GaAs INTEGRATED CIRCUIT
uPG2158T5K
L,S-BAND SPDT SWITCH
DESCRIPTION
The uPG2158T5K is a GaAs MMIC for L,S-band SPDT Single Pole Double Throw which were designed for mobile
phone and the another L,S-band applications.
This device can operate frequency from 0.05GHz to 3.0GHz,, having the low insertion loss and high isolation.
This device is housed in a 6-pin TSON Thin Small Out-line Non-Leaded package. And this package is able to high-density
surface mounting.
FEATURES
･Switch Control Voltage : Vcont H = 1.8 to 5.3V 2.7V TYP.
: Vcont L = -0.2 to 0.2V 0V TYP.
･Low Insertion Loss : Lins1 = 0.40dB TYP.@ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins2 = 0.40dB TYP.@ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins3 = 0.45dB TYP.@ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins4 = 0.47dB TYP.@ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins5 = 0.53dB TYP.@ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
･High Isolation : ISL1 = 27dB TYP. @ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL2 = 27dB TYP. @ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL3 = 19dB TYP. @ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL4 = 17dB TYP. @ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL5 = 17dB TYP. @ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
･Handling Power : Pin 1dB = +30.5.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Pin 0.1dB = +29.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
･High-density surface mounting : 6-pin TSON package 1.0 1.0 0.4 mm
APPLICATION
･L,S-band digital cellular or cordless telephone
･W-LAN, WLL and BluetoothTM etc.
TBD G26-pin TSON 1010uPG2158T5K-E2-A
Supplying FormMarkingPackagePart Number
ORDERING INFORMATION
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order : uPG2158T5K
Document No. PG*****EJW2V0PM ( 2nd edition )
Date Published April 2005 CP(K)
PRELIMINARY PRODUCT INFORMATION
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please confirm
that this is the latest version.
uPG2158T5K
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
OUTPUT11
GND2
OUTPUT23
Vcont24
INPUT5
Vcont16
Pin NamePin No.
ASOLUTE MAXIMUM RATINGS Unless otherwise specified, TA= +25
V+6.0Note
VcontSwitch Control Voltage
-55 to +150TstgStorage Temperature
-45 to +85TAOperating Ambient Temperature
dBm+31PinInput Power
UnitRatingsSymbolParameter
Note Vcont1 – Vcont2 6.0V
2 Preliminary Product Information
SW TRUTH TABLE
INPUT-OUTPUT2INPUT-OUTPUT1Vcont2Vcont1
OFFONLowHigh
ONOFFHighLow
RECOMMENDED OPERATING RANGE Unless otherwise specified, TA= +25
V0.20-0.2Vcont LSwitch Control Voltage L
V5.32.71.8Vcont HSwitch Control Voltage H
UnitMAX.TYP.MIN.SymbolParameter
Top View Top View Bottom View
1
3
2
4
5
61
3
2
4
5
61
3
2
4
5
6
G2
Preliminary Product Information 3
uPG2158T5K
ELECTRICAL CHARACTERISTICS
TA= +25 , Vcont(H) = 2.7V, Vcont(L) = 0V,DC cut capacitors = 56pF,Unless otherwise specified
dBm-+60-f = 0.5 to 3.0GHz, 2tone
5MHz spacing
IIP3Input Intercept Point
dB-2015f = 0.5 to 3.0GHzRLout2Output Return Loss2
dB-2015f = 0.5 to 3.0GHzRLin2Input Return Loss2
dB-1714f = 2.5 to 3.0GHzISL5Isolation5
dB0.600.53-f = 2.5 to 3.0GHzLins5Insertion Loss5
dBc-7565f = 2.0GHz/2.5GHz,
Pin=+20dBm
3f03rd Harmonics
dBm-+29.0+26.0f = 2.0GHz/2.5GHz
dBc-7565f = 2.0GHz/2.5GHz,
Pin=+20dBm
2f02nd Harmonics
dB-1714f = 2.0 to 2.5GHzISL4Isolation4
dB0.550.47-f = 2.0 to 2.5GHzLins4Insertion Loss4
uA200.2-IcontSwitch Control Current
dBm-+30.5-f = 0.5 to 3.0GHzPin 1dB1dB Loss Compression
Input PowerNote3
dB-1916f = 1.0 to 2.0GHzISL3Isolation3
dB-2723f = 0.5 to 1.0GHzISL2Isolation2
dB0.500.45-f = 1.0 to 2.0GHzLins3Insertion Loss3
ns50050-50 CTL to 90/10tSWSwitch Control Speed
dB-2015f = 0.05 to 0.5GHzNote1
RLout1Output Return Loss1
dB-2015f = 0.05 to 0.5GHzNote1
RLin1Input Return Loss1
dBm-+29.0-f = 0.5 TO 3.0GHz
Pin 0.1dB0.1dB Loss Compression
Input PowerNote2
dB-2723f = 0.05 to 0.5GHzNote1
ISL1Isolation1
dB0.450.40-f = 0.5 to 1.0GHzLins2Insertion Loss2
dB0.450.40-f = 0.05 to 0.5GHzNote1
Lins1Insertion Loss1
UnitMAX.TYP.MIN.Test ConditionsSymbolParameter
Note1. DC cut capacitors = 1000pF 0.05 to 0.5GHz
Note2. Pin 0.1dB is measured the input power level when the insertion loss increases more 0.1dB than that of linear range.
Note3. Pin 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range.
4Preliminary Product Information
uPG2158T5K
ELECTRICAL CHARACTERISTICS
TA= +25 , Vcont(H) = 1.8V, Vcont(L) = 0V,DC cut capacitors = 56pF,Unless otherwise specified
dB-2015f = 0.5 to 3.0GHzRLout2Output Return Loss2
dB-2015f = 0.5 to 3.0GHzRLin2Input Return Loss2
dB-1714f = 2.5 to 3.0GHzISL10Isolation10
dB0.620.54-f = 2.5 to 3.0GHzLins10Insertion Loss10
dBm-+22.0+19.0f = 2.0GHz/2.5GHz
dB-1714f = 2.0 to 2.5GHzISL9Isolation9
dB0.570.48-f = 2.0 to 2.5GHzLins9Insertion Loss9
uA200.2-IcontSwitch Control Current
dBm-+25.0-f = 0.5 to 3.0GHzPin 1dB1dB Loss Compression
Input PowerNote3
dB-1916f = 1.0 to 2.0GHzISL8Isolation8
dB-2723f = 0.5 to 1.0GHzISL7Isolation7
dB0.520.46-f = 1.0 to 2.0GHzLins8Insertion Loss8
ns50050-50 CTL to 90/10tSWSwitch Control Speed
dB-2015f = 0.05 to 0.5GHzNote1
RLout1Output Return Loss1
dB-2015f = 0.05 to 0.5GHzNote1
RLin1Input Return Loss1
dBm-+22.0-f = 0.5 TO 3.0GHz
Pin 0.1dB0.1dB Loss Compression
Input PowerNote2
dB-2723f = 0.05 to 0.5GHzNote1
ISL6Isolation6
dB0.470.40-f = 0.5 to 1.0GHzLins7Insertion Loss7
dB0.460.40-f = 0.05 to 0.5GHzNote1
Lins6Insertion Loss6
UnitMAX.TYP.MIN.Test ConditionsSymbolParameter
Note1. DC cut capacitors = 1000pF 0.05 to 0.5GHz
Note2. Pin 0.1dB is measured the input power level when the insertion loss increases more 0.1dB than that of linear range.
Note3. Pin 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range.
Preliminary Product Information 5
uPG2158T5K
EVALUATION CIRCUIT
The application circuits and their parameters are for reference only and are not intended for use in actual
design-ins.
C0 : f = 0.05 to 0.5GHz 1000pF
f = 0.5 to 3.0GHz 56pF
1 32
4
56
C0
1000pF
1000pF
C0 C0
OUTPUT1 OUTPUT2
Vcont2
INPUTVcont1
PACKAGE DIMENSIONS
6Preliminary Product Information
6-PIN TSON UNIT: mm
uPG2158T5K
0.35 0.06 0.35 0.06
0.175 0.075
1.0 0.1
0.37
1.0 0.1
+0.03
-0.05
0.45 0.1
0.15 +0.07
-0.05
0.15 +0.07
-0.05
0.23 0.07
0.13 0.07
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Preliminary Product Information 7
HS350Peak temperature pin temperature : 350 or below
Soldering time per side of device : 3 seconds or less
Maximum chlorine content of rosin flux mass : 0.2 Wt. or below
Partial Heating
WS260Peak temperature molten solder temperature : 260 or below
Time at peak temperature : 10 seconds or less
Preheating temperature package surface temperature : 120 or below
Maximum number of reflow processes : 1 time
Maximum chlorine content of rosin flux mass : 0.2 Wt. or below
Wave soldering
VP215Peak temperature package surface temperature : 215 or below
Time at temperature of 200 or higher : 25 to 40 seconds
Preheating time at 120 to 150 : 30 to 60 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux mass : 0.2 Wt. or below
VPS
IR260Peak temperature package surface temperature : 260 or below
Time at peak temperature : 10 seconds or less
Time at temperature of 220 or higher : 60 seconds or less
Preheating time at 120 to 180 : 120 30 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux mass : 0.2 Wt. or below
Infrared Reflow
Condition SymbolSoldering ConditionsSoldering Method
Caution Do not use different soldering methods together except for partial heating .
uPG2158T5K
4590 P a t r ick Hen r y Drive
San t a C l ara, CA 9505 4- 181 7
Teleph o n e : ( 408) 919- 25 00
Facsim ile:
(
408
)
988- 027 9
Subject: Compliance with EU Dire ctives
CEL certifies, to its kno w ledge, that semicondu ctor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electron ic equipment (RoHS) an d the requir e ments of EU Directive
2003/11/EC Restriction o n Penta and Octa BDE.
CEL Pb-free products ha ve the same base part n u mber with a suffix added. The suffix –A indicates
that the device is Pb-fre e. The –AZ suffix is use d to designa te devices containing Pb which are
exempted from the requirement of Ro HS directive (*). In all cases the de vices have Pb-free terminals.
All devices with these suffixes meet the require ments of the RoHS directive.
This statu s is based on CEL’s understanding of t he EU Directives and kn owledge of the materials that
go into its pr oducts as of the date of disclo s ure o f this inform ation.
Re st rict e d S u bst a n c e
per RoHS Con c e n tratio n Limit per RoHS
(value s are n o t yet fixed) Con c e n tratio n contai ned
in CEL devices
- A - A Z
Lead (P b) < 100 0 PPM Not Dete cted (*)
Mercury < 100 0 PPM Not Dete cted
Cadmi u m < 100 PPM Not Dete cted
Hexavale nt Chromi um < 100 0 PPM Not Dete cted
PBB < 1000 PPM Not Detec t ed
PBDE < 1000 PPM Not Detec t ed
If you should have any additional q uestions reg a rding our d e vices and compliance t o environme n tal
standards, p l ease do not hesitate to contact your local representative.
Important Inf o rm ation and Disclaimer: Infor m ation provided b y CEL on its w ebsite or in other communi cations concertin g the subs tance
content of its pro ducts represents know ledge and b e lief as of t he date that it is provided. CEL bases its know ledge a n d belief on informa t ion
provided b y t h ird parties and make s no representa t ion or w a rran t y a s to the accurac y of such information. Efforts are u nder w a y to b e tte r
integrate informa t ion from third pa rties. CEL has ta ken and cont inue s to take reasona ble steps to provide repr esentative and ac cur a te
information but ma y not h a ve conducted destructive testing or chemical analy s is on incoming ma terials and chemicals. CEL and CE L
suppliers consid er certain inform ation to be pro p ri etar y , and thus C AS numbers and other limited information ma y not be availab le for
release.
In no event shall CEL’s liability ari s ing out of such information e x cee d the total purch ase price of the CEL part ( s) at issue s old by CEL to
customer on an annual basis.
See CEL Te rms and Conditions f o r additional cl arification of w a rran t ies and liability .
