DC/DC Converters TEN 6N Series, 6 Watt CB Scheme IEC 60950-1 Features 2:1 input voltage range High efficiency Operating temperature range UL 60950-1 -40C to +85C No minimum load required Input filter meets EN 55022, class A Overload protection I/O-isolation 1'500 VDC DIP-24 plastic package The TEN-6N series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Industry standard pinout 3-year product warranty Models Order code Input voltage range Output voltage Output current max. Efficiency typ. 3.3 VDC 1200 mA 75 % TEN 6-1211N 5 VDC 1200 mA 78 % TEN 6-1212N 12 VDC 500 mA 82 % 400 mA 82 % TEN 6-1210N TEN 6-1213N 9 - 18 VDC 15 VDC TEN 6-1215N (12 VDC nominal) 24 VDC 250 mA 84 % TEN 6-1221N 5 VDC 500 mA 78 % TEN 6-1222N 12 VDC 250 mA 82 % TEN 6-1223N 15 VDC 200 mA 82 % TEN 6-2410N 3.3 VDC 1200 mA 77 % TEN 6-2411N 5 VDC 1200 mA 80 % TEN 6-2412N 12 VDC 500 mA 84 % TEN 6-2413N 18 - 36 VDC 15 VDC 400 mA 84 % TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421N 5 VDC 500 mA 80 % TEN 6-2422N 12 VDC 250 mA 84 % TEN 6-2423N 15 VDC 200 mA 84 % TEN 6-4810N 3.3 VDC 1200 mA 77 % TEN 6-4811N 5 VDC 1200 mA 80 % TEN 6-4812N 12 VDC 500 mA 84 % TEN 6-4813N 36 - 75 VDC 15 VDC 400 mA 84 % TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821N 5 VDC 500 mA 80 % TEN 6-4822N 12 VDC 250 mA 84 % TEN 6-4823N 15 VDC 200 mA 84 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEN 6N Series 6 Watt Input Specifications Input current at no load Input current at full load 12 24 48 12 Vin models: 40 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Vin, 3.3VDC 12 Vin other Vin, 3.3VDC 24 Vin other Vin, 3.3VDC 48 Vin other models: models: models: models: models: models: 440 mA typ. 610 mA typ. 220 mA typ. 300 mA typ. 110 mA typ. 150 mA typ. Recommended input fuse (slow blow) 12 Vin models: 1500 mA 24 Vin models: 700 mA 48 Vin models: 350 mA Start-up voltage / under voltage shut down 12 Vin models: 9.0 VDC / 8.5 VDC (or lower) 24 Vin models: 18 VDC / 16 VDC (or lower) 48 Vin models: 36 VDC / 35 VDC (or lower) Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise internal filter to meet EN 55022 class A Output Specifications Voltage set accuracy 2 % Regulation - Input variation Vin min. to Vin max. - Load variation 0 - 100 % single output models: dual output models balanced load: dual output models 50%/100% unbalanced load: 0.5 % max. 1.2 % max. 1.2 % max. 3.0 % max. Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 80 mVp-p max. Dynamic load response (change from 75 % to 100 % load) 3 % peak variation typ. 300 S response time typ. Current limitation 145 % of Iout max. typ., constant power Short circuit protection continuous, automatic recovery Capacitive load 3.3 & 5.0 VDC 12 & 15 VDC 24 VDC dual output models: models: models: models: 470 F max. 100 F max. 47 F max. 100 F max. (each output) General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -50C to +125C Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60C other models: 3.3 %/K above +70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio. h Isolation voltage (60 sec.) - Input/Output 1'500 VDC (functional insulation) Isolation capacitance - Input/Output (100 KHz, 1 V) 1000 pF typ. Isolation resistance - Input/Output (500 VDC) >1`000 M Ohm Switching frequency 330 kHz typ. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 6N Series 6 Watt General Specifications Safety standards UL/cUL 60950-1, IEC/EN 60950-1 - Certification documents www.tracopower.com/overview/ten6n Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non conductive plastic (UL 94V-0-rated) Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated) Weight 13.0 g (0.46 oz) Soldering temperature (1.5mm from case for 10 sec.) max. 260C Supporting documents: www.tracopower.com/overview/ten6n Outline Dimensions (0.60) Pin Single Dual 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) (1.25) 4.1 4.5 (0.18) 2.54 (0.10) 15.24 (0.60) 9 No pin Common 11 No function -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (0.16) 10.2 (0.40) 31.8 (0.80) 14 2.54 16 15.24 Bottom view 23 22 Pin-Out 11 20.3 9 (0.10) 2 3 5.08 (0.20) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.25 (0.01) Pin pich tolerances 0.13 (0.0005) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 10, 2018 Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEN 6-2411N TEN 6-1215N TEN 6-2422N TEN 6-4813N TEN 6-1223N TEN 6-4811N TEN 6-2413N TEN 64812N TEN 6-4822N TEN 6-1212N TEN 6-4821N TEN 6-2410N TEN 6-1213N TEN 6-1221N TEN 6-1222N TEN 6-4815N TEN 6-4823N TEN 6-1211N TEN 6-1210N TEN 6-2412N TEN 6-2421N TEN 6-2415N TEN 6-2423N TEN 6-4810N