NEW 3 x 5mm Rectangular (R) OptopipeTM Optical Light Pipe, 4 Array (RJ45 Jack) FRONT PANEL 13.97 [.550] TYP 3 PLCS 2.54 [.100] MicroLED SMT LEDs for use with 515-1055 31.2 [1.23] REF 27.43 [1.08] 5.08 [.200] (4) PLACES DIFFUSED FRONT SURFACES 20.57 [.81] 3.05 [.120] (4) PLACES PART NO. 11.43 [.450] C.L. LED 1.91 [.075] 6.99 [.275] 27.94 [1.10] 1.50 [.059] TYP 3.99 [.157] TYP .99 [.039] TYP C.L. MOUNTING PIN #1 33.53 [1.32] 19.61 [.772] 5.64 [.222] 3.58 [.141] TYP] [O .113 .002] TYP 2 PLACES 27.94 .08 [1.100 .003] 13.97 [.550] DIRECTION OF LIGHT 8.33 [.328] 2.69 [.106] TYP RECOMMENDED SOLDER PAD /HOLES LAYOUT 515-1055 1.57 [.062] 7.62 [.300] NOTE: designed for post-reflow PC board insertion. Dimensions in mm [inches] Recommended 597-3xx1-1xx 597-77x1-1xx Alternatives 597-3xxx-4xx 597-3xx1-4xx 597-3xx1-5xx 597-5x11-4xx 597-5202-4xx PAGE # 2 1-19 1-20 1-27 & 1-28 1-28 1-30 1-27 1-27 LED alternatives may not produce optimum light output Solder Pad/Holes layout shown is for bi-color LEDs listed under "Recommended" category Contact factory for other layouts Features * * * * * * High transmissivity polycarbonate material UL94V-0 compliance ESD protection (circuit isolation from front panel) Wide viewing angle Arrays reduce insertion costs Secures to PCB by snap-fit LED Data For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. Operating/Storage Temperature -30C to +100C Dialight Optopipe Light Pipe Description This OptopipeTM functions as a through-the-case indicator by conducting the light over the top of connectors or switches with a maximum height of 0.550". It is equivalent to the 515-1022 and well suited to applications where vibration is a concern. This Optopipe'sTM four 3 x 5mm rectangular light emitting surfaces appear bright and are optically well isolated. The light pipe is reliably held in place by 2 snap-fit pins located next to the first and fourth light pipe elements. These pins positively lock onto 0.062" thick PCBs regardless of individual variations in thickness. A textured finish on the 4 light emitting surfaces maximizes the viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 type SMT LEDs. The LEDs are mounted in a straight line on a 0.550" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom OptopipeTM solutions for your applications. Dialight Corporation * 1501 Route 34 South * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 *www.dialight.com 2-27 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Dialight: 515-1055F