IDC Systems
Headers
PRODUCT DESCRIPTION
PCB Male Headers provide reliability,
convenience and positive polarization
when mated with Female Socket
Transition Connectors in PC board
applications which require repeated
connection and disconnection.
Optional retainer-ejector latches
easily disengage the header and
female socket, eliminating stress in
the cable termination and solder joint
areas during disconnect.
DESIGN ADVANTAGES
• Industry standard polarization
mates with center bump as well as
dual slot polarized female socket
connectors.
• Available in .050 x .100, .100 x
.100, .100 x .200 and .100 x .300
center spacing.
• Available in standard, low profile,
vertical eject, compliant pin and
surface mount configurations.
• Available in high temperature
materials.
17
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
HEADERS
LR92984 E60980
HEADER INDEX
.050" x .100" 2-Row Straight Tail ............................................18
.050" x .100" 2-Row Right Angle Tails ....................................20
.050" x .100" 4-Row Right Angle Tails ....................................22
.050" x .100" 2-Row Unshrouded Header, Straight ................24
.050" x .100" 2-Row Unshrouded Header, Right Angle ..........25
.100" x .100" Straight Standard Header..................................26
.100" x .100" Right Angle Standard Header............................27
.100" x .100" High Temp. Straight Standard Header ..............28
.100" x .100" High Temp. Right Angle Standard Header ........29
.100" x .100" Low Profile Straight w/ejectors ........................30
.100" x .100" Low Profile Right Angle w/ejectors ..................31
.100" x .100" Low Profile Straight ..........................................32
.100" x .100" Low Profile Right Angle ....................................33
.100" x .100" Low Profile Straight, High Temp. ......................34
.100" x .100" Low Profile Right Angle, High Temp. ................35
.100" x .100" Low Profile Straight w/latches ..........................36
.100" x .100" Low Profile Right Angle w/latches ..................37
.100" x .100" Flex-Fit™ with Retainer/Ejector ........................38
.100" x .100" Flex-Fit™ Low Profile ......................................39
.100" x .100" Surface Mount ..................................................40
Pin Strip Headers, Single Row Straight ................................41
Pin Strip Headers, Single Row Right Angle ..........................42
Pin Strip Headers, Dual Row Straight ....................................43
Pin Strip Headers, Dual Row Right Angle ............................44
Dip Socket Headers, 14 and 16 Positions ............................45
Accessories..............................................................................46
IDC Systems
Headers
26
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
STRAIGHT
STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
: See page 46
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
PCB 1.57MM (.062) PCB 3.18 MM(.125) WIREWRAP NO.
D=2.9MM (.114) D=4.48MM (.176) D=15.5MM (.610) OF A B C
STRAIGHT STRAIGHT STRAIGHT POS.
609-0624 609-0634 609-0654 6 27.05 (1.07) 22.86 (.90) 16.76 (.66)
609-1024 609-1034 609-1054 10 32.13 (1.26) 27.94 (1.10) 21.64 (.85)
609-1224 609-1234 609-1254 12 34.64 (1.36) 30.48 (1.20) 24.38 (.96)
609-1424 609-1434 609-1454 14 37.21 (1.46) 33.02 (1.30) 26.92 (1.06)
609-1624 609-1634 609-1654 16 39.75 (1.56) 35.56 (1.40) 29.46 (1.16)
609-2024 609-2034 609-2054 20 44.83 (1.76) 40.64 (1.60) 34.54 (1.36)
609-2424 609-2434 609-2454 24 49.88 (1.96) 45.72 (1.80) 39.62 (1.56)
609-2624 609-2634 609-2654 26 52.45 (2.06) 48.26 (1.90) 42.16 (1.66)
609-3024 609-3034 609-3054 30 57.50 (2.26) 53.34 (2.10) 47.26 (1.86)
609-3424 609-3434 609-3454 34 62.61 (2.46) 58.42 (2.30) 52.32 (2.06)
609 3624 609-3634 609-3654 36 65.12 (2.56) 60.96 (2.40) 54.86 (2.16)
609-4024 609-4034 609-4054 40 70.23 (2.76) 66.04 (2.60) 59.94 (2.36)
609-4424 609-4434 609-4454 44 75.31 (2.96) 71.12 (2.80) 65.02 (2.56)
609-5024 609-5034 609-5054 50 82.93 (3.26) 78.74 (3.10) 72.64 (2.86)
609-6024 609-6034 609-6054 60 95.63 (3.76) 91.44 (3.60) 85.35 (3.36)
609-6424 609-6434 609-6454 64 100.71 (3.96) 96.52 (3.80) 90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
609 - XX XX
# of Positions E (Ejector)
ES Ejector for
Strain Relief
Tail Style
R (PCB Retention)
IDC Systems
Headers
27
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
RIGHT ANGLE
STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
: See page 46
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
PCB 1.57MM (.062) PCB 3.18 MM(.125) WIREWRAP NO.
D=2.9MM (.114) D=4.48MM (.176) D=15.5MM (.610) OF A B C
RIGHT ANGLE RIGHT ANGLE RIGHT ANGLE POS.
609-0604 609-0614 609-0644 6 27.05 (1.07) 22.86 (.90) 16.76 (.66)
609-1004 609-1014 609-1044 10 32.13 (1.26) 27.94 (1.10) 21.64 (.85)
609-1204 609-1214 609-1244 12 34.64 (1.36) 30.48 (1.20) 24.38 (.96)
609-1404 609-1414 609-1444 14 37.21 (1.46) 33.02 (1.30) 26.92 (1.06)
609-1604 609-1614 609-1644 16 39.75 (1.56) 35.56 (1.40) 29.46 (1.16)
609-2004 609-2014 609-2044 20 44.83 (1.76) 40.64 (1.60) 34.54 (1.36)
609-2404 609-2414 609-2444 24 49.88 (1.96) 45.72 (1.80) 39.62 (1.56)
609-2604 609-2614 609-2644 26 52.45 (2.06) 48.26 (1.90) 42.16 (1.66)
609-3004 609-3014 609-3044 30 57.50 (2.26) 53.34 (2.10) 47.26 (1.86)
609-3404 609-3414 609-3444 34 62.61 (2.46) 58.42 (2.30) 52.32 (2.06)
609-3604 609-3614 609-3644 36 65.12 (2.56) 60.96 (2.40) 54.86 (2.16)
609-4004 609-4014 609-4044 40 70.23 (2.76) 66.04 (2.60) 59.94 (2.36)
609-4404 609-4414 609-4444 44 75.31 (2.96) 71.12 (2.80) 65.02 (2.56)
609-5004 609-5014 609-5044 50 82.93 (3.26) 78.74 (3.10) 72.64 (2.86)
609-6004 609-6014 609-6044 60 95.63 (3.76) 91.44 (3.60) 85.35 (3.36)
609-6404 609-6414 609-6444 64 100.71 (3.96) 96.52 (3.80) 90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
609 - XX XX
# of Positions E (Ejector)
ES Ejector for
Strain Relief
Tail Style
R (PCB Retention)
IDC Systems
Headers
28
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
HIGH TEMPERATURE STRAIGHT
STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR LATCHES
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0, Infrared and vapor phase
process compatible
C
OLOR
:Black
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
S
OLDER
R
EFLOW
T
EMPERATURE
R
ATING
:-109˚C To
245°C (275° for 30 sec., depending on reflow profile)
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
: See page 46
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
PCB 1.57MM (.062) PCB 3.18 MM(.125) WIREWRAP NO.
D=2.9MM (.114) D=4.48MM (.176) D=15.5MM (.610) OF A B C
STRAIGHT STRAIGHT STRAIGHT POS.
609-0624**HT 609-0634**HT 609-0654**HT 6 27.05 (1.07) 22.86 (.90) 16.76 (.66)
609-1024**HT 609-1034**HT 609-1054**HT 10 32.13 (1.26) 27.94 (1.10) 21.64 (.85)
609-1224**HT 609-1234**HT 609-1254**HT 12 34.64 (1.36) 30.48 (1.20) 24.38 (.96)
609-1424**HT 609-1434**HT 609-1454**HT 14 37.21 (1.46) 33.02 (1.30) 26.92 (1.06)
609-1624**HT 609-1634**HT 609-1654**HT 16 39.75 (1.56) 35.56 (1.40) 29.46 (1.16)
609-2024**HT 609-2034**HT 609-2054**HT 20 44.83 (1.76) 40.64 (1.60) 34.54 (1.36)
609-2424**HT 609-2434**HT 609-2454**HT 24 49.88 (1.96) 45.72 (1.80) 39.62 (1.56)
609-2624**HT 609-2634**HT 609-2654**HT 26 52.45 (2.06) 48.26 (1.90) 42.16 (1.66)
609-3024**HT 609-3034**HT 609-3054**HT 30 57.50 (2.26) 53.34 (2.10) 47.26 (1.86)
609-3424**HT 609-3434**HT 609-3454**HT 34 62.61 (2.46) 58.42 (2.30) 52.32 (2.06)
609 3624**HT 609-3634**HT 609-3654**HT 36 65.12 (2.56) 60.96 (2.40) 54.86 (2.16)
609-4024**HT 609-4034**HT 609-4054**HT 40 70.23 (2.76) 66.04 (2.60) 59.94 (2.36)
609-4424**HT 609-4434**HT 609-4454**HT 44 75.31 (2.96) 71.12 (2.80) 65.02 (2.56)
609-5024**HT 609-5034**HT 609-5054**HT 50 82.93 (3.26) 78.74 (3.10) 72.64 (2.86)
609-6024**HT 609-6034**HT 609-6054**HT 60 95.63 (3.76) 91.44 (3.60) 85.35 (3.36)
609-6424**HT 609-6434**HT 609-6454**HT 64 100.71 (3.96) 96.52 (3.80) 90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
609 - XX XX
# of Positions
E (Ejector)
ES Ejector for Strain Relief
Tail Style
R (PCB Retention)
HT
High Temp
IDC Systems
Headers
29
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
HIGH TEMPERATURE
RIGHT ANGLE STANDARD HEADERS
WITH AND WITHOUT
RETAINER/EJECTOR LATCHES
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0, Infrared and vapor phase
process compatible
C
OLOR
:Black
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating;
.025 Sq. pin w/coined edges
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
: See page 46
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
PCB 1.57MM (.062) PCB 3.18 MM(.125) WIREWRAP NO.
D=2.9MM (.114) D=4.48MM (.176) D=15.5MM (.610) OF A B C
RIGHT ANGLE RIGHT ANGLE RIGHT ANGLE POS.
609-0604**HT 609-0614**HT 609-0644**HT 6 27.05 (1.07) 22.86 (.90) 16.76 (.66)
609-1004**HT 609-1014**HT 609-1044**HT 10 32.13 (1.26) 27.94 (1.10) 21.64 (.85)
609-1204**HT 609-1214**HT 609-1244**HT 12 34.64 (1.36) 30.48 (1.20) 24.38 (.96)
609-1404**HT 609-1414**HT 609-1444**HT 14 37.21 (1.46) 33.02 (1.30) 26.92 (1.06)
609-1604**HT 609-1614**HT 609-1644**HT 16 39.75 (1.56) 35.56 (1.40) 29.46 (1.16)
609-2004**HT 609-2014**HT 609-2044**HT 20 44.83 (1.76) 40.64 (1.60) 34.54 (1.36)
609-2404**HT 609-2414**HT 609-2444**HT 24 49.88 (1.96) 45.72 (1.80) 39.62 (1.56)
609-2604**HT 609-2614**HT 609-2644**HT 26 52.45 (2.06) 48.26 (1.90) 42.16 (1.66)
609-3004**HT 609-3014**HT 609-3044**HT 30 57.50 (2.26) 53.34 (2.10) 47.26 (1.86)
609-3404**HT 609-3414**HT 609-3444**HT 34 62.61 (2.46) 58.42 (2.30) 52.32 (2.06)
609-3604**HT 609-3614**HT 609-3644**HT 36 65.12 (2.56) 60.96 (2.40) 54.86 (2.16)
609-4004**HT 609-4014**HT 609-4044**HT 40 70.23 (2.76) 66.04 (2.60) 59.94 (2.36)
609-4404**HT 609-4414**HT 609-4444**HT 44 75.31 (2.96) 71.12 (2.80) 65.02 (2.56)
609-5004**HT 609-5014**HT 609-5044**HT 50 82.93 (3.26) 78.74 (3.10) 72.64 (2.86)
609-6004**HT 609-6014**HT 609-6044**HT 60 95.63 (3.76) 91.44 (3.60) 85.35 (3.36)
609-6404**HT 609-6414**HT 609-6444**HT 64 100.71 (3.96) 96.52 (3.80) 90.42 (3.56)
** Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
609 - XX XX
# of Positions
E (Ejector)
ES Ejector for Strain Relief
Tail Style
R (PCB Retention)
HT
High Temp
LOW PROFILE HEADERS
WITH VERTICAL
RETAINER/EJECTOR
LATCHES, STRAIGHT PINS
.100" x .100" CENTERS
IDC Systems
Headers
30
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel plating
.025 Sq. pin w/coined edges
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTOR
F
EMALE
S
OCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
:See page 46
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSION “D” IN MM (INCHES) NO.
2.59 (.102) 4.19 (.165) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) POS.
P.C. BOARDS P.C. BOARDS
501-0627XX 501-0637XX 6 15.24 (.600) 7.11 (.280) 5.08 (.200)
501-1027XX 501-1037XX 10 20.32 (.800) 12.19 (.480) 10.16 (.400)
501-1227XX 501-1237XX 12 22.86 (.900) 14.73 (.580) 12.70 (.500)
501-1427XX 501-1437XX 14 25.40 (1.000) 17.27 (.680) 15.24 (.600)
501-1627XX 501-1637XX 16 27.94 (1.100) 19.81 (.780) 17.78 (.700)
501-2027XX 501-2037XX 20 33.02 (1.300) 24.89 (.980) 22.86 (.900)
501-2427XX 501-2437XX 24 38.10 (1.500) 29.97 (1.180) 27.94 (1.100)
501-2627XX 501-2637XX 26 40.64 (1.600) 32.51 (1.280) 30.48 (1.200)
501-3027XX 501-3037XX 30 45.72 (1.800) 37.59 (1.480) 35.56 (1.400)
501-3427XX 501-3437XX 34 50.80 (2.000) 42.67 (1.680) 40.64 (1.600)
501-3627XX 501-3637XX 36 53.34 (2.100) 45.21 (1.780) 43.18 (1.700)
501-4027XX 501-4037XX 40 58.42 (2.300) 50.29 (1.980) 48.26 (1.900)
501-4427XX 501-4437XX 44 63.50 (2.500) 55.37 (2.180) 53.34 (2.100)
501-5027XX 501-5037XX 50 71.12 (2.800) 62.99 (2.480) 60.96 (2.400)
501-6027XX 501-6037XX 60 83.82 (3.300) 75.69 (2.980) 73.66 (2.900)
501-6427XX 501-6437XX 64 88.90 (3.500) 80.77 (3.180) 78.74 (3.100)
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
501 - XX XX
# of Positions
E (Ejector)
ES Ejector for Strain Relief
Tail Style
R (PCB Retention)
LOW PROFILE
HEADERS WITH VERTICAL
RETAINER/EJECTOR
LATCHES, RIGHT ANGLE PINS
.100" x .100" CENTERS
IDC Systems
Headers
31
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ inches
min. gold over 50µ inches min. nickel plating
.025 Sq. pin w/coined edges
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
: See page 46
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSION “D” IN MM (INCHES) NO.
2.59 (.102) 4.19 (.165) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) POS.
P.C. BOARDS P.C. BOARDS
501-0607XX 501-0617XX 6 15.24 (.600) 7.11 (.280) 5.08 (.200)
501-1007XX 501-1017XX 10 20.32 (.800) 12.19 (.480) 10.16 (.400)
501-1207XX 501-1217XX 12 22.86 (.900) 14.73 (.580) 12.70 (.500)
501-1407XX 501-1417XX 14 25.40 (1.000) 17.27 (.680) 15.24 (.600)
501-1607XX 501-1617XX 16 27.94 (1.100) 19.81 (.780) 17.78 (.700)
501-2007XX 501-2017XX 20 33.02 (1.300) 24.89 (.980) 22.86 (.900)
501-2407XX 501-2417XX 24 38.10 (1.500) 29.97 (1.180) 27.94 (1.100)
501-2607XX 501-2617XX 26 40.64 (1.600) 32.51 (1.280) 30.48 (1.200)
501-3007XX 501-3017XX 30 45.72 (1.800) 37.59 (1.480) 35.56 (1.400)
501-3407XX 501-3417XX 34 50.80 (2.000) 42.67 (1.680) 40.64 (1.600)
501-3607XX 501-3617XX 36 53.34 (2.100) 45.21 (1.780) 43.18 (1.700)
501-4007XX 501-4017XX 40 58.42 (2.300) 50.29 (1.980) 48.26 (1.900)
501-4407XX 501-4417XX 44 63.50 (2.500) 55.37 (2.180) 53.34 (2.100)
501-5007XX 501-5017XX 50 71.12 (2.800) 62.99 (2.480) 60.96 (2.400)
501-6007XX 501-6017XX 60 83.82 (3.300) 75.69 (2.980) 73.66 (2.900)
501-6407XX 501-6417XX 64 88.90 (3.500) 80.77 (3.180) 78.74 (3.100)
501 - XX XX
# of Positions
E (Ejector)
ES Ejector for Strain Relief
Tail Style
R (PCB Retention)
IDC Systems
Headers
32
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LOW PROFILE BOX HEADERS
STRAIGHT PINS
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel
plating
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
HOLE DIA. ±.08 (±.003) TYPE OF CONTACT
AFTER PLATING
.89 (.035) PCB Solder Tails
1.14 (.045) Wrap Post Tails
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSION “D” IN MM (INCHES) NO.
2.59 (.102) 4.19 (.165) 15.49 (.610) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) WRAP POST POS.
P.C. BOARDS P.C. BOARDS TAILS
609-0627 609-0637 609-0657 6 15.24 (600) 12.70 (.500) 5.80 (.200)
609-0827 609-0837 609-0857 8 17.78 (.700) 15.24 (.600) 7.62 (.300)
609-1027 609-1037 609-1057 10 20.32 (.800) 17.78 (.700) 10.16 (.400)
609-1227 609-1237 609-1257 12 22.86 (.900) 20.32 (.800) 17.70 (.500)
609-1427 609-1437 609-1457 14 25.40 (1.000) 22.86 (.900) 15.24 (.600)
609-1627 609-1637 609-1657 16 27.94 (1.100) 25.40 (1.000) 17.75 (. 700)
609-2027 609-2037 609-2057 20 33.02 (1.300) 30.48 (1.200) 22.86 (.900)
609-2427 609-2437 609-2457 24 38.10 (1.500) 35.56 (1.400) 27.94 (1.100)
609-2627 609-2637 609-2657 26 40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
609-3027 609-3037 609-3057 30 45.72 (1.800) 43.18 (1.700) 35.56 (1.400)
609-3427 609-3437 609-3457 34 50.80 (2.000) 48.26 (1.900) 40.64 (1.600)
609-3627 609-3637 609-3657 36 53.34 (2.100) 50.80 (2.000) 43.18 (1.700)
609-4027 609-4037 609-4057 40 58.42 (2.300) 55.88 (2.200) 48.26 (1.900)
609-4427 609-4437 609-4457 44 63.50 (2.500) 60.96 (2.400) 53.34 (2.100)
609-5027 609-5037 609-5057 50 71.12 (2.800) 68.58 (2.700) 60.96 (2.400)
609-5627 609-5637 609-5657 56 78.74 (3.100) 76.20 (3.000) 68.58 (2.700)
609-6027 609-6037 609-6057 60 83.82 (3.300) 81.28 (3.200) 73.66 (2.900)
609-6427 609-6437 609-6457 64 88.90 (3.500) 86.36 (3.400) 78.74 (3.100)
LOW PROFILE BOX HEADERS
RIGHT ANGLE PINS
.100" x .100" CENTERS
IDC Systems
Headers
33
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel
plating
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C To 125°C
A
PPLICATION
R
EFLOW
T
EMPERATURE
R
ATING
:-55˚C To
125°C
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSION “D” IN MM (INCHES) NO.
2.59 (.102) 4.19 (.165) 15.49 (.610) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) WRAP POST POS.
P.C. BOARDS P.C. BOARDS TAILS
609-0607 609-0617 609-0647 6 15.24 (600) 12.70 (.500) 5.80 (.200)
609-0807 609-0817 609-0847 8 17.78 (.700) 15.24 (.600) 7.62 (.300)
609-1007 609-1017 609-1047 10 20.32 (.800) 17.78 (.700) 10.16 (.400)
609-1207 609-1217 609-1247 12 22.86 (.900) 20.32 (.800) 17.70 (.500)
609-1407 609-1417 609-1447 14 25.40 (1.000) 22.86 (.900) 15.24 (.600)
609-1607 609-1617 609-1647 16 27.94 (1.100) 25.40 (1.000) 17.75 (. 700)
609-2007 609-2017 609-2047 20 33.02 (1.300) 30.48 (1.200) 22.86 (.900)
609-2407 609-2417 609-2447 24 38.10 (1.500) 35.56 (1.400) 27.94 (1.100)
609-2607 609-2617 609-2647 26 40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
609-3007 609-3017 609-3047 30 45.72 (1.800) 43.18 (1.700) 35.56 (1.400)
609-3407 609-3417 609-3447 34 50.80 (2.000) 48.26 (1.900) 40.64 (1.600)
609-3607 609-3617 609-3647 36 53.34 (2.100) 50.80 (2.000) 43.18 (1.700)
609-4007 609-4017 609-4047 40 58.42 (2.300) 55.88 (2.200) 48.26 (1.900)
609-4407 609-4417 609-4447 44 63.50 (2.500) 60.96 (2.400) 53.34 (2.100)
609-5007 609-5017 609-5047 50 71.12 (2.800) 68.58 (2.700) 60.96 (2.400)
609-5607 609-5617 609-5647 56 78.74 (3.100) 76.20 (3.000) 68.58 (2.700)
609-6007 609-6017 609-6047 60 83.82 (3.300) 81.28 (3.200) 73.66 (2.900)
609-6407 609-6417 609-6447 64 88.90 (3.500) 86.36 (3.400) 78.74 (3.100)
HOLE DIA. ±.08 (±.003) TYPE OF CONTACT
AFTER PLATING
.89 (.035) PCB Solder Tails
1.14 (.045) Wrap Post Tails
IDC Systems
Headers
34
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
HIGH TEMPERATURE
LOW PROFILE HEADERS
STRAIGHT PINS
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0, infrared & vapor phase process
compatible.
C
OLOR
:Black
C
ONTACT
M
ATERIAL
:Brass with 15µ inches min.
gold over 50µ inches min. nickel plating
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C To 125°C
S
OLDER
R
EFLOW
T
EMPERATURE
R
ATING
:190˚C To 245°C
(275° for 30 sec., depending on reflow profile)
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSION “D” IN MM (INCHES) NO.
2.90 (.114) 4.19 (.165) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) POS.
P.C. BOARDS P.C. BOARDS
636-1027 636-1037 10 20.32 (.800) 17.78 (.700) 10.16 (.400)
636-1427 636-1437 14 25.40 (1.000) 22.86 (.900) 15.24 (.600)
636-1627 636-1637 16 27.94 (1.100) 25.40 (1.000) 17.75 (. 700)
636-2027 636-2037 20 33.02 (1.300) 30.48 (1.200) 22.86 (.900)
636-2627 636-2637 26 40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
636-3427 636-3437 34 50.80 (2.000) 48.26 (1.900) 40.64 (1.600)
636-4027 636-4037 40 58.42 (2.300) 55.88 (2.200) 48.26 (1.900)
636-5027 636-5037 50 71.12 (2.800) 68.58 (2.700) 60.96 (2.400)
636-6027 636-6037 60 83.82 (3.300) 81.28 (3.200) 73.66 (2.900)
.040±.003 After Plating
IDC Systems
Headers
35
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
HIGH TEMPERATURE
LOW PROFILE HEADERS
RIGHT ANGLE PINS
.100" x .100" CENTERS
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0, infrared & vapor phase process
compatible.
C
OLOR
:Black
C
ONTACT
M
ATERIAL
:Brass with 15µ inches min.
gold over 50µ inches min. nickel plating
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
S
OLDER
R
EFLOW
T
EMPERATURE
R
ATING
:190˚C To 245°C
(275° for 30 sec., depending on reflow profile)
M
ATING
C
ONNECTORS
F
EMALE
S
OCKETS
:See pages 9-13
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSION “D” IN MM (INCHES) NO.
2.90 (.114) 4.19 (.165) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) POS.
P.C. BOARDS P.C. BOARDS
636-1007 636-1017 10 20.32 (.800) 17.78 (.700) 10.16 (.400)
636-1407 636-1417 14 25.40 (1.000) 22.86 (.900) 15.24 (.600)
636-1607 636-1617 16 27.94 (1.100) 25.40 (1.000) 17.75 (. 700)
636-2007 636-2017 20 33.02 (1.300) 30.48 (1.200) 22.86 (.900)
636-2607 636-2617 26 40.64 (1.6001 38.10 (1.5001 30.48 (1.2001
636-3407 636-3417 34 50.80 (2.000) 48.26 (1.900) 40.64 (1.600)
636-4007 636-4017 40 58.42 (2.300) 55.88 (2.200) 48.26 (1.900)
636-5007 636-5017 50 71.12 (2.800) 68.58 (2.700) 60.96 (2.400)
636-6007 636-6017 60 83.82 (3.300) 81.28 (3.200) 73.66 (2.900)
.040±.003 After Plating
LOW PROFILE HEADERS
STRAIGHT PINS WITH
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
IDC Systems
Headers
36
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSIONS “D” IN MM (INCHES) NO.
2.59 (.102) 4.19 (.165) 15.49 (.610) OF A B C
FOR 1.57 (.062) FOR 3.18 (.125) WRAP POST POS.
P.C. BOARDS P.C. BOARDS TAILS
609-0827XX 609-0837XX 609-0857XX 8 29.21 (1.150) 15.24 (.600) 7.26 (.300)
609-1027XX 609-1037XX 609-1057XX 10 31.75 (1.250) 17.78 (.700) 10.16 (.400)
609-1227XX 609-1237XX 609-1257XX 12 34.29 (1.350) 20.32 (.800) 17.70 (.500)
609-1427XX 609-1437XX 609-1457XX 14 36.83 (1.450) 22.86 (.900) 15.24 (.600)
609-1627XX 609-1637XX 609-1657XX 16 39.37 (1.550) 25.40 (1.000) 17.78 (. 700)
609-2027XX 609-2037XX 609-2057XX 20 44.45 (1.750) 30.48 (1.200) 22.86 (.900)
609-2427XX 609-2437XX 609-2457XX 24 49.53 (1.950) 35.55 (1.400) 27.94 (1.100)
609-2627XX 609-2637XX 609-2657XX 26 52.07 (2.050) 38.10 (1.5001 30.48 (1.2001
609-3027XX 609-3037XX 609-3057XX 30 57.15 (2.250) 43.18 (1.700) 35.56 (1.400)
609-3427XX 609-3437XX 609-3457XX 34 62.23 (2.450) 48.26 (1.900) 40.64 (1.600)
609-3627XX 609-3637XX 609-3657XX 36 64.77 (2.550) 50.80 (2.000) 43.18 (1 .700)
609-4027XX 609-4037XX 609-4057XX 40 69.85 (2.750) 55.88 (2.200) 48.26 (1.900)
609-4427XX 609-4437XX 609-4457XX 44 74.93 (2.950) 60.96 (2.400) 53.34 (2.100)
609-5027XX 609-5037XX 609-5057XX 50 82.55 (3.250) 68.58 (2.700) 60.96 (2.400)
609-5627XX 609-5637XX 609-5657XX 56 90.17 (3.550) 76.20 (3.000) 68.58 (2.700)
609-6027XX 609-6037XX 609-6057XX 60 95.25 (3.750) 81.28 (3.200) 73.66 (2.900)
609-6427XX 609-6437XX 609-6457XX 64 100.33 (3.950) 86.36 (3.400) 78.74 (3.100)
HOLE DIA.
±.08 (±.003)
AFTER PLATING TYPE OF CONTACT
.89 (.035) PCB Solder Tails
1.14 (.045) Wrap Post Tails
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE SOCKETS
:See pages 9-13
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
609 - XX XX
# of Positions
E (Ejector)
ES Ejector for Strain Relief
Tail Style
R (PCB Retention)
IDC Systems
Headers
37
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LOW PROFILE HEADERS
RIGHT ANGLE PINS WITH
RETAINER/EJECTOR
LATCHES
.100" x .100" CENTERS
LR92984 E60980
Ordering Information
CATALOG NUMBERS DIMENSIONS IN MM (INCHES)
DIMENSIONS “D” IN MM (INCHES) NO.
2.59 (.102) 4.19 (.165) 15.49 (.610) OF A B C
1.57 (.062) 3.18 (.125) WRAP POST POS.
P.C. BOARDS P.C. BOARDS TAILS
609-0807XX 609-0817XX 609-0847XX 8 29.21 (1.150) 15.24 (.600) 7.26 (.300)
609-1007XX 609-1017XX 609-1047XX 10 31.75 (1.250) 17.78 (.700) 10.16 (.400)
609-1207XX 609-1217XX 609-1247XX 12 34.29 (1.350) 20.32 (.800) 17.70 (.500)
609-1407XX 609-1417XX 609-1447XX 14 36.83 (1.450) 22.86 (.900) 15.24 (.600)
609-1607XX 609-1617XX 609-1647XX 16 39.37 (1.550) 25.40 (1.000) 17.78 (. 700)
609-2007XX 609-2017XX 609-2047XX 20 44.45 (1.750) 30.48 (1.200) 22.86 (.900)
609-2407XX 609-2417XX 609-2447XX 24 49.53 (1.950) 35.55 (1.400) 27.94 (1.100)
609-2607XX 609-2617XX 609-2647XX 26 52.07 (2.050) 38.10 (1.500) 30.48 (1.200)
609-3007XX 609-3017XX 609-3047XX 30 57.15 (2.250) 43.18 (1.700) 35.56 (1.400)
609-3407XX 609-3417XX 609-3447XX 34 62.23 (2.450) 48.26 (1.900) 40.64 (1.600)
609-3607XX 609-3617XX 609-3647XX 36 64.77 (2.550) 50.80 (2.000) 43.18 (1 .700)
609-4007XX 609-4017XX 609-4047XX 40 69.85 (2.750) 55.88 (2.200) 48.26 (1.900)
609-4407XX 609-4417XX 609-4447XX 44 74.93 (2.950) 60.96 (2.400) 53.34 (2.100)
609-5007XX 609-5017XX 609-5047XX 50 82.55 (3.250) 68.58 (2.700) 60.96 (2.400)
609-5607XX 609-5617XX 609-5647XX 56 90.17 (3.550) 76.20 (3.000) 68.58 (2.700)
609-6007XX 609-6017XX 609-6047XX 60 95.25 (3.750) 81.28 (3.200) 73.66 (2.900)
609-6407XX 609-6417XX 609-6447XX 64 100.33 (3.950) 86.36 (3.400) 78.74 (3.100)
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE SOCKETS
:See pages 9-13
Add suffix E for ejectors without strain relief; Add suffix ES for ejectors with strain relief
Add “R” to part number for PCB retention feature.
HOLE DIA.
±.08 (±.003)
AFTER PLATING TYPE OF CONTACT
.89 (.035) PCB Solder Tails
1.14 (.045) Wrap Post Tails
609 - XX XX
# of Positions
E (Ejector)
ES Ejector for Strain Relief
Tail Style
R (PCB Retention)
IDC Systems
Headers
38
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
FLEX-FIT™ COMPLIANT
CONTACT HEADERS WITH
RETAINER/EJECTOR
OPTIONS
.100" x .100" CENTERS
Ordering Information
STANDARD WITH STYLE 1 WITH STYLE 2 NO. DIMENSIONS IN MM (INCHES)
W/O EJECTOR EJECTOR EJECTOR OF POS. A B C D
609-10400-2 609-10410-2 609-10420-2 10 32.00 (1.260) 17.53 (.690) 10.16 (.400) 27.94 (1.100)
609-14400-2 609-14410-2 609-14420-2 14 37.08 (1.460) 22.61 (.890) 15.24 (.600) 33.02 (1.300)
609-16400-2 609-16410-2 609-16420-2 16 39.62 (1.560) 25.15 (.990) 17.78 (.700) 35.56 (1.440)
609-20400-2 609-20410-2 609-20420-2 20 44.70 (1.760) 30.23 (1.190) 22.86 (.900) 40.64 (1.600)
609-26400-2 609-26410-2 609-26420-2 26 52.32 (2.060) 37.85 (1.490) 30.48 (1.200) 48.26 (1.900)
609-34400-2 609-34410-2 609-34420-2 34 62.48 (2.460) 48.01 (1.890) 40.64 (1.600) 58.42 (2.300)
609-40400-2 609-40410-2 609-40420-2 40 70.10 (2.760) 55.63 (2.190) 48.26 (1.900) 66.04 (2.600)
609-50400-2 609-50410-2 609-50420-2 50 82.80 (3.260) 68.33 (2.690) 60.96 (2.400) 78.74 (3.100)
609-60400-2 609-60410-2 609-60420-2 60 95.50 (3.760) 81.03 (3.190) 73.66 (2.900) 91.44 (3.600)
609-64400-2 609-64410-2 609-64420-2 64 100.58 (3.960) 86.11 (3.390) 78.74 (3.100) 96.52 (3.800)
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
PCB T
HICKNESS
A
CCOMODATED
:.062" - .125"
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE SOCKETS
:See pages 9-13
A
PPLICATION
T
OOLING
889-H7XX (XX = # positions)
*Latching Ears can be ordered separately.
HOLE DIA. ±.08 (±.003) TYPE OF CONTACT
AFTER PLATING
1.02 (.040) Flex-Fit™
• Press fit with or without ejector latches in place.
• Ejector/latches can be post mounted.
STYLE 1 CAT # 609-0004E
LATCH USED W/O STRAIN RELIEF
STYLE 2 CAT # 609-0004ES
LATCH USED WITH STRAIN RELIEF
IDC Systems
Headers
39
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0
C
OLOR
:Blue
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over 50µ inches min. nickel in
contact zone; tin/lead over nickel in termination area.
PCB T
HICKNESS
A
CCOMODATED
:.062" - .125"
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:>1000 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE SOCKETS
:See pages 9-13
A
PPLICATION
T
OOLING
889-H7XX (XX = # positions)
Ordering Information
STANDARD WITH “E” WITH “ES” NO. DIMENSIONS IN MM (INCHES)
W/O EJECTORS EJECTOR EJECTOR OF POS. A A B C
W/EJECTOR W/O EJECTOR
609-10700-2 609-10710-2 609-10720-2 10 20.32 (0.800) 31.75 (1.250) 17.78 (.700) 10.16 (0.400)
609-14700-2 609-14710-2 609-14720-2 14 25.40 (1.000) 36.83 (1.450) 22.86 (0.900) 15.24 (0.600)
609-16700-2 609-16710-2 609-16720-2 16 27.94 (1.100) 39.37 (1.550) 25.40 (1.000) 17.78 (0.700)
609-20700-2 609-20710-2 609-20720-2 20 33.02 (1.300) 44.45 (1.750) 30.48 (1.200) 22.86 (0.900)
609-24700-2 609-24710-2 609-24720-2 24 38.10 (1.500) 49.53 (1.950) 35.56 (1.400) 27.94 (1.100)
609-26700-2 609-26710-2 609-26720-2 26 40.64 (1.600) 52.07 (2.050) 38.10 (1.500) 30.48 (1.200)
609-34700-2 609-34710-2 609-34720-2 34 50.80 (2.000) 62.23 (2.450) 48.26 (1.900) 40.64 (1.600)
609-36700-2 609-36710-2 609-36720-2 36 53.34 (2.100) 64.77 (2.550) 50.80 (2.000) 46.18 (1.700)
609-40700-2 609-40710-2 609-40720-2 40 58.42 (2.300) 69.85 (2.750) 55.88 (2.200) 48.26 (1.900)
609-44700-2 609-44710-2 609-44720-2 44 63.50 (2.500) 74.93 (2.950) 60.95 (2.400) 53.34 (2.100)
609-50700-2 609-50710-2 609-50720-2 50 71.12 (2.800) 82.55 (3.250) 68.58 (2.700) 60.96 (2.400)
609-56700-2 609-56710-2 609-56720-2 56 78.74 (3.100) 90.17 (3.550) 76.20 (3.000) 68.58 (2.700)
609-60700-2 609-60710-2 609-60720-2 60 83.82 (3.300) 95.25 (3.750) 81.28 (3.200) 73.66 (2.900)
609-64700-2 609-64710-2 609-64720-2 64 88.90 (3.500) 100.33 (3.950) 86.36 (3.400) 78.74 (3.100)
LOW-PROFILE
FLEX-FIT™ COMPLIANT
CONTACT HEADERS
.100" x .100" CENTERS
HOLE DIA. ±.08 (±.003) TYPE OF CONTACT
AFTER PLATING
1.02 (.040) Flex-Fit™
SURFACE MOUNT LOW
PROFILE PCB HEADER
.100" x .100" CENTERS
IDC Systems
Headers
40
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR92984 E60980
Ordering Information
CATALOG NO. DIMENSIONS IN MM (INCHES)
NUMBERS* OF POS. A B C D
SMH-06* 6 26.67 (1.050) 12.80 (.504) 5.08 (.200) 22.61 (.890)
SMH-08* 8 29.21 (1.150) 15.34 (.604) 7.62 (.300) 25.15 (.990)
SMH-10* 10 31.75 (1.250) 17.88 (.704) 10.16 (.400) 27.69 (1.090)
SMH-12* 12 34.29 (1.350) 20.42 (.804) 12.70 (.500) 30.23 (1.190)
SMH-14* 14 36.83 (1.450) 22.96 (.904) 15.24 (.600) 32.77 (1.290)
SMH-16* 16 39.37 (1.550) 25.50 (1.004) 17.78 (.700) 35.31 (1.390)
SMH-20* 20 44.45 (1.750) 30.58 (1.204) 22.86 (.900) 40.39 (1.590)
SMH-24* 24 49.53 (1.950) 35.66 (1.404) 27.94 (1.100) 45.47 (1.790)
SMH-26* 26 52.07 (2.050) 38.20 (1.504) 30.48 (1200) 48.00 (1.890)
SMH-30* 30 57.15 (2.250) 43.28 (1.704) 35.56 (1.400) 53.09 (2.090)
SMH-34* 34 62.23 (2.450) 48.36 (1.904) 40.64 (1.600) 58.17 (2.290)
SMH-40* 40 69.85 (2.750) 55.98 (2.204) 48.26 (1.900) 65.79 (2.590)
SMH-44* 44 74.93 (2.950) 61.06 (2.404) 53.34 (2.100) 70.87 (2.790)
SMH-50* 50 82.55 (3.250) 68.68 (2.704) 60.96 (2.400) 78.49 (3.090)
SMH-56* 56 90.17 (3.550) 76.30 (3.004) 68.58 (2.700) 86.11 (3.390)
SMH-60* 60 95.25 (3.750) 81.38 (3.204) 73.66 (2.900) 91.19 (3.590)
SMH-64* 64 100.33 (3.950) 86.46 (3.404) 78.74 (3.100) 96.27 (3.790)
* See part number matrix for complete product number
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass filled thermoplastic
rated UL 94V-0, infrared & vapor phase process
compatible.
C
OLOR
:Black
C
ONTACT
M
ATERIAL
:Phosphor bronze with 30µ
inches min. gold over nickel in termination area.
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:1 Amp
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms @ 500 VDC
D
IELECTRIC
S
TRENGTH
:> 500 VRMS @ sea level
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C TO 125°C
M
ATING
C
ONNECTORS
F
EMALE SOCKETS
:See pages 9-13
A
CCESSORIES
P
OLARIZING
K
EY
: See page 46
* Use xxxx xxx for mounting hole options.
SMH-XX Y 7 Z-2
SMH-T&B Series
Number of Positions
7-Low Profile
Plating Code
2 – 30 Microinches Gold
0 – No Ejector/Retainer
1 – Ejector/Retainer for use
without Strain Relief
2 – Ejector/Retainer for use
with Strain Relief
Mounted Style
2 – Mounting Hole
3 – Mounting Post
IDC Systems
Headers
41
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
SINGLE ROW PIN STRIP
HEADERS (STRAIGHT)
.100" CENTERS
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass reinforced thermoplastic,
rated 94V-0
C
OLOR
:Black
O
XYGEN
I
NDEX
:32
C
ONTACT
M
ATERIAL
:Copper alloy, gold or tin/lead
plating over nickel
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:3 Amps/pin
I
NSULATION
R
ESISTANCE
:>1 x 10
9
Ohms
D
IELECTRIC
S
TRENGTH
:>1000 VAC
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C to 125˚C
LR49571 E60980
Ordering Information
NUMBER OF CATALOG NO.
POSITIONS SPECIFY W, X A B
1 PS-01SS-WXA — 2.54 (.100)
2 PS-02SS-WXA 2.54 (.100) 5.01 (.200)
3 PS-03SS-WXA 5.08 (.200) 7.62 (.300)
4 PS-04SS-WXA 7.62 (.300) 10.16 (.400)
5 PS-05SS-WXA 10.16 (.400) 12.70 (.500)
6 PS-06SS-WXA 12.70 (.500) 15.24 (.600)
7 PS-07SS-WXA 15.24 (.600) 17.78 (.700)
8 PS-08SS-WXA 17.78 (.700) 20.32 (.800)
9 PS-09SS-WXA 20.32 (.800) 22.86 (.900)
10 PS-10SS-WXA 22.86 (.900) 25.40 (1.000)
11 PS-11SS-WXA 25.40 (1.000) 27.94 (1.100)
12 PS-12SS-WXA 27.94 (1.100) 30.48 (1.200)
13 PS-13SS-WXA 30.48 (1.200) 33.02 (1.300)
14 PS-14SS-WXA 33.02 (1300) 35.56 (1.400)
15 PS-15SS-WXA 35.56 (1.400) 38.10 (1.500)
16 PS-16SS-WXA 38.10 (1.500) 40.64 (1.600)
17 PS-17SS-WXA 40.64 (1.600) 43.18 (1.700)
18 PS-18SS-WXA 43.18 (1.700) 45.72 (1.800)
19 PS-19SS-WXA 45.72 (1.800) 48.26 (1.900)
20 PS-20SS-WXA 48.26 (1.900) 50.80 (2.000)
21 PS-21SS-WXA 50.80 (2.000) 53.34 (2.100)
22 PS-22SS-WXA 53.34 (2.100) 55.88 (2.200)
23 PS-23SS-WXA 55.88 (2.200) 58.42 (2.300)
24 PS-24SS-WXA 58.4212.300) 60.96 (2.400)
25 PS-25SS-WXA 60.96 (2.400) 63.50 i2.500)
26 PS-26SS-WXA 63;50 (2.500) 66.04 (2.600)
27 PS-27SS-WXA 66.04 (2.600) 68.58 (2.700)
28 PS-28SS-WXA 68.58 (2.700) 71.12 (2.800)
29 PS-29SS-WXA 71.12 (2.800) 73.66 (2.900)
30 PS-30SS-WXA 73.66 (2.900) 76.20 (3.000)
31 PS-31SS-WXA 76.20 (3.000) 78.74 (3.100)
32 PS-32SS-WXA 78.74 (3.100) 81.28 (3.200)
33 PS-33SS-WXA 81.28 (3.2001 83.82 (3.300)
34 PS-34SS-WXA 83.82 (3.300) 86.36 (3.400)
35 PS-35SS-WXA 86.36 (3.400) 88.90 (3.500)
36 PS-36SS-WXA 88.90 (3.500) 91.44 (3.600)
37 PS-37SS-WXA 91.44 (3.600) 93.98 (3.700)
38 PS-38SS-WXA 93.98 (3.700) 96.52 (3.800)
39 PS-39SS-WXA 96.52 (3.800) 99.06 (3.900)
40 PS-40SS-WXA 99.06 (3.900) 101.6 (4.000)
eg. PS-40SS-TBA
W INTERFACE PLATING
G 10 µ" gold over nickel
H 30µ" gold over nickel
T 100µ" tin/lead over nickel
X MATING LENGTH
A 8.1 (.318)
B 5.8 (.230)
42
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
IDC Systems
Headers
SINGLE ROW PIN STRIP
HEADERS (RIGHT ANGLE)
.100" CENTERS
LR49571 E60980
Ordering Information
NUMBER OF CATALOG NO.
POSITIONS SPECIFY W, X A B
1 PS-01SR-WXA — 2.54 (.100)
2 PS-02SR-WXA 2.54 (.100) 5.01 (.200)
3 PS-03SR-WXA 5.08 (.200) 7.62 (.300)
4 PS-04SR-WXA 7.62 (.300) 10.16 (.400)
5 PS-0SSR-WXA 10.16 (.400) 12.70 (.500)
6 PS-06SR-WXA 12.70 (.500) 15.24 (.600)
7 PS-07SR-WXA 15.24 (.600) 17.78 (.700)
8 PS-08SR-WXA 17.78 (.700) 20.32 (.800)
9 PS-09SR-WXA 20.32 (.800) 22.86 (.900)
10 PS-10SR-WXA 22.86 (.900) 25.40 (1.000)
11 PS-11SR-WXA 25.40 (1.000) 27.94 (1.100)
12 PS-12SR-WXA 27.94 (1.100) 30.48 (1.200)
13 PS-13SR-WXA 30.48 (1.200) 33.02 (1.300)
14 PS-14SR-WXA 33.02 (1300) 35.56 (1.400)
15 PS-15SR-WXA 35.56 (1.400) 38.10 (1.500)
16 PS-16SR-WXA 38.10 (1.500) 40.64 (1.600)
17 PS-17SR-WXA 40.64 (1.600) 43.18 (1.700)
18 PS-18SR-WXA 43.18 (1.700) 45.72 (1.800)
19 PS-19SR-WXA 45.72 (1.800) 48.26 (1.900)
20 PS-20SR-WXA 48.26 (1.900) 50.80 (2.000)
21 PS-21SR-WXA 50.80 (2.000) 53.34 (2.100)
22 PS-22SR-WXA 53.34 (2.100) 55.88 (2.200)
23 PS-23SR-WXA 55.88 (2.200) 58.42 (2.300)
24 PS-24SR-WXA 58.4212.300) 60.96 (2.400)
25 PS-25SR-WXA 60.96 (2.400) 63.50 i2.500)
26 PS-26SR-WXA 63;50 (2.500) 66.04 (2.600)
27 PS-27SR-WXA 66.04 (2.600) 68.58 (2.700)
28 PS-28SR-WXA 68.58 (2.700) 71.12 (2.800)
29 PS-29SR-WXA 71.12 (2.800) 73.66 (2.900)
30 PS-30SR-WXA 73.66 (2.900) 76.20 (3.000)
31 PS-31SR-WXA 76.20 (3.000) 78.74 (3.100)
32 PS-32SR-WXA 78.74 (3.100) 81.28 (3.200)
33 PS-33SR-WXA 81.28 (3.2001 83.82 (3.300)
34 PS-34SR-WXA 83.82 (3.300) 86.36 (3.400)
35 PS-35SR-WXA 86.36 (3.400) 88.90 (3.500)
36 PS-36SR-WXA 88.90 (3.500) 91.44 (3.600)
37 PS-37SR-WXA 91.44 (3.600) 93.98 (3.700)
38 PS-38SR-WXA 93.98 (3.700) 96.52 (3.800)
39 PS-39SR-WXA 96.52 (3.800) 99.06 (3.900)
40 PS-40SR-WXA 99.06 (3.900) 101.6 (4.000)
eg. PS-40SR-TBA
W INTERFACE PLATING
G 10 µ" gold over nickel
H 30µ" gold over nickel
T 100µ" tin/lead over nickel
X MATING LENGTH
A 8.1 (.318)
B 5.8 (.230)
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass reinforced thermoplastic,
rated 94V-0
C
OLOR
:Black
O
XYGEN
I
NDEX
:32
C
ONTACT
M
ATERIAL
:Copper alloy, gold or tin/lead
plating over nickel
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:3 Amps/pin
Insulation Resistance >1 x 10
9
Ohms
Dielectric Strength >1000 VAC
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C to 125˚C
2.9
(.114)
DUAL ROW
PIN STRIP HEADERS
STRAIGHT
.100" x .100" CENTERS
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass reinforced thermo-
plastic, rated 94V-0
C
OLOR
:Black
O
XYGEN
I
NDEX
:32
C
ONTACT
M
ATERIAL
:Copper alloy, gold or tin/lead
plating over nickel
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:3 Amps/pin
I
NSULATION
R
ESISTANCE
:> 1 x 10
9
Ohms
D
IELECTRIC
S
TRENGTH
:> 1000 VAC
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:-55˚C to 125˚C
IDC Systems
Headers
43
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR49571 E60980
W INTERFACE PLATING
G 10 µ" gold over nickel
H 30µ" gold over nickel
T 100µ" tin/lead over nickel
X MATING LENGTH
A 8.1 (.318)
B 5.8 (.230)
Ordering Information
NUMBER OF CATALOG NO. A B
POSITIONS SPECIFY W, & X
2 PS-02DS-WXA 2.54 (1.00) 5.08 (.200)
4 PS-04DS-WXA 7.62 (.300) 10.16 (.400)
6 PS-06DS-WXA 12.70 (.500) 15.24 (600)
8 PS-08DS-WXA 17.78 (.700) 20.32 (.800)
10 PS-10DS-WXA 22.86 (.900) 25.40 (1.000)
12 PS-12DS-WXA 27.94 (1.100) 30.48 (1.200)
14 PS-14DS-WXA 33.02 (1.300) 35.56 (1.400)
16 PS-16DS-WXA 38.10 (1.500) 40.64 (1.600)
18 PS-18DS-WXA 43.18 (1.700) 45.72 (1.800)
20 PS-20DS-WXA 48.26 (1.900) 50.80 (2.000)
22 PS-22DS-WXA 53.34 (2.100) 55.88 (2.200)
24 PS-24DS-WXA 58.42 (2.300) 60.96 (2.400)
26 PS-26DS-WXA 63.50 (2.500) 66.04 (2.600)
28 PS-28DS-WXA 68.58 (2.700) 71.12 (2.800)
30 PS-30DS-WXA 73.66 (2.900) 76.20 i3.000)
32 PS-32DS-WXA 78.74 (3.100) 81.28 (3.200)
34 PS-34DS-WXA 83.82 (3.300) 86.36 (3.400)
36 PS-36DS-WXA 88.90 (3.500) 91.44 (3.600)
38 PS-38DS-WXA 93.98 (3.700) 96.52 (3.800)
40 PS-40DS-WXA 99.06 (3.900) 101.60 (4.000)
42 PS-42DS-WXA 104.14 (4.100) 106.68 (4.200)
44 PS-44DS-WXA 109.22 (4.300) 111.76 (4.400)
46 PS-46DS-WXA 114.30 (4.500) 116.84 (4.600)
48 PS-48DS-WXA 119.38 (4.700) 121.92 (4.800)
50 PS-50DS-WXA 124.46 (4.900) 127.00 (5.000)
52 PS-52DS-WXA 129.54 (5.100) 132.08 (5.200)
54 PS-54DS-WXA 134.62 (5.300) 137.16 (5.400)
56 PS-56DS-WXA 139.70 (5.500) 142.24 (5.600)
58 PS-58DS-WXA 144.78 (5.700) 147.32 (5.800)
60 PS-60DS-WXA 149.86 (5.900) 152.40 (6.000)
62 PS-62DS-WXA 154.94 (6.100) 157.48 (6.200)
64 PS-64DS-WXA 160.02 (6.300) 162.56 (6.400)
66 PS-66DS-WXA 165.10 (6.500) 167.64 (6.600)
68 PS-68DS-WXA 170.18 (6.700) 172.72 (6.800)
70 PS-70DS-WXA 175.26 (6.900) 177.80 (7.000)
72 PS-72DS-WXA 180.34 (7.100) 182.88 (7.200)
74 PS-74DS-WXA 185.42 (7.300) 187.96 (7.400)
76 PS-76DS-WXA 190 50 (7.500) 193.04 (7.600)
78 PS-78DS-WXA 195.58 (7.700) 198.12 (7.800)
80 PS-80DS-WXA 200.66 (7.900) 203.20 (8.000)
eg. PS-80DS-TBA
DUAL ROW
PIN STRIP HEADERS
RIGHT ANGLE
.100" x .100" CENTERS
P
HYSICAL
P
ROPERTIES
I
NSULATION
M
ATERIAL
:Glass reinforced thermo-
plastic, rated 94V-0
C
OLOR
:Black
O
XYGEN
I
NDEX
:32
C
ONTACT
M
ATERIAL
:Copper alloy, gold or tin/lead
plating over nickel
E
LECTRICAL
P
ROPERTIES
C
URRENT
R
ATING
:3 Amps/pin
I
NSULATION
R
ESISTANCE
:> 1 x 10
9
Ohms
D
IELECTRIC
S
TRENGTH
:> 1000 VAC
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE
R
ATING
:–55˚C to 125˚C
IDC Systems
Headers
44
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches).
LR49571 E60980
Ordering Information
NUMBER OF CATALOG NO. A B
POSITIONS SPECIFY W, & X
2 PS-02DR-WXA 2.54 (1.00) 5.08 (.200)
4 PS-04DR-WXA 7.62 (.300) 10.16 (.400)
6 PS-06DR-WXA 12.70 (.500) 15.24 (600)
8 PS-08DR-WXA 17.78 (.700) 20.32 (.800)
10 PS-10DR-WXA 22.86 (.900) 25.40 (1.000)
12 PS-12DR-WXA 27.94 (1.100) 30.48 (1.200)
14 PS-14DR-WXA 33.02 (1.300) 35.56 (1.400)
16 PS-16DR-WXA 38.10 (1.500) 40.64 (1.600)
18 PS-18DR-WXA 43.18 (1.700) 45.72 (1.800)
20 PS-20DR-WXA 48.26 (1.900) 50.80 (2.000)
22 PS-22DR-WXA 53.34 (2.100) 55.88 (2.200)
24 PS-24DR-WXA 58.42 (2.300) 60.96 (2.400)
26 PS-26DR-WXA 63.50 (2.500) 66.04 (2.600)
28 PS-28DR-WXA 68.58 (2.700) 71.12 (2.800)
30 PS-30DR-WXA 73.66 (2.900) 76.20 i3.000)
32 PS-32DR-WXA 78.74 (3.100) 81.28 (3.200)
34 PS-34DR-WXA 83.82 (3.300) 86.36 (3.400)
36 PS-36DR-WXA 88.90 (3.500) 91.44 (3.600)
38 PS-38DR-WXA 93.98 (3.700) 96.52 (3.800)
40 PS-40DR-WXA 99.06 (3.900) 101.60 (4.000)
42 PS-42DR-WXA 104.14 (4.100) 106.68 (4.200)
44 PS-44DR-WXA 109.22 (4.300) 111.76 (4.400)
46 PS-46DR-WXA 114.30 (4.500) 116.84 (4.600)
48 PS-48DR-WXA 119.38 (4.700) 121.92 (4.800)
50 PS-50DR-WXA 124.46 (4.900) 127.00 (5.000)
52 PS-52DR-WXA 129.54 (5.100) 132.08 (5.200)
54 PS-54DR-WXA 134.62 (5.300) 137.16 (5.400)
56 PS-56DR-WXA 139.70 (5.500) 142.24 (5.600)
58 PS-58DR-WXA 144.78 (5.700) 147.32 (5.800)
60 PS-60DR-WXA 149.86 (5.900) 152.40 (6.000)
62 PS-62DR-WXA 154.94 (6.100) 157.48 (6.200)
64 PS-64DR-WXA 160.02 (6.300) 162.56 (6.400)
66 PS-66DR-WXA 165.10 (6.500) 167.64 (6.600)
68 PS-68DR-WXA 170.18 (6.700) 172.72 (6.800)
70 PS-70DR-WXA 175.26 (6.900) 177.80 (7.000)
72 PS-72DR-WXA 180.34 (7.100) 182.88 (7.200)
74 PS-74DR-WXA 185.42 (7.300) 187.96 (7.400)
76 PS-76DR-WXA 190 50 (7.500) 193.04 (7.600)
78 PS-78DR-WXA 195.58 (7.700) 198.12 (7.800)
80 PS-80DR-WXA 200.66 (7.900) 203.20 (8.000)
eg. PS-80DR-TBA
W INTERFACE PLATING
G 10 µ" gold over nickel
H 30µ" gold over nickel
T 100µ" tin/lead over nickel
X MATING LENGTH
A 8.1 (.318)
B 5.8 (.230)
