LED PANEL MOUNT INDICATORS 507 SERIES CARTRIDGES FOR USE WITH HOLDERS & CLIPS PART NO.* COLOR VF 507-4762-3331-500 507-4862-3332-500 507-4962-3333-500 507-5062-3334-500 507-4757-3331-500 507-4857-3332-500 507-4957-3333-500 507-5064-3334-500 507-4759-3331-500 507-4859-3332-500 507-4959-3333-500 507-5066-3334-500 507-4760-3331-500 507-4860-3332-500 507-4960-3333-500 507-5067-3334-500 507-4761-3331-500 507-4861-3332-500 507-4961-3333-500 507-5068-3334-500 Red Green Yellow Blue Red Green Yellow Blue Red Green Yellow Blue Red Green Yellow Blue Red Green Yellow Blue 2 2.1 2.1 3 5 5 5 5 10 10 10 10 14 14 14 14 28 28 28 28 mA mcd FIG. 20 20 20 10 15 20 20 10 15 20 20 10 20 20 20 10 15 20 20 10 30 40 45 100 10 50 35 100 10 50 35 100 10 50 35 100 10 50 35 100 FIG. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 28.96 [1.140] 8.38 [.330] 6.73 [.265] 5.16 [.203] 7.14 [.280] FIG. 4 28.96 [1.140] 6.73 [.265] 5.16 [.203] + .51 [.020] Polarity: To facilitate proper installation of the cartridge, the cartridge is marked on the cartridge housing and the terminal base is keyed. *PART NUMBER ORDERING CODE 507 - xxxx - xx3x - 500 Series Lens Shape: 33 - Fig 3 = Cylindrical 37 - Fig 4 = Stovepipe mcd intensity of LED * Blue mcd rating with cylindrical cap is 100 mcd; stovepipe cap is 275 mcd 250 & 508 SERIES HOLDERS FOR 3/8" MOUNTING HOLE HOLDER WITHOUT COLLAR* 13.1 [.515] HOLDER WITH COLLAR* COLLAR FLANGE NUT FLANGE NUT *PART NUMBER ORDERING CODE 250 - xx38 - 14 - 504 508 - xx38 - 504 7.90 [.310] 5.00 [.197] 15.90 [.625] 29.70 [1.170] 7.10 [.280] 15.90 [.625] 29.70 [1.170] Series 5.00 [.197] Terminal Type: 87 = Turret Terminals 74 = Solder Blade (Not Shown) 75 = Solder Cups (Not Shown) 508-8738-504 Material & Finish: Housing, Cartridge and Holder - Black Anodized Aluminum. Cap -High Impact Plastic Terminals of holders marked A and B. A = Positive 515 SERIES CONNECTORS & SPEED CLIPS FOR 9/32" MOUNTING HOLE CARTRIDGE WITH SPEED CLIP & CONNECTOR 1.59 [.06] PANEL 30.02 [1.19] CONNECTOR 515-0012 15.88 [.625] 15.88 [.625] CONNECTOR 515-0074 13.89 [.547] 4.76 [.188] SPEED CLIP 515-0051 9.14 [.360] 6.86 [.270] 7.49 [.295] mcd intensity of LED Material & Finish: Housing, Cartridge and Holder - Black Anodized Aluminum. Cap -High Impact Plastic Dimensions in mm [inches] 12 Dialight Corporation * 1501 State Route 34 * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 * www.dialight.com Dialight