http://www.tracopower.com Page 1 of 3
DC/DC Converters
TEN 6N Series, 6 Watt
Features
◆ 2:1 input voltage range
◆ High efficiency
◆ Operating temperature range
–40°C to +85°C
◆ No minimum load required
◆ Input filter meets EN 55022, class A
◆ Overload protection
◆ I/O-isolation 1’500 VDC
◆ DIP-24 plastic package
◆ Industry standard pinout
◆ 3-year product warranty
The TEN-6N series is designed for an optimized cost/performance ratio of
DC/DC converters with output power of 6 Watt.
General features like no minimum load requirement, overload protection, internal
filter for EN55022 class A and high efficiency make these converters easy to design
in. With the popular DIP-24 standard package they are also a drop in replacement
for many cost critical applications.
Order code Input voltage range Output voltage Output current max. Efficiency typ.
TEN 6-1210N 3.3 VDC 1200 mA 75 %
TEN 6-1211N 5 VDC 1200 mA 78 %
TEN 6-1212N 12 VDC 500 mA 82 %
TEN 6-1213N 9 – 18 VDC 15 VDC 400 mA 82 %
TEN 6-1215N (12 VDC nominal) 24 VDC 250 mA 84 %
TEN 6-1221N ±5 VDC ±500 mA 78 %
TEN 6-1222N ±12 VDC ±250 mA 82 %
TEN 6-1223N ±15 VDC ±200 mA 82 %
TEN 6-2410N 3.3 VDC 1200 mA 77 %
TEN 6-2411N 5 VDC 1200 mA 80 %
TEN 6-2412N 12 VDC 500 mA 84 %
TEN 6-2413N 18 – 36 VDC 15 VDC 400 mA 84 %
TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 %
TEN 6-2421N ±5 VDC ±500 mA 80 %
TEN 6-2422N ±12 VDC ±250 mA 84 %
TEN 6-2423N ±15 VDC ±200 mA 84 %
TEN 6-4810N 3.3 VDC 1200 mA 77 %
TEN 6-4811N 5 VDC 1200 mA 80 %
TEN 6-4812N 12 VDC 500 mA 84 %
TEN 6-4813N 36 – 75 VDC 15 VDC 400 mA 84 %
TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 %
TEN 6-4821N ±5 VDC ±500 mA 80 %
TEN 6-4822N ±12 VDC ±250 mA 84 %
TEN 6-4823N ±15 VDC ±200 mA 84 %
Models
UL 60950-1
C B
Scheme
IEC 60950-1
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TEN 6N Series 6 Watt
Input Specifications
Input current at no load 12 Vin models: 40 mA typ.
24 Vin models: 20 mA typ.
48 Vin models: 10 mA typ.
Input current at full load 12 Vin, 3.3VDC models: 440 mA typ.
12 Vin other models: 610 mA typ.
24 Vin, 3.3VDC models: 220 mA typ.
24 Vin other models: 300 mA typ.
48 Vin, 3.3VDC models: 110 mA typ.
48 Vin other models: 150 mA typ.
Recommended input fuse (slow blow) 12 Vin models: 1500 mA
24 Vin models: 700 mA
48 Vin models: 350 mA
Start-up voltage / under voltage shut down 12 Vin models: 9.0 VDC / 8.5 VDC (or lower)
24 Vin models: 18 VDC / 16 VDC (or lower)
48 Vin models: 36 VDC / 35 VDC (or lower)
Surge voltage (1 sec. max.) 12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise internal filter to meet EN 55022 class A
Output Specifications
Voltage set accuracy ±2 %
Regulation – Input variation Vin min. to Vin max. 0.5 % max.
– Load variation 0 – 100 % single output models: 1.2 % max.
dual output models balanced load: 1.2 % max.
dual output models 50%/100% unbalanced load: 3.0 % max.
Minimum load not required
Temperature coefficient ±0.02 %/K
Ripple and noise (20 MHz Bandwidth) 80 mVp-p max.
Dynamic load response (change from 75 % to 100 % load) ±3 % peak variation typ.
300 μS response time typ.
Current limitation 145 % of Iout max. typ., constant power
Short circuit protection continuous, automatic recovery
Capacitive load 3.3 & 5.0 VDC models: 470 μF max.
12 & 15 VDC models: 100 μF max.
24 VDC models: 47 μF max.
dual output models: 100 μF max. (each output)
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +100°C max.
– Storage –50°C to +125°C
Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60°C
other models: 3.3 %/K above +70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h
Isolation voltage (60 sec.) – Input/Output 1’500 VDC (functional insulation)
Isolation capacitance – Input/Output (100 KHz, 1 V) 1000 pF typ.
Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 330 kHz typ.
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TEN 6N Series 6 Watt
Outline Dimensions
Pin Single Dual
2–Vin (GND) –Vin (GND)
3–Vin (GND) –Vin (GND)
9No pin Common
11 No function –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. July 10, 2018
General Specifications
Safety standards UL/cUL 60950-1, IEC/EN 60950-1
– Certification documents www.tracopower.com/overview/ten6n
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non conductive plastic (UL 94V-0-rated)
Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated)
Weight 13.0 g (0.46 oz)
Soldering temperature (1.5mm from case for 10 sec.) max. 260°C
911
2223
23
16 14
Bottom view
15.24
2.54
20.3
(0.10)
(0.60)
(0.80)
10.2 (0.40)4.1
(0.16)
2.54 15.24 5.08
4.5
31.8
(0.10)
(0.60)
(0.20)
(0.18)
(1.25)
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.25 (±0.01)
Pin pich tolerances ±0.13 (±0.0005)
Supporting documents: www.tracopower.com/overview/ten6n
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TRACO Power:
TEN 6-2411N TEN 6-1215N TEN 6-2422N TEN 6-4813N TEN 6-1223N TEN 6-4811N TEN 6-2413N TEN 6-
4812N TEN 6-4822N TEN 6-1212N TEN 6-4821N TEN 6-2410N TEN 6-1213N TEN 6-1221N TEN 6-1222N TEN
6-4815N TEN 6-4823N TEN 6-1211N TEN 6-1210N TEN 6-2412N TEN 6-2421N TEN 6-2415N TEN 6-2423N
TEN 6-4810N
