Description
The Power-One PMP 7 rectifier module
provides a cost-effective power solution
in the highest possible density. Built on
the latest advances in the resonance
switch mode approach (soft-switching),
the PMP 7 is the next evolution in our
small convection cooled rectifier series.
Optimized for telecom applications, the
module is designed to work in a multitude
of different subrack/shelf configurations
incorporating the Power-One PCU
controller and various distribution
options.
Features
•
208/240 VAC input
•
24V, 48V, or 60V DC output
•
Input overvoltage disconnection
•
Thermal protection
•
Active load sharing
•
Hot-swappable
•
Up to 92% efficient
•
International standards compliance
•
Natural convection cooling
•
Low weight
PPS 7 3500 System
Shown
PMP 7
Rectifier Module
www.power-one.com
Input
Model PMP 7.24 PMP 7.48 PMP 7.60
Input
Voltage
205-250V AC ±10% single phase,
(44-66Hz) (-15% for PMP7.60)
185-160V at reduced output power
Current
(max.) <3.55A <4.35A <4.35A
Soft Start <11A peak
max. 5ms <15.5A peak
max. 5ms <20A peak
max. 5ms
Harmonics EN 61000-3-2
Power Factor >0.99 at max. load
Surge
Immunity EN 61000-4-5
Fuse T 6,3A
Connection IEC-320/C14
EMC EN 61000-6-2, EN 61000-6-3,
FCC Part 15 Class B
Output
Mechanical
Dimensions 62 x 129 x 232mm
(2.4 x 5.1 x 9.1in.)
Weight 1.65kg (3.6lbs.)
Cooling Natural convection
Insulation Reinforced insulation tested at:
4.25 kV DC primary-secondary,
2.12 kV DC primary-ground,
0.75 kV DC secondary ground
Enclosure IP20
Mounting In 19” subrack up to 5 modules
Other Technical Data
Model PMP 7.24 PMP 7.48 PMP 7.60
Output
Voltage 22.5-28VDC 45-56VDC 56-70.5VDC
Power (max.) 560W 672W 635W
Current
(max.) 20A 12A 9A
Efficiency
(at 40-90% load)* >89.5% >92% >92%
Tolerance Vout +/- 1%
Transient
Response +/- 5% at load variation 10-90%
or 90-10%, recovery time 10ms
Load Sharing <5% of nominal current
Ripple <100mV p-p (BW. 30MHz)
Psophometric <2mV, according to CCITT norms
Connection DIN 41612F
EMC EN 61000-6-2, EN 61000-6-4
Safety EN 60950
UL 1950 and IEC60950 , Class 1
CSA C22-2 No. 950
Protection
Short circuit proof, automatic
current limiting, selective shutdown
of modules at excessive output
voltage. Thermal protection
reduces the output power at
environmental temperatures above
maximum level. Shut down at
>75°C with an automatic restart.*
Input over-voltage disconnection at
>275VAC with automatic reset at
>260VAC.
Indications
Green LED
Red LED
Red LED
Power ON
High output
voltage/ shutdown
Low voltage/
module failure
Audible
Noise <35dBA
Operating
Temperature* -25 to +55°C up to 2000m
-25 to +45°C above 2000m
Storage
Temperature -40 to +85°C
Radiated EMC EN 61000-6-2, EN 61000-6-3,
FCC Part 15, Class B
Environment Storage:
Transport:
Operation:
ETS 300 019-2-1
ETS 300 019-2-2
ETS 300 019-2-3
Note: All specifications are subject to change without notification.
*Average performance for a single module.
www.power-one.com
11V0005-028 PMP 7 V3.0
PMP 7
Rectifier Module
