VTF (Standard) www.vishay.com Vishay Dale Thin Film Conformal, Single In-Line Thin Film Resistor, Through Hole Network (Standard) FEATURES * Off-the-shelf delivery Actual Size * Wide variety of standards Available * Small size (SIP) Available * Standard designs - no NRE * Low capacitance < 0.1 pF/PIN Vishay Dale Thin Film resistor networks are designed to be used in analog circuits in conjunction with operational amplifiers. Engineers can use these circuits to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. This family of standard resistor networks will continually be expanded with new and innovative designs, and Vishay Dale Thin Film stocks most designs in house for off-the-shelf convenience. However, if you can not find the standard network you need, call applications engineering at (716) 283-4025, as we may be able to meet your requirements with a semicustom "match" for a quick delivery. For standard networks with tighter specifications, or for custom networks, contact Applications Engineering at the above number. For a quick review of typical applications, request Vishay's guide to understanding and using thin film precision networks. SCHEMATIC Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING 10 2 ABSOLUTE RATIO 0.1 0.02 TCR TOL. Complete electrical specifications at the end of schematics. ORDERING INFORMATION (R1 =) R1 1 R2 2 3 Actual Size L = Total length = 0.320" (8.13 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 218 where seated height = 0.342" (8.69 mm) max. 1K: VTF209BX 50K: VTF214BX 2K: VTF210BX 100K: VTF215BX 5K: VTF211BX 200K: VTF216BX 10K: VTF212BX 500K: VTF217BX 20K: VTF213BX 1M: VTF218BX Lead (Pb)-free option add "S" after part number, e.g: VTF209SBX RATIO DIVIDER 10:1 R1 + R2 = 10K, 100K, 1M R2 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TWO EQUAL RESISTORS R1 = R2 R1 + R2 * Flame resistant (UL 94 V-0 rating) ORDERING INFORMATION (R1 + R2 =) = 10 9K + 1K = 10K: VTF280BX 90K + 10K = 100K: VTF193BX R2 R1 900K + 100K = 1M: VTF281BX 1 2 3 Lead (Pb)-free option add "S" after part number, e.g: VTF280SBX Actual Size L = Total length = 0.320" (8.13 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 281 where seated height = 0.362" (9.19 mm) max. Revision: 02-Oct-15 Document Number: 60038 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film DIVIDER NETWORK 10:1 R1 = 100K, 1M R1 = 10 R2 ORDERING INFORMATION (R1 =) 100K: VTF282BX R2 R1 1M: VTF283BX 1 2 Actual Size 3 L = Total length = 0.320" (8.13 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 283 where seated height = 0.362" (9.19 mm) max. TWO EQUAL RESISTORS - ISOLATED ORDERING INFORMATION (R1 =) R1 = R2 1K: VTF365BX R1 R2 1 2 3 4 Actual Size 50K: VTF1000BX 2K: VTF997BX 100K: VTF348BX 5K: VTF998BX 200K: VTF1105BX 10K: VTF363BX 500K: VTF1106BX 20K: VTF1104BX 1M: VTF1103BX 25K: VTF999BX L = Total length = 0.420" (10.67 mm) max. H = Seated height = 0.280" (7.11 mm) max. Lead (Pb)-free option add "S" after part number, e.g: VTF209SBX RATIO DIVIDER 10:1 AND 100:1 R1 + R2 + R3 R3 R1 + R2 + R3 R2 + R3 R2 R1 R1 + R2 + R3 = 100K 90K = 100 1 R3 9K ORDERING INFORMATION (R1 + R2 + R3 =) 1K 2 4 3 100K: VTF330BX Actual Size = 10 Lead (Pb)-free option add "S" after part number, e.g: VTF330SBX L = Total length = 0.420" (10.67 mm) max. H = Seated height = 0.280" (7.11 mm) max. FOUR EQUAL RESISTORS ONE COMMON R1 = R2 = R3= R4 = 10K, 100K ORDERING INFORMATION (R1 =) R1 1 2 R2 3 R3 R4 4 10K: VTF366BX 5 Actual Size L = Total length = 0.520" (13.21 mm) max. H = Seated height = 0.280" (7.11 mm) max. Lead (Pb)-free option add "S" after part number, e.g: VTF366SBX DIVIDER NETWORK 2:1 R1 = 10K R2 R1 =1 R3 = R1 x R2 R1 + R2 100K: VTF367BX 1 R1 R2 R3 10K 10K 5K 2 3 4 L = 0.520 (13.21 mm), H = 0.280 (7.11 mm) max. Revision: 02-Oct-15 ORDERING INFORMATION VTF1087BX 5 Actual Size Lead (Pb)-free option add "S" after part number, e.g: VTF1087SBX Document Number: 60038 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film DIVIDER NETWORK 2:1 R1 = 10K R2 R1 =2 R3 = R1 x R2 R1 + R2 R1 R2 R3 10K 20K 6.667K 1 2 3 ORDERING INFORMATION 4 VTF1088BX Actual Size 5 Lead (Pb)-free option add "S" after part number, e.g: VTF1088SBX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max. DIVIDER NETWORK 5:1 R1 = 10K R2 R1 =5 R3 = R1 x R2 R1 R2 R3 10K 50K 8.333K 1 R1 + R2 2 3 ORDERING INFORMATION 4 VTF1089BX 5 Actual Size Lead (Pb)-free option add "S" after part number, e.g: VTF1089SBX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max. DIVIDER NETWORK 10:1 R1 = 10K R2 R1 R1 R2 R3 10K 100K 9.09K ORDERING INFORMATION = 10 R3 = R1 x R2 1 R1 + R2 2 3 VTF1090BX 5 Actual Size 4 Lead (Pb)-free option add "S" after part number, e.g: VTF1090SBX Note: * R2 TCR Tracking 3 ppm/C L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max. DIVIDER NETWORK 1:1 R1 = 5K, 10K, 100K, 1M R1 = R 2 R1 R2 ORDERING INFORMATION (R1 =) R2 R1 5K: VTF225BX 10K: VTF286BX 1 2 3 4 5 100K: VTF219BX 6 Actual Size L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 287 seated height = 0.362" (9.19 mm) max. 1M: VTF287BX Lead (Pb)-free option add "S" after part number, e.g: VTF225SBX DIVIDER NETWORK 2:1 R1 = 10K, 100K R1 R2 R1 =2 R2 R2 ORDERING INFORMATION (R1 =) R1 10K: VTF1009BX 1 2 3 4 L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Revision: 02-Oct-15 5 6 Actual Size 100K: VTF1010BX Lead (Pb)-free option add "S" after part number, e.g: VTF1009SBX Document Number: 60038 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film DIVIDER NETWORK 5:1 R1 = 10K, 100K R1 R2 R2 R1 =5 R2 ORDERING INFORMATION (R1 =) R1 10K: VTF1007BX 1 2 3 4 5 100K: VTF1008BX 6 L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Actual Size Lead (Pb)-free option add "S" after part number, e.g: VTF1007SBX DIVIDER NETWORK 10:1 R1 = 10K R2 R1 R1 R2 R1 ORDERING INFORMATION (R1 =) R2 10K: VTF220BX = 10 1 2 3 4 5 6 Actual Size Lead (Pb)-free option add "S" after part number, e.g: VTF220SBX L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. DIVIDER NETWORK 10:1 R1 = 10K, 100K, 1M R1 R2 R1 R2 R2 ORDERING INFORMATION (R1 =) R1 10K: VTF328BX = 10 100K: VTF284BX 1 2 3 4 5 6 Actual Size 1M: VTF285BX Lead (Pb)-free option add "S" after part number, e.g: VTF328SBX L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 285 seated height = 0.320" (8.13 mm) max. DIVIDER NETWORK 20:1 R1 = 10K, 50K, 200K, 1M R1 R2 R1 R2 R2 ORDERING INFORMATION (R1 =) R1 10K: VTF1073BX = 20 50K: VTF1074BX 1 2 3 4 5 6 Actual Size 200K: VTF1107BX 1M: VTF1108BX Lead (Pb)-free option add "S" after part number, e.g: VTF1073SBX L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. DIVIDER NETWORK 100:1 R1 = 1M R1 R2 R1 R2 R2 R1 ORDERING INFORMATION (R1 =) 1M: VTF1109BX = 100 1 2 Revision: 02-Oct-15 3 4 5 6 Actual Size Lead (Pb)-free option add "S" after part number, e.g: VTF1109SBX Document Number: 60038 4 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film SIX RESISTOR NETWORK (Designed for unity gain/high common mode voltage rejection differential amplifier) Common mode Division ratio 250, 100, 50 R1 = R3 = 1M R2 = 4K, 10K, 20K R4 = 3.984K, 9.901K, 19.608K R5 = 900K, 950K, 975K R6 = 100K, 50K, 25K ORDERING INFORMATION (R1/R2 =) Devision Ratio = 250: VTF442BX 100: VTF443BX R5 50: VTF444BX R6 R1 R2 R4 R3 1M 1 2 3 Lead (Pb)-free option add "S" after part number, e.g: VTF442SBX 1M 4 5 6 7 Actual Size L = Total length = 0.720" (18.29 mm) max. H = Seated height = 0.360" (9.14 mm) max. Maximum voltage to pins 3 and 7 is 300 V FOUR EQUAL RESISTORS ISOLATED ORDERING INFORMATION (R1 =) R1 = 1K, 10K, 25K, 50K, 100K R1 R1 1K: VTF329BX R1 2K: VTF1001BX R1 5K: VTF1002BX 10K: VTF158BX 1 2 3 4 5 6 7 8 Actual Size 25K: VTF1003BX 50K: VTF1004BX 100K: VTF288BX L = Total length = 0.820" (20.83 mm) max. H = Seated height = 0.280" (7.11 mm) max. Lead (Pb)-free option add "S" after part number, e.g: VTF329SBX FOUR EQUAL RESISTORS ISOLATED R1 = 1K, 10K, 100K R1 ORDERING INFORMATION (R1 =) R1 R1 1K: VTF1005BX R1 10K: VTF1006BX 1 2 3 4 5 6 Absolute tolerance = 0.1 % Ratio tolerance = 0.1 % L = Total length = 0.820" (20.83 mm) max. H = Seated height = 0.280" (7.11 mm) max. Revision: 02-Oct-15 7 8 Actual Size 100K: VTF1137BX Lead (Pb)-free option add "S" after part number, e.g: VTF1005SBX Document Number: 60038 5 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film EIGHT EQUAL RESISTORS ONE COMMON ORDERING INFORMATION (R1 =) 10K: VTF368BX Actual Size R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 = 10K, 100K R2 R1 1 2 R3 3 R4 4 R5 5 100K: VTF369BX R6 6 R7 7 R8 8 9 Lead (Pb)-free option add "S" after part number, e.g: VTF368SBX L = Total length = 0.920" (23.37 mm) max. H = Seated height = 0.280" (7.11 mm) max. EIGHT RESISTOR NETWORK (Designed for instrument amplifier with shield driver) ORDERING INFORMATION Actual Size 10K 1K 9K 1K 1K 9K 1K VTF272BX 10K Lead (Pb)-free option add "S" after part number, e.g: VTF272SBX Ref. 1 2 3 5 4 6 7 8 9 L = Total length = 0.920" (23.37 mm) max. H = Seated height = 0.280" (7.11 mm) max. EIGHT BIT R/2R LADDER NETWORK R = 10K, 1K ORDERING INFORMATION (R =) ( 1/2 LSB) Actual Size R R R R R R R 2R 2R 2R 2R 2R 2R 2R 10K: VTF1072BX 100K: VTF267BX 2R 1 2 3 4 5 6 7 8 2R 9 Lead (Pb)-free option add "S" after part number, e.g: VTF1072SBX 10 L = Total length = 1.020" (25.91 mm) max. H = Seated height = 0.280" (7.11 mm) max. RESISTANCE DOUBLER R1 = 1K ORDERING INFORMATION VTF1011BX Actual Size 1 1K 2K 4K 8K 16K 32K 64K 128K 256K R1 R2 R3 R4 R5 R6 R7 R8 R9 2 3 Revision: 02-Oct-15 4 5 6 7 8 9 Lead (Pb)-free option add "S" after part number, e.g: VTF1011SBX 10 Absolute tolerance = 0.1 % Ratio tolerance = 0.1 % TCR tracking = 3 ppm/C L = Total length = 1.02" (25.91 mm) max. H = Seated height = 0.280" (7.11 mm) max. Document Number: 60038 6 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Passivated nichrome - Pin/Lead Number 3 to 10 - Resistance Range 100 to 2 M total - TCR: Absolute 10 ppm/C (1) 0 C to +70 C TCR: Tracking 2 ppm/C (1) 0 C to +70 C Tolerance: Absolute 0.1 % +25 C Tolerance: Ratio 0.02 % +25 C Power Rating: Resistor 100 mW - Power Rating: Package 500 mW - Stability: Absolute R 0.05 % 2000 h at +70 C Stability: Ratio R 0.015 % 2000 h at +70 C Voltage Coefficient 0.01 ppm/V - Material Working Voltage 100 V - 0 C to +70 C - -55 C to +125 C - < - 35 dB - < 0.1 V/C - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C Shelf Life Stability: Ratio R 0.002 % 1 year at +25 C Operating Temperature Range Storage Temperature Range Noise Thermal EMF Note (1) TCR over -55 C to +125 C 20 ppm/C absolute, 3 ppm/C tracking DIMENSIONS AND IMPRINTING in inches and millimeters Part Number E Date Code Pin 1 H Vishay Logo B A D C L DIMENSION INCHES MILLIMETERS A 0.125 min. 3.17 B 0.010 min. 0.25 C 0.100 2.54 typ. D 0.020 typ. 0.48 0.15 E 0.100 max. 2.54 F 0.010 typ. 0.25 F Note * "L" and "H" (length and height) dimensions for each model are found alongside the schematic drawing MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Alumina Body Epoxy coated Terminals Copper alloy Tin/Lead Option Sn60 - Sn63 Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Revision: 02-Oct-15 Sn96.5, Ag3.0, Cu0.5 Hot solder dip Document Number: 60038 7 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTF (Standard) www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF211BX V T F V T F 2 1 1 0 1 0 4 S GLOBAL MODEL PART NUMBER (3 or 4 digits) LEAD (Pb)-FREE (0 or 1 digits) VTF xxx or xxxx S = Lead (Pb)-free (e1) None = Tin lead B X B X PACKAGING BX = Conductive foam box Example: 214 1004 Historical Part Number example: VTF 211 (for reference purposes only) Revision: 02-Oct-15 VTF 211 MODEL PART NUMBER Document Number: 60038 8 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000