TM241CE24T Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications controller M241 24 IO transistor PNP Ethernet Main Range of product Modicon M241 Product or component type Logic controller [Us] rated supply voltage 24 V DC Discrete input number 14 discrete input including 8 fast input conforming to IEC 61131-2 Type 1 Discrete output type Transistor Discrete output number 10 transistor including 4 fast output Discrete output voltage 24 V DC for transistor output Discrete output current 0.5 A with Q0...Q9 terminal(s) for transistor output 0.1 A with Q0...Q3 terminal(s) for fast output (PTO mode) Complementary Discrete I/O number 24 Number of I/O expansion module 7 (local I/O architecture) 14 (remote I/O architecture) Supply voltage limits 20.4...28.8 V Inrush current 50 A Power consumption in W 32.6...40.4 W with max number of I/O expansion module Discrete input logic Sink or source Discrete input voltage 24 V Discrete input voltage type DC Voltage state 1 guaranteed >= 15 V for input Voltage state 0 guaranteed <= 5 V for input Discrete input current 5 mA for input 10.7 mA for fast input Input impedance 4.7 kOhm for input 2.81 kOhm for fast input Response time 50 s turn-on operation with I0...I13 terminal(s) for input 50 s turn-off operation with I0...I13 terminal(s) for input <= 2 s turn-on operation with I0...I7 terminal(s) for fast input <= 2 s turn-off operation with I0...I7 terminal(s) for fast input <= 34 s turn-on operation with Q0...Q9 terminal(s) for output Dec 15, 2018 1 <= 250 s turn-off operation with Q0...Q9 terminal(s) for output <= 2 s turn-on operation with Q0...Q3 terminal(s) for fast output <= 2 s turn-off operation with Q0...Q3 terminal(s) for fast output Configurable filtering time 1 s for fast input 12 ms for fast input 0 ms for input 1 ms for input 4 ms for input 12 ms for input Discrete output logic Positive logic (source) Output voltage limits 30 V DC Current per output common <= 2 A with Q0...Q3 terminal for fast output <= 2 A with Q4...Q7 terminal for output <= 1 A with Q8...Q9 terminal for output Output frequency <= 20 kHz for fast output (PWM mode) <= 100 kHz for fast output (PLS mode) <= 1 kHz for output Accuracy +/- 0.1 % at 0.02...0.1 kHz for fast output +/- 1 % at 0.1...1 kHz for fast output Leakage current <= 5 A for output Voltage drop <= 1 V Tungsten load <= 2.4 W Protection type Short-circuit and overload protection with automatic reset Reverse polarity protection for fast output Short-circuit protection Reset time 10 ms automatic reset output 12 s automatic reset fast output Memory capacity 8 MB for program 64 MB for system memory RAM Data backed up 128 MB built-in flash memory for backup of user programs Data storage equipment <= 16 GB SD card optional Battery type BR2032 lithium non-rechargeable, battery life: 4 yr Backup time 2 years at 25 C Execution time for 1 KInstruction 0.3 ms for event and periodic task 0.7 ms for other instruction Application structure 8 event tasks 4 cyclic master tasks 3 cyclic master tasks + 1 freewheeling task 8 external event tasks Realtime clock With Clock drift <= 60 s/month at 25 C Positioning functions PTO function 4 channel(s) (positioning frequency: 100 kHz) PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) Counting input number 4 fast input (HSC mode) at 200 kHz 14 standard input at 1 kHz Control signal type A/B signal at 100 kHz for fast input (HSC mode) Pulse/Direction signal at 200 kHz for fast input (HSC mode) Single phase signal at 200 kHz for fast input (HSC mode) Integrated connection type USB port with connector mini B USB 2.0 Ethernet with connector RJ45 Non isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485 Non isolated serial link "serial 2" with connector removable screw terminal block and interface RS485 Supply Serial link supply "serial 1" at 5 V, <= 200 mA Transmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS232 480 Mbit/s for bus length of 3 m - communication protocol: USB 10/100 Mbit/s - communication protocol: Ethernet Communication port protocol Modbus non isolated serial link with master/slave method Port Ethernet 1 - 10BASE-T/100BASE-TX port with copper cable support Communication service FDR Downloading IEC VAR ACCESS Monitoring 2 NGVL Programming Updating firmware SMS notifications DHCP server (via TM4 Ethernet switch network module) DHCP client (embedded Ethernet port) SNMP client/server FTP client/server SQL client Modbus TCP client I/O scanner Ethernet/IP originator I/O scanner (embedded Ethernet port) Ethernet/IP target, Modbus TCP server and Modbus TCP slave Send and receive email from the controller based on TCP/UDP library Web server (WebVisu & XWeb system) OPC UA server DNS client Local signalling 1 LED green for SD card access (SD) 1 LED red for BAT 1 LED green for SL1 1 LED green for SL2 1 LED per channel green for I/O state 1 LED red for I/O error (I/O) 1 LED red for bus fault on TM4 (TM4) 1 LED green for Ethernet port activity 1 LED red for module error (ERR) 1 LED green for PWR 1 LED green for RUN Electrical connection Removable screw terminal block for inputs and outputs (pitch 5.08 mm) Removable screw terminal block for connecting the 24 V DC power supply (pitch 5.08 mm) Cable distance between devices Unshielded cable: <= 50 m for input Shielded cable: <= 10 m for fast input Unshielded cable: <= 50 m for output Shielded cable: <= 3 m for fast output Insulation 500 V AC between fast input and internal logic Non-insulated between inputs 500 V AC between output and internal logic 500 V AC between fast output and internal logic Non-insulated between outputs 500 V AC between input and internal logic 500 V AC between output groups 500 V AC between supply and internal logic Non-insulated between supply and ground Marking CE Surge withstand 1 kV for power lines (DC) in common mode conforming to EN/IEC 61000-4-5 1 kV for shielded cable in common mode conforming to EN/IEC 61000-4-5 0.5 kV for power lines (DC) in differential mode conforming to EN/IEC 61000-4-5 1 kV for relay output in differential mode conforming to EN/IEC 61000-4-5 1 kV for input in common mode conforming to EN/IEC 61000-4-5 1 kV for transistor output in common mode conforming to EN/IEC 61000-4-5 Web services Web server Maximum number of connections 8 connection(s) for Modbus server 8 connection(s) for SoMachine protocol 10 connection(s) for web server 4 connection(s) for FTP server 16 connection(s) for Ethernet/IP target 8 connection(s) for Modbus client Number of slave 16 Ethernet/IP 64 Modbus TCP Cycle time 10 ms 16 Ethernet/IP 64 ms 64 Modbus TCP Mounting support Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 Plate or panel with fixing kit Height 90 mm Depth 95 mm Width 150 mm Product weight 0.53 kg 3 Environment Standards CSA C22.2 No 142 ANSI/ISA 12-12-01 UL 1604 CSA C22.2 No 213 EN/IEC 61131-2 : 2007 Marine specification (LR, ABS, DNV, GL) UL 508 Product certifications CSA cULus IACS E10 RCM Resistance to electrostatic discharge 4 kV on contact conforming to EN/IEC 61000-4-2 8 kV in air conforming to EN/IEC 61000-4-2 Resistance to electromagnetic fields 10 V/m (80 MHz...1 GHz) conforming to EN/IEC 61000-4-3 3 V/m (1.4 GHz...2 GHz) conforming to EN/IEC 61000-4-3 1 V/m (2 GHz...3 GHz) conforming to EN/IEC 61000-4-3 Resistance to fast transients 2 kV for power lines conforming to EN/IEC 61000-4-4 1 kV for Ethernet line conforming to EN/IEC 61000-4-4 1 kV for serial link conforming to EN/IEC 61000-4-4 1 kV for input conforming to EN/IEC 61000-4-4 1 kV for transistor output conforming to EN/IEC 61000-4-4 Resistance to conducted disturbances 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6 3 V (0.1...80 MHz) conforming to Marine specification (LR, ABS, DNV, GL) 10 V (spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz)) conforming to Marine specification (LR, ABS, DNV, GL) Electromagnetic emission Conducted emissions, test level: 120...69 dBV/m QP, condition of test: power lines (radio frequency: 10...150 kHz) conforming to EN/IEC 55011 Conducted emissions, test level: 63 dBV/m QP, condition of test: power lines (radio frequency: 1.5...30 MHz) conforming to EN/IEC 55011 Radiated emissions, test level: 40 dBV/m QP with class A (radio frequency: 30...230 MHz) conforming to EN/IEC 55011 Conducted emissions, test level: 79...63 dBV/m QP, condition of test: power lines (radio frequency: 150...1500 kHz) conforming to EN/IEC 55011 Radiated emissions, test level: 47 dBV/m QP with class A (radio frequency: 230...1000 MHz) conforming to EN/IEC 55011 Immunity to microbreaks 10 ms Ambient air temperature for operation -10...55 C for horizontal installation -10...50 C for vertical installation Ambient air temperature for storage -25...70 C Relative humidity 10...95 % without condensation in operation 10...95 % without condensation in storage IP degree of protection IP20 with protective cover in place Pollution degree 2 Operating altitude 0...2000 m Storage altitude 0...3000 m Vibration resistance 3.5 mm (vibration frequency: 5...8.4 Hz) on symmetrical rail 3 gn (vibration frequency: 8.4...150 Hz) on symmetrical rail 3.5 mm (vibration frequency: 5...8.4 Hz) on panel mounting 3 gn (vibration frequency: 8.4...150 Hz) on panel mounting Shock resistance 15 gn for 11 ms Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 1330 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference contains SVHC above the threshold - Go to CaP for more details Go to CaP for more details Product environmental profile Available Product end of life instructions Available Product environmental 4 End of life manual 5 Product data sheet Dimensions Drawings Dimensions 6 TM241CE24T Product data sheet Mounting and Clearance TM241CE24T Clearance 7 Product data sheet Mounting and Clearance TM241CE24T Mounting Position Acceptable Mounting NOTE: Expansion modules must be mounted above the logic controller. Incorrect Mounting 8 Product data sheet Mounting and Clearance TM241CE24T Direct Mounting On a Panel Surface Mounting Hole Layout 9 Product data sheet Connections and Schema TM241CE24T Digital Inputs Wiring Diagram (*) : (1) : (A) : (B) : Type T fuse The COM0, COM1 and COM2 terminals are not connected internally Sink wiring (positive logic) Source wiring (negative logic) Fast Input Wiring (I0...I7) 10 Product data sheet Connections and Schema TM241CE24T Fast Transistor Outputs Wiring Diagram (*) : 2 A fast-blow fuse 11 Product data sheet Connections and Schema TM241CE24T Transistor Outputs Wiring Diagram (*) : (1) : (2) : 12 Type T fuse The V1+ and V2+ terminals are not connected internally. The V1- and V2- terminals are not connected internally. Product data sheet Connections and Schema TM241CE24T USB Mini-B Connection 13 Product data sheet Connections and Schema Ethernet Connection to a PC 14 TM241CE24T