PRELIMINARY PRODUCT INFORMATION GaAs INTEGRATED CIRCUIT uPG2158T5K L,S-BAND SPDT SWITCH DESCRIPTION The uPG2158T5K is a GaAs MMIC for L,S-band SPDT Single Pole Double Throw which were designed for mobile phone and the another L,S-band applications. This device can operate frequency from 0.05GHz to 3.0GHz,, having the low insertion loss and high isolation. This device is housed in a 6-pin TSON Thin Small Out-line Non-Leaded package. And this package is able to high-density surface mounting. FEATURES Switch Control Voltage Low Insertion Loss High Isolation Handling Power High-density surface mounting : Vcont H = 1.8 to 5.3V 2.7V TYP. : Vcont L = -0.2 to 0.2V 0V TYP. : Lins1 = 0.40dB TYP.@ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins2 = 0.40dB TYP.@ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins3 = 0.45dB TYP.@ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins4 = 0.47dB TYP.@ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins5 = 0.53dB TYP.@ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL1 = 27dB TYP. @ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL2 = 27dB TYP. @ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL3 = 19dB TYP. @ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL4 = 17dB TYP. @ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL5 = 17dB TYP. @ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Pin 1dB = +30.5.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Pin 0.1dB = +29.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : 6-pin TSON package 1.0 1.0 0.4 mm APPLICATION L,S-band digital cellular or cordless telephone W-LAN, WLL and BluetoothTM etc. ORDERING INFORMATION Part Number uPG2158T5K-E2-A Package Marking Supplying Form 6-pin TSON 1010 G2 TBD Remark To order evaluation samples, contact your nearby sales office. Part number for sample order : uPG2158T5K Caution Electro-static sensitive devices The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Document No. PG*****EJW2V0PM ( 2nd edition ) Date Published April 2005 CP(K) uPG2158T5K PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Top View 1 G2 2 3 Top View Bottom View 6 1 6 6 1 5 2 5 5 2 4 3 4 4 3 SW TRUTH TABLE Vcont1 Vcont2 INPUT-OUTPUT1 INPUT-OUTPUT2 Low High OFF ON High Low ON OFF ASOLUTE MAXIMUM RATINGS Unless otherwise specified, TA = +25 Parameter Symbol Ratings Unit Vcont +6.0Note V Input Power Pin +31 dBm Operating Ambient Temperature TA -45 to +85 Storage Temperature Tstg -55 to +150 Switch Control Voltage Note Vcont1 - Vcont2 6.0V RECOMMENDED OPERATING RANGE Parameter 2 Symbol Unless otherwise specified, TA = +25 MIN. TYP. MAX. Unit Switch Control Voltage H Vcont H 1.8 2.7 5.3 V Switch Control Voltage L Vcont L -0.2 0 0.2 V Preliminary Product Information Pin No. Pin Name 1 OUTPUT1 2 GND 3 OUTPUT2 4 Vcont2 5 INPUT 6 Vcont1 uPG2158T5K ELECTRICAL CHARACTERISTICS TA = +25 , Vcont(H) = 2.7V, Vcont(L) = 0V,DC cut capacitors = 56pF,Unless otherwise specified Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Insertion Loss1 Lins1 f = 0.05 to 0.5GHzNote1 - 0.40 0.45 dB Insertion Loss2 Lins2 f = 0.5 to 1.0GHz - 0.40 0.45 dB Insertion Loss3 Lins3 f = 1.0 to 2.0GHz - 0.45 0.50 dB Insertion Loss4 Lins4 f = 2.0 to 2.5GHz - 0.47 0.55 dB Insertion Loss5 Lins5 f = 2.5 to 3.0GHz - 0.53 0.60 dB 23 27 - dB 0.5GHzNote1 Isolation1 ISL1 f = 0.05 to Isolation2 ISL2 f = 0.5 to 1.0GHz 23 27 - dB Isolation3 ISL3 f = 1.0 to 2.0GHz 16 19 - dB Isolation4 ISL4 f = 2.0 to 2.5GHz 14 17 - dB Isolation5 ISL5 f = 2.5 to 3.0GHz 14 17 - dB Input Return Loss1 RLin1 f = 0.05 to 0.5GHzNote1 15 20 - dB Input Return Loss2 RLin2 f = 0.5 to 3.0GHz 15 20 - dB Output Return Loss1 RLout1 f = 0.05 to 0.5GHzNote1 15 20 - dB Output Return Loss2 RLout2 f = 0.5 to 3.0GHz 15 20 - dB f = 2.0GHz/2.5GHz +26.0 +29.0 - dBm f = 0.5 TO 3.0GHz - +29.0 - dBm f = 0.5 to 3.0GHz - +30.5 - dBm 0.1dB Loss Compression Input PowerNote2 Pin 1dB Loss Compression Input PowerNote3 Pin 0.1dB 1dB 2nd Harmonics 2f0 f = 2.0GHz/2.5GHz, Pin=+20dBm 65 75 - dBc 3rd Harmonics 3f0 f = 2.0GHz/2.5GHz, Pin=+20dBm 65 75 - dBc Input Intercept Point IIP3 f = 0.5 to 3.0GHz, 2tone 5MHz spacing - +60 - dBm Switch Control Current Icont - 0.2 20 uA Switch Control Speed tSW - 50 500 ns 50 CTL to 90/10 Note1. DC cut capacitors = 1000pF 0.05 to 0.5GHz Note2. Pin 0.1dB is measured the input power level when the insertion loss increases more 0.1dB than that of linear range. Note3. Pin 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range. Preliminary Product Information 3 uPG2158T5K ELECTRICAL CHARACTERISTICS TA = +25 , Vcont(H) = 1.8V, Vcont(L) = 0V,DC cut capacitors = 56pF,Unless otherwise specified Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Insertion Loss6 Lins6 f = 0.05 to 0.5GHzNote1 - 0.40 0.46 dB Insertion Loss7 Lins7 f = 0.5 to 1.0GHz - 0.40 0.47 dB Insertion Loss8 Lins8 f = 1.0 to 2.0GHz - 0.46 0.52 dB Insertion Loss9 Lins9 f = 2.0 to 2.5GHz - 0.48 0.57 dB Insertion Loss10 Lins10 f = 2.5 to 3.0GHz - 0.54 0.62 dB 23 27 - dB 0.5GHzNote1 Isolation6 ISL6 f = 0.05 to Isolation7 ISL7 f = 0.5 to 1.0GHz 23 27 - dB Isolation8 ISL8 f = 1.0 to 2.0GHz 16 19 - dB Isolation9 ISL9 f = 2.0 to 2.5GHz 14 17 - dB Isolation10 ISL10 f = 2.5 to 3.0GHz 14 17 - dB Input Return Loss1 RLin1 f = 0.05 to 0.5GHzNote1 15 20 - dB Input Return Loss2 RLin2 f = 0.5 to 3.0GHz 15 20 - dB Output Return Loss1 RLout1 f = 0.05 to 0.5GHzNote1 15 20 - dB Output Return Loss2 RLout2 f = 0.5 to 3.0GHz 15 20 - dB f = 2.0GHz/2.5GHz +19.0 +22.0 - dBm f = 0.5 TO 3.0GHz - +22.0 - dBm f = 0.5 to 3.0GHz - +25.0 - dBm - 0.2 20 uA - 50 500 ns 0.1dB Loss Compression Input PowerNote2 Pin 1dB Loss Compression Input PowerNote3 Pin 0.1dB 1dB Switch Control Current Icont Switch Control Speed tSW 50 CTL to 90/10 Note1. DC cut capacitors = 1000pF 0.05 to 0.5GHz Note2. Pin 0.1dB is measured the input power level when the insertion loss increases more 0.1dB than that of linear range. Note3. Pin 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range. 4 Preliminary Product Information uPG2158T5K EVALUATION CIRCUIT Vcont1 INPUT Vcont2 C0 1000pF 1000pF 6 4 5 C0 : f = 0.05 to 0.5GHz 1000pF f = 0.5 to 3.0GHz 56pF 1 2 C0 3 C0 OUTPUT1 OUTPUT2 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Preliminary Product Information 5 uPG2158T5K PACKAGE DIMENSIONS 0.15 +0.07 -0.05 0.45 0.1 0.35 0.06 0.35 0.06 1.0 0.1 6 Preliminary Product Information 0.175 0.075 0.13 0.07 0.23 0.07 0.15 1.0 0.1 +0.07 -0.05 0.37 -0.05 +0.03 6-PIN TSON UNIT: mm uPG2158T5K RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature package surface temperature Time at peak temperature Time at temperature of 220 or higher Preheating time at 120 to 180 Maximum number of reflow processes Maximum chlorine content of rosin flux mass : 260 or below : 10 seconds or less : 60 seconds or less : 120 30 seconds : 3 times : 0.2 Wt. or below IR260 VPS Peak temperature package surface temperature Time at temperature of 200 or higher Preheating time at 120 to 150 Maximum number of reflow processes Maximum chlorine content of rosin flux mass : 215 or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2 Wt. or below VP215 Wave soldering Peak temperature molten solder temperature Time at peak temperature Preheating temperature package surface temperature Maximum number of reflow processes Maximum chlorine content of rosin flux mass : 260 or below : 10 seconds or less : 120 or below : 1 time : 0.2 Wt. or below WS260 Partial Heating Peak temperature pin temperature Soldering time per side of device Maximum chlorine content of rosin flux : 350 or below : 3 seconds or less : 0.2 Wt. or below HS350 Caution Do not use different soldering methods together mass except for partial heating . Preliminary Product Information 7 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.