*RP105Q (SC-88A) is the discontinued product as of April, 2018. RP105x Series Low Voltage 400 mA LDO Regulator No. EA-179-180419 OUTLINE The RP105x is a 400 mA output type CMOS-based voltage regulator with capability of low input voltage (Min. 0.9 V) and low output voltage (Min. 0.6 V). This device is remarkably improved the performance at low input voltage compared with conventional low voltage LDOs, and two power supply voltage type. (Another power source, VBIAS pin voltage must be Min. 2.4 V). The device consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit to avoid the destruction, a UVLO circuit with monitoring input voltage, and so on. The RP105x has the ultra-low on resistance output driver, the on resistance is Typ. 0.4 (VOUT = 0.8 V, IOUT = 300 mA). The built-in driver is Nch MOSFET, thus the load transient response is excellent, (under the condition of the current between 1 mA and 400 mA, tr = 0.5 s, the undershoot level is approximately 50 mV). The output voltage of this device is fixed with high accuracy. Since the packages for the device are DFN(PLP)1212-6, DFN1212-5, SOT-23-5 and SC-88A therefore high density mounting of the IC on boards is possible. FEATURES Supply Current ......................................................... Typ. 28 A Standby Current ....................................................... Typ. 0.1 A Ripple Rejection ....................................................... Typ. 80 dB (f = 1 kHz, VIN Ripple) *************************************************************************** . Typ. 50 dB (f = 1 kHz, VBIAS Ripple) Output Voltage Range.............................................. 0.6 V to 1.5 V (0.1 V step) For other voltages, refer to MARKING SPECIFICATION Input Voltage Range (VBIAS) ..................................... 2.4 V to 5.25 V (VOUT < 0.8 V) ********************************************************************** Set VOUT + 1.6 V to 5.25 V (VOUT 0.8 V) Input Voltage Range (VIN) ........................................ RP105xxxxB/D: 0.9 V to VBIAS (VOUT < 0.8 V) Set VOUT + 0.1 V to VBIAS (VOUT 0.8 V) RP105xxxxE/F: 0.9 V to VBIAS Output Voltage Accuracy.......................................... Typ. 15 mV (Ta = 25C) Temperature-Drift Coefficient of Output Voltage ...... Typ. 50 ppm/C Dropout Voltage ....................................................... DFN1212-5: Typ. 105 mV (IOUT = 400 mA, VOUT = 1.5 V, VBIAS = 3.6 V) Line Regulation ........................................................ Typ. 0.02%/V Packages ................................................................. DFN(PLP)1212-6, SC-88A, SOT-23-5, DFN1212-5 Built-in Fold Back Protection Circuit ........................ Typ. 120 mA (Current at short mode) Ceramic capacitors are recommended .................... CBIAS = CIN = 1.0 F or more, COUT = 2.2 F or more APPLICATIONS Power source for battery-powered equipment. Power source for electrical appliances such as cameras, VCRs and camcorders. Power source for portable communication equipment. 1 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 SELECTION GUIDE The output voltage, the UVLO circuit, the auto-discharge function(1), the package, and the taping type for the device are user-selectable options. Selection Guide Product Name RP105Kxx1-TR RP105Qxx2-TR-FE (2) RP105Nxx1-TR-FE RP105Lxx1-TR Package Quantity per Reel Pb Free Halogen Free DFN(PLP)1212-6 5,000 pcs Yes Yes SC-88A 3,000 pcs Yes Yes SOT-23-5 3,000 pcs Yes Yes DFN1212-5 5,000 pcs Yes Yes xx : The set output voltage (VSET) can be designated within the range of 0.6 V (06) to 1.5 V (15) in 0.1 V step. If the set output voltage (VSET) is designated in 0.01 V step, indicate the product name as follows. 1.05 V: RP105x10x5-TR : CE pin polarity and auto-discharge function of the product can be defined as follows. (B) "H" active, auto-discharge function is not included, UVLO is included (D) "H" active, auto-discharge function is included, UVLO is included (E) "H" active, auto-discharge function is not included, UVLO is not included (F) "H" active, auto-discharge function is included, UVLO is not included BLOCK DIAGRAMS VBIAS VBIAS VIN VOUT VIN UVLO UVLO Vref Vref Current Limit Current Limit GND CE RP105xxxxB/E Block Diagram (1) VOUT CE GND RP105xxxxD/F Block Diagram Auto-discharge function quickly lowers the output voltage to 0 V, when the chip enable signal is switched from the active mode to the standby mode, by releasing the electrical charge accumulated in the external capacitor. (2) RP105Qxx2-TR-FE supports only RP105Qxx2B/D. 2 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 PIN DESCRIPTIONS Mark Side Bump Side 6 4 5 4 5 5 6 4 5 (mark side) 1 2 3 3 2 1 DFN(PLP)1212-6 Pin Configuration 1 2 3 SC-88A Pin Configuration 4 (mark side) 1 2 3 SOT-23-5 Pin Configuration DFN1212-5 Pin Configuration DFN(PLP)1212-6 Pin Description Pin No Symbol Pin Description 1 VBIAS Input Pin 1 2 GND Ground Pin 3 CE Chip Enable Pin ("H" Active) 4 VIN Input Pin 2 5 NC No Connection 6 VOUT Output Pin SC-88A Pin Description Pin No Symbol Pin Description 1 VBIAS Input Pin 1 2 GND Ground Pin 3 VOUT Output Pin 4 VIN Input Pin 2 5 CE Chip Enable Pin ("H" Active) 3 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 SOT-23-5 Pin Description Pin No Symbol Pin Description 1 VIN Input Pin 2 2 GND Ground Pin 3 CE 4 VBIAS Input Pin 1 5 VOUT Output Pin Chip Enable Pin ("H" Active) DFN1212-5 Pin Description 4 Pin No Symbol Pin Description 1 VOUT Output Pin 2 VBIAS Input Pin 1 3 CE Chip Enable Pin ("H" Active) 4 VIN Input Pin 2 5 GND Ground Pin *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 ABSOLUTE MAXIMUM RATINGS Aboslute Maximum Ratings Symbol VBIAS VIN VCE VOUT IOUT PD Item Input Voltage Input Voltage (for Driver) Input Voltage (CE Pin) Output Voltage Output Current Power Dissipation(1) DFN(PLP)1212-6 JEDEC STD. 51-7 Test Land Pattern 450 SC-88A Standard Test Land Pattern 380 SOT-23-5 DFN1212-5 Tj Tstg Rating 6.0 -0.3 to VBIAS + 0.3 6.0 -0.3 to VIN + 0.3 500 JEDEC STD. 51-7 Test Land Pattern JEDEC STD. 51-7 Test Land Pattern Junction Temperature Range Storage Temperature Range 660 Unit V V V V mA mW 560 C C -40 to 125 -55 to 125 ABSOLUTE MAXIMUM RATINGS Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safety for both device and system using the device in the field. The functional operation at or over these absolute maximum ratings is not assured. RECOMMENDED OPERATING CONDITIONS Recommended Operating Conditions Symbol Item VBIAS VIN Ta Input Voltage Range Operating Temperature Range Rating Unit 2.4 to 5.25 0.9 to VBIAS V V VSET + 0.1 to VBIAS (RP105xxxxB/D and when VSET 0.8 V) -40 to 85 V C RECOMMENDED OPERATING CONDITIONS All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions. (1) Refer to POWER DISSIPATION for detailed information. 5 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 ELECTRICAL CHARACTERISTICS VBIAS = VCE = 3.6 V, VIN = Set VOUT + 0.5 V, IOUT = 1 mA, CBIAS = CIN = 1.0 F, COUT = 2.2 F, unless otherwise noted. The specifications surrounded by are guaranteed by design engineering at -40C Ta 85C. RP105x Symbol VOUT IOUT VOUT /IOUT (Ta = 25C) Item Dropout Voltage ISS Supply Current Istandby Standby Current RR VBIAS VIN Line Regulation Ripple Rejection Input Voltage(1) Input Voltage (for Driver)(1) ISC ICEPD Max. Unit Set VOUT + 15 mV V -40C Ta 85C Set VOUT -20 mV Set VOUT + 20 mV V 400 mA 1 mA IOUT 400 mA 30 50 mV 1 mA IOUT 400 mA 15 35 mV Refer to PRODUCT-SPECIFIC ELECTRICAL CHARACTERISTICS IOUT = 0 mA 28 40 A VCE = 0 V 0.1 3.0 A 2.4 V VBIAS 5.0 V 0.02 0.1 Set VOUT + 0.3 V VIN 2.4 V 0.02 0.1 IOUT = 30 mA, f = 1 kHz VIN Ripple 0.2 Vp-p 80 IOUT = 30 mA, f = 1 kHz VBIAS Ripple 0.2 Vp-p 50 2.4 5.25 VOUT 0.8 V Set VOUT + 1.6 5.25 VOUT < 0.8 V 0.9 VBIAS VOUT 0.8 V Set VOUT + 0.1 VBIAS 0.9 VBIAS RP105xxxxB/D %/V dB VOUT < 0.8 V RP105xxxxE/F VOUT /Ta Typ. Set VOUT -15 mV Output Current Load Regulation (K, Q, N package) Load Regulation (L package) Min. Ta = 25C Output Voltage VDIF VOUT /VIN Conditions V V Output Voltage -40C Ta 85C Temperature Coefficient 50 ppm /C Short Current Limit 120 mA 1.0 A CE Pull-down Current VOUT = 0 V All test items listed under Electrical Characteristics are done under the pulse load condition (Tj Ta = 25C) except Output Noise, Ripple Rejection and Output Voltage Temperature Coefficient. (1) 6 The maximum Input Voltage listed under Electrical Characteristics is 5.25 V. If for any reason the input voltage exceeds 5.25 V, it has to be no more than 5.5 V with 500 hours of the total operating time. *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 ELECTRICAL CHARACTERISTICS (continued) VBIAS = VCE = 3.6 V, VIN = Set VOUT + 0.5 V, IOUT = 1 mA, CBIAS = CIN = 1.0 F, COUT = 2.2 F, unless otherwise noted. The specifications surrounded by are guaranteed by design engineering at -40C Ta 85C. RP105x Symbol (Ta = 25C) Item VCEH CE Input Voltage "H" VCEL CE Input Voltage "L" VIN Under Voltage VIN UVLO Lock Out (only RP105xxxxB/D) Detector Delay Time tdelay (only RP105xxxxB/D) en RLOW Conditions Min. Typ. Max. Unit 0.8 IOUT = 1.0 A V Set VOUT + 50 mV 0.3 V Set VOUT + 100 mV V 100 s Output Noise BM = 10 Hz to 100 kHz IOUT = 30 mA, Set VOUT = 0.6 V 70 Vrms Nch On Resistance For auto-discharge (only RP105xxxxD/F) VBIAS = 3.6 V, VCE = "L" 50 All test items listed under Electrical Characteristics are done under the pulse load condition (Tj Ta = 25C) except Output Noise, Ripple Rejection and Output Voltage Temperature Coefficient. 7 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 PRODUCT-SPECIFIC ELECTRICAL CHARACTERISTICS DFN(PLP)1212-6, SC-88A, SOT-23-5 are guaranteed by design engineering at -40C Ta 85C The specifications surrounded by Dropout Voltage Set VOUT (V) VBIAS (V) VGS (V) 0.6 3.6 0.7 VDIF (IOUT = 300 mA) (V) VDIF (IOUT = 400 mA) (V) Typ. Max. Typ. Max. 3.0 0.115 0.180 0.180 0.320 3.6 2.9 0.120 0.190 0.180 0.320 0.8 3.6 2.8 0.120 0.190 0.180 0.300 0.9 3.6 2.7 0.120 0.190 0.180 0.300 1.0 3.6 2.6 0.120 0.190 0.180 0.280 1.1 3.6 2.5 0.120 0.190 0.180 0.280 1.2 3.6 2.4 0.130 0.200 0.180 0.280 1.3 3.6 2.3 0.130 0.200 0.180 0.260 1.4 3.6 2.2 0.130 0.200 0.180 0.260 1.5 3.6 2.1 0.130 0.200 0.180 0.260 Dropout Voltage (VGS (V), VDIF (V), IOUT = 200 mA) (Ta = 25C) VBIAS = 2.5 V VBIAS = 3.0 V Set VOUT (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) 0.6 1.9 - 2.4 - 2.7 - 3.0 - 3.6 - 4.4 - VBIAS = 3.3 V VBIAS = 3.6 V VBIAS = 4.2 V VBIAS = 5.0 V 0.7 1.8 - 2.3 - 2.6 - 2.9 - 3.5 - 4.3 - 0.8 1.7 0.098 2.2 0.093 2.5 0.093 2.8 0.092 3.4 0.092 4.2 0.092 0.9 1.6 0.098 2.1 0.094 2.4 0.093 2.7 0.092 3.3 0.092 4.1 0.092 1.0 2.0 0.094 2.3 0.093 2.6 0.092 3.2 0.092 4.0 0.092 1.1 1.9 0.096 2.2 0.094 2.5 0.094 3.1 0.093 3.9 0.093 1.2 1.8 0.098 2.1 0.096 2.4 0.095 3.0 0.095 3.8 0.094 1.3 1.7 0.098 2.0 0.096 2.3 0.095 2.9 0.095 3.7 0.095 1.4 1.6 0.098 1.9 0.096 2.2 0.095 2.8 0.095 3.6 0.095 1.8 0.096 2.1 0.095 2.7 0.095 3.5 0.095 1.5 All of units are tested and specified under load conditions such that Tj Ta = 25C except for Output Noise, Ripple Rejection and Output Voltage Temperature Coefficient items. VBIAS pin voltage must be equal or more than Set VOUT + 1.6 V. 8 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 DFN1212-5 are guaranteed by design engineering at -40C Ta 85C The specifications surrounded by Dropout Voltage Set VOUT (V) VBIAS (V) VGS (V) 0.6 3.6 0.7 VDIF (IOUT = 300 mA) (V) VDIF (IOUT = 400 mA) (V) Typ. Max. Typ. Max. 3.0 - - - - 3.6 2.9 - - - - 0.8 3.6 2.8 0.077 0.130 0.105 0.170 0.9 3.6 2.7 0.077 0.130 0.105 0.170 0.95 3.6 2.65 0.077 0.130 0.105 0.170 1.0 3.6 2.6 0.077 0.130 0.105 0.170 1.05 3.6 2.55 0.077 0.130 0.105 0.170 1.1 3.6 2.5 0.077 0.130 0.105 0.170 1.2 3.6 2.4 0.077 0.130 0.105 0.170 1.3 3.6 2.3 0.077 0.130 0.105 0.170 1.4 3.6 2.2 0.077 0.130 0.105 0.170 1.5 3.6 2.1 0.077 0.130 0.105 0.170 VBIAS = 3.3 V VBIAS = 3.6 V VBIAS = 4.2 V VBIAS = 5.0 V Dropout Voltage (VGS (V), VDIF (V), IOUT = 200 mA) VBIAS = 2.5 V VBIAS = 3.0 V (Ta = 25C) Set VOUT (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) VGS (V) VDIF (V) 0.6 1.9 - 2.4 - 2.7 - 3.0 - 3.6 - 4.4 - 0.7 1.8 - 2.3 - 2.6 - 2.9 - 3.5 - 4.3 - 0.8 1.7 - 2.2 - 2.5 - 2.8 - 3.4 - 4.2 - 0.9 1.6 0.059 2.1 0.054 2.4 0.053 2.7 0.051 3.3 0.050 4.1 0.048 0.95 2.05 0.054 2.35 0.053 2.65 0.051 3.25 0.050 4.05 0.048 1.0 2.0 0.054 2.3 0.053 2.6 0.051 3.2 0.050 4.0 0.048 1.05 1.95 0.054 2.25 0.053 2.55 0.051 3.15 0.050 3.95 0.048 1.1 1.9 0.054 2.2 0.053 2.5 0.051 3.1 0.050 3.9 0.048 1.2 1.8 0.054 2.1 0.053 2.4 0.051 3.0 0.050 3.8 0.048 1.3 1.7 0.054 2.0 0.053 2.3 0.051 2.9 0.050 3.7 0.048 1.4 1.6 0.054 1.9 0.053 2.2 0.051 2.8 0.050 3.6 0.048 1.8 0.053 2.1 0.051 2.7 0.050 3.5 0.048 1.5 All of units are tested and specified under load conditions such that Tj Ta = 25C except for Output Noise, Ripple Rejection and Output Voltage Temperature Coefficient items. VBIAS pin voltage must be equal or more than Set VOUT + 1.6 V. 9 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 APPLICATION INFORMATION TYPICAL APPLICATION DC/DC_OUT L VIN 3.6 V Li-ion or 3 cell RP500x CE 10 F External Components Symbol 10 LX VBIAS 4.7 H CE AGND PGND VIN 10 F VR_OUT RP105x VOUT Step-down DC/DC Converter VOUT CBIAS 1 F GND CIN 1 F Descriptions COUT 2.2 F, Ceramic Capacitor, GRM155B30J225ME15, MURATA CBIAS, CIN 1.0 F, Ceramic Capacitor, GRM155B31A105KE15, MURATA COUT 2.2 F *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 TECHNICAL NOTES UVLO (Undervoltage Lockout) In RP105xxxxB/D, UVLO detects and turns off the output when the input voltage VIN drops lower than or equal to VSET + 50 mV (Typ.) while CE = "H". Since RP105xxxxE/F does not have UVLO, it continues to output even if VIN drops to VSET + 50 mV (Typ.) or lower. When VIN drops below the set output voltage VSET, UVLO does not turn off the output in RP105xxxxE/F while CE = "H", therefore the current flows from VBIAS pin to VIN pin via the inside IC. This will not be generated in RP105xxxxB/D since UVLO turns off the output when VIN is lower than or equal to VSET + 50 mV (Typ). Phase Compensation In this device, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, use a capacitor for COUT with the capacity of equal or more than 2.2 F. If tantalum capacitors are connected as COUT, and if the equivalent series resistance (ESR) value is large, the operation might be unstable. Because of this, test the device with as same external components as ones to be used on the PCB. PCB Layout Make VBIAS, VIN, and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result. Connect a capacitor with a capacitance value as much as 1.0 F or more between VBIAS pin and GND, between VIN pin and GND, and as close as possible to the pins. Set external components, especially the output capacitor, as close as possible to the device, and make wiring as short as possible. VIN source is supposed to be the output of the DC/DC converter. The value should be equal or lower than VBIAS voltage. 11 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 TYPICAL CHARACTERISTICS Note: Typical Characteristics are intended to be used as reference data; they are not guaranteed. 1) Output Voltage vs. Output Current (CBIAS = 1.0 F, CIN = COUT = 2.2 F, Ta = 25C) RP105x06xx RP105x06xx VBIAS=3.6V 0.7 0.6 0.6 Output Voltage VOUT (V) Output Voltage VOUT (V) VBIAS=2.4V 0.7 0.5 0.4 0.3 0.2 VIN=0.79V VIN=1.1V VIN=2.4V 0.1 0 0.5 0.4 0.3 0.2 VIN=0.79V VIN=1.1V VIN=3.6V 0.1 0 0 100 200 300 400 500 600 700 800 Output Current IOUT (mA) 0 100 200 300 400 500 600 700 800 Output Current IOUT (mA) RP105x06xx RP105x10xx VBIAS=5.25V VBIAS=2.6V 1.2 0.6 0.5 0.4 0.3 0.2 VIN=0.79V VIN=1.1V VIN=5.25V 0.1 Output Voltage VOUT (V) Output Voltage VOUT (V) 0.7 0 1.0 0.8 0.6 0.4 VIN=1.22V VIN=1.5V VIN=2.6V 0.2 0 0 100 200 300 400 500 600 700 800 Output Current IOUT (mA) 0 100 RP105x10xx VBIAS=5.25V 1.2 1.0 0.8 0.6 0.4 VIN=1.22V VIN=1.5V VIN=3.6V 0.2 0 Output Voltage VOUT (V) 1.2 Output Voltage VOUT (V) 900 RP105x10xx VBIAS=3.6V 1.0 0.8 0.6 0.4 VIN=1.22V VIN=1.5V VIN=5.25V 0.2 0 0 100 12 300 500 700 Output Current IOUT (mA) 300 500 700 Output Current IOUT (mA) 900 0 100 300 500 700 Output Current IOUT (mA) 900 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx RP105x15xx VBIAS=3.6V 1.6 1.4 1.4 Output Voltage VOUT (V) Output Voltage VOUT (V) VBIAS=3.1V 1.6 1.2 VIN=1.76V VIN=2.0V VIN=3.1V 1.0 0.8 0.6 0.4 0.2 0 1.2 VIN=1.76V VIN=2.0V VIN=3.6V 1.0 0.8 0.6 0.4 0.2 0 0 100 300 500 700 900 1000 Output Current IOUT (mA) 0 100 300 500 700 900 1000 Output Current IOUT (mA) RP105x15xx VBIAS=5.25V Output Voltage VOUT (V) 1.6 1.4 1.2 VIN=1.76V VIN=2.0V VIN=5.25V 1.0 0.8 0.6 0.4 0.2 0 0 100 300 500 700 900 1000 Output Current IOUT (mA) 2) Output Voltage vs. Input Voltage (CBIAS = 1.0 F, CIN = COUT = 2.2 F, Ta = 25C) RP105x06xx RP105x10xx VIN=1.1V VIN=1.5V 1.2 0.6 0.5 0.4 IOUT=1mA IOUT=30mA IOUT=50mA 0.3 0.2 0.1 0 Output Voltage VOUT (V) Output Voltage VOUT (V) 0.7 1.0 0.8 0.6 IOUT=1mA IOUT=30mA IOUT=50mA 0.4 0.2 0 0 1 2 3 4 Input Voltage VBIAS (V) 5 0 1 2 3 4 Input Voltage VBIAS (V) 5 13 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx RP105x06xB/D VBIAS=2.4V 0.7 1.6 0.6 Output Voltage VOUT (V) Output Voltage VOUT (V) VIN=2.0V 1.8 1.4 1.2 1.0 0.8 IOUT=1mA IOUT=30mA IOUT=50mA 0.6 0.4 0.2 0.5 0.4 IOUT=1mA IOUT=30mA IOUT=50mA 0.3 0.2 0.1 0 0 0 1 2 3 4 Input Voltage VBIAS (V) 0 5 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Input Voltage VIN (V) RP105x06xB/D RP105x06xB/D VBIAS=5.25V 0.7 0.6 0.6 Output Voltage VOUT (V) Output Voltage VOUT (V) VBIAS=3.6V 0.7 0.5 0.4 IOUT=1mA IOUT=30mA IOUT=50mA 0.3 0.2 0.1 0 0.5 0.4 IOUT=1mA IOUT=30mA IOUT=50mA 0.3 0.2 0.1 0 0 0.6 1.2 1.8 2.4 3.0 Input Voltage VIN (V) 3.6 0 0.5 RP105x10xB/D VBIAS=2.4V VBIAS=3.6V 1.2 1.0 0.8 0.6 IOUT=1mA IOUT=30mA IOUT=50mA 0.4 0.2 0 Output Voltage VOUT (V) Output Voltage VOUT (V) 5.25 RP105x10xB/D 1.2 1.0 0.8 0.6 IOUT=1mA IOUT=30mA IOUT=50mA 0.4 0.2 0 0 14 1.5 2.5 3.5 4.5 Input Voltage VIN (V) 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Input Voltage VIN (V) 0 0.6 1.2 1.8 2.4 3.0 Input Voltage VIN (V) 3.6 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x10xB/D RP105x15xB/D VBIAS=2.4V VBIAS=5.25V 1.6 Output Voltage VOUT (V) Output Voltage VOUT (V) 1.2 1.0 0.8 0.6 IOUT=1mA IOUT=30mA IOUT=50mA 0.4 0.2 0 1.4 1.2 1.0 0.8 IOUT=1mA IOUT=30mA IOUT=50mA 0.6 0.4 0.2 0 0 0.5 1.5 2.5 3.5 4.5 Input Voltage VIN (V) 5.25 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Input Voltage VIN (V) RP105x15xB/D RP105x15xB/D VBIAS=5.25V 1.6 1.4 1.4 1.2 1.0 0.8 IOUT=1mA IOUT=30mA IOUT=50mA 0.6 0.4 0.2 Output Voltage VOUT (V) Output Voltage VOUT (V) VBIAS=3.6V 1.6 0 0.6 1.2 1.8 2.4 3.0 Input Voltage VIN (V) RP105x06xE/F 0.8 IOUT=1mA IOUT=30mA IOUT=50mA 0.6 0.4 0.2 3.6 0 0.5 1.5 2.5 3.5 4.5 Input Voltage VIN (V) RP105x06xE/F VBIAS = 2.4V 0.7 0.6 5.25 VBIAS = 3.6V 0.6 0.5 0.4 0.3 IOUT = 1mA 0.2 IOUT = 30mA 0.1 IOUT = 50mA 0 Output Voltage VOUT [V] Output Voltage VOUT [V] 1.0 0 0 0.7 1.2 0.5 0.4 0.3 IOUT = 1mA 0.2 IOUT = 30mA 0.1 IOUT = 50mA 0 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Input Voltage VIN [V] 0 0.5 1 1.5 2 2.5 Input Voltage VIN [V] 3 3.5 15 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x06xE/F 0.7 RP105x10xE/F VBIAS = 5.25V 1.2 0.6 0.4 0.3 IOUT = 1mA 0.2 IOUT = 30mA 0.1 IOUT = 50mA Output Voltage VOUT [V] Output Voltage VOUT [V] 1 0.5 0 0.8 0.6 1.2 IOUT = 50mA 0.2 VBIAS = 3.6V 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Input Voltage VIN [V] RP105x10xE/F 1.2 VBIAS = 5.25V 1 0.8 Output Voltage VOUT [V] 1 Output Voltage VOUT [V] IOUT = 30mA 0 RP105x10xE/F 0.8 0.6 0.6 IOUT = 1mA 0.4 IOUT = 30mA IOUT = 50mA 0.2 IOUT = 1mA 0.4 IOUT = 30mA 0.2 IOUT = 50mA 0 0 0 0.5 1 1.5 2 2.5 Input Votlage VIN [V] RP105x15xE/F 1.6 3 3.5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Input Votlage VIN [V] RP105x15xE/F VBIAS = 2.4V 1.6 1.4 1.4 1.2 1.2 1 0.8 IOUT = 1mA 0.6 IOUT = 30mA 0.4 IOUT = 50mA 0.2 0 Output Voltage VOUT [V] Output Voltage VOUT [V] IOUT = 1mA 0.4 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Input Voltage VIN [V] VBIAS = 3.6V 1 0.8 IOUT = 1mA 0.6 IOUT = 30mA 0.4 IOUT = 50mA 0.2 0 0 16 VBIAS = 2.4V 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Input Voltage VIN [V] 0 0.5 1 1.5 2 2.5 Input Voltage VIN [V] 3 3.5 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xE/F 1.6 VBIAS = 5.25V 1.4 Output Voltage VOUT [V] 1.2 1 0.8 IOUT = 1mA 0.6 IOUT = 30mA 0.4 IOUT = 50mA 0.2 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Input Voltage VIN [V] 3) Supply Current vs. Input Voltage (CBIAS = CIN = COUT = none, Ta = 25C) RP105x06xB/D RP105x10xB/D VIN=1.5V 30 30 25 25 Supply Current ISS (A) Supply Current ISS (A) VIN=1.1V 20 15 10 5 0 20 15 10 5 0 0 1 2 3 4 Input Voltage VBIAS (V) 5 0 RP105x15xB/D 2 3 4 Input Voltage VBIAS (V) 5 RP105x06xB/D VIN=2.0V VBIAS=5.25V 30 12 25 10 Supply Current ISS (A) Supply Current ISS (A) 1 20 15 10 5 0 8 6 4 2 0 0 1 2 3 4 Input Voltage VBIAS (V) 5 0 0.5 1.5 2.5 3.5 4.5 Input Voltage VIN (V) 5.25 17 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x10xB/D RP105x15xB/D VBIAS=5.25V 12 10 10 Supply Current ISS (A) Supply Current ISS (A) VBIAS=5.25V 12 8 6 4 2 8 6 4 2 0 0 1.5 2.5 3.5 4.5 Input Voltage VIN (V) RP105x06xE/F 100 Supply Current ISS [A] 80 60 5.25 VBIAS = 5.25V VBIAS.pin 60 0 -20 5.25 VBIAS = 5.25V VIN.pin VBIAS.pin 40 20 0 -20 -40 -40 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Input Voltage VIN [V] RP105x15xE/F Supply Current ISS [A] 100 80 20 1.5 2.5 3.5 4.5 Input Voltage VIN (V) RP105x10xE/F VIN.pin 40 100 0 0.5 Supply Current ISS [A] 0 0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Input Voltage VIN [V] VBIAS = 5.25V 80 VIN.pin 60 VBIAS.pin 40 20 0 -20 -40 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Input Voltage VIN [V] In RP105xxxxE/F, the current flows from VBIAS pin to VIN pin via the inside IC when the input voltage VIN drops below the set output voltage VSET. 18 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 4) Output Voltage vs. Temperature (CBIAS = 1.0 F, CIN = COUT = 2.2 F, IOUT = 1 mA, VBIAS = 3.6 V) 0.65 0.64 0.63 0.62 0.61 0.60 0.59 0.58 0.57 0.56 0.55 -40 -25 RP105x10xx VIN=1.1V Output Voltage VOUT (V) Output Voltage VOUT (V) RP105x06xx 0 25 50 Temperature Topt (C) 75 85 1.05 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 0.96 0.95 -40 -25 VIN=1.5V 0 25 50 Temperature Topt (C) 75 85 Output Voltage VOUT (V) RP105x15xx 1.55 1.54 1.53 1.52 1.51 1.50 1.49 1.48 1.47 1.46 1.45 -40 -25 VIN=2.0V 0 25 50 Temperature Topt (C) 75 85 5) Supply Current vs. Temperature (CBIAS = CIN = COUT = none, VBIAS = 3.6 V) RP105x06xx VIN=1.1V 30 28 26 24 22 20 -40 -25 32 Supply Current ISS (A) Supply Current ISS (A) 32 RP105x10xx 0 25 50 Temperature Topt (C) 75 85 VIN=1.5V 30 28 26 24 22 20 -40 -25 0 25 50 Temperature Topt (C) 75 85 19 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx VIN=2.0V Supply Current ISS (A) 32 30 28 26 24 22 20 -40 -25 0 25 50 Temperature Topt (C) 75 85 6) Dropout Voltage vs. Output Current (CBIAS = 1.0 F, CIN = COUT = 2.2 F) RP105L101E/F RP105L061E/F VBIAS = 3.6V 160 140 Ta = -40C 120 Ta = 25C 100 Ta = 85C Drop-Out Voltage [mV] Drop-Out Voltage [mV] 140 Ta = 25C 100 80 60 40 20 Ta = 85C 80 60 40 20 0 0 50 100 150 200 250 300 350 400 RP105L151E/F VBIAS = 3.6V 160 140 Ta = -40C 120 Ta = 25C 100 Ta = 85C 80 60 40 20 0 0 50 100 150 200 250 300 Output Current IOUT [mA] 0 50 100 150 200 250 300 Output Current IOUT [mA] Output Current IOUT [mA] Drop-Out Voltage [mV] Ta = -40C 120 0 20 VBIAS = 3.6V 160 350 400 350 400 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 7) Ripple Rejection vs. Input Bias Voltage (COUT = 2.2 F, Ripple = 0.2 Vp-p, Ta = 25C) RP105x10xx RP105x10xx CBIAS=none, CIN=2.2F, IOUT=30mA 80 70 70 Ripple Rejection RR (dB) Ripple Rejection RR (dB) CBIAS=none, CIN=2.2F, IOUT=1mA 80 60 50 40 30 f=100Hz f=1kHz f=10kHz f=100kHz 20 10 0 2.4 2.9 60 50 40 30 10 0 2.4 3.4 3.9 4.4 4.9 Input Voltage VBIAS (V) f=100Hz f=1kHz f=10kHz f=100kHz 20 2.9 3.4 3.9 4.4 4.9 Input Voltage VBIAS (V) RP105x10xx RP105x10xx CBIAS=1.0F, CIN=none, IOUT=1mA f=100Hz f=1kHz f=10kHz f=100kHz 1 2 3 4 Input Voltage VIN (V) 100 90 80 70 60 50 40 30 20 10 0 Ripple Rejection RR (dB) Ripple Rejection RR (dB) 100 90 80 70 60 50 40 30 20 10 0 CBIAS=1.0F, CIN=none, IOUT=30mA 5 f=100Hz f=1kHz f=10kHz f=100kHz 1 2 3 4 Input Voltage VIN (V) 5 8) Ripple Rejection vs. Frequency (VBIAS = 3.6 V, COUT = 2.2 F, Ta = 25C) RP105x06xx 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=150mA 1 10 100 1000 Frequency f (kHz) 80 Ripple Rejection RR (dB) Ripple Rejection RR (dB) 80 RP105x10xx VIN=1.1V, CBIAS=none, CIN=2.2F 10000 VIN=1.5V, CBIAS=none, CIN=2.2F 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=150mA 1 10 100 1000 Frequency f (kHz) 10000 21 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx VIN=2.0V, CBIAS=none, CIN=2.2F 70 Ripple Rejection RR (dB) Ripple Rejection RR (dB) 80 RP105x06xx 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=150mA 1 10 100 1000 Frequency f (kHz) 10000 100 90 80 70 60 50 40 30 20 10 0 0.1 VIN=1.1V, CBIAS=1.0F, CIN=none IOUT=1mA IOUT=30mA 1 100 90 80 70 60 50 40 30 20 10 0 0.1 VIN=1.5V, CBIAS=1.0F, CIN=none IOUT=1mA IOUT=30mA 1 10000 RP105x15xx Ripple Rejection RR (dB) Ripple Rejection RR (dB) RP105x10xx 10 100 1000 Frequency f (kHz) 10 100 1000 Frequency f (kHz) 10000 100 90 80 70 60 50 40 30 20 10 0 0.1 VIN=2.0V, CBIAS=1.0F, CIN=none IOUT=1mA IOUT=30mA 1 10 100 1000 Frequency f (kHz) 10000 9) Input Transient Response (IOUT = 30 mA, COUT = 1.0 F, tr = tf = 5 s, Ta = 25C) RP105x10xx VIN=1.5V, CBIAS=none, CIN=2.2F VIN=1.1V, CBIAS=none, CIN=2.2F 0.64 2 Input Voltage(VBIAS) 2.4V 3.6V 0 0.60 Output Voltage 0.56 6 4 1.04 Input Voltage(VBIAS) 2.4V 3.6V 2 0 1.00 Output Voltage 0.96 0.92 0.52 0 22 Output Voltage VOUT (V) 4 Input Voltage VBIAS (V) Output Voltage VOUT (V) 6 40 80 160 Time t (s) 240 320 0 40 80 160 Time t (s) 240 320 Input Voltage VBIAS (V) RP105x06xx *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx RP105x06xx VIN=2.0V, CBIAS=none, CIN=2.2F VBIAS=3.6V, CBIAS=1.0F, CIN=none 1.54 0 1.50 Output Voltage 1.46 1.42 2 0.605 0 0.600 Output Voltage 0.595 0.590 240 320 0 40 80 160 Time t (s) RP105x10xx 240 320 RP105x15xx VBIAS=3.6V, CBIAS=1.0F, CIN=none VBIAS=3.6V, CBIAS=1.0F, CIN=none 3 1 0 1.005 1.000 Output Voltage 0.995 Output Voltage VOUT (V) Input Voltage(VIN) 1.5V 2.5V Input Voltage VBIAS (V) 2 4 0.990 3 2 Input Voltage(VIN) 2.0V 3.0V 1.505 1 1.500 Output Voltage 1.495 Input Voltage VBIAS (V) 0 40 80 160 Time t (s) Output Voltage VOUT (V) 1 Input Voltage(VIN) 1.1V 2.1V Input Voltage VBIAS (V) 2 Input Voltage(VBIAS) 2.4V 3.6V Output Voltage VOUT (V) 4 3 Input Voltage VBIAS (V) Output Voltage VOUT (V) 6 1.490 0 40 80 160 Time t (s) 240 320 0 40 80 160 Time t (s) 240 320 10) Load Transient Response (VBIAS = 3.6 V, CBIAS = 1.0 F, CIN = COUT = 2.2 F, tr = tf = 0.5 s, Ta = 25C) RP105x06xx RP105x10xx VIN=1.1V VIN=1.5V 50 0.605 0 0.600 0.595 Output Voltage 0.590 100 Output Current 50mA 100mA 50 1.005 0 1.000 0.995 Output Voltage Output Current IOUT (mA) Output Current 50mA 100mA Output Voltage VOUT (V) 100 150 Output Current IOUT (mA) Output Voltage VOUT (V) 150 0.990 0 200 400 Time t (s) 600 800 0 200 400 Time t (s) 600 800 23 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx RP105x06xx VIN=2.0V VIN=1.1V 50 1.505 0 1.500 1.495 Output Voltage 1.490 400 Output Current 1mA 400mA 0 0.65 0.60 0.55 Output Voltage 0.50 200 400 Time t (s) 600 800 0 RP105x10xx 200 400 Time t (s) 600 800 RP105x15xx VIN=1.5V VIN=2.0V Output Current 1mA 400mA 0 1.05 1.00 0.95 Output Voltage 0.90 Output Voltage VOUT (V) 400 800 Output Current IOUT (mA) 800 400 Output Current 1mA 400mA 0 1.55 1.50 1.45 Output Voltage Output Current IOUT (mA) 0 Output Voltage VOUT (V) Output Current IOUT (mA) Output Current 50mA 100mA Output Voltage VOUT (V) 100 800 Output Current IOUT (mA) Output Voltage VOUT (V) 150 1.40 0 200 400 Time t (s) 600 800 0 200 400 Time t (s) 600 800 11) Turn On Speed with CE pin (VBIAS = 3.6 V, CBIAS = 1.0 F, CIN = COUT = 2.2 F, Ta = 25C) RP105x06xx RP105x06xx VIN=1.1V IOUT=0mA VIN=1.1V IOUT=30mA 0 0.9 Output Voltage 0.6 0.3 0 2 0 0.9 Output Voltage 0.6 0.3 0 0 24 CE Input Voltage 20 40 Time t (s) 60 80 0 20 40 Time t (s) 60 80 CE Input Voltage VCE (V) 2 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x06xx RP105x10xx VIN=1.1V IOUT=400mA VIN=1.5V IOUT=0mA 0 0.9 Output Voltage 0.6 0.3 Output Voltage VOUT (V) 2 CE Input Voltage VCE (V) 0 CE Input Voltage 2 0 1.5 Output Voltage 1.0 0.5 0 20 40 Time t (s) 60 80 0 RP105x10xx 20 40 Time t (s) 60 80 RP105x10xx VIN=1.5V IOUT=30mA VIN=1.5V IOUT=400mA 2 0 1.5 Output Voltage 1.0 0.5 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 0 CE Input Voltage 2 0 1.5 Output Voltage 1.0 0.5 0 0 20 40 Time t (s) 60 80 0 RP105x15xx 20 40 Time t (s) 60 80 RP105x15xx VIN=2.0V IOUT=0mA VIN=2.0V IOUT=30mA 2 0 1.5 Output Voltage 1.0 0.5 0 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) 4 Output Voltage VOUT (V) CE Input Voltage VCE (V) 0 CE Input Voltage 2 0 1.5 Output Voltage 1.0 0.5 CE Input Voltage VCE (V) Output Voltage VOUT (V) CE Input Voltage CE Input Voltage VCE (V) 4 4 0 0 20 40 Time t (s) 60 80 0 20 40 Time t (s) 60 80 25 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x15xx VIN=2.0V IOUT=400mA CE Input Voltage 2 0 1.5 Output Voltage 1.0 0.5 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 0 0 20 40 Time t (s) 60 80 12) Turn Off Speed with CE Pin (VBIAS = 3.6 V, CBIAS = 1.0 F, CIN = COUT = 2.2 F, Ta = 25C) RP105x06xD/F RP105x06xD/F VIN=1.1V IOUT=0mA VIN=1.1V IOUT=30mA 0 0.9 0.6 Output Voltage 0.3 0 CE Input Voltage 0 0.9 0.6 Output Voltage 0.3 0 100 200 300 400 500 600 Time t (s) 0 RP105x06xD/F 100 200 300 400 500 600 Time t (s) RP105x10xD/F VIN=1.1V IOUT=400mA VIN=1.5V IOUT=0mA 2 0 0.9 0.6 Output Voltage 0.3 0 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 CE Input Voltage 2 0 1.5 1.0 Output Voltage 0.5 0 0 100 200 300 400 500 600 Time t (s) 0 100 200 300 400 500 600 Time t (s) CE Input Voltage VCE (V) 0 26 2 CE Input Voltage VCE (V) 2 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 RP105x10xD/F RP105x10xD/F VIN=1.5V IOUT=30mA VIN=1.5V IOUT=400mA 0 1.5 1.0 Output Voltage 0.5 0 CE Input Voltage 0 1.5 1.0 Output Voltage 0.5 0 100 200 300 400 500 600 Time t (s) 0 RP105x15xD/F 100 200 300 400 500 600 Time t (s) RP105x15xD/F VIN=2.0V IOUT=30mA VIN=2.0V IOUT=0mA 2 0 1.5 1.0 Output Voltage 0.5 0 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) 4 CE Input Voltage 2 0 1.5 1.0 Output Voltage 0.5 CE Input Voltage VCE (V) 0 Output Voltage VOUT (V) 2 CE Input Voltage VCE (V) 2 Output Voltage VOUT (V) CE Input Voltage 4 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 0 0 100 200 300 400 500 600 Time t (s) 0 100 200 300 400 500 600 Time t (s) RP105x15xD/F VIN=2.0V IOUT=400mA CE Input Voltage 2 0 1.5 1.0 Output Voltage 0.5 CE Input Voltage VCE (V) Output Voltage VOUT (V) 4 0 0 100 200 300 400 500 600 Time t (s) 27 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 13) Turn On Transient with VIN pin (VBIAS = 3.6 V, CBIAS = 1.0 F, CIN = none, COUT = 2.2 F, Ta = 25C) RP105x06xx RP105x06xx IOUT=0mA IOUT=30mA 0.9 Output Voltage 0.6 0.3 Output Voltage VOUT (V) 0 Input Voltage VIN (V) 0 1 VIN Input Voltage 0 0.9 Output Voltage 0.6 0.3 0 10 20 Time t (s) 30 40 0 RP105x10xx 10 20 Time t (s) 30 40 RP105x10xx IOUT=0mA IOUT=30mA 0 1.5 Output Voltage 1.0 0.5 Output Voltage VOUT (V) 1 VIN Input Voltage 2 Input Voltage VIN (V) Output Voltage VOUT (V) 2 0 1 VIN Input Voltage 0 1.5 Output Voltage 1.0 0.5 0 0 10 20 Time t (s) 30 40 0 RP105x15xx 10 20 Time t (s) 30 40 RP105x15xx IOUT=0mA IOUT=30mA 0 1.5 1.0 Output Voltage 0.5 0 Output Voltage VOUT (V) 2 VIN Input Voltage 4 Input Voltage VIN (V) Output Voltage VOUT (V) 4 2 VIN Input Voltage 0 1.5 1.0 Output Voltage 0.5 0 0 28 Input Voltage VIN (V) 0 10 20 Time t (s) 30 40 0 10 20 Time t (s) 30 40 Input Voltage VIN (V) Output Voltage VOUT (V) 1 VIN Input Voltage Input Voltage VIN (V) 2 2 *RP105Q (SC-88A) is the discontinued product as of April, 2018. No. EA-179-180419 ESR vs. Output Current Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low ESR also can be used. The relations between IOUT (Output Current) and ESR of an output capacitor are shown below. The conditions when the white noise level is under 40 V (Avg.) are marked as the hatched area in the graph. Measurement conditions Frequency Band : 10 Hz to 2 MHz Temperature : 40C to 85C Hatched Area : Noise level is under 40 V (Avg.) CBIAS, CIN : 1.0 F COUT : 2.2 F RP105x VBIAS=2.4V to 5.25V VIN=0.78V to 5.25V Topt=-40C to 85C 1000 ESR () 100 10 1 0.1 0.01 0 100 200 300 Output Current IOUT (mA) 400 29 POWER DISSIPATION DFN(PLP)1212-6 Ver. A The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm x 114.3 mm x 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes 0.2 mm x 14 pcs Measurement Result (Ta = 25C, Tjmax = 125C) Item Measurement Result Power Dissipation 450 mW Thermal Resistance (ja) ja = 218C/W Thermal Characterization Parameter (jt) jt = 105C/W ja: Junction-to-Ambient Thermal Resistance jt: Junction-to-Top Thermal Characterization Parameter 600 Power Dissipation (mW) 500 450 400 300 200 100 0 0 25 50 75 85 Ambient Temperature (C) 100 Power Dissipation vs. Ambient Temperature 125 Measurement Board Pattern i PACKAGE DIMENSIONS DFN(PLP)1212-6 Ver. B DFN(PLP)1212-6 Package Dimensions i POWER DISSIPATION SC-88A Ver. B The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following conditions are used in this measurement. Measurement Conditions Item Standard Test Land Pattern Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Double-Sided Board) Board Dimensions 40 mm x 40 mm x 1.6 mm Top Side: Approx. 50% Copper Ratio Bottom Side: Approx. 50% 0.5 mm x 44 pcs Through-holes Measurement Result (Ta = 25C, Tjmax = 125C) Item Standard Test Land Pattern Power Dissipation 380 mW Thermal Resistance (ja) ja = 263C/W Thermal Characterization Parameter (jt) jt = 75C/W ja: Junction-to-Ambient Thermal Resistance jt: Junction-to-Top Thermal Characterization Parameter 500 40 380 300 40 Power Dissipation (mW) 400 200 100 0 0 25 50 75 85 100 125 Ambient Temperature (C) Power Dissipation vs. Ambient Temperature Measurement Board Pattern i PACKAGE DIMENSIONS SC-88A Ver. A SC-88A Package Dimensions i POWER DISSIPATION SOT-23-5 Ver. A The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm x 114.3 mm x 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes 0.3 mm x 7 pcs Measurement Result Item (Ta = 25C, Tjmax = 125C) Measurement Result Power Dissipation 660 mW Thermal Resistance (ja) ja = 150C/W Thermal Characterization Parameter (jt) jt = 51C/W ja: Junction-to-Ambient Thermal Resistance jt: Junction-to-Top Thermal Characterization Parameter Power Dissipation vs. Ambient Temperature Measurement Board Pattern i SOT-23-5 PACKAGE DIMENSIONS Ver. A 2.90.2 1.10.1 1.90.2 0.80.1 (0.95) 4 1 2 00.1 0.2min. +0.2 1.6-0.1 5 2.80.3 (0.95) 3 0.40.1 +0.1 0.15-0.05 SOT-23-5 Package Dimensions i POWER DISSIPATION DFN1212-5 Ver. A The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm x 114.3 mm x 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes 0.2 mm x 14 pcs Measurement Result (Ta = 25C, Tjmax = 125C) Item Measurement Result Power Dissipation 560 mW Thermal Resistance (ja) ja = 178C/W Thermal Characterization Parameter (jt) jt = 105C/W ja: Junction-to-Ambient Thermal Resistance jt: Junction-to-Top Thermal Characterization Parameter 600 560 Power Dissipation (mW) 500 400 300 200 100 0 0 25 50 75 85 100 Ambient Temperature (C) 125 Power Dissipation vs. Ambient Temperature Measurement Board Pattern i PACKAGE DIMENSIONS DFN1212-5 Ver. A DFN1212-5 Package Dimensions (Unit: mm) i