Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series: TPE Size B Features Small sizeL 3.5 x W 2.8 x H 1.9 mm Low ESR15 m RoHS compliance, Halogen free Specifications Size code B2 Category temp. range -55 to +105 Rated volt. range 2.0 V.DC to 10 V.DC Category volt. range 1.8 V.DC to 8.0 V.DC Rated cap. range 47 F to 470 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list Surge voltage Rated voltage x 1.15 +105 C, 1000 h rated voltage applied Rated temp, +85 C Products : +85 C, 1000 h, rated voltage applied Endurance Capacitance change Within 20 % of the initial value Dissipation factortan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, -20 % of the initial value (2R5TPE220MAZB (MAPB, MAFB)2R5TPE330MAZB Capacitance change Damp heat (Steady State) 2TPE330MAFB (MADGB)2TPE470MAJGB (MAFB)2TPE330MFB ETPE330MAFB (MA9GB)) Within +40 %, -20 % of the initial value (Except for above model) Dissipation factortan ) 1.5 times of the initial limit Leakage current Marking 3 times of the initial limit Dimensions (not to scale) R.capacitance code L W Polarity marking(+) R.voltage code d 2.0 e 2.5 g 4.0 R.capacitance code S7 47 A8 100 C8 120 E8 150 j k A J8 N8 S8 UnitV.DC H Lot No. R. voltage code S S W1 6.3 8.0 10.0 UnitF 220 330 470 Size code B2 Unit L0.2 W0.2 H0.1 S0.2 W10.1 3.5 2.8 1.9 0.8 2.2 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25-Apr-19 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated voltag temp. e () (V.DC) 2 2.5 4 6.3 Category Category voltage temp. V.DC Rated cap. F Case size L W H Specifications Size *1 Ripple code ESR*2 *3 current (m max.) tan (mA r.m.s.) 105 2.0 105 85 1.8 105 85 1.8 105 85 1.8 105 85 1.8 105 85 2.0 105 105 Floor life level Standard Min. LC*4 Part number A Packaging Q'ty (pcs) 3.5 2.8 1.9 2000 15 0.08 132.0 2TPE330MFB 2000 3.5 2.8 1.9 2000 15 0.08 132.0 2TPE330MAFB 2000 3.5 2.8 1.9 2000 13/300kHz 0.10 132.0 2TPE330MADGB 2000 3.5 2.8 1.9 2300 15 0.10 188.0 2TPE470MAFB 2000 3.5 2.8 1.9 2300 11/300kHz 0.08 188.0 2TPE470MAJGB 2000 105 3.5 2.8 1.9 2000 15 0.08 110.0 2R5TPE220MAFB 2000 2.5 105 3.5 2.8 1.9 1800 15/300kHz 0.08 110.0 2R5TPE220MFGB 2000 2.5 105 3.5 2.8 1.9 1700 21 0.08 55.0 2R5TPE220MLB 2000 330 470 220 85 2.0 105 3.5 2.8 1.9 1600 25 0.08 55.0 2R5TPE220MAPB 2000 105 2.5 105 3.5 2.8 1.9 1400 35 0.08 55.0 2R5TPE220MZB 2000 85 2.0 105 3.5 2.8 1.9 1400 35 0.08 55.0 2R5TPE220MAZB 2000 85 2.0 105 3.5 2.8 1.9 1400 35 0.08 82.5 2R5TPE330MAZB 2000 85 2.0 105 3.5 2.8 1.9 3200 9/300kHz 0.08 165.0 ETPE330MA9GB 2000 105 2.5 105 3.5 2.8 1.9 3200 9/300kHz 0.08 165.0 ETPE330M9GB 2000 85 2.0 105 3.5 2.8 1.9 B2 2700 15 0.08 165.0 ETPE330MAFB 2000 105 2.5 105 3.5 2.8 1.9 2700 15 0.08 165.0 ETPE330MFB 2000 105 4.0 105 100 3.5 2.8 1.9 1400 35 0.08 40.0 4TPE100MZB 2000 85 3.2 105 150 3.5 2.8 1.9 1400 35 0.08 60.0 4TPE150MAZB 2000 220 3.5 2.8 1.9 1400 35 0.08 88.0 4TPE220MAZB 2000 3.5 2.8 1.9 1600 25 0.08 63.0 6TPE100MPB 2000 3.5 2.8 1.9 1400 35 0.08 63.0 6TPE100MAZB 2000 3.5 2.8 1.9 1400 35 0.08 63.0 6TPE100MZB 2000 3.5 2.8 1.9 1400 35 0.08 75.6 6TPE120MAZB 2000 3.5 2.8 1.9 1600 25 0.08 94.5 6TPE150MAPB 2000 3.5 2.8 1.9 1400 35 0.08 94.5 6TPE150MAZB 2000 3.5 2.8 1.9 1400 35 0.10 138.6 6TPE220MAZB 2000 138.6 6TPE220MAPB 2000 85 3.2 105 105 6.3 105 85 5.0 105 105 6.3 105 85 5.0 105 85 5.0 105 85 5.0 105 85 5.0 105 330 100 120 150 220 85 5.0 105 3.5 2.8 1.9 1600 25 0.10 8 85 6.3 105 100 3.5 2.8 1.9 1400 35 0.08 80.0 8TPE100MAZB 2000 10 85 8.0 105 47 3.5 2.8 1.9 1400 35 0.08 47.0 10TPE47MAZB 2000 Reflow Reflow temp temp 260 250 3 3 *1: Ripple current100 kHz / +45 *2: ESR100 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 5 minutes Please refer to each page in this catarog for "Reflow conditions" and "Taping specifications". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25-Apr-19 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series: TPE Size D Features Low profile (Height 1.5 mm max.) Low ESR (7 m) Large capacitance (1500 F max.) RoHS compliance, Halogen free Specifications Size code D15E D2E Category temp. range D3L D4 -55 to +105 Rated volt. range 6.3 V.DC Category volt. range 5.0 V.DC Rated cap. range 470 F 2.5 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC 68 F to 470 F 220 F to 680 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list Surge voltage 330 F to 1500 F Rated voltage x 1.15 +105 C, 2000 h rated voltage applied Rated temp, +85 C Products : +85 C, 1000 h, rated voltage applied 6TPE330MAP, 6TPE470MAZU : +85 C, 2000 h, Endurance Capacitance change Within 20 % of the initial value Dissipation factortan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, -20 % of the initial value Capacitance change Damp heat (Steady State) (2R5TPE220M (IF9)2R5TPE330M (IFC97) 2R5TPE470M (IFC97)2R5TPE1000MF2R5TPE1500M (FC)) Within +40 %, -20 % of the initial value (Except for above model) Dissipation factortan ) 1.5 times of the initial limit Leakage current Marking Dimensions (not to scale) R.capacitance (F) L W Polarity marking(+) 3 times of the initial limit H Lot No. R.voltage code R.voltage code e 2.5 g 4.0 j A UnitV.DC 6.3 10.0 S Size code D15E D2E D3L D4 S W1 Unit L0.2 W0.2 H0.1 S0.2 W10.1 7.3 4.3 1.4 1.1 2.4 7.3 4.3 1.8 1.3 2.4 7.3 4.3 2.8 1.3 2.4 7.3 4.3 3.8 1.3 2.4 Externals of figure are the reference. 1 0.1 :D15ED2E Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25-Apr-19 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated voltag temp. e () (V.DC) 2.5 4 6.3 10 Category Category voltage temp. V.DC Rated cap. F Case size L W H Specifications Size *1 Ripple code ESR*2 *3 current (m max.) tan (mA r.m.s.) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 85 85 85 85 105 105 105 85 85 105 105 105 105 105 105 105 105 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.3 6.3 6.3 6.3 6.3 6.3 6.3 5.0 5.0 5.0 5.0 6.3 6.3 6.3 5.0 5.0 6.3 6.3 6.3 6.3 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 220 330 470 680 1000 1500 150 220 330 470 100 150 220 330 470 680 68 220 330 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 3.8 3.8 3.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 2.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 2.8 2.8 3.8 1.4 3.8 3.8 3.8 3.8 1.8 2.8 2.8 3.8 D2E D3L D4 D2E D3L D2E D3L D4 D15E D4 D2E D3L D4 3900 3100 2800 2400 4400 3900 3500 3100 2800 2400 4400 3900 3500 3100 2800 3500 3100 3900 4400 3900 2800 3100 2800 2400 2800 2400 3500 3100 2800 2400 2800 2400 3100 2800 2400 2800 2400 2400 2400 2400 3900 3100 2800 2400 4400 1700 3500 3000 3500 3000 2400 2800 2400 3000 9 15 18 25 7 9 12 15 18 25 7 9 12 15 18 12 15 15 12 15 18 15 18 25 18 25 12 15 18 25 18 25 15 18 25 18 25 25 25 25 9/500kHz 15 18 25 10 35 18 25 18 25 25 18 25 25 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.10 Floor life level Standard Min. LC*4 Part number A 55.0 55.0 55.0 55.0 82.5 82.5 82.5 82.5 82.5 82.5 117.5 117.5 117.5 117.5 117.5 170.0 170.0 250.0 375.0 375.0 60.0 88.0 88.0 88.0 132.0 132.0 188.0 188.0 188.0 188.0 63.0 63.0 94.5 94.5 94.5 138.6 138.6 138.6 207.9 207.9 207.9 207.9 207.9 207.9 207.9 296.1 296.1 296.1 428.4 428.4 68.0 220.0 220.0 330.0 Packaging Q'ty (pcs) 2R5TPE220M9 2R5TPE220MF 2R5TPE220MI 2R5TPE220M 2R5TPE330M7 2R5TPE330M9 2R5TPE330MC 2R5TPE330MF 2R5TPE330MI 2R5TPE330M 2R5TPE470M7 2R5TPE470M9 2R5TPE470MC 2R5TPE470MF 2R5TPE470MI 2R5TPE680MCL 2R5TPE680MFL 2R5TPE1000MF 2R5TPE1500MC 2R5TPE1500MF 4TPE150MI 4TPE220MF 4TPE220MI 4TPE220M 4TPE330MI 4TPE330M 4TPE470MCL 4TPE470MFL 4TPE470MIL 4TPE470ML 6TPE100MI 6TPE100M 6TPE150MF 6TPE150MI 6TPE150M 6TPE220MI 6TPE220M 6TPE220MAP 6TPE330MAP 6TPE330MAL 6TPE330MA9EL 6TPE330MFL 6TPE330MIL 6TPE330ML 6TPE330MAA 6TPE470MAZU 6TPE470MI 6TPE470M 6TPE680MI 6TPE680M 10TPE68M 10TPE220MIL 10TPE220ML 10TPE330M 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2000 2000 2000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 2500 2000 4000 2000 2000 2000 2000 3000 2500 2500 2000 Reflow Reflow temp temp 260 250 3 - 2a 3 - *1: Ripple current100 kHz / +45 *2: ESR100 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 5 minutes Please refer to each page in this catarog for "Reflow conditions" and "Taping specifications". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25-Apr-19 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19