CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 240* VDC or 440 VAC
UL, CUR Rating: 10 A at 250 VAC resistive [1]
8 A at 30 VDC/250 VAC [1]
8 A at 30 VDC/250 VAC,
100k cycles [2]
B300 Pilot Duty [1]
R300 Pilot Duty [1]
1/4 HP at 125 VAC [1]
1/2 HP at 250 VAC [1]
VDE Rating: 8 A at 250 VAC
*Note: if switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material Silver cadmium oxide (AgCdO) [1]
Silver tin oxide (AgSnO2) [2]
Gold plating available
Resistance < 100 milliohms initially
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 10 million
Electrical 3 X 105 at 8 A 240 VAC res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 100°C (212°F)
Storage -40°C (-40°F) to 130°C (266°F) Class B
-40°C (-40°F) to 155°C (311°F) Class F
Vibration Break Contact: 5g at 10...500 Hz
Make Contact: 20g at 10...500 Hz
Shock 10 g
Enclosure P.B.T. polyester, UL94 V-0
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 8 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Class F version not VDE approved
COIL
Power
At Pickup Voltage 120 mW
(typical)
Max. Continuous 1.2 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 20°C (36°F) at nominal coil voltage
Temperature Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
AZ6961
2/17/05W
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
•High sensitivity, 120 mW pickup
•Dielectric strength 5000 Vrms
•Isolation spacing greater than 8 mm
•10 Amp switching capability
•Class B insulation standard, Class F version available
•Epoxy sealed version for automatic wave soldering and
cleaning available
•UL, CUR file E44211
•VDE 131637ÜG