Dual Wall Tubing (Adhesive & Encapsulant-Lined)
3-39
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
Heat-Shrinkable Tubing
3
ES2000
Applications
Specially designed for
environmental sealing and
electrical insulation of wire
splices, terminations, and
components.
Installation
Minimum shrink
temperature: 110°C [230°F]
Minimum full recovery
temperature: 135°C [275°F]
Series UL Raychem
ES2000 E85381 RT-1112
600 V, 125°C
Flame-Retardant, High-
Shrink-Ratio, Adhesive-
Lined Semirigid Polyolefin
Tubing
Product Facts
n4:1 shrink ratio allows a few
sizes to cover a wide range
of splice and component
diameters
nFlame-retardant and
mechanically tough, the
tubing provides strain relief
and abrasion protection of
wire splices, terminals, and
other components
nThick adhesive liner forms
an effective barrier against
fluids and moisture and
performs well at an
extended temperature range
nUL recognized
Specifications/Approvals
Operating Temperature Range
-40°Cto 130°C
[-40°F to 266°F]
Available in: Americas Europe Asia Pacific
nn
Dual Wall Tubing (Adhesive & Encapsulant-Lined)
3-40 Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
ES2000 (Continued)
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging Cut pieces.
Marking Tubing will be printed with its numbered size (such as ES-1, ES-2, ES-3, or ES-4).
Ordering description Specify product name, numbered size, color,and cut length
(for example, ES2000-NO.2-0-50MM).
Inside Diameter (Including Core) Recovered Wall Thickness*
Part Minimum Maximum Minimum Minimum Minimum
Number Expanded Recovered Total Wall Jacket Wall Adhesive Wall
asSupplied After Heating After Heating After Heating After Heating
ES2000-No.1 5.72 [0.225] 1.27 [0.050] 1.20 [0.047] 0.64 [0.025] 0.56 [0.022]
ES2000-No.2 7.44 [0.293] 1.65 [0.065] 1.52 [0.060] 0.76 [0.030] 0.76 [0.030]
ES2000-No.3 10.85 [0.427] 2.41 [0.095] 1.91 [0.075] 0.89 [0.035] 1.02 [0.040]
ES2000-No.4 17.78 [0.700] 4.45 [0.175] 2.41 [0.095] 1.04 [0.041] 1.37 [0.054]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Product Dimensions
Ordering Information
