PXO TQDILC Typical Applications Base Stations Test Equipment Synthesizers Features AT-Cut Crystal Dual-inline oszillator Hermetically Sealed Package Surface Mount Option Frequency range 1 MHz - 8 MHz Standard frequencies Frequency stabilities Parameter vs. operating temperature range Parameter Initial tolerance Code II Frequency stability Operating temp range 34 32 10 12 14 16 18 15 ppm 10 ppm 50 ppm 20 ppm 10 ppm 7.5 ppm 5 ppm -40 ... +90C -30 ... +80C -20 ... +70C Code I Frequency stability Condition 01 02 03 05 07 100 ppm 50 ppm 20 ppm 10 ppm 5 ppm @ 25C RF output Parameter Signal Load Rise and Fall time Duty cycle Value Condition HCMOS 15pF 10% < 5ns 40/60 % @ 15pF & 10 to 90% @Vs/2 Value Condition Supply voltage Parameter Supply voltage (VS) Current consumption 5.0 V 5 % < 20 mA Additional parameters Parameter Phase Noise Weight Operable temperature range Storage temperature range Processing & Packing Corning Frequency Control * Worldwide Data Book 2001 Value < - 80 dBc/Hz < - 110 dBc/Hz < - 135 dBc/Hz < -145 dBc/Hz < - 150 dBc/Hz <6g -40 ... +90C -55 ... +125C Condition 10 100 1 10 100 Hz Hz kHz kHz kHz Note 1 handling&processing note v1.0.2000-10-31 Corning Frequency Control Inc. * 100 Watts Street * Mt. Holly Springs, PA 17065 * Tel 1-717-486-3411 * Fax 1-717-486-5920 * www.corningfrequency.com Tele Quarz GmbH & Co. KG * Landstrasse * D-74924 Neckarbischofsheim, Germany * Tel +49-7268-801-0 * Fax +49-07268-801-281 * www.telequarz.de 1/2 PXO TQDILC Additional Parameters Parameter Option I Screening S B C Condition Screening MIL STD 883 C method 5008.2 class B Screening MIL-O-55310, Class B Screening MIL-O-55310, Class C Enclosure Type Option II Case Blank A G125 G175 Condition Drawing 22,7max. 20,7max. G 125 15,240,3 8 14 8 1 7 H = 9,4; G175 Standard 15,1max. 10,9max. 13,1max. 14 7,62 0,3 7 4,58 0,5 12,20,5 1 G 175 18,5max. H = 7,5max.; G125 Standard 0,2 H Pin 1 corner 5,85min. 0,8max. H S Auflage flache o0,45 0,1 15,24 N.C. GND, Case RF-Output Supply voltage (VS) 0,1 13,2 Pin Connections Pin 1 Pin 7 Pin 8 Pin 14 0,1 0,1 1,8 S all units in mm Ordering Code Model Example: Order: Note 1 TQDILC TQDILC Code I Adjustment tolerance 05. Code II Frequency Stability 14. Option I Option II Screening Case Frequency A 4M0000 Typical values @ 4 MHz Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) Subject to technical modification; Not all options and codes are available at all Frequencies Corning Frequency Control * Worldwide Data Book 2001 v1.0.2000-10-31 Corning Frequency Control Inc. * 100 Watts Street * Mt. Holly Springs, PA 17065 * Tel 1-717-486-3411 * Fax 1-717-486-5920 * www.corningfrequency.com Tele Quarz GmbH & Co. KG * Landstrasse * D-74924 Neckarbischofsheim, Germany * Tel +49-7268-801-0 * Fax +49-07268-801-281 * www.telequarz.de 2/2