
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering inform at io n call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 20 to 26 Pos. 14520-EZDB-XXX-0EC
Physical
Electrical
Environmental
"RoHS compliant" mea ns that the product or part does not contain any of the following substances in exce ss of the following maximum con centration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated bi phenyls or prolybromiant ed diphenyl ethers; or (b) 0.01% (by weight ) for cadmium. Unless other wise stated b y 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
″Vesa″ is a trademark of Video Electronics Standards Association Corporation.
Connector Contact Plating
Wiping Area: 30 µ" [0.76µm] Min. Gold
Shell
Color: Beige
Material: Acrylo nitril e Butadiene Styrene (ABS)
Cable
Color: Beige
Jacket Material: Polyvinyl Chlorid e (PVC )
Flammability: AWM VW-1
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: > 1 × 108Ω at 100 VDC
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10Ω
Conductor Size: 28 AWG Stranded
Propogation Ve locity: 1.25 ns/ft [4.1 ns/m ]
Temperature Rating: -20°C to +75°C
TS-0883-10
Sheet 1 of 3
• Supports VESA™ DFP standard for 20 position
MDR at host and DISM standard for 26
position at LCD monitor
• Signal protection with each differential twin-ax
pair has a foil shield and drain wire
• Entire cable bundle is shielded with foil and
braid for additional signal protection
• Rugged MDR ribbon type contact
• Quick release latches
• RoHS* compliant
Date Modified: May 22, 2006
UL File No.: E86982