C.L. MOUNTING
C.L. LED
Dimensions in mm [inches]
MicroLED SMT LEDs
for use with 515-1055
PART NO. PAGE #
Recommended
597-3xx1-1xx 1-19
597-77x1-1xx 1-20
Alternatives
597-3xxx-4xx 1-27 & 1-28
597-3xx1-4xx 1-28
597-3xx1-5xx 1-30
597-5x11-4xx 1-27
597-5202-4xx 1-27
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for bi-color
LEDs listed under “Recommended” category
Contact factory for other layouts
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to PCB by snap-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This Optopipe™ functions as a through-the-case indicator by conducting the light over the top of connectors or
switches with a maximum height of 0.550". It is equivalent to the 515-1022 and well suited to applications where vibration
is a concern. This Optopipe’s™ four 3 x 5mm rectangular light emitting surfaces appear bright and are optically well
isolated. The light pipe is reliably held in place by 2 snap-fit pins located next to the first and fourth light pipe elements.
These pins positively lock onto 0.062" thick PCBs regardless of individual variations in thickness. A textured finish on the 4
light emitting surfaces maximizes the viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or
PLCC-4 type SMT LEDs. The LEDs are mounted in a straight line on a 0.550" pitch. The light pipe material is water clear
transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C
NOTE: designed for
post-reflow
PC board insertion.
NEW