AC............................................. 18 PLR3455AC(P/S)..................................... 22 PN2........................................................ 45 PN2A...................................................... 45 PN2C...................................................... 45 PTR-L-W.................................................. 11 PTRM-L-Z................................................ 14 PTRMX-L-Z.............................................. 14 PTRMY-L-Z.............................................. 14 PTRS-L-Z................................................. 11 PTRX-L-Z................................................. 11 PTRYL-L-Z................................................ 12 PTRY-L-Z................................................. 11 PTW-L-Z................................................. 11 PTWM-L-Z.............................................. 14 PTWMX-L-Z............................................ 14 PTWMY-L-Z............................................ 14 PTWS-L-Z............................................... 11 PTWX-L-Z............................................... 11 PTWYL-L-Z.............................................. 12 PTWY-L-Z............................................... 11 PUSH-ON COAX 120 SERIES................... 35 Page Part Number RFI CAPS & TERMINATIONS................10, 57 RFI 150-1................................................ 14 RFI 70-1.................................................. 11 RFI455(FL).............................................. 23 RFI3455.................................................. 23 RFI457(FL).............................................. 22 RFI3457.................................................. 22 RFI457(FL).............................................. 22 RT1L....................................................... 65 RT1XL..................................................... 65 RT1S....................................................... 65 RT1SS..................................................... 65 RT4L....................................................... 65 RT4S....................................................... 65 RTC-4L.................................................... 65 RTR-1L.................................................... 65 RTR-1XL.................................................. 65 SERIES INSTRUCTIONS 450/3450 SERIES..... 21 SPC8P-201.............................................. 17 SPC8S-201.............................................. 17 ST1......................................................... 62 STANDARD 19" PANELS..................... 53-54 STANDARD COAX PATCH JACKS............. 50 STANDARD COAX PATCHING & LOOPING PLUGS..................................... 49 STANDARD & MINI-WECO COAX PATCH PLUGS......................................... 46 STANDARD PANEL SPECIFICATIONS........ 51 STANDARD THREADED.......................... 24 STANDARD TWINAX/TRIAX LOOPING PLUGS..................................... 15 STC-F....................................................... 62 STC-W..................................................... 62 SUBMINIATURE 150/3150 SERIES........... 20 SUBMINIATURE BULKHEAD JACKS.......... 19 SUBMINIATURE JACKS & PLUGS.............. 18 SUBMINIATURE TWINAX/TRIAX LOOPING PLUGS..................................... 15 SUBMINIATURE PATCHING...................... 14 TBJ451P.................................................. 22 TBJ451FLP.............................................. 22 TBJ451P.................................................. 22 TBJ451S.................................................. 22 TBJ451FLS.............................................. 22 TBJ3451(P/S).......................................... 22 TN2.......................................................... 9 TN2 (TL/FL).............................................. 9 TN2 (TL/FL) A........................................... 9 TN2A....................................................... 9 TN2T........................................................ 9 TNG2-R.................................................... 8 TNG3-R.................................................... 9 TNG451FL(P/S)....................................... 23 TNG451P(S)........................................... 23 TNG3451(P/S)........................................ 23 TNGM1-1-R........................................... 14 TNM3-Z................................................. 14 TOOLS & ACCESSORIES..................... 62-64 TOOL KIT & BULK PACKAGING................. 65 TPW-1-R................................................. 47 TPT-1-R.............................................. 11,47 TROMPETER CABLE SPECS................. 66-67 Page TWINAX/TRIAX CABLE ASSEMBLY TESTER....................................................64 TWINAX/TRIAX CONNECTORS 70/370 SERIES....................................... 5-8 TWINAX/TRIAX CONNECTORS 150/3150 SERIES............................... 17-20 TWINAX/TRIAX CONNECTORS 450/3450 SERIES............................................... 21-23 TWINAX/TRIAX CONNECTORS 80/380 SERIES.............................................. 21, 24 TWINAX/TRIAX CONNECTORS 30 SERIES.............................................. 21, 25 TWINAX/TRIAX CONNECTORS/ MINIATURE PATCHING............................ 12 TWINAX/TRIAX CONNECTORS SPECIFICATIONS.................................... 2,3 TWINAX/TRIAX:PLENUM/HALOGEN FREE CABLE SPECS.................................. 68 TWO-PIN POLARIZED 30 SERIES, TWBNC/TWTNC..................................... 25 UADF20M110........................................ 37 UADF1023M95....................................... 36 UADM20F110........................................ 37 UBJ110................................................... 37 UBJ1023................................................. 36 UCBJ20F................................................ 30 UCBJ29.................................................. 31 UCBJ223................................................ 30 UCBJ250(N/G)........................................ 32 UCBJE20-1.............................................. 29 UCBJE20-2.............................................. 29 UCBBJE20-1............................................ 29 UCBBJE20-2............................................ 29 UCBBJE20-3............................................ 29 UCBBJE20-4............................................ 29 UCBBJ1023............................................. 36 UCBJR250(N/G)...................................... 32 UJ9W...................................................... 46 UPL110................................................... 37 UPL250................................................... 32 UPL1023................................................. 36 UPLR1023............................................... 36 75 OHM MINI-WECO COAX PATCH JACKS.......................................... 48 010-0097............................................... 63 010-0088............................................... 63 010-0123............................................... 64 010-0133............................................... 64 010-0208............................................... 64 105-1496............................................... 37 155-0830-1............................................ 12 305-0138................................................. 9 700-0024............................................... 62 95 96 TERMS & CONDITIONS 97 TERMS & CONDITIONS About Emerson Network Power Connectivity Solutions Emerson Network Power Connectivity Solutions US Headquarters 3000 Lakeside Drive, Ste. 308N Bannockburn, IL 60015, USA Emerson Network Power Connectivity Solutions, an Emerson business, serves the needs of wireless communications, military, telephony and data networks, CATV security systems, health care, military and industrial facilities with a full spectrum of RF/microwave and fiber optic connectivity products. For more information, visit www.EmersonConnectivity.com North America 299 Johnson Avenue, Ste. 100 Waseca, MN 56093, USA Toll Free: 800.247.8256 Tel: 507.833.8822 Fax: 507.833.6287 ECSorders@Emerson.com About Emerson Europe, Middle East, Africa Emerson Network Power Connectivity Solutions, Ltd. 7-13 Russell Way Widford Industrial Estate Chelmsford, Essex CM1 3AA Tel: +44 1245.359.515 Fax: +44 1245.358.938 EMEAConnectivitySales@Emerson.com Asia Pacific Emerson Network Power Connectivity Solutions (Shanghai) Co., Ltd. Building 1, No. 800 ShenFu Road XinZhliang Industry Park Shanghai, China 201108 Tel: +86 21.5442.7668 Fax: +86 21.5442.7628 APConnectivitySales@Emerson.com Emerson (NYSE: EMR), based in St. Louis, is a global leader in bringing technology and engineering together to provide innovative solutions to customers through its network power, process management, industrial automation, climate technologies, and appliance and tools businesses. For more information, visit www.Emerson.com www.EmersonNetworkPower.com/Connectivity www.EmersonConnectivity.com Emerson Network Power The global leader in enabling business-critical continuity. AC Power Systems Connectivity DC Power Systems Embedded Power Inbound Power Integrated Cabinet Outside Plant Precision Cooling Site Monitoring and Services Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2010 Emerson Electric Co. TEI-T24, Rev. 03/12