tyco Qualification Test 501-57118 Electronics Report 12-AUG-2005 Rev B COMPACT FLASH CARD, 1.27mm(.050) PITCH 1. INTRODUCTION 1.1. Purpose Testing was performed on the Tyco COMPACT FLASH CARD, 1.27mm(.050) PITCH to determine its conformance to the requirements of Product Specification 108-57134 Revision B. 1.2. Scope This report covers the electrical, mechanical, and environmental performance of the COMPACT FLASH CARD, 1.27mm(.050). 1.3. Conclusion The COMPACT FLASH CARD, 1.27mm(.050) Connector meets the electrical, mechanical, and environmental performance requirements of Product Specification 1008-57134 Revision B. 1.4. Product Description The COMPACT FLASH CARD, 1.27mm(.050) Connector is designed for printed circuit board applications. The contacts are copper alloy, Gold plated on the contact interface and Tin plating on the soldertail, all over nickel under-plated. The housing material is glass filled insulating polymer, UL94V-0. 1.5. Test samples The test samples were randomly selected from normal current production lots, and the following part numbers were used for test : Test Group | Quantity | Description COMPACT FLASH CARD, A, B, C, D, E, F, G, H, |, 5EA. compact DR DATE | APVD DATE Oblic Hu 12-Aug-2005 | Wei-Jei Ke 12-Aug-2005 P-05-000084 t, Co TYCO Holdings (Bermuda) VII LTD. . This specification is a controlled document. of sen 1 of 4 Flectronics Taipei, 1070, Taiwan. ROC. Loc DW TEL : 886-2-8768-2788tyco Flectronics 501-57118 1.6. QUALIFICATION TEST SEQUENCE Test Group Test or Examination A B C D E F G H | Test Sequence (a) 9/1,6/1,5)1,511,5]1,5 8/2,5|/2,4|)2,412,4|]2,4 Examination of Product 1,7/|1 1,311,3 Contact Resistance 2, Dielectric withstanding Voltage 3,6 Insulation Resistance 2,5 jMating Force 3,7 Unmating Force 4,6 Durability 5 Vibration {Mechanical Shock Contact Retention Force 4 Solderability 2 Resistance to Soldering Heat 2 Thermal Shock 3 Humidity Temperature Cycling 4 3 Temperature Life 3 Salt Spray 3 lO Figure 1. NOTE : (a) Numbers indicate sequence in which tests are performed. Rev B 2 of 4tyco Flectronics 501-57118 . TEST RESULT GP TEST SPEC. DATA Max. Min. Mean oO Insulation Resistance 1000 MQ Min. OK OK OK -- Dielectric withstanding Voltage [500 VAC 1Minute OK OK OK - A Humidity Temperature Cycling 25-65'C 95%, 10cycle OK OK OK - Insulation Resistance 1000 MQ Min. OK OK OK -- Dielectric withstanding Voltage [500 VAC 1Minute OK OK OK - Appearance No Damaged OK OK OK - Contact Resistance 40 mQ Max. 28.58Mm QE |26.24mQ |27.46mMQ -- Mating Force 2.94 kgf Max 1.28kg | 1.12kg | 1.16kg - Unmating Force 0.5 kgf Min 1.11kg | 0.972kg | 1.52kg - B Durability 1000 Cycle 2.26kg | 1.01kg | 1.64kg - Unmating Force 0.5 kgf Min 2.31kg | 2.18kg | 2.22kg - Mating Force 2.94 kgf Max 2.48kg | 2.22kg | 2.34kg - Contact Resistance 40 mQ Max. 28.82m |26.68m |27.74mMQ -- Appearance No Damaged OK OK OK -- Contact Resistance 40 mQ Max. 28.56m |26.60m |27.42mQ -- Vibration 10-55-10 Hz OK OK OK - C |Mechanical Shock S0G, 11mSec OK OK OK -- Contact Resistance 40 mQ Max. 28.64m |26.83m |27.76mMQ -- Appearance No Damaged OK OK OK - Contact Resistance 40 mQ Max. 28.72MQ |26.41MOQ |27.42mQ -- Thermal Shock -55C, +85C 5 Cycle OK OK OK -- p Contact Resistance 40 mQ Max. 29.61mMQ |27.15mQ |28.67mQ -- Appearance No Damaged OK OK OK - Contact Resistance 40 mQ Max. 28.18MQ |26.36MQ |27.37MQ - E Humidity Temperature Cycling [25-65C,, 95%, 10cycle OK OK OK - Contact Resistance 40 mQ Max. 32.64mQ |27.48mQ |28.43mQ - Appearance No Damaged OK OK OK - Figure 2 (Con. ) Rev B 3 of 4tyco Flecionius 501-57118 ectronics DATA GP TEST SPEC. Max. Min. Mean Oo Contact Resistance 40 mQ Max. 28.53m |26.48m Q | 27.52mQ -- Fc Temperature Life 85C 250Hr OK OK OK -- Contact Resistance 40 mQ Max. 29.58m |26.87MQ |28.72mMQ -- Appearance No Damaged OK OK OK - Contact Resistance 40 mQ Max. 28.67M |26.16MQ | 27.32mMQ -- Salt Spray 35C, 5%Salt, 48hours OK OK OK -- G Contact Resistance 40 mQ Max. 31.68MQ |28.74mQ |29.62mQ -- Appearance No Damaged OK OK OK -- Resistance to Solder Heat No Damaged OK OK OK -- H_ Appearance No Damaged OK OK OK -- Contact Retention Force ikg MIN. 2.0kg 2.0kg 2.0Kg -- Solderbility 235C, 5sec OK OK OK -- Appearance No Damaged OK OK OK -- Figure 2 (End ) Rev B 4 of 4