MMBTH10L, MMBTH10-4L, SMMBTH10-4L, NSVMMBTH10L VHF/UHF Transistor www.onsemi.com NPN Silicon Features * S and NSV Prefixes for Automotive and Other Applications * SOT-23 (TO-236) CASE 318 STYLE 6 Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant COLLECTOR 3 1 BASE MAXIMUM RATINGS Symbol Value Unit Collector-Emitter Voltage Rating VCEO 25 Vdc Collector-Base Voltage VCBO 30 Vdc Emitter-Base Voltage VEBO 3.0 Vdc Symbol Max Unit 3EM MG G 3E4 MG G 225 1.8 mW mW/C MMBTH10LT1G, NSVMMBTH10LT1G MMBTH10-04LT1G 556 C/W 3EM, 3E4 = Specific Device Code M = Date Code* G = Pb-Free Package 300 2.4 mW mW/C *Date Code orientation and/or overbar may vary depending upon manufacturing location. RJA 417 C/W TJ, Tstg -55 to +150 2 EMITTER MARKING DIAGRAMS THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR-5 Board (Note 1) TA = 25C Derate above 25C Thermal Resistance, Junction to Ambient (Note 1) Total Device Dissipation Alumina Substrate (Note 2) TA = 25C Derate above 25C Thermal Resistance, Junction to Ambient (Note 2) Junction and Storage Temperature Range PD RJA PD (Note: Microdot may be in either location) C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR-5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in. 99.5% alumina ORDERING INFORMATION Device Package Shipping MMBTH10LT1G SOT-23 (Pb-Free) 3,000 / Tape & Reel NSVMMBTH10LT1G SOT-23 (Pb-Free) 3,000 / Tape & Reel MMBTH10-4LT1G SOT-23 (Pb-Free) 3,000 / Tape & Reel MMBTH10LT3G, SMMBTH10-4LT3G SOT-23 (Pb-Free) 10,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 1994 October, 2016 - Rev. 6 1 Publication Order Number: MMBTH10LT1/D MMBTH10L, MMBTH10-4L, SMMBTH10-4L, NSVMMBTH10L ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Characteristic Min Typ Max 25 - - 30 - - 3.0 - - - - 100 - - 100 Unit OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO Collector-Base Breakdown Voltage (IC = 100 Adc, IE = 0) V(BR)CBO Emitter-Base Breakdown Voltage (IE = 10 Adc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 25 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = 2.0 Vdc, IC = 0) IEBO Vdc Vdc Vdc nAdc nAdc ON CHARACTERISTICS DC Current Gain (IC = 4.0 mAdc, VCE = 10 Vdc) MMBTH10LT1G, NSVMMBTH10LT1G MMBTH10-4LT1G, SMMBTH10-4LT3G hFE Collector-Emitter Saturation Voltage (IC = 4.0 mAdc, IB = 0.4 mAdc) - 60 120 - - - 240 - - 0.5 - - 0.95 VCE(sat) Base-Emitter On Voltage (IC = 4.0 mAdc, VCE = 10 Vdc) Vdc VBE Vdc SMALL-SIGNAL CHARACTERISTICS Current-Gain - Bandwidth Product (IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 Mhz) MMBTH10LT1G, NSVMMBTH10LT1G MMBTH10-4LT1G, SMMBTH10-4LT3G fT Collector-Base Capacitance (VCB= 10 Vdc, IE = 0, f = 1.0 MHz) Ccb Common-Base Feedback Capacitance (VCB= 10 Vdc, IE = 0, f = 1.0 MHz) Crb Collector Base Time Constant (IC= 4.0 mAdc, VCB = 10 Vdc, f = 31.8 MHz) MHz 650 800 - - - - - - 0.7 - - 0.65 - - 9.0 pF pF rbCc ps Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 MMBTH10L, MMBTH10-4L, SMMBTH10-4L, NSVMMBTH10L TYPICAL CHARACTERISTICS COMMON-BASE y PARAMETERS versus FREQUENCY (VCB = 10 Vdc, IC = 4.0 mAdc, TA = 25C) yib, INPUT ADMITTANCE 0 70 gib -10 60 -20 50 jb ib (mmhos) y ib , INPUT ADMITTANCE (mmhos) 80 -bib 40 30 1000 MHz -30 700 -40 20 400 10 0 200 -50 100 200 300 400 500 f, FREQUENCY (MHz) 700 -60 1000 0 20 10 Figure 1. Rectangular Form 30 40 50 gib (mmhos) 60 100 70 80 Figure 2. Polar Form 70 60 bfb 60 400 200 50 50 600 100 40 700 -gfb 30 jb fb (mmhos) y ib , FORWARD TRANSFER ADMITTANCE (mmhos) yfb, FORWARD TRANSFER ADMITTANCE 20 10 40 30 1000 MHz 0 -10 20 -20 -30 10 100 200 300 400 500 f, FREQUENCY (MHz) 700 1000 70 Figure 3. Rectangular Form 60 50 40 10 30 20 gfb (mmhos) 0 Figure 4. Polar Form www.onsemi.com 3 -10 -20 -30 MMBTH10L, MMBTH10-4L, SMMBTH10-4L, NSVMMBTH10L TYPICAL CHARACTERISTICS COMMON-BASE y PARAMETERS versus FREQUENCY (VCB = 10 Vdc, IC = 4.0 mAdc, TA = 25C) 0 5.0 100 4.0 200 -1.0 MPS H11 jb rb (mmhos) y rb , REVERSE TRANSFER ADMITTANCE (mmhos) yrb, REVERSE TRANSFER ADMITTANCE 3.0 400 -2.0 -brb -brb 2.0 -3.0 700 MPS H10 1.0 -4.0 -grb 0 100 200 300 400 500 f, FREQUENCY (MHz) 1000 MHz 700 1000 -5.0 -2.0 -1.8 -1.2 -0.8 Figure 5. Rectangular Form -0.4 0 0.4 grb (mmhos) 0.8 1.2 1.6 2.0 Figure 6. Polar Form yob, OUTPUT ADMITTANCE 10 1000 MHz 9.0 8.0 8.0 7.0 700 jb ob(mmhos) yob, OUTPUT ADMITTANCE (mmhos) 10 6.0 5.0 bob 4.0 6.0 4.0 400 3.0 200 2.0 2.0 gob 1.0 100 0 0 100 200 300 400 500 f, FREQUENCY (MHz) 700 1000 0 Figure 7. Rectangular Form 2.0 4.0 6.0 gob (mmhos) Figure 8. Polar Form www.onsemi.com 4 8.0 10 MMBTH10L, MMBTH10-4L, SMMBTH10-4L, NSVMMBTH10L PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AR D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 --- 10 MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0 INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 --- MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBTH10LT1/D