T PL IA N M CO *R oH S Features Applications Maximum height of 2.0 mm Input/output of DC/DC converters Current up to 3.6 A Power supplies for: * Portable communication equipment * Camcorders * LCD TVs RoHS compliant* 100 SRU6018 Series - Shielded SMD Power Inductors Bourns Part Number Inductance @ 100 KHz L Tol. (H) (%) SRU6018-1R2Y SRU6018-1R8Y SRU6018-3R3Y SRU6018-4R7Y SRU6018-6R8Y SRU6018-100Y SRU6018-150Y SRU6018-220Y SRU6018-330Y SRU6018-470Y SRU6018-680Y SRU6018-101Y 1.2 1.8 3.3 4.7 6.8 10 15 22 33 47 68 100 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Freq. (MHz) SRF Typ. (MHz) RDC Max. (m) I rms Max. (A) I sat Typ. (A) **KFactor 8 8 8 8 8 12 12 14 10 12 12 20 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 130 90 60 50 40 30 24 18 16 14 12 9 25 28 36 52 60 88 130 190 255 410 600 715 3.60 3.00 2.50 2.20 1.90 1.70 1.50 1.20 1.00 0.80 0.62 0.50 2.80 2.30 1.70 1.40 1.20 1.00 0.80 0.65 0.58 0.46 0.36 0.34 707 579 424 374 303 236 193 163 130 108 90 77 I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Test Voltage ....................................0.1 V .. 230 C, 50 sec. max. Operating Temp. .........-40 C to +125 C (Temperature rise included) Storage Temp. ............-40 C to +125 C Resistance to Soldering Heat ............................... 260 C for 10 sec. Moisture Sensitivity Level ...................... 1 .................. N/A Materials Core ....................Ferrite DR and RI core Wire ............................Enameled copper Terminal ....................................Ag/Ni/Sn Rated Current..Ind. drop 35 % typ. at Isat Temp. Rise.......30 C max. at rated Irms Packaging .................... 800 pcs. per reel Product Dimensions Core Loss vs. Flux Density 1000 100 Core Loss (mW) 100 10 6.50 0.30 (.256 .012) 1 MHz 500 KHz 300 KHz 200 KHz 100 KHz 50 KHz 1 4.90 TYP. (.193) 0.1 6.20 0.30 (.244 .012) 1.80 0.20 (.071 .008) 2.15 (.085) TYP. 0.01 100 1000 10000 2.20 (.087) TYP. Flux Density Bp-p (gauss) Electrical Schematic DIMENSIONS: MM (INCHES) 2.15 TYP. (.085) Recommended Layout REF. 1.10 (.043) 1.10 (.043) REF. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 4.90 REF. (.193) 1.10 (.043) REF. 4.90 (.193) REF. 2.40 (.094) REF. 1.10 (.043) REF. 2.40 REF. (.094) SRU6018 Series SMD Power Inductors SRF0504 Series- -Shielded Line Filter 178.0 DIA. (7.008) 2.0 0.5 (.079 .020) 18.4 (.724) COVER TAPE 13.0 0.5 (.512 .020) DIA. 21.0 0.8 (.827 .031) EMBOSSED CAVITY 50.0 (1.969) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 12.0 (.472) 14 (.551) 4 (.157) END 100 START 100 100 10 8 (.315) NO COMPONENT NO COMPONENT 200 (7.874) DIMENSIONS: COMPONENTS MM (INCHES) 400 (15.748) USER DIRECTION OF FEED QTY: 800 PCS. PER REEL REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL