SFH600-0, SFH600-1, SFH600-2, SFH600-3, SFH600-4 SFH601-1, SFH601-2, SFH601-3, SFH601-4, SFH601-5 SFH609-1, SFH609-2, SFH609-3, SFH609-4, SFH609-5 OPTICALLY COUPLED ISOLATOR PHOTOTRANSISTOR OUTPUT APPROVALS l UL recognised, File No. E91231 'X' SPECIFICATION APPROVALS l VDE 0884 in 3 available lead forms : - STD - G form - SMD approved to CECC 00802 Excludes SFH609-4,-5 l Certified to EN60950 by the following Test Bodies :Nemko - Certificate No. P01102465 Fimko - Certificate No. FI18162 Semko - Reference No. 0202041/01-25 Demko - Certificate No. 311161-01 Excludes SFH600-0, 601-2, 609-4,-5 l BSI approved - Certificate No. 8001 Excludes SFH609-4,-5 DESCRIPTION The SFH600-, SFH601-, SFH609-_ series of optically coupled isolators consist of an infrared light emitting diode and a NPN silicon photo transistor in a standard 6 pin dual in line plastic package. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High BVCEO (70V, 90V, 100V min) l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l DC motor controllers l Industrial systems controllers l Measuring instruments l Signal transmission between systems of different potentials and impedances OPTION SM OPTION G SURFACE MOUNT 7.62 0.6 0.1 10.46 9.86 1.25 0.75 0.26 Dimensions in mm 2.54 7.0 6.0 1 2 6 5 3 4 1.2 7.62 6.62 7.62 4.0 3.0 13 Max 0.5 3.0 0.5 3.35 0.26 ABSOLUTE MAXIMUM RATINGS (25C unless otherwise specified) Storage Temperature -55C to + 150C Operating Temperature -55C to + 100C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260C INPUT DIODE Forward Current Reverse Voltage Power Dissipation OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO SFH600-0,1,2,3,4 SFH601-1,2,3,4,5 SFH609-1,2,3,4,5 Collector-base Voltage BVCBO SFH600-0,1,2,3,4 SFH601-1,2,3,4,5 SFH609-1,2,3,4,5 Emitter-collector Voltage BVECO Power Dissipation 60mA 6V 105mW 70V 100V 90V 70V 100V 90V 6V 160mW POWER DISSIPATION Total Power Dissipation 200mW (derate linearly 2.67mW/C above 25C) 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 7/3/03 DB92190m-AAS/A3 ELECTRICAL CHARACTERISTICS ( TA= 25C Unless otherwise noted ) PARAMETER Input MIN TYP MAX UNITS Forward Voltage (VF) 1.2 1.65 V IF = 60mA 10 A VR = 6V 70 100 90 V V V IC = 1mA ( Note 2 ) 70 100 90 6 V V V V nA IC = 100A % % % % % % % % % % V VRMS VPK 10mA IF , 5V VCE 10mA IF , 5V VCE 10mA IF , 5V VCE 10mA IF , 5V VCE 10mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 10mA IF , 2.5mA See note 1 See note 1 VIO = 500V (note 1) Reverse Current (IR) Output Collector-emitter Breakdown (BVCEO) SFH600-0, 1, 2, 3, 4 SFH601-1, 2, 3, 4, 5 SFH609-1, 2, 3, 4, 5 Collector-base Breakdown (BVCBO) SFH600-0, 1, 2, 3, 4 SFH601-1, 2, 3, 4, 5 SFH609-1, 2, 3, 4, 5 Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) Coupled Note 1 Note 2 TEST CONDITION 50 Current Transfer Ratio (CTR) (Note 2) SFH600-0, SFH601-1, SFH609-1 40 SFH600-1, SFH601-2, SFH609-2 63 SFH600-2, SFH601-3, SFH609-3 100 SFH600-3, SFH601-4, SFH609-4 160 SFH600-4, SFH601-5, SFH609-5 200 SFH600-0, SFH601-1, SFH609-1 13 SFH600-1, SFH601-2, SFH609-2 22 SFH600-2, SFH601-3, SFH609-3 34 SFH600-3, SFH601-4, SFH609-4 56 SFH600-4, SFH601-5, SFH609-5 68 Collector-emitter Saturation VoltageVCE(SAT) Input to Output Isolation Voltage VISO 5300 7500 Input-output Isolation Resistance RISO 5x1010 80 125 200 320 400 0.4 IE = 100A VCE = 10V Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. TYPICAL SWITCHING CHARACTERISTICS 1. Linear Operation (without saturation) Fig 1. IF = 10mA, VCC = 5V, RL = 75 2. Switching Operation (with saturation) Fig 2 VCC = 5V, RL = 1k UNITS Turn-on Time Rise Time Turn-off Time Fall Time Cut-off Frequency ton tr toff tf FCO VCC = 5.0V 3.0 2.0 2.3 2.0 250 s s s s kHz GROUP Turn-on Time ton tr Rise Time Turn-off Time toff tf Fall Time VCESAT 4.2 3.0 23 14 < 0.4 3.0 2.0 18 11 FIG 1 7/3/03 s s s s V toff ton RL = 1k tr OUTPUT 6.0 4.6 25 15 INPUT VCC = 5.0V RL = 75 600-0 600-1&2 600-3 601/9-1 601/9-2&3 601/9-4&5 (IF=20mA) (IF=10mA) (IF=5mA) UNITS OUTPUT tf OUTPUT 10% 10% 90% 90% FIG 2 DB92190m-AAS/A3 Collector Power Dissipation vs. Ambient Temperature Collector Current vs. Collector-emitter Voltage ( normalised to SFH601-3 ) TA = 25C 50 Collector current IC (mA) Collector power dissipation PC (mW) 200 150 100 50 40 50 30 30 20 15 20 10 10 IF = 5mA 0 0 -30 0 25 50 75 100 0 125 Forward Current vs. Ambient Temperature 70 280 Current transfer ratio CTR (%) 320 60 50 40 30 20 0 8 10 VCE = 5V TA = 25C SFH601-5 240 SFH601-4 200 160 SFH601-3 120 SFH601-2 80 40 SFH601-1 0 -30 0 25 50 75 100 1 125 2 5 Ambient temperature TA ( C ) IF = 10mA VCE = 5V 1.0 0.5 0 -30 0 25 50 75 Ambient temperature TA ( C ) 100 Collector-emitter saturation voltage VCE(SAT) (V) 1.5 10 20 50 Forward current IF (mA) Relative Current Transfer Ratio vs. Ambient Temperature Relative current transfer ratio 6 Current Transfer Ratio vs. Forward Current 80 10 7/3/03 4 Collector-emitter voltage VCE ( V ) Ambient temperature TA ( C ) Forward current IF (mA) 2 Collector-emitter Saturation Voltage vs. Ambient Temperature 0.28 0.24 IF = 10mA IC = 2.5mA 0.20 0.16 0.12 0.08 0.04 0 -30 0 25 50 75 100 Ambient temperature TA ( C ) DB92190m-AAS/A3