NAEW111012213 - ABB Semiconductors

Specification sheet Deltapi N Series

Pneumatic Transmitters

Model NAE

Differential pressure transmitter

with remote diaphragm seals

The blind type differential pressure transmitter, mod. NAE, is

used to measure a differential pressure and convert it into a

proportional pneumatic signal.

The instrument works on the force-balance principle and

consists of two main units:

the measuring unit is formed by two AISI 316 forged

halfbodies, measuring capsule and two diaphragm separators

completed with capillaries.

A double diaphragm capsule is placed within two halfbodies to

releve the differential pressure transmitted by the two liquid

filled separators and capillaries.

The capsule is available in two versions: 2in or 3in diameter

diaphragms, filled with a special liquid which can withstand the

maximum rated static pressure on either side without damage.

the transmission unit converts the differential force applied to

the measuring element into a proportional output pneumatic

signal.

The output pressure, generated by a flapper nozzle relay, is fed

to a feedback bellows with a rising pressure until the bellows

force balances that of the measuring element.

Span value continuously adjustable by an internal micrometric

screw.

Zero value adjustable by an external screw.

Mounting in a vertical position on 2in diameter pipe by a

special bracket.

OPTIONAL EXTRA FEATURES

A zero elevation or suppression device allows to set as a

zero of the transmitter a measured variable value different from

zero.

Zero suppression value (S) added to the calibrated span must

never exceed the upper range limit (M) of measuring capsule:

S + span ≤ M (see table).

GENERAL CHARACTERISTICS

Air filter regulator can be directly mounted on the transmitter,

with or without pressure gauge, and connected with piping and

fittings either in stainless steel or copper.

Special versions of air filter regulator and gauges, in stainless

steel, are available on request.

Seal diaphragm materials

AISI 316L, Hastelloy C 276, Tantalum,

AISI 316L or Hastelloy C 276 with Teflon anti-stick coating,

AISI 316L with Teflon coating anti-corrosion and anti-stick

Measuring capsule material

AISI 316L

Capsule filling

Silicone oil

Seal filling / working temperature range

See table "A"

Cover material

thermoplastic resin

Surface protections

AISI 316L body and flange: none

Process connections

- wafer remote seals: 3in ANSI 150 to 900;

DN80 DIN ND 10 to 160

- flush diaphragm flanged seal: 3in ANSI 150 to 900;

DN80 DIN ND 16 to 160

- extended diaphragm flanged seal: 3in ANSI 150-300;

DN80 DIN ND 16-40

Pneumatic connections

- Air supply (in figure ref. A): 1/4 in NPT-F

- Output (in figure ref. B): 1/4 in NPT-F

Pressure gauge

Brass with stainless steel case (all stainless steel on request)

external diameter 51 mm; 0-200 kPa, 0-2 bar and 0-30 psi

indication on 82 mm/260° scale.

Air filter regulator

with copper or stainless steel piping, as specified.

Die cast aluminium alloy with light grey epoxy finish.

Net weight (maximum)

23 kg approx

Packing

expanded polythene box

Air supply

nom. 140 kPa (1.4 bar, 20 psi); min. 125 kPa (1.25 bar,

18 psi); max. 175 kPa (1.75 bar, 25 psi)

Output signal

20 to 100 kPa/0.2 to 1 bar, 3 to 15 psi or 0.2 to 1 kg/cm2

Static air consumption

350 Nl/h

Maximum output flow

- with rising output pressure: 30 Nl/min.

- with falling output pressure: 40 Nl/min.

Accuracy

± 0.5% F.S.D. (typical)

Differential thermal drift (for ambient temperature variation

of 20°C between the separators)

2%/10° C

Thermal drift (for ambient temperature variation between

- 20° C and + 65° C)

•with 2in diaphragm

span 40 to 80 kPa (400 to 800 mbar): 0.7%/10°C

span 80 to 170 kPa (800 to 1700 mbar): 0.6%/10°C

•with 3in diaphragm

span 10 to 52 kPa (100 to 520 mbar): 0.6%/10°C

- Static pressure effect :

for variation of 3.5 MPa (35 bar): ≤ ± 0.25%

- Maximum displacement

- with 2in diaphragm: 1 cm3

- with 3in diaphragm: 1.5 cm3

Degree of protection in accordance with IEC 529

IP55

Ambient temperature limits

-40 and + 120°C

Process temperature limits

Same as fill fluid limits. Refer to table A.

204°C (400°F) for use with Teflon anti-stick coating.

Bodies material

AISI 316L

MAXIMUM

ZERO

ELEVATION

STATIC PRESSURE

LIMITS

Full vacuum and

MAXIMUM

ZERO

SUPPRESSION (S)

(•) Equal to Maximum Working pressure as well as overrange limit.

170 kPa

1700 mbar

52 kPa

520 mbar

10 MPa

100 bar

or flange/fitting rating

of the seal whichever

is less (•)

MEASURING

CAPSULE

(DIAPHRAGM DIA.)

2 in

3 in

SPAN

LIMITS

min. and max.

40 and 170 kPa

400 and 1700 mbar

10 and 52 kPa

100 and 520 mbar

RANGE

LIMITS

lower and upper (M)

-170 and +170 kPa

-1700 and +1700 mbar

-52 and +52 kPa

-520 and +520 mbar

130 kPa

1300 mbar

42 kPa

420 mbar

SPECIFICATIONS

The data were obtained from laboratory tests on standard instruments with: AISI 316L bodies; AISI 316L measuring element ; silicone

oil (DC200) filling; gasket: PTFE; calibration span: 18 kPa - 180 mbar (for 3in diaphragm), 70 kPa - 700 mbar (for 2in diaphragm)

TABLE 'A' - FILL FLUIDS CHARACTERISTICS

FILL FLUIDS

(APPLICATION)

SPECIFICATIONS @ 25°C (77°F)

OPERATING CONDITIONS Thermal

Expansions

x10-3 /°C

Silicone oil DC 200

(General purpose)

Silicone oil DC 702

(High temperature)

Silicone oil DC 704

(High temperature)

Neobee M-20

(Food-Sanitary)

Glycerin Water (70%)

(Food-Sanitary)

DC 97-9120

PHARMA B GRADE

(Food-Sanitary)

Inert (Galden)

(Oxygen Service)

KTFILL-1

(Paints and specials)

Pmin

mbar abs

(psia)

Viscosity

Kinematic

(cSt)

Specific

gravity

Tmin

°C (°F)

Tmax °C (°F)

@ P min

Tmax °C (°F)

@ P >of

0.93

1.07

0.92

1.08

0.96

1.8

-40

(-40)

-7

(+20)

(70)

-18

(0)

-7

(+20)

-40

(-40)

-18

(0)

-10

(+14)

200 (390)

@ 35 mbar abs

315 (600)

@ atmosphere

340 (645)

@ atmosphere

200 (390)

@ atmosphere

93 (200)

@ atmosphere

200 (390)

@ 35 mbar abs

160 (320)

@ atmosphere

300 (570)

@ 400 mbar abs

0.7

(0.1)

0.7

(0.1)

0.7

(0.1)

130

(1.9)

atmosphere

0.7

(0.1)

0.7

(0.1)

0.7

(0.1)

160

(320)

200

(390)

230

(445)

150

(300)

(200)

160

(320)

(150)

160

(320)

9.8

2.2

4.5

1.08

0.78

0.95

1.2

0.36

1.04

1.1

0.92

Standard

de VERSION

fg BODY

AISI 316L

Span limits kPa (inH2O) (Note 1)

hi Diaphragm material Core material

AISI 316L

AISI 316L 10 and 52 (40 and 208)

40 and 170 (160 and 682) 10 01

Filling

Silicone oil

Note 1: Multiply by 10 the value in kPa (MPa) to obtain mbar (bar)

ORDERING INFORMATION

Select one character or set of characters from each category and specify complete catalog number.

In addition quote the required seal model from one of the enclosed N6 ordering information

NAE

abc de fg hi j k lm

BASE MODEL

VERSION

BODY

SPAN LIMITS

CONSTRUCTION

OUTPUT

EXTRAS

PRODUCT CODE

abc BASE MODEL Code

Differential pressure transmitter with remote diaphragm seals

Transmitter with remote diaphragm seals (to be quoted separately as N6W, N6E or N6F)

CONSTRUCTION

OUTPUT 1

3 to 15 psi

3 to 15 psi with zero elevation device

3 to 15 psi with zero suppression device

0.2 to 1.0 kg/cm2

0.2 to 1.0 kg/cm2 with zero elevation device

0.2 to 1.0 kg/cm2 with zero suppression device

20 to 100 kPa / 0.2 to 1 bar

20 to 100 kPa / 0.2 to 1 bar with zero elevation device

20 to 100 kPa / 0.2 to 1 bar with zero suppression device

According to

ANSI/ISA S 51.1-1979

standard terminology

Piping

material Air filter

regulator Pressure

gauge

EXTRAS

- -

with

- -

with

Identification

tag material

Stainless Steel

- -

Stainless Steel

Copper

Stainless Steel

Copper

MEASURING ELEMENT

Two remote seals

d NUMBER OF REMOTE SEALS

ef MOUNTING CONNECTION

3in ANSI

DN80, DIN ND 10-40

DN80, DIN ND 64-160

AISI 316L serrated seat finish

AISI 316L smooth seat finish

Hastelloy C 276

Tantalum (max temperature 260°C/500°F) - (NOT VACUUM)

AISI 316L ss with Teflon anti-stick coating

Hastelloy C 276 with Teflon anti-stick coating

AISI 316L ss with Teflon coating anti-corrosion and antistick

hDIAPHRAGM MATERIAL

Select one character or set of characters from each category and specify complete catalog number.

N6W

abc BASE MODEL Code

Wafer remote seals

N6W WAFER REMOTE SEALS

Same as diaphragm

OTHER WETTED MATERIAL (Not diaphragm)

(only available with

code F3 at position "ef")

None

EXTENSION LENGTH

CAPILLARY - Fill fluid A

Silicone oil (DC 200)

Silicone oil (DC 702)

Silicone oil (DC 704)

Glycerin/Water

Inert Fluid

KTFILL-1

Neobee M-20

DC97 - 9120 PHARMA B-GRADE

SYSTEM LENGTH m(feet) 03

1 (3)

1.5 (5)

2 (7)

2.5 (8)

3 (10)

3.5 (12)

4 (13)

4.5 (15)

5 (17)

6 (20)

7.5 (25)

9 (30)

10 (35)

None

Zone "0" protection (not available with diaphragm material code 7, 8 at position "h")

CERTIFICATION

no None

OPTIONS

Two remote seals

d NUMBER OF REMOTE SEALS

AISI 316L ss

Hastelloy C 276

AISI 316L ss with Teflon anti-stick coating

Hastelloy C 276 with Teflon anti-stick coating

AISI 316L ss with Teflon coating anti-corrosion and antistick

hDIAPHRAGM MATERIAL 2

Select one character or set of characters from each category and specify complete catalog number.

N6E

abc BASE MODEL Code

Flanged extended diaphragm seals

N6E FLANGED EXTENDED DIAPHRAGM SEALS

AISI 316L ss

Hastelloy C (only available with diaphragm material code 3, 8 and A at position "h")

OTHER WETTED MATERIAL (Not diaphragm) 2

(only available with 3in ANSI CL 150/300

connection, code K3,S3,L3,36 at position "ef")

2in

4in

6in

EXTENSION LENGTH

CAPILLARY - Fill fluid A

Silicone oil (DC 200)

Silicone oil (DC 702)

Silicone oil (DC 704)

Glycerin/Water

Inert Fluid

KTFILL-1

Neobee M-20

SYSTEM LENGTH m(feet) 03

1 (3)

1.5 (5)

2 (7)

2.5 (8)

3 (10)

3.5 (12)

4 (13)

4.5 (15)

5 (17)

6 (20)

7.5 (25)

9 (30)

10 (35)

None

Zone "0" protection (not available with diaphragm code 7 or 8 at position "h")

CERTIFICATION

no None

OPTIONS

ef MOUNTING CONNECTION

3in ANSI CL150

3in ANSI CL300

DN80, DIN ND 16

DN80, DIN ND 40

Material

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Two remote seals

d NUMBER OF REMOTE SEALS

N6F

abc BASE MODEL Code

Flanged flush diaphragm seals

Same as diaphragm

OTHER WETTED MATERIAL (Not diaphragm)

iNone

EXTENSION LENGTH

CAPILLARY - Fill fluid A

Silicone oil (DC 200)

Silicone oil (DC 702)

Silicone oil (DC 704)

Glycerin/Water

Inert Fluid

KTFILL-1

Neobee M-20

DC97 - 9120 PHARMA B-GRADE

SYSTEM LENGTH m(feet) 03

1 (3)

1.5 (5)

2 (7)

2.5 (8)

3 (10)

3.5 (12)

4 (13)

4.5 (15)

5 (17)

6 (20)

7.5 (25)

9 (30)

10 (35)

mCERTIFICATION 0

None

OPTIONS 00

Compliance to NACE class II bolting, according to specification MR0175, latest revision

Select one character or set of characters from each category and specify complete catalog number.

N6F FLANGED FLUSH DIAPHRAGM SEALS

None

Zone "0" protection (not available with diaphragm code 7 or 8 at position "h")

AISI 316L serrated seat finish

AISI 316L smooth seat finish

Hastelloy C 276

Tantalum (max temperature 260°C/500°F) - (NOT VACUUM)

AISI 316L ss with Teflon anti-stick coating

Hastelloy C 276 with Teflon anti-stick coating

AISI 316L ss with Teflon coating anti-corrosion and antistick

hDIAPHRAGM MATERIAL 2

(only available with 3in connection code

K3,S3,L3,36,37,38,39,3A at position "ef")

ef MOUNTING CONNECTION K3

Material

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

Carbon steel

AISI 316 ss

3in ANSI CL150

3in ANSI CL300

3in ANSI CL600

3in ANSI CL900

DN80, DIN ND 16

DN80, DIN ND 40

DN80, DIN ND 64

DN80, DIN ND 100

DN80, DIN ND 160

• N6W Remote wafer seals

SIZE DIMENSIONS mm (in)

139.7 (5.5)

23 (0.9)

B dia)

A (dia)

127 (5)

138 (5.43)

89 (3.5)

3 in

DN 80

Process

Connection

Capillary to

instrument

Raised Face

Flange

MOUNTING DIMENSIONS

To remote

seals

Wafer seal maximum working pressure:

16 MPa, 160 bar, 2320 psi but not greater than the

backup flange rating (not supplied)

• N6E Remote flanged extended diaphragm seals

158 (6.22)

Capillary to

Instrument

2", 4" or 6"Insertion

length is available

The Company's policy is one of continuous product

improvement and the right is reserved to modify the

specifications contained herein without notice.

SS/NAE Rev 7

ABB Inc.

125 East County Line Road

Warminster, Pa 18974

USA

Tel. (215) 674-6000

Facsimile (215) 674-7183

ABB Ltd.

Howard Road

St. Neots, Cambs.

England PE19 8EU

Tel. (01480) 475321

Facsimile (01480) 217948

ABB Instrumentation spa

Via Statale, 113

22016 Lenno (CO)

Italia

Tel. 0344 58111

Facsimile 0344 56278

3in ANSI CL 150

3in ANSI CL 300

3in ANSI CL 600

3in ANSI CL 900

DN80 DIN ND16

DN80 DIN ND40

DN80 DIN ND64

DN80 DIN ND100

DN80 DIN ND160

DIMENSIONS mm (in)

SIZE/RATING

158 (6.22)

Capillary to

Instrument

• N6F Remote flanged flush diaphragm seals

N° of

holes

9.5 (0.37)

flush

89 (3.5)

127 (5)

138 (5.43)

B (dia) 152.5 (6)

168.5 (6.63)

190.5 (7.5)

160 (6.3)

170 (6.7)

180 (7.08)

C (dia) D (dia)

190.5 (7.5)

210 (8.26)

241 (9.48)

200 (7.87)

215 (8.46)

230 (9.05)

20 (0.79)

22 (0.86)

26 (1.02)

18 (0.71)

22 (0.86)

26 (1.02)

E (dia) 24 (0.94)

28.5 (1.12)

32 (1.26)

38.5 (1.51)

20 (0.79)

24 (0.94)

28 (1.1)

32 (1.26)

36 (1.42)

Flanged seal maximum working pressure:

ANSI CL 150: 2 MPa, 20 bar, 290 psi

ANSI CL 300: 5 MPa, 50 bar, 725 psi

ANSI CL 600: 10 MPa, 100 bar, 1450 psi

ANSI CL 900: 16 MPa, 160 bar, 2320 psi

DIN ND 16: 1.6 MPa, 16 bar, 230 psi

DIN ND 40: 4 MPa, 40 bar, 580 psi

DIN ND 64: 6.4 MPa, 64 bar, 930 psi

DIN ND 100: 10 MPa, 100 bar, 1450 psi

DIN ND 160: 16 MPa, 160 bar, 2320 psi

extended

72 (2.83)

A (dia)