SURFACE MOUNT DISPLAY APSC03-41MWWA WHITE Features Description !0.3 INCH The source color devices are made with GaN on SiC !LOW DIGIT HEIGHT. CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. Light Emitting Diode. Static electricity and surge damage the LEDS. It is !I.C. COMPATIBLE. recommended to use a wrist band or anti-electrostatic !MECHANICALLY glove when handling the LEDs. !GRAY RUGGED. FACE,WHITE SEGMENT. !PACKAGE : 1100PCS / REEL. All devices, equipment and machinery must be electrically grounded. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAB2955 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APSC03-41MWWA WHITE (GaN) L en s Ty p e WHITE DIFFUSED Iv (m c d ) @ 20 m A D es c r i p t i o n Min . Ty p . 4 13.5 Common Cathode,Rt. Hand Decimal Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er VF Forward Voltage IR Reverse Current D ev i c e Ty p . Max . Un it s Tes t Co n d it io n s White 3.8 4.5 V I F =20mA White - 10 uA V R = 5V 0.33 - - - 0.34 - - - X Chromaticity Coordinates White Y Absolute Maximum Ratings at T)=25C P ar am e t e r Wh it e Un it s Power dissipation 105 mW DC Forward Current 30 mA Forward Current (Peak) [1] 150 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB2955 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 2 OF 4 White APSC03-41MWWA APSC03-41MWWA SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. SPEC NO: DSAB2955 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 3 OF 4 Recommended Soldering Pattern (Units : mm) Tape Specification (Units : mm) SPEC NO: DSAB2955 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 4 OF 4