Scotchlok™Terminals
MNG18-187DMI, MNG14-187DMI
Male Disconnect, Nylon Fully Insulated
with Insulation Grip
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted with Insulation
Grip
Maximum Voltage Rating: 600 V Building Wire
1000 V Signs or
Fixtures (Luminaires)
Maximum Temperature Rating: 221˚F (105˚C)
Maximum Current: Same as Wire
Insulator Material: Nylon
Terminal Material: ETP Copper
Insulation Grip Material: Brass
Plating: Tin
Installation Information
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or TR-482,
TR490 (ratchet style) hand tools.
Barrel Crimp (Electrical)
L
D
W
W´
Suitable for factory application on steel or brass tabs
UL or CSA.
Suitable for field application on brass tabs, strain relief
required, UL only.
Insulation Crimp
(Mechanical)
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 310
3M FILE NO. E70512
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. C22.2
NO. 153
3M FILE NO. LR22190
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electr ical codes.
rebmuNtcudorP
eriW egnaR )GWA(
baTelaM )´W(htdiW ssenkcihTxLWD
lerraB htgneL lerraB .D.I
IMD781-81GNM81-22020.0x781.078.073.003.042.0541.0
IMD781-41GNM41-61020.0x781.078.073.003.042.0541.0
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8125-9870-0-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all r isks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Engineering Specification
Crimp-Type Male Quick Disconnect shall, electrically
and mechanically connect permanently to a
prestripped end of a stranded copper wire and, have a
flat rectangular tongue portion for mating to a Female
Quick Disconnect in a separable, reusable manner,
forming a Quick Connect Wiring Connection.
The connector line shall offer tongue variations (size
0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA
DC-2) and barrel variations in wire size 22-18 AWG,
16-14 AWG, 12-10 AWG and construction non-
insulated, vinyl insulated, nylon fully insulated, etc.
The Nylon Fully Insulated Male Quick Disconnect
shall have regulatory agency coverage (UL Listing,
CSA Certification). The tongue shall be marked with
the wire range and the manufacturer’s symbol. (á)
The Nylon Fully Insulated Male Quick Disconnect
with Insulation Grip shall be tin plated 0.020˝ thick
copper, with a 0.187˝ blade conforming to
ANSI/NEMA DC-2 dimensions and a 0.24˝ long
barrel with a tin plated brass insulation grip covered
by a molded nylon funnel entry sleeve which extends
to cover the tongue, color coded, and sized for a
specified (AWG) wire range (22-18, 16-14).
Insulated connectors shall be UL Listed and CSA
Certified for 600 volts maximum, building wire: 1000
volts maximum, signs and fixtures (luminaires). The
connector shall be temperature rated 221˚F (105˚C)
maximum.
Quick Disconnect connectors shall be suitable for field
or factory wiring, with a UL Recognized strain relief
required.
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
